Free Energy | searching for free energy and discussing free energy

builders board => General Builders discussion => Topic started by: WhatIsIt on September 07, 2020, 04:09:59 AM

Title: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 07, 2020, 04:09:59 AM

Take a shelterr from the storm!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 07, 2020, 04:47:43 AM

About that cop 1.7?

Is it possible that they measured cop 1.7 on wrong side, source side?

Mistakes happened before.
It is nothing unusual.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 07, 2020, 04:56:53 AM



No,


There is scientific method of measurement.


They look straight to bulb for half an hour,
then measure time how long they are blind.


It can vary with color of eyes, but not much.


There is copy paste salesman down the hall, and rain of BS,
at least there is no rain here.


Nice place you have here.
You painted the walls by yourself?

Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 07, 2020, 04:06:11 PM
About that cop 1.7?

Is it possible that they measured cop 1.7 on wrong side, source side?

Mistakes happened before.
It is nothing unusual.

Well, now that you mention it, if one studies Chris' videos, it appears he is measuring only on the output stages with no consideration for the input.  Based on this observation, I built a test device around the info he has given publicly on an AMCC-200 metglas core and the best COP was ~.7 that is Pout/Pin. 

I challenge any claims he or his group has regarding self runners or COP=1.7 or anything >COP=1!

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 07, 2020, 08:25:38 PM

3 independent replications of bucking coil experiment.

All 3 resulted in cop < 1

1. Partzman
2. Gear
3. Myself

Partzman and Gear are experienced researchers and I have no doubt in their results.

In my case, I looped output to source, feedback line.
Then I measured power on source and feedback line,
which resulted in very poor cop, much less than 1,
and I was thinking that I did something wrong in assembly of device,
so I was not sure if I made device correctly.

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 08, 2020, 12:22:36 AM

What is worth to have round wheels if they are not turning?
Just hold it in hands forever?

We saw three Videos: COP = 1.89

https://youtu.be/sDFvKJCW9WI
https://youtu.be/vMXaA0zlb-M
https://youtu.be/pioohhRyfHk

Those videos are Tinman property, and you probably dont even know how it works.

You would like to steal it from Tinman, but you cant even replicate that.

Nobody from aboveunity.com supported your claim.
I wonder why?
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 08, 2020, 02:02:00 AM


Is the latest edition of copy paste material released?


Now when challenged to measure his experiment,
I have the feeling that Chris will flee quickly,
as far as he can.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 08, 2020, 02:31:52 AM
Chris posted Tinmans videos as proof.

He could post Kapanadze videos as proof,
just as Tinmans videos,
it is the same thing.

But there is nowhere his work with proofs!
The missing link.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 08, 2020, 03:45:01 AM

Is the latest edition of copy paste material released?


Now when challenged to measure his experiment,
I have the feeling that Chris will flee quickly,
as far as he can.

Chris can not measure his experiment,
because he knows the outcome,
all of this was game for him to gain popularity and followers,
and I suppose he will now run away filled with anger.

Anger, which his members will experience on their skin,
for his failure.
It will be worse than concentracion camp on his web site for a while.
Lots of accusing and banning.

Well, OnePower was right.
Leave it to time.
Time always tells.

Time will tell the price which must be paid - Jova Radevska
https://youtu.be/Ec3AiSJpVF4

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 09, 2020, 07:20:36 AM



Can we establish some rules to this caffe?


1. Ranting - allowed
It is the purpose of the caffe.


2. Moderating - forbidden
Total freedom of speech.


3. Cursing - partially allowed
Allowed, if the coursing does not repeat frequently.


Now when the sun shines, 24 / 7 starts.
Free drink for everyone!




Welcome to the caffe Asylum!




Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 09, 2020, 09:43:27 AM
Electronic Covid 19 resonant frequency smasher.

https://osf.io/d2vha/


Frequencies 171.160 Hz, 174.989 Hz, and 1185.131 Hz useful in combating COVID-19

publisher does not give derails
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 09, 2020, 10:35:02 PM



I been following this drama about H technology,
and it just ocuured to me.


Is it possible that Stanley Meyer made FE device,
and that he belived that he found a way for better
extraction of hydrogen?


But actually he made FE runner?
And whole time FE device is cause
for that much hydrogen production!


Or maybe he knew that he have FE device,
but wanted to make money on H tech first,
and after that on FE device alone.
Twice the money.


That could explain a lot?

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 10, 2020, 12:07:44 AM



When I look at all of those FE devices,


Steven Mark had nice HV output, nice long spark.
Kapanadze has HV and step it down for usage.
Don Smith played with HV,


HV was involved in all of this cases,
which narrows down search to cheap creation of HV.


My work is mostly related to investigation of resonant tank circuits,
and search for method which can steal energy from resonant circuits,
without killing resonance.
Perpendicular coils and similar.


All the self runners are connected to HV,
one way or another, or HV is part of their operational principle.



Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 10, 2020, 12:42:32 AM



Its getting cold here!


It must be that winter is comming.


And it looks like that help is needed after all.
No luck with Elite super advanced group?


Usual procedure.
Involve person, steal his work, dump that person like a trash!
H2OPower was example how it works.


Poor fellow EmJunkie,
he wanted to light up the darkness,
and save the world!
But he could not find switch in the dark,
and still cant!
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 10, 2020, 02:37:43 AM
[/font]We already know how to do this!Evidence is a pathway forward, listening to Clowns that have an IQ less than a pet dog is not! This is so simple, there is no complication here!
Very simple Science involved, no more than basic High School Science is required!Best wishes, stay safe and well in these dire times,   Chris Sykes
[/font]


If the science is so simple,
what stops you from making cop > 1 ?


You know why is number 3 important?
Because it is the same finger on both hands,
no matter left or right!


Show us how simple it is.

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 10, 2020, 01:43:09 PM



More information can be found at: www.aboveunity.com (http://www.aboveunity.com/)

The real Free Forum, Where Trolls are instantly BANNED!

Be part of something Better!


Best wishes, stay safe and well in these dire times,   


Chris Sykes




Advertising and Milking bussiness is going as usual, nothing changed.

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 11, 2020, 01:27:09 AM


What do we think about when one says Pythagoras?
Do we think of a Right Angle Triangle?
The Pythagorean Theorem: A2 + B2 = C2 the Right Angle Triangle.


Far too many brainless clowns here!
Clowns with nothing, and no possibility of ever Succeeding!


Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!


This is so simple, there is no complication here!
Very simple Science involved, no more than basic High School Science is required! I have shown you how to do it, see the above post!


Success = Hard work + Understanding!


Best wishes, stay safe and well in these dire times,   Chris Sykes



I did not know that
voltage over time = power


It seems that new technologies will emerge based on new math.

This is so simple says author and inventor, just as proper measuring.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 11, 2020, 02:23:57 AM


Some here are so DUMB!
They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!
Clown Idiots!


I am so embarrassed to see a fellow human being oose so much DUMB!
Bought and Paid for Shills! Paid Liars and Disinformation Trolls!


Best wishes, stay safe and well in these dire times,   Chris Sykes





POWER = VOLTAGE OVER TIME , author says.
A new advanced power equation.


It seems that author is upset little bit about revealing his new science.

The author deletes his posts faster that it can be read properly,
and new science understood.


Maybe the bucking coils works on those principles,
but that is something which needs to be confirmed by the inventor himself.

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 11, 2020, 03:11:58 AM


Great advertising, thank You v8karlo!


Best wishes, stay safe and well in these dire times,
   Chris Sykes



No problem, glad to help.


Your power equation is simple and beautiful.

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 11, 2020, 09:22:31 AM


The link to the Thread: Some Coils Buck and some Coils DONT (http://www.aboveunity.com/thread/some-coils-buck-and-some-coils-dont/) can help in this replication!

Or if you are confident: Chris's Non-Inductive Coil Experiment (http://www.aboveunity.com/thread/non-inductive-experiment/) move up with the big boys!

Become an Experienced Researcher! Learn valuable information!


Best wishes, stay safe and well in these dire times,   Chris Sykes


"Some coils buck, and some coils dont!"
That is very scientific explanation and sounds like promise to failure.

I followed the link you provided to your web page and saw
that nobody replicated that, only one person.
You wrote that.
You are posting and experimenting here, but all links are rerouting
to your web page, off course.


You said before that many replicated your work and lots of them
are aboveunity?
And now, there is your statement that nobody replicated your work?

You posted the link, and probably forgot to delete that statement.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 11, 2020, 10:25:26 AM


4.3K Views,
 its got plenty of reads now, a lot more than the Parrots tiny thread: 800  :-[     60+ times refreshing a day, and only him posting, 800 reads is all his reads! A real life Super Hero to say the least hahahaha!!!


Topic: Partnered Output Coils - Free Energy - Read
2342437 times - but keep trying!


Best wishes, stay safe and well in these dire times,   Chris Sykes




So, you admit that your desire is to reroute trafic from here to
your web site in order to have there 2342437 views instead 4300 views which
you currently have on your web site.


Looking at those numbers, I understand how tempting that must be for you.
While we can forget about experiment here you promised.




I can see that you deleted again your posts to hide the truth.
But they remain here in Asylum so everyone can see them.
You can not delete here.


Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 11, 2020, 12:43:43 PM
The "Power Triangle" exists,but as demonstration from active/reactive/apparent power relationship and to get the " Power Factor,positive = to load or negative = back to source  "shown  !
Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 11, 2020, 09:15:12 PM
Looks like EMJunkie has deleted the post. I attach a screenshot. He makes an error just below the image. I don't think math in his strong suit.
bi

{edit} oops, my bad. He didn't delete it. It's still on his forum, aboveunity_com. Anyway, perhaps he can explain 2/3rds.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 11, 2020, 10:42:23 PM
Chris,

There is a ground problem in the schematic you have recently supplied on one of your moderated threads and that is, you have crossed grounds!  According to the wiring pic you have posted on your forum as shown below, the scope grounds are connected to the positive terminal of your 'lytic cap and the signal generator ground is connected to the negative terminal of said cap.  If you are not floating your power supply, sig gen, and scope, your resultant measurements could be all over the place!

When using conventional grounding that is, the source of the mosfet driver is the common ground, this circuit produces a COP = .73 with a 100 ohm 1% fixed resistive load and it matters not if the coils are connected in a bucking or aiding mode, same results!

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 12, 2020, 12:25:42 AM
After 3 momths of waiting to Chris make his experimemt,
and he avoids it, advertising his site all the time,

It is time for Chris to be banned!

His behavioir can not be tolerated any more.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 12, 2020, 12:32:02 AM

Every chances is been giving to Chris,

without any effect.

It is time to end this sad story.

Banning is only option left.
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 12, 2020, 02:37:36 AM
Whatisit
Quote
Every chances is been giving to Chris,
without any effect.
It is time to end this sad story.
Banning is only option left.

No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 12, 2020, 02:47:52 AM
partzman
Quote
There is a ground problem in the schematic you have recently supplied on one of your moderated threads and that is, you have crossed grounds!  According to the wiring pic you have posted on your forum as shown below, the scope grounds are connected to the positive terminal of your 'lytic cap and the signal generator ground is connected to the negative terminal of said cap.  If you are not floating your power supply, sig gen, and scope, your resultant measurements could be all over the place!

All over the place is a polite term. In fact if the ground is floating or at lower voltages cross coupled or making a series connection within the circuit it means little if nothing. First, we need to know exactly what it is were measuring, then determining were measuring it correctly and then verifying the measure is correct. It's not as simple as many think it is and if HF or HV are involved it gets that much harder to determine what's actually happening.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 12, 2020, 08:44:36 AM

I have never given measurements,

never will,

not here anyway!

I have only ever shown one device that is capable of going,
and I never gave measurements on that either!

Best wishes, stay safe and well in these dire times,
   Chris Sykes


You lost all of your credits, and can only howl on the moon!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 12, 2020, 08:57:23 AM


Whatisit

Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 12, 2020, 09:07:02 AM
Whatisit
No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards

Maybe it isnt!

There is a conflict of interests here.

Emjunkie runs his own web page and he is using OU.com
for his own benefit,
and making damage to OU.com.

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 12, 2020, 09:12:58 AM
Stoppen Sie das sinnlose Geräusch! Du machst es besser, Mach ein Video Felix
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 12, 2020, 09:32:36 AM
das gleiche gilt für deinen Partner, du machst es selbst besser! so viel sinnloser Lärm!
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 12, 2020, 09:57:29 AM

Actually, you are right Fritz.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 12, 2020, 11:11:52 AM
Quote from: TinselKoala

 This first paragraph on the linked page is a real turn-off, and doesn't reflect the actual TRUTH of the events of the past month or so, in this forum and at OU dot com.
 
 "Quote Chris"
 I have spent the last three weeks trying to help people see what I have seen on various forums! Many hours of dedicated help to others that are trying to replicate what I am getting. I have seen nothing but total MORONS but in, on conversations that they were not part of, and utterly ruin it for everyone else! I have never in my life seen such arrogance, rudeness, mentally demanding selfish demented mess of Colostomy Bags in my life! It seems I have been outright hounded to the point of giving up on these totally useless people!
 
 It's a real shame for all! 30% of people ruin it for the other 60%! No wonder the other 10% don't come forward trying to show what they have working! These people are just morons! Selfish Morons!
 
 Well I tried to help, it seems it just cant be done!
 
 "End quote"
 
 EMJunkie was asked to provide support for his claims of overunity performance from his "partnered" coils, and never did.
 It seems that an exception was made to the clearly stated guidelines for participating on this forum, just for him.
 He did provide, finally, a schematic which indicated improper output measuring points but never deigned to provide actual measurements or confirmation that the "OU" he claimed was measured from that circuit using those points.
 Furthermore he never accounted for the contribution of the Function Generator or other source of drive current for the transistor in that circuit, which must be included as part of the total Input Power to such a circuit.
 
 Now, on a venue that he controls, he proceeds to insult, in the vilest terms possible, all those honest and dedicated researchers who freely gave him their time and efforts in an attempt to examine his claims and circuits. 
 He claims that he has tried to help people "replicate what he's getting" but he never specified what he's getting! He never showed the measurements or the exact circuits and procedures for getting the OU measurements.
 
 What he did show was improper use of his test equipment, a lack of understanding of some basic usage of the oscilloscope, a circuit that requires substantial drive power from a FG or other oscillator that was not accounted for in any input measurements he published, and a general disrespect and lack of regard for those people who dared ask him to support his claims with data.
 
 And the paragraph I have quoted above indicates that his attitude of non-cooperation, of being a "holier-than-thou" Guru of Overunity, of pretending to teach what he does not himself understand... has not changed in the least.
 
 I apologize for not yet making the videos of measurements I talked about in the post up above, I've been sidetracked by another project.
 
 But now, after reading that GARBAGE from EMJ, I really feel like chucking the whole thing in the GARBAGE... where it properly belongs.
 
 


Same thing was on the other forums.


WII, it is not worth any effort.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 12, 2020, 03:16:42 PM
partzman
All over the place is a polite term. In fact if the ground is floating or at lower voltages cross coupled or making a series connection within the circuit it means little if nothing. First, we need to know exactly what it is were measuring, then determining were measuring it correctly and then verifying the measure is correct. It's not as simple as many think it is and if HF or HV are involved it gets that much harder to determine what's actually happening.

Regards

Onepower,

Having given it more thought and reflecting on the circuit operation from my end, Chris is probably using a LAB for the supply although he shows a power supply and a battery operated sig gen.  If so, then he could have an earth ground from his scope as shown.  The circuit should operate the same no matter where the ground reference is located assuming there is no electron injection from earth ground, etc.

So, in my test the operating frequency was ~1kHz which just placed the inductors in what is normally called a discontinuous mode.  If operated higher, the currents become continuous and there will be steps in the current waveforms lowering efficiency even more.  At this frequency, one inductor has fully charged the 100ufd cap and has little current and the other has a triangular current waveform.  These are not the waveforms Chris shows.

However, Chris operates at ~82Hz which could possibly mean that the given lamp load has the ability to somewhat discharge the 1000ufd cap to the point that both coils now participate in the cap charging which I think will produce the waveforms Chris shows.  I will try this later today.

The question remains if the circuit is OU although he didn't really make this claim AFAIK.  The only possible gain mechanism for this device IMO would be the so called leakage inductance between the coils but this is questionable.

Many here may not be aware (although a few are) that the technology Chris has demonstrated all this time is not really his but was given to him by one Dr. A_____ who shall go un-named out of respect for his privacy.

Regards,
Pm

 
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 12, 2020, 06:23:16 PM
partzman
Quote
Having given it more thought and reflecting on the circuit operation from my end, Chris is probably using a LAB for the supply although he shows a power supply and a battery operated sig gen.  If so, then he could have an earth ground from his scope as shown.  The circuit should operate the same no matter where the ground reference is located assuming there is no electron injection from earth ground, etc.

From experience I have found things are not always as they seem. The other day I was working on some of my HV datalogging microcomputer circuits where I am measuring +/- potential, voltage and current of a DC source fluctuating from zero to well over 30kV. My reoccurring problem was that an open circuit induced high potential is not solely dependent on a proper Earth ground as many believe. It follows known laws with respect to charge density, polarity and parasitic capacitance thus any given leg of any circuit can have any potential difference across it skewing our measurements.

As it were, I found it impossible to accurately measure both voltage and current with one circuit and I had to build two distinct opto-isolated circuits in order to get accurate measurements. My first indication was a floating voltage of some 10kV on one current sensing leg designed to only measure current using an isolation transformer/opto-isolator. However the induced potential in that leg jumped over the transformer, bypassed my 6000v opto-isolator, traveled up one sensor leg and gave me a consistently false reading.

I should also point out I am measuring the point potential, voltage and current on a very large moving piece of equipment worth over $600k where the only true ground consists of a ground strap. Everything else is floating, discontinuous and generated at multiple points which is basically the worst case scenario few can seem to wrap there mind around hence the reason they called me in. Now imagine your in a room with possibly hundreds of AC or DC HV generators, all interacting with one another and you want to measure the point source and sum of the generated voltages and current... that's what I'm doing at the moment.

As you can imagine the systems shown here seem trivial by comparison. With these relatively low voltage systems with transient effects people are demonstrating I would suggest using an isolation transformer/opto-isolator or a well insulated hall effect sensor for current measurement. Well insulated opto-isolation on the voltage measurement end would also help reduce transient effects. Of course, all of this also has to be calibrated to the ranges of the measurements expected which is hard enough in itself.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 12, 2020, 08:35:19 PM
Quote from Chris on his moderated thread-

Quote
P.S: I see Partzman's thread: partzmans board ATL is now a private thread - Interesting indeed!

While here, trying to pick holes in others work, he hides his own!

Best wishes, stay safe and well in these dire times,
   Chris Sykes

Yes that is correct and it is no different than your own "private" area on your forum.  I don't "pick" holes in others work, I try to offer subjective info for those who appear to need it IMO and they can choose to use it or not.

I'm also challenging your work and claims that you have made through the years so you will either have to 'put up' or 'shut up'!

Pm


Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 12, 2020, 10:21:27 PM
Chris,

I have built and tested both your recent 2 coil and past 3 coil devices and I see no OU!  All the demeaning insults and innuendoes does not change that fact as far as I'm concerned.  You provide no proof of your OU claims in the form of valid measurements for all to see plus, you provide no proof of self-running devices as you also claim!

CONCLUSION- You have nothing!!!!

So why all the noise???

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 13, 2020, 06:11:02 AM
partzman
Quote
I have built and tested both your recent 2 coil and past 3 coil devices and I see no OU!  All the demeaning insults and innuendoes does not change that fact as far as I'm concerned.  You provide no proof of your OU claims in the form of valid measurements for all to see plus, you provide no proof of self-running devices as you also claim!
CONCLUSION- You have nothing!!!!
So why all the noise???

Unfortunately this is the new normal since donny trump and many other populist leaders got elected.

Now many of there followers are starting to gaslight others using the same methods and language. Gaslighting uses the following psychology...

1) Belittling and dehumanizing any critics.
This is used to portray others as weak or inferior and deflect away from there own weakness or ignorance on any given subject. The term is called "projection" and they accuse others of the things they believe themselves to be to avoid there own insecurities. The fallacy is "tu quoque"or having to engage with criticism by turning it back on the accuser, answering criticism with criticism.

2) Taking everything out of context and twisting the facts.
Donny trump is continually saying something stupid or false, denies he said it, then admits he may have said it but it wasn't what others thought, lol. The  fallacy is the "strawman" or misrepresenting someone's argument to make it easier to attack. As well as "moving the goal posts" and when caught in a lie they simply change the context of the lie.

3)Continuously repeating blatant lies then doubling down on them.
They are generally always lying but the lie is fluid and always changing to make others keep defending themselves instead of calling out the original lie. They tell one lie then cover it with another doubling down in many layers of lies until it becomes so confusing most just give up. It is basically a strategy of sheer repetition repeating the lie over and over and then changing the lie to overwhelm there critics.

Which begs the question... how do we win?.

Well we don't win, we can't win because were basically dealing with irrational and mentally unstable people. They will never back down or change there mind and the only course of action is to walk away or remove them from our lives. The thing to remember is that these people get off on victimizing others while claiming to be the victim. There drug of choice is to project and manipulate and if we deprive them of that they have no power over us.

I think it's kind of comical and I had many people, more so business people try and pull this bullshit on me in the past. I simply tell them to piss off now that I understand what there doing because there wasting my time and time has value. So yes, noise, lies and attention is there oxygen and if we cut that off they generally just go away and try harass someone else which is the best case scenario in my opinion.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 07:53:05 AM

Quote from: Itsu

 A first shot at this bucking coil configuration from EMJunkie; low output compared to the input, as expected with bucking coils
 
 The screenshot is a sweep from 50Hz (left) to 5KHz (right); blue input from SG (20Vpp), yellow output across a 100 Ohm carbon resistor (900mV).
 
 
 Video here:  https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be (https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be)
 
 
 Regards itsu
 
 

 Extended research of bucking coils has been made on
 https://www.overunityresearch.com/index.php?topic=2760.0

 After several modifications quided by Chris Emjunkie,
 whole project was failure and closed.
 
 Here are the videos of Itsu, trying to follow Emjunkie modifications,
 which all failed.
 
 Emjunkie can not say that nobody tried to listen to him and replicate his work.
 
 After the failure on overunityresearch.com Emjunkie moved here with same story.
 
 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be (https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be)
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be (https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be)
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be (https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be)
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be (https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be)
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be (https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be)
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be (https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be)
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be (https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be)
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be (https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be)
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be (https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be)
 
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 08:10:05 AM

 Extended research of bucking coils has been made on
 overunityresearch.com
 
 After several modifications quided by Chris Emjunkie,
 whole project was failure and closed.
 
 Here are the videos of Itsu, trying to follow Emjunkie modifications,
 which all failed.
 
 Emjunkie can not say that nobody tried to listen to him and replicate his work.
 
 After the failure on overunityresearch.com Emjunkie moved here with same story.
 
 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be (https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be)
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be (https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be)
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be (https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be)
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be (https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be)
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be (https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be)
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be (https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be)
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be (https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be)
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be (https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be)
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be (https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be)

Sie verschwenden wertvolle Zeit wie Ihr Partner, so viel Lärm und nichts Wertvolles. Hör auf mit dem dummen Lärm und hol dir einen Job oder so. niemand will auf deine Albernheit hören. Felix, sag es ihm. stop senseless noise do something better yourself. no one wants your noise
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 08:22:05 AM
Sie verschwenden wertvolle Zeit wie Ihr Partner, so viel Lärm und nichts Wertvolles. Hör auf mit dem dummen Lärm und hol dir einen Job oder so. niemand will auf deine Albernheit hören. Felix, sag es ihm. stop senseless noise do something better yourself. no one wants your noise
Fritz


Same tactics, same story, and the end probably will be the same.


https://www.overunityresearch.com/index.php?topic=2760.0 (https://www.overunityresearch.com/index.php?topic=2760.0)
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 08:31:56 AM
v8karlo, you should get a job or do better yourself. you are to noisy you do better
so viel Lärm und so wenig Potenzial, isst eine Wurst oder so
Fritz



No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 08:38:59 AM
v8karlo, you should get a job or do better yourself. you are to noisy you do better
so viel Lärm und so wenig Potenzial, isst eine Wurst oder so
Fritz


I am sorry Fritz, this is rant thread where we can discuss anything.


If it violates your way, just skeep it in future and dont read it.
I do not polute other threads, so the people like yourself can have peace while posting.



Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 08:42:11 AM

I am sorry Fritz, this is rant thread where we can discuss anything.


If it violates your way, just skeep it in future and dont read it.
I do not polute other threads, so the people like yourself can have peace while posting.

silly boy, read you violate rules
https://overunity.com/5554/terms-and-conditions/

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 08:55:49 AM
silly boy, read you violate rules
https://overunity.com/5554/terms-and-conditions/ (https://overunity.com/5554/terms-and-conditions/)


I read all of terms, and can not find your point.


Once again, if you dont like it, just dont read it.

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 08:58:24 AM
Quote from: Itsu

 A first shot at this bucking coil configuration from EMJunkie; low output compared to the input, as expected with bucking coils
 
 The screenshot is a sweep from 50Hz (left) to 5KHz (right); blue input from SG (20Vpp), yellow output across a 100 Ohm carbon resistor (900mV).
 
 
 Video here:  https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 
 Regards itsu
 
 

 Extended research of bucking coils has been made on
 overunityresearch.com
 
 After several modifications quided by Chris Emjunkie,
 whole project was failure and closed.
 
 Here are the videos of Itsu, trying to follow Emjunkie modifications,
 which all failed.
 
 Emjunkie can not say that nobody tried to listen to him and replicate his work.
 
 After the failure on overunityresearch.com Emjunkie moved here with same story.
 
 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 08:59:06 AM
Stefan is notified
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 09:14:37 AM
you violate rules
https://overunity.com/5554/terms-and-conditions/

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 09:31:20 AM

The inrush of trolls again.I look, but reading is pointless! What junk you write! You would be banned for off topic junk like that on our forum!


Chris banns all the trolls!

Fritz



After reading your 40+ posts I can se that you are personally attached to Chris.


Which explains your rant and trolling in caffe!


Will you notify Stefan about that?


Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 09:34:14 AM
my friend Stefan will deal with you. you break all the forum rules and no regard for others. post nothing related to Stefans forum
Fritz

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.



7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 09:37:45 AM
Wir werden Würstchen essen und Sie wegen Verstoßes gegen die Regeln verbieten
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 09:38:15 AM


You idiots! You should have listened!

Chris is right!

You people are either stupid, or paid shills!
Always have been to many shills here, shill foo is high here!


Fritz




Hello Chris, you are always using phrase "paid shills".

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 09:52:06 AM
Quote from: Emjunkie
Some here are so DUMB!
 They are NAZI Troll


Shills,


so dumb they don't even know they are working for the Nazi Party!
 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and


Paid for Shills!


Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!


Best wishes, stay safe and well in these dire times,
    Chris Sykes
 
 

 

 
 You idiots! You should have listened!
 
 
 Chris is right!
 
 
 You people are either stupid, or


paid shills!


 Always have been to many shills here, shill foo is high here!
 
 
 Fritz
 
 
 

 
 Hello Chris, you are always using phrase "paid shills".


Chris, you are playing nobody anymore.


Just spamming!

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 13, 2020, 09:57:26 AM







Fritz, My Friend,

Please do not risk your account for these people! I think you are right, Stefan will have a field day here.

Please, I ask you, do not get into trouble for my sake, I have a much bigger plan and these guys are already too far behind to catch up! They just are not smart enough to make any progress.

Lets keep our progress to ourselves, and we can sit back and watch them go down in a sinking ship.

Best wishes, stay safe and well in these dire times my Friend!
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 10:01:41 AM
Hello Chris or Fritz,


Welcome to Asylum!

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 10:05:56 AM


Can I serve you with something?


Perhaps with videos with real measurements of bucking coils?


We have other things on menu as well, if you like?
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 10:11:12 AM
Quote from: Itsu

 A first shot at this bucking coil configuration from EMJunkie; low output compared to the input, as expected with bucking coils
 
 The screenshot is a sweep from 50Hz (left) to 5KHz (right); blue input from SG (20Vpp), yellow output across a 100 Ohm carbon resistor (900mV).
 
 
 Video here:  https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 
 Regards itsu
 
 

 Extended research of bucking coils has been made on
 overunityresearch.com
 
 After several modifications quided by Chris Emjunkie,
 whole project was failure and closed.
 
 Here are the videos of Itsu, trying to follow Emjunkie modifications,
 which all failed.
 
 Emjunkie can not say that nobody tried to listen to him and replicate his work.
 
 After the failure on overunityresearch.com Emjunkie moved here with same story.
 
 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be
 
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 10:13:40 AM
my friend Stefan will deal with you. you break all the forum rules and no regard for others. post nothing related to Stefans forum
Fritz

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.



7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 10:16:00 AM


You can spam all day Fritz, but videos with real measurement will be served.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 10:25:05 AM
i am imitating you, but not breaking forum rules like you rant I am ranting all day long pointless noise like you
Fritz



Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.



7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 10:32:49 AM
Chris, what do you say throw another shrimp on the barbie
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 13, 2020, 10:37:37 AM
Chris, what do you say throw another shrimp on the barbie
Fritz






Hi Fritz,

Hahaha yes, that's an oldie but a goodie! Here is the video: https://www.youtube.com/watch?v=1_FyJug3wzU and another one https://www.youtube.com/watch?v=Xn_CPrCS8gs or one for these guys https://www.youtube.com/watch?v=2hOLm_k6eCs

Fair Dinkum Mate! Good old saying cobber!  ;) I love Germany too, Octoberfest here we come!

Best wishes, stay safe and well in these dire times my Friend!
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 10:47:33 AM
Ich freue mich auf Bier und Wurst, Trinken und eine weitere Garnele auf dem Barbie
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 13, 2020, 11:01:32 AM
my friend Stefan will deal with you. you break all the forum rules and no regard for others. post nothing related to Stefans forum
Fritz

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.



7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 13, 2020, 02:03:21 PM
#63 : "pretzel" ? In Germany : Bretzel /bavarian : Bretzn ,,f.e. Speyerer Bretzel-Fest

2020 there will not happen the Munich Oktoberfest,how sad for the alcoholics !

Ones,zwoa,gsuffa ! hicks ,oana ged noch,oana ged noch nei,....
Lieber Moasz-voll als maszvoll !  ::)
Personal Wiesn-suff-record : 9 humpen/Masz-Kruege content in 5 hours,okay : in the 80'

 
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 13, 2020, 03:33:11 PM
partzman
Unfortunately this is the new normal since donny trump and many other populist leaders got elected.

Now many of there followers are starting to gaslight others using the same methods and language. Gaslighting uses the following psychology...

1) Belittling and dehumanizing any critics.
This is used to portray others as weak or inferior and deflect away from there own weakness or ignorance on any given subject. The term is called "projection" and they accuse others of the things they believe themselves to be to avoid there own insecurities. The fallacy is "tu quoque"or having to engage with criticism by turning it back on the accuser, answering criticism with criticism.

2) Taking everything out of context and twisting the facts.
Donny trump is continually saying something stupid or false, denies he said it, then admits he may have said it but it wasn't what others thought, lol. The  fallacy is the "strawman" or misrepresenting someone's argument to make it easier to attack. As well as "moving the goal posts" and when caught in a lie they simply change the context of the lie.

3)Continuously repeating blatant lies then doubling down on them.
They are generally always lying but the lie is fluid and always changing to make others keep defending themselves instead of calling out the original lie. They tell one lie then cover it with another doubling down in many layers of lies until it becomes so confusing most just give up. It is basically a strategy of sheer repetition repeating the lie over and over and then changing the lie to overwhelm there critics.

Which begs the question... how do we win?.

Well we don't win, we can't win because were basically dealing with irrational and mentally unstable people. They will never back down or change there mind and the only course of action is to walk away or remove them from our lives. The thing to remember is that these people get off on victimizing others while claiming to be the victim. There drug of choice is to project and manipulate and if we deprive them of that they have no power over us.

I think it's kind of comical and I had many people, more so business people try and pull this bullshit on me in the past. I simply tell them to piss off now that I understand what there doing because there wasting my time and time has value. So yes, noise, lies and attention is there oxygen and if we cut that off they generally just go away and try harass someone else which is the best case scenario in my opinion.

Regards

Onepower,

Well said and I couldn't agree more!  I have wasted more time than I should have on this individual and the result is always the same.  So, I will leave him to his minions and they can take whatever path they choose!

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 13, 2020, 04:49:25 PM
Quote from: Itsu

 A first shot at this bucking coil configuration from EMJunkie; low output compared to the input, as expected with bucking coils
 
 The screenshot is a sweep from 50Hz (left) to 5KHz (right); blue input from SG (20Vpp), yellow output across a 100 Ohm carbon resistor (900mV).
 
 
 Video here:  https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 
 Regards itsu
 
 

 Extended research of bucking coils has been made on
 overunityresearch.com
 
 After several modifications quided by Chris Emjunkie,
 whole project was failure and closed.
 
 Here are the videos of Itsu, trying to follow Emjunkie modifications,
 which all failed.
 
 Emjunkie can not say that nobody tried to listen to him and replicate his work.
 
 After the failure on overunityresearch.com Emjunkie moved here with same story.
 
 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be
 

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 13, 2020, 08:46:46 PM
v8karlo
Quote
Hello Chris, you are always using phrase "paid shills".

It's a little creepy that he seems to be spamming multiple threads under multiple user names. Not unlike donny trump talking about himself in the third person, lol.

Quote
“Remember what happened during the [2016 New Hampshire primary]?” Trump said. “Trump should come in third or fourth, and we came in easily at number one.”
Trump on Russia: “Nobody’s been tougher on Russia then Donald Trump.”
Here he is congratulating himself, lol...The Apprentice was the #1 show on television last season on Sunday from 10 to 11 --- congratulations Donald!.

Maybe they might like a little Bipolar with that Cofeve?, lol.

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 13, 2020, 08:59:40 PM
Working down in NYC for a few days
Nasty stuff with all these hard feelings


Not talking about this thread either


How can we move forward here


Because one way or another we will


Question is how can we “ALL “
Move forward
?
Enuff fights !!


This is our community
Not “this “ forum or “ that” forum


We can do this !!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 06:02:56 AM
v8karlo
It's a little creepy that he seems to be spamming multiple threads under multiple user names. Not unlike donny trump talking about himself in the third person, lol.

Maybe they might like a little Bipolar with that Cofeve?, lol.

If you know Chris from before, then you realized that

banning Chris was good option.

Australian walking EGO which suffers from being "Great leader" at any costs.
And this is only beginning of his rampage.

But what Chat suggests is reality.

Move forward.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 06:04:10 AM
Working down in NYC for a few days
Nasty stuff with all these hard feelings


Not talking about this thread either


How can we move forward here


Because one way or another we will


Question is how can we “ALL “
Move forward
?
Enuff fights !!


This is our community
Not “this “ forum or “ that” forum


We can do this !!

You are right!

You have my vote "Yes".
Thats one.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 06:11:45 AM
All of this was necessary to strip down the masks!

Without the mask, with any action Chris will do damage only to himself,
and will stay in his pit forever.

Now when masks are down and everything is transparent,
Chet is right and move forward is the way.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 06:40:39 AM
The proof?

Are all of this videos. True research of bucking coils.
All failed!

EMjunkie, Chris must invent or show something new to attract the masses,

because this garbage can not sell any more.


 https://www.youtube.com/watch?v=QWdPYxvEDIA&feature=youtu.be
 
 https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 07:22:46 AM
silly boy, you think Chris owes you anything, you must be kidding you need to be banned we will eat sausages and drink beer watching Stefan ban you
you and your partner are noisy pointless posters that no one wants to see or hear go away
Fritz

Stefan please ban WhatIsIt/Felix and v8karlo/elmo for breaking forum rules

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 07:32:56 AM

Chet, OnePower,

You see what I am talking about?

He will just continue his rampage.

Today it is me, tomorrow some other member.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 07:36:28 AM
it works Tinman told you
can you not understand
do you not listen
can you make any more pointless noise with no evidence
I am telling you that Chris is right and it works
you post fail experiment but forget success, are you one eyed
Fritz

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 07:41:37 AM
so noisy and nothing to say
go away be constructive Felix
you do better
no one wants to listen to you
all off topic noise
Chris told you
onepower told you
ramset told you
so much pointless noise from you and your partner breaking forum rules
Stefan ban them for breaking rules
Fritz



Whatisit


No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 08:42:37 AM

And Chris, Emjunkie will continue to rampage,

until he destroys this forum!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 08:48:15 AM
you rampage yourself and no one wants to hear you, others want to hear Chris, his work is validayed, you have nothing
Fritz

And Chris, Emjunkie will continue to rampage,

until he destroys this forum!

it works Tinman told you
can you not understand
do you not listen
can you make any more pointless noise with no evidence
I am telling you that Chris is right and it works
you post fail experiment but forget success, are you one eyed


https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 09:12:34 AM

Fritz, or EM junk,

You are posting Tinmans work because you have nothing!

And it is not solid state bucking garbage you claim.
You dont even know the difference between solid state and rotational system.

Take your bucking garbage and rest in your pit.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:20:36 AM
Fritz, or EM junk,

You are posting Tinmans work because you have nothing!

And it is not solid state bucking garbage you claim.
You dont even know the difference between solid state and rotational system.

Take your bucking garbage and rest in your pit.

silly boy, you think Chris owes you anything, you think I owe you anything, you look sillier by the day, you have nothing and say everything, you are the only one rampaging here
Fritz

Stefan please ban WhatIsIt/Felix and v8karlo/elmo for breaking forum rules

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:24:27 AM
rant a sausage
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 14, 2020, 09:32:13 AM
Fritz or Emjunk,

This proves that your work on bucking coils is garbage.

You been lie for years to your members, making them fools.

Total garbage and crap.

Here your members can see what garbage you sell them!


https://www.youtube.com/watch?v=2z77u0ANfCI&feature=youtu.be
 
 https://www.youtube.com/watch?v=xr_4EgpBE7g&feature=youtu.be
 
 https://www.youtube.com/watch?v=r8kPvZK415w&feature=youtu.be
 
 https://www.youtube.com/watch?v=BZer32ZAvyg&feature=youtu.be
 
 https://www.youtube.com/watch?v=VEXb4yEEiWA&feature=youtu.be
 
 https://www.youtube.com/watch?v=3qsAHT1UeTI&feature=youtu.be
 
 https://www.youtube.com/watch?v=_uwjEch1mcU&feature=youtu.be
 
 https://www.youtube.com/watch?v=4EbNr3czXdQ&feature=youtu.be
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:34:08 AM
silly boy, you prove you are the only one rampaging here
Fritz

Stefan please ban WhatIsIt/Felix and v8karlo/elmo for breaking forum rules

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:36:07 AM
you rampage yourself and no one wants to hear you, others want to hear Chris, his work is validayed, you have nothing
it works Tinman told you
can you not understand
do you not listen
can you make any more pointless noise with no evidence
I am telling you that Chris is right and it works
you post fail experiment but forget success, are you one eyed
one eyed and and rampaging here wasting forum and breaking rules
Fritz


https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:40:58 AM
we owe you nothing
we listened
we worked
we made it work
we succeeded
you complain and do nothing
you do not learn
you do not listen
you break forum rule
no one here wants to hear you
others asked you to go do something constructive
you rampage here
you rampage here
you rampage here
breaking forum rules
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 14, 2020, 03:59:54 PM
Chris/Frisky,

For those who follow all your yada, yada, yada, there should be one glaring proof that you have NOTHING!  That simple TRUTH is, if you really did have a valid OU device, you wouldn't be wasting your time on any forum yaking about how great you are, but rather you would be building product! 

Ignoring for the moment the needs of those in the third world countries who could use energy to survive, do you realize the size of the markets that "stealth" products could fill?  These would be products that would not be marketed as FE or OU but rather support for existing energy sources.  For example, a simple battery charger that maintains the level of an LAB at a precise 13.8v float so that all the motorized vehicles that are used infrequently would start after months or years of inactivity. 

Or how about just replace the LAB with super caps with the same charger as this type of starter battery should last a lifetime?

Or how about solar panel enhancement of 2-300%?

Or how about home security systems, etc, etc, etc?

These types of products would produce much more revenue than your forum!!!

Now I know how you are going to respond as you are quite predictable.  You're going to say, "Of course, my team and I have been developing many of these products and if you join my forum blah, blah, blah, blah!"

Here is where I challenge you or any of your followers to "put up"- Take a glass top table and place one of your self-running devices with a lamp load on top with no batteries or outside connections and produce a video demonstrating the run time capability.

Patiently waiting,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 04:05:29 PM
good wait as long as you like
you have only one option
we do not play dumb games
either put the work in and learn
or wait for eternity
you choose
we never loose
we grow bigger in number everyday
you grow smaller
we are light years ahead of you
yada, yada, yada, blah, blah, blah, blah!
in this time we are further ahead
the world watches
the world sees
others are not dumb
others see what you are doing
more of us come forward
more of us show you up
you dont know truth
we have the truth
we are the truth
more of us come forward
more of us come forward
more of us come forward
Fritz

Chris/Frisky,

For those who follow all your yada, yada, yada, there should be one glaring proof that you have NOTHING!  That simple TRUTH is, if you really did have a valid OU device, you wouldn't be wasting your time on any forum yaking about how great you are, but rather you would be building product! 

Ignoring for the moment the needs of those in the third world countries who could use energy to survive, do you realize the size of the markets that "stealth" products could fill?  These would be products that would not be marketed as FE or OU but rather support for existing energy sources.  For example, a simple battery charger that maintains the level of an LAB at a precise 13.8v float so that all the motorized vehicles that are used infrequently would start after months or years of inactivity. 

Or how about just replace the LAB with super caps with the same charger as this type of starter battery should last a lifetime?

Or how about solar panel enhancement of 2-300%?

Or how about home security systems, etc, etc, etc?

These types of products would produce much more revenue than your forum!!!

Now I know how you are going to respond as you are quite predictable.  You're going to say, "Of course, my team and I have been developing many of these products and if you join my forum blah, blah, blah, blah!"

Here is where I challenge you or any of your followers to "put up"- Take a glass top table and place one of your self-running devices with a lamp load on top with no batteries or outside connections and produce a video demonstrating the run time capability.

Patiently waiting,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 04:06:29 PM
we owe you nothing
we listened
we worked
we made it work
we succeeded
you complain and do nothing
you do not learn
you do not listen
you break forum rule
no one here wants to hear you
others asked you to go do something constructive
you rampage here
you rampage here
you rampage here
breaking forum rules
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 04:41:30 PM
the run time capability
how about only on component failure
you have so much to learn
learn
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 04:50:24 PM
this is one
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 04:54:47 PM
you rampage yourself and no one wants to hear you, others want to hear Chris, his work is validayed, you have nothing
it works Tinman told you
can you not understand
do you not listen
can you make any more pointless noise with no evidence
I am telling you that Chris is right and it works
more of us come forward
more of us come forward
more of us come forward
you post fail experiment but forget success, are you one eyed
one eyed and rampaging here wasting forum and breaking rules
Fritz


https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 14, 2020, 05:26:39 PM
Chris/Frisky,

Everything you have said, shown in circuitry and clip art is all conservative!  No gain mechanism to be seen at all!  That is why you nor anyone from your minions can demonstrate a working device as I've requested.

All the hoopla, clip art, and claims are BS!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 14, 2020, 06:06:36 PM
Chris/Frisky,

Want to see a REAL OU device, then read the paper below.  Since you are all so advanced, tell me the gain mechanism utilizing the "bucking" coils and tell me why this device can not be commercially built with today's technology?  Oh and while you are at it, check out the power density!

Still waiting for that demo!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 14, 2020, 06:40:34 PM
Partnered Output Coils -Free Energy
#7564 ,January 01,2017
"negative input power"
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 09:49:06 PM
everyone knows who is bs
you follow Chris around everywhere
its so obvious
like a puppy
you copy his work
you copy his work
you copy his work
give no credit
he out smarts you every time
Chris wins
Chris is truth
we support him because he tells the truth
he shows the truth
you nothing
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 14, 2020, 10:03:18 PM
Since my reply was deleted almost immediately on the censored thread, I'll post it here. A response to this:
bistander, argued about rms
Chris proves you wrong, shows evidence

http://www.aboveunity.com/thread/measurements/?order=all#comment-3a37b2ee-6f06-45c4-a5ea-ac36000a023c

you people loose credibility faster every day
why dont you know this simple stuff
try and learn
Chris keeps showing how wrong you are
how little you know
Warum kennst du dieses einfache Zeug nicht?
Fritz

My reply:
I don't recall being wrong. Please provide a quote from me along with link. Thanks.
bi
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 10:14:50 PM
that's very clever bystander
do you realise this makes you look bad
you have used rms all your life and now deny it
you people loose credibility faster every day
why dont you know this simple stuff
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 14, 2020, 10:42:30 PM
that's very clever bystander
do you realise this makes you look bad
you have used rms all your life and now deny it
you people loose credibility faster every day
why dont you know this simple stuff
Fritz

You make this up. Back up your accusation or it didn't happen.
bi
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 10:54:26 PM
like a worm in a fry pan
that's very clever bystander
do you realise this makes you look bad
you have used rms all your life and now deny it
you people loose credibility faster every day
why dont you know this simple stuff
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 10:59:04 PM
are you starting to see why we are so far ahead of you
people here have been lied to
people here have been mislead
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 14, 2020, 11:26:16 PM
are you starting to see why we are so far ahead of you
people here have been lied to
people here have been mislead
Fritz

People understand from where the lies and misleadings come. And it is not me.

BTW, from the above unity forum:

Note the quote at bottom of screenshot.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 14, 2020, 11:30:44 PM
everyone knows who is bs
you follow Chris around everywhere
its so obvious
like a puppy
you copy his work
you copy his work
you copy his work
give no credit
he out smarts you every time
Chris wins
Chris is truth
we support him because he tells the truth
he shows the truth
you nothing
Fritz

Well now, that's a real scientific and professional response!  Is this all you can do is hurl accusations and lies and display clip art?  That really gets a little old you know and it demonstrates how juvenile you are! 

Come on- own up and show us a demo of a self-runner, I'm still waiting.

Pm 
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 14, 2020, 11:37:35 PM
we look at you people here and all of think very poorly of you
we have given you the experiments to start
you do not
you do not progress
you speak with no truth no fact
we have self running machines, lots of us do
you think you are so important you deserve to see
no
you are not important
Chris bans people like you all the time
we dont want people like you with us
thats why we do not show you
we dont want you
we want genuine people
truthful people
people that can learn
people that can progress
people that do not take others work and claim as their own
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 12:25:15 AM
bystander with every post you make
more silly you look
maybe stop and learn before letting your silly get in the way
learn, what rms is for and what time to use it and what time not to
Chris runs rings around you every breath
you will not ever understand the scope here
none of you do
only people with active brain can
evidence is truth
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 15, 2020, 01:07:59 AM
this is one
Fritz


Hi FriskyFritz and EMJunkie,

You guys refer to Tinman's rotary transformer setup and you completely disregard it includes a permanent magnet
embedded in the stator core.  Your partnered output coils setup does not include a permanent magnet.
This fact (together with Tinman's own switching circuit for his setup) is a game changer: you have
been comparing apples to oranges for years.
Tinman's setup has nothing to do with your setup and no amount of reference to his work justifies your claims.

Tinman did mention the bucking coils but to get over or aboveunity, the use of bucking coils in itself is simply not enough:
you would need to know the switching sequence in the rotary transformer setup which includes the permanent magnet too.
Your setup simply does not have these ingredients. Here I give the benefit of doubt for Tinmans setup, considering the help in
the measurements he received back then from other forum members.

Gyula

PS  I posted this same text in the EMJunk thread a few minutes ago but the watchdog over there deleted it.
So I repeat the same here.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:13:51 AM
read this post
look at what this person is saying
we refer to evidence
a self running device does not have the ingredients
I laugh so hard at this silly
serious trollage
proof of magnet
you have no proof of a magnet
you speculate
speculation from a lie told
math shows your lie
free run on switch off shows your lie
no modifications: https://youtu.be/qCcJDyzYkL8 shows your lie
lies lies lies
more lies
more lies
more lies
facts are truth
evidence is truth
these people know nothing of truth
make judgement on their actions and the evidence
shun the liars
see them for what they are
bottom dwellers of humanity
exposed
Fritz

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:19:16 AM
Chris deletes lies and rubbish
moderation
feel the pain
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 01:26:51 AM
Niedlich,Fritzchen !
Hattu schon mal watt mit Toten zu tun gehabt ? Tote,zu denen gehoert auch der Totenschaedel,sind kalt !
Und,ich gebe es zu  - ohne Pein - war es ein richtiges Vergnuegen die Leiche im Fahrstuhl des Krankenhauses Dachau zu bewegen : die mitfahrende und begleitende Schwesternschuelerin machte sich dabei fast aus Furcht ins Hoeschen !  8) ;D :)
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:30:19 AM
staune über den Bestrafer
Tote helfen uns aus dem Grab
Lügner aussetzen
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:39:04 AM
you are not smart
it is not smart to lie
lies are caught
lies discredit you
lies are visible to everyone
every reader
shun liars
judge them on their actions
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 01:45:29 AM
staune über den Bestrafer
Tote helfen uns aus dem Grab
Lügner aussetzen
Fritz
Pardon,sind Sie vielleicht im Video  'Thriller'mal nebst M.Jackson als Komparse aufgetreten oder ist die Uebersetzung in die deutsche Sprache wirklich so grottenhaft ' schaurig' wie Ihre sonstige Alltagsdenkweise ?!





Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:46:11 AM
Gyula is wishing he did not post rubbish now
why so much silly
easily provable
they stick with the lies
they tell more lies
they mislead you with their lies knowingly
no modifications: https://youtu.be/qCcJDyzYkL8
make judgement on their actions
shun the liars
evidence is truth
Fritz



Hi FriskyFritz and EMJunkie,

You guys refer to Tinman's rotary transformer setup and you completely disregard it includes a permanent magnet
embedded in the stator core.  Your partnered output coils setup does not include a permanent magnet.
This fact (together with Tinman's own switching circuit for his setup) is a game changer: you have
been comparing apples to oranges for years.
Tinman's setup has nothing to do with your setup and no amount of reference to his work justifies your claims.

Tinman did mention the bucking coils but to get over or aboveunity, the use of bucking coils in itself is simply not enough:
you would need to know the switching sequence in the rotary transformer setup which includes the permanent magnet too.
Your setup simply does not have these ingredients. Here I give the benefit of doubt for Tinmans setup, considering the help in
the measurements he received back then from other forum members.

Gyula

PS  I posted this same text in the EMJunk thread a few minutes ago but the watchdog over there deleted it.
So I repeat the same here.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 01:59:45 AM
sich wie ein Clown zu benehmen ist nicht sinnvoll
Fritz

Pardon,sind Sie vielleicht im Video  'Thriller'mal nebst M.Jackson als Komparse aufgetreten oder ist die Uebersetzung in die deutsche Sprache wirklich so grottenhaft ' schaurig' wie Ihre sonstige Alltagsdenkweise ?!
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 02:04:10 AM
Es gibt den guten/lieben und den traurigen/boesen ,bei Clownerien sollte man flexibel sein und bleiben  !
Eine gute Nacht
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 02:20:05 AM
one eyed
listen to those that know
Tinman told you
I am telling you
Chris has told you for years
other members of Chris's forum have told you
judge them on their actions
listen to truth
evaluate the evidence
let liars sink to the bottom and disperse as mud
Fritz


https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 02:35:48 AM
Before dodot machen :
ever the same references : from 2015/2016
We have now 2020,let Tinman/tinman and Grumage ,if they are interested giving their comment about the technology from actual view,with newest discoveries from measurement errors or/and  technical- physical improvements !
What does us help the "yesterday" ? Nothing ! Forget  the past !

Good night anywhere
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 02:48:18 AM
2020 so we now forget Einstein
2020 we now forget Pythagoras
silly
Fritz

Before dodot machen :
ever the same references : from 2015/2016
We have now 2020,let Tinman/tinman and Grumage ,if they are interested giving their comment about the technology from actual view,with newest discoveries from measurement errors or/and  technical- physical improvements !
What does us help the "yesterday" ? Nothing ! Forget  the past !

Good night anywhere
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 03:00:06 AM
Pithagoras,Seelenwanderer, um 500 ante Christe,idem Seelenwanderer
aV2+bv2=cv2 ist nicht von Pithagoras(aber mit ueberliefert)
Tonscherben im alten Babel sind mit dieser Formel vorgefunden worden,aelter als dessen Geburtsjahr
Dr.phy.Albert Einstein ist fuer einiges bekannt,aber nicht Universalwissen darstellend !

Opportun ist es ueber diese Personen und Leben/-s-Werk zu wissen,aber nicht als Gebetsmuehlenpreisung !

Tinman,Grumage,Fritzchen,EMJunk : nuetzliche Werker darstellend,so hoffe man !

Nu aba,guat Naechtle !

p.s.                      :                  E=hv   Wann definiert ?

        wer definierte diese Formel ? (Nur eine "Unbekannte= v ?,da h= konstante !)

       Wer erhielt den "  photoelektrischen Effekt " - Nobelpreis ? Wann ?

       
  Planck + Minkowski (Doktor-Vater): Einsteins'  'Geistes'-Welt

Wir studieren Profile,FriskyFritz,Gewesene und Existente,wie Sie ! Offene Buecher !Avec 'Charly' ! Vous,aussi ?
Zu sein einer der noch wenigen Menschen mit ' pluralis majestatis'- Betrachtung dieser Welt !

Edel behandeln,dabei edel zugrunde gerichtet zu werden ! fatum:Schicksal:k'isme't
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 06:04:59 AM

Fritz junkie

You sound like you are on drugs, heavily.

Chasing a ghost for 15 years has its price.

You lost your sanity, and there is no time return.
Only forward into more madness.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 06:28:26 AM

Fritz junk,

Winter in Queensland is over soon.

Relax, go to the beach,

or chase some kangoroo.

Leave the drugs under the table.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 07:31:58 AM
silly boy, we will eat sausages and drink beer watching Stefan ban you for more forum rule breaking
you and your partner are noisy pointless posters that no one wants to see or hear go away
Fritz

Stefan please ban WhatIsIt/Felix and v8karlo/elmo for breaking forum rules

Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 07:33:19 AM
judge them on their actions
listen to truth
evaluate the evidence
let liars sink to the bottom and disperse as mud
Fritz


https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 07:51:57 AM

And everyone should listen only your truth.

Right?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 08:04:01 AM

Like CaptainOz, he started to doubt in you!

What you will do to person who does not agree with you?

Enemy, troll, traitor?

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 08:16:11 AM
WhatIsIt you are upset no one here likes you
I have friends
we have a very dedicated team
most of us are successful
no one here likes you and Stefan is going to ban you for breaking forum rules
hang on tight and make as much noise as you can on the way out
Fritz



Whatisit

No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards


Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad



feel the pain
listen for the pointless noise on the way out
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 08:26:20 AM

Junkie,

You can not blame people because you dont know how to

implement bucking coils to work?

You just dont know how to do it!
A simple fact, and true. After 15 years still nothing.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 08:31:06 AM

Junkie,

Dont worry, you will make it one day, and everyone will see how right you were.

One day in future.

You can do it, I believe in you!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 09:11:20 AM

It seems that one of the cult followers, CaptainLoz is loosing faith,

and should be punished.

Non believers and trolls are like plaque.
Quick action is needed!

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:33:50 AM
WhatIsIt you are upset no one here likes you
I have friends
we have a very dedicated team
most of us are successful
no one here likes you and Stefan is going to ban you for breaking forum rules
hang on tight and make as much noise as you can on the way out
like any responsible leader, Chris shows concern for his members, you like to make lies over concern, go ahead, but lies it is and we all see your lies
more fake news from the fake news media
more forum rule breaking
Fritz



Whatisit

No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards


Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad



feel the pain
listen for the pointless noise on the way out
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:42:08 AM
get ready for gitmo
Q says justice is coming
you clowns and liars are all going to be fed to the sharks at gitmo
the noisy fisherman can watch you all get eaten
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:43:01 AM
you have to be terrified
you have to be
scared
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 09:43:18 AM
Emjunkie,

I can feel your pain.
You must restore the faith in only god, bucking coils.

CaptainLoz doubt can not be tolerated.
It is dangerous to cult.

You should deal with danger with your usual methods,
before it spreads! Quickly!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:46:03 AM
WhatIsIt you are upset no one here likes you
I have friends
we have a very dedicated team
most of us are successful
no one here likes you and Stefan is going to ban you for breaking forum rules
hang on tight and make as much noise as you can on the way out
like any responsible leader, Chris shows concern for his members, you like to make lies over concern, go ahead, but lies it is and we all see your lies
more fake news from the fake news media
more forum rule breaking
Fritz



Whatisit

No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards


Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad



feel the pain
listen for the pointless noise on the way out
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:47:34 AM
get ready for gitmo
Q says justice is coming
you clowns and liars are all going to be fed to the sharks at gitmo
the noisy fisherman can watch you all get eaten
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 09:57:49 AM
picture is a big one
I cant fix
another rant
a message to bad people
bad people must be terrified
liars cheats and all round bad guys get ready for pain
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:01:23 AM
ask the question
what is it
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 10:12:14 AM
Stefan has different goals ...here FriskyChris plays games while people starve to death.. still !!!... on Planet earth 2020 ...not just a few ...9 million and rising due to covid now every year ...here FriskyChris points fingers at ?? all the persons who ask questions and ask for help
here FriskyChris warns "himself" not to share or he will Ban himself from his forum...["shot across the bow to his members who might have a conscience for the consequences of their silence [people actually dying]

here friskyChris calls such "a self righteous cause"
does not even enter into his discussion [consequences of with holding such tech from the world]Not the dieing coral reefs around your country ...the sea being destroyed this last decade [how long you hide tech for apparently no good reasoning except "ownership/EGO " ??Ego ?
and here you want to have parties with drinking and food images...to celebrate all you have let perish in animal kingdom and humanity...oceans and atmosphere...??Party time ??

PLEASE SHARE YOUR TECH !! HUNDREDS PERHAPS THOUSANDS HAVE TRIED AND FAILED

STOP THIS SICK TWISTED GAME !!Not once has there been help offered to all the failed attempts..just name calling and childish games Not one single cop 1.7 EMjunkie claim successfully replicated here...
And now the man you try to ban tells us you demand money for info and we see you don't help members of your own forum replicate...you allow them to struggle and fail and just watch ?? FOR YEARS ??
this sick game is a crime against humanity and our planet ...
how many more will you allow to die...while you party and giggle like children at the strugglingcalling them stupid ??

There is a real problem when persons with world saving tech Hide it from the world...for ten years ..sick perversion of responsibility and reality...Sadists come to mind..

EDIT
and here you play games...

I see experimenters / volunteers called paid ?


Writing lies or trying to start fires around others to avoid
Your own responsibility?
Again the games children play!!


I think you have been trying to get banned here for months
Posting same vulgar lies ( and removing) that got you banned
Before
About Graham G too!!


Banning fits your business model (martyr)


Hundreds have failed to replicate
Not one person was helped
Not one shown the error


And here you pretend you would help me?
A devout open source person ?


You got everything you asked for here from Stefan (whom you have also personally attacked
In the past even hacking his forum ( and now again a hacker here attacking me and forum)
Ask member Floor


Stop playing games child
People die during your game (yes I see you care not below)


Not your problem
Everything fine for the “privileged”









Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:21:39 AM
ramset maybe you can fund a team to save all the starving people of the world or may be vaccinate them
which one is your goal
your high horse FriskyRamset is not ever what you claim
cop 1.7 is easy, its achievable for even you but you choose not to try and your paid team is too
achieve don't complain
Stefan's goal is as mine is to educate others on whats possible
it is in his statement
you have no path forward, you demand others, we say no, you cry
I cry for you, I hope he has mercy on you
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:23:54 AM
Chris gave you the path forward
you refuse to participate
you refuse to get your vaccination team involved
you complain
you do not ever achieve
you loose
Fritz



My Friends,

I started Partnered Output Coils - Free Energy (https://overunity.com/15395/partnered-output-coils-free-energy/) back in January 2015. It was a success and Partnered Output Coils is now part of every serious Experiment today!

While some struggle, others report great success.

The biggest problem we had was, we could have done the release and Introduction with several hundred less pages on Stefan's Forum! Far too many trouble makers! Yes I could have handled myself a little better, but when one gets Attacked all the time, one tends to get a little defensive.

We Introduce: Partnered Output Coils - Builders Group

Chet ( Ramset ) and I are the moderators. There will be opposition, there will be some that don't like being moderated, we will be fair, we will only moderate what we need to! We aim to keep the Trouble makers out and the Motivation High!

No one is twisting your Arm, you join in and participate if you want to! This is your Choice! If your not participating, then please refrain from posting. We want those that have experience posting and all here to help each other.

   1: Off Topic Posts will be deleted!
   2: Posts containing Harassment will be deleted!
   3: Slanderous Posts will be deleted!


I urge all interested parties, Gear Up, we are gonna break new ground! I will do the best I can to help others here! My Team must always come first however, but I am serious, I want every human being on the planet to have the opportunity to learn something amazing and simple!

   1: Input Coil - 10% Duty Cycle starting at about 3 Volts into 25 turns 1.2mm Wire.
   2: Secondary Coil - 70 - 200 Turns 0.8mm wire - Opposes the Primary, use the Right Hand Grip Rule.
   3: Tertiary Coil - 70 - 200 Turns 0.8mm wire - Opposes the Secondary Coil, Assists the Primary Coil, use the Right Hand Grip Rule.


Make sure you have nice clean switching on your Input Coil. You need a Voltage Source that you can turn up, this is important to see the effects.

I have coined a term: Delayed Conduction (http://www.aboveunity.com/thread/delayed-conduction-in-bucking-coils/), I have many hundreds of very detailed articles on my Forum: http://www.aboveunity.com, please use the pages there for reference! Please use: Builders Guide to Aboveunity Machines (http://www.aboveunity.com/thread/builders-guide-to-aboveunity-machines/) for extra help!

Remember: Greater than 90% of the time, your Input is Off, this means your Output should be Off, there is no way for your Output to be On is there - Well yes, this is where Science has no proper explanation for whats occurring! One of many gaping holes in Electromagnetics! Let me tell you something very important:

   1: The Change in Magnetic Field Creates a Voltage!
   2: The Opposition of Magnetic Fields Pumps Current!
   3: The term Magnetic Fields is Interchangeable with Current, as a Current is the same thing / Creates a Magnetic Field!


Your Coils must be Loaded at all times, or this will not work! It is advantageous to think: Action, Reaction and Counter-Reaction!

We have a Historical Record to support Asymmetrical Regauging, as long as one can get the Potential, Voltage sufficiently high enough: I = V / R, then your machines will produce: Above Unity Results!

Don Smith:

https://www.youtube.com/watch?v=4qqQarHd74s



The MEG Team:

https://www.youtube.com/watch?v=no50_5iSr2Y



Tinman:


What-you mean like the below scope shot's?
First scope shot before the diode.
Second scope shot after the diode,and large cap removed.

EDIT: Below, see Before and after Diode.



Graham Gunderson:

https://www.youtube.com/watch?v=aQVhMu2FzSg



I have done a video series, to try to explain Partnered Output Coils, the effects, what to look for, how to solve problems and how to make the Coils Act and React together in an advantageous way!

   1: https://www.youtube.com/watch?v=VUemDvugl4I
   2: https://www.youtube.com/watch?v=8LtTerstCxU
   3: https://www.youtube.com/watch?v=SWlLiiIyUOw
   4: https://www.youtube.com/watch?v=k5RoEnmDrR4
   5: https://www.youtube.com/watch?v=sTr6dxD61uw
   6: https://www.youtube.com/watch?v=fFIgo7pj9bY
   7: https://www.youtube.com/watch?v=pKFo4dOW4UU
   8: https://www.youtube.com/watch?v=tUaLp0E2L3s
   9: https://www.youtube.com/watch?v=Gs_e_aU5loc
   10: https://www.youtube.com/watch?v=DdwNiaEuUrg
   11: https://www.youtube.com/watch?v=CRduG2PNIgk



The Sawtooth Wave Form (http://www.aboveunity.com/thread/the-sawtooth-waveform/) is the defining Energy "Generation" Waveform! Please, always keep this in mind! Think in terms of Energy "Generation"!

You need to think in terms of Symmetry vs Asymmetry! A Symmetrical System can Never Go Above Unity! Your System needs to be Asymmetrical, this is a requirement to be able to "Generate" excess energy beyond the Unity Boundary! Its worth Bench-Marking your machine in Transformer mode, making sure you have around 80% Efficiency at least. Then anything above the 80% mark you can verify, has entered the System beyond the Benchmark value!

As I have shown for many years, Partnered Output Coils must oppose, must Buck each other, there is a specific Polarity to this and the polarity needs to be right. Then you need to focus on the "Generation" Phase, and maximise that phase, remember: I = V / R, Ohms Law. Keep in the back of your head, nearly all the Energy "Generation" Phase is done when your Input is OFF! Thus the short Duty Cycle.

NOTE: Your Machine Pumps Current for almost 100% of the Cycle, but your Input is only on around 10%, or less, so > 90% of the Cycle, you have Energy Output, Energy Output when your Input is OFF, this is significant!

If you only take one thing from what I have posted, please take the following sentence:

Its all just an Understanding, think Asymmetry, forget Symmetry. The Magic happens when you break Symmetry! Action, Reaction and Counter-Reaction!

I hope we get a good response from everyone! Good intentions bring forth Good Intentions, but also brings not so good Intentions, thus why we will Moderate. Please think twice before posting.

Please Remember: This is a Builders Group, if you are not building, then if you can make sure you only post useful, serious discussion, you think that would be helpful for others!

I would like to personally Invite Tinman to join us, that is if he wishes.

Best wishes, stay safe and well,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 10:27:59 AM

Emjunk,

Did you ever considered that bucking coils works only

in your town OXENFORD, Australia?

Maybe it is Geo related and does not work anywhere else in world?
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:33:33 AM
it appears you are threatening other members
publishing private information on members is a broken rule
breaking forum rules again
Stefan ban whatisit for breaking forum rule
I have notified Chris and he might take this to his lawyers for further action
notify the police
depending on what Chris decides you might be in real trouble here
you might be off to gitmo sooner
Fritz
 

Emjunk,

Did you ever considered that bucking coils works only

in your town OXENFORD, Australia?

Maybe it is Geo related and does not work anywhere else in world?
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:43:02 AM

Whatisit

No offense, but even though I am critical of EMJ like many others you seem to have jumped headfirst off the deep end into a pool with no water. Do you not have more constructive ways to spend your time because this is kind of absurd.

Regards


Quote
Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0

I have done this many times over the years,and yet no one wanted to really know about it,nor was much interest shown.
The L.A.G
The rotary transformer-->along with a few others.
Using the bucking coil configuration, coupled in with PM's on a stator that attract an electromagnetic field of a rotor,but appose the generated field of a generating coil,it would seem that the overall output has exceeded that of the input-->and i am pretty up to date on measuring P/in and P/out with DC system's ;) The latest setup seems to show a COP>+ without even having to try and measure the mechanical output to the fan. That output would be just an additive to the output. By removing the fan,the P/in go's down,and the P/out to the resistive load go's up.

But here your damed if ya do,and damed if ya dont.
So i post a video here showing what i have,and it show's a COP>+ --> then what? ::)
Yes-all the crap starts (as it has so many times before).
People want all the details,so as they can start there build of there own COP>+ device.
They take short cut's,and dont follow instructions,and when there device dosnt work,they call you a fake-->or the device works as stated,and now some rich prick patents the device,and were all screw'd,and im left with nothing more than i have today despite all my hard work over the years.

So rather than post all the details here MH,and have others profit from my hard work(as we seen in the case of SEC exciter being pilfered by teslatronix) How about i just post a video of the device running,and show how i am calculating my P/in and P/out-->would that be acceptable?.
From there you can pick it apart as much as you like.

It would seem that a bucking coil arrangement dose indeed add energy to a system. My test over the years have shown this to be true,but all my devices that use this arrangement are mechanical--E.G-,motors,generators.


Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.


Quote
https://www.overunityresearch.com/index.php?topic=3319.msg56743#msg56743
Quote
Quote from: Grumage on 2016-08-08, 11:27:56
Ah..... It seems Brad beat me to it!

Should I open a topic? " Do permanent magnets DO work "

Consensus?

Cheers Grum.


I think it is time Grum,to answer this question once and for all.

For every action,there is an equal and opposite reaction--and then there is the counter reaction 

Open the topic,and lets get ION on the scene ,as he knows his way around calorimetry setup's,and i believe this is the way to show PMs doing useful work.


Brad

Quote from: tinman
https://www.overunityresearch.com/index.php?topic=3319.msg57155#msg57155
PM

How closely do you think this is starting to resemble EMJs partnered output coil setup?,as i am seeing some resemblance here.


Brad



feel the pain
listen for the pointless noise on the way out
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 11:03:07 AM
Your bucking coils could be Geo related,
and maybe works only in your region.

You posted your info on google and is evident that you are far away
from US, Russia or Europe.

https://website.informer.com/Chris+Sykes+E-Gadget.html

So, it can be Geo related!
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 11:04:42 AM
Frisky child with life saving secrets
Playing games and writing lies while planet suffers for ten years


You Chris have pictures of Tinmans house here
And published his name for years and years (as taunt and threat to his safety and family)


Please forward the name of lawyer
Writing lies about me being paid?
Or anyone who fails a replication here being paid?


Please forward lawyers name


However
I have been recently told that effect is geospecific
Only one place in New Zealand saw effect (many years ago)


Why not be honest?
Why all this deception all these years ?


There is much to talk about!!


And it is not this nonsense!!





Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 11:09:23 AM
FriskyRam there is no secrets
your claims are false
Chris gave you the path forward
you refuse to participate
its all right there
Chris has given you 100% right information
Chris has given you 100% right information
Chris has given you 100% right information
nothing is hidden
nothing is hidden
nothing is hidden
verbinde die Punkte
milk the cow
breakfast
Fritz



My Friends,

I started Partnered Output Coils - Free Energy (https://overunity.com/15395/partnered-output-coils-free-energy/) back in January 2015. It was a success and Partnered Output Coils is now part of every serious Experiment today!

While some struggle, others report great success.

The biggest problem we had was, we could have done the release and Introduction with several hundred less pages on Stefan's Forum! Far too many trouble makers! Yes I could have handled myself a little better, but when one gets Attacked all the time, one tends to get a little defensive.

We Introduce: Partnered Output Coils - Builders Group

Chet ( Ramset ) and I are the moderators. There will be opposition, there will be some that don't like being moderated, we will be fair, we will only moderate what we need to! We aim to keep the Trouble makers out and the Motivation High!

No one is twisting your Arm, you join in and participate if you want to! This is your Choice! If your not participating, then please refrain from posting. We want those that have experience posting and all here to help each other.

   1: Off Topic Posts will be deleted!
   2: Posts containing Harassment will be deleted!
   3: Slanderous Posts will be deleted!


I urge all interested parties, Gear Up, we are gonna break new ground! I will do the best I can to help others here! My Team must always come first however, but I am serious, I want every human being on the planet to have the opportunity to learn something amazing and simple!

   1: Input Coil - 10% Duty Cycle starting at about 3 Volts into 25 turns 1.2mm Wire.
   2: Secondary Coil - 70 - 200 Turns 0.8mm wire - Opposes the Primary, use the Right Hand Grip Rule.
   3: Tertiary Coil - 70 - 200 Turns 0.8mm wire - Opposes the Secondary Coil, Assists the Primary Coil, use the Right Hand Grip Rule.


Make sure you have nice clean switching on your Input Coil. You need a Voltage Source that you can turn up, this is important to see the effects.

I have coined a term: Delayed Conduction (http://www.aboveunity.com/thread/delayed-conduction-in-bucking-coils/), I have many hundreds of very detailed articles on my Forum: http://www.aboveunity.com, please use the pages there for reference! Please use: Builders Guide to Aboveunity Machines (http://www.aboveunity.com/thread/builders-guide-to-aboveunity-machines/) for extra help!

Remember: Greater than 90% of the time, your Input is Off, this means your Output should be Off, there is no way for your Output to be On is there - Well yes, this is where Science has no proper explanation for whats occurring! One of many gaping holes in Electromagnetics! Let me tell you something very important:

   1: The Change in Magnetic Field Creates a Voltage!
   2: The Opposition of Magnetic Fields Pumps Current!
   3: The term Magnetic Fields is Interchangeable with Current, as a Current is the same thing / Creates a Magnetic Field!


Your Coils must be Loaded at all times, or this will not work! It is advantageous to think: Action, Reaction and Counter-Reaction!

We have a Historical Record to support Asymmetrical Regauging, as long as one can get the Potential, Voltage sufficiently high enough: I = V / R, then your machines will produce: Above Unity Results!

Don Smith:

https://www.youtube.com/watch?v=4qqQarHd74s



The MEG Team:

https://www.youtube.com/watch?v=no50_5iSr2Y



Tinman:


What-you mean like the below scope shot's?
First scope shot before the diode.
Second scope shot after the diode,and large cap removed.

EDIT: Below, see Before and after Diode.



Graham Gunderson:

https://www.youtube.com/watch?v=aQVhMu2FzSg



I have done a video series, to try to explain Partnered Output Coils, the effects, what to look for, how to solve problems and how to make the Coils Act and React together in an advantageous way!

   1: https://www.youtube.com/watch?v=VUemDvugl4I
   2: https://www.youtube.com/watch?v=8LtTerstCxU
   3: https://www.youtube.com/watch?v=SWlLiiIyUOw
   4: https://www.youtube.com/watch?v=k5RoEnmDrR4
   5: https://www.youtube.com/watch?v=sTr6dxD61uw
   6: https://www.youtube.com/watch?v=fFIgo7pj9bY
   7: https://www.youtube.com/watch?v=pKFo4dOW4UU
   8: https://www.youtube.com/watch?v=tUaLp0E2L3s
   9: https://www.youtube.com/watch?v=Gs_e_aU5loc
   10: https://www.youtube.com/watch?v=DdwNiaEuUrg
   11: https://www.youtube.com/watch?v=CRduG2PNIgk



The Sawtooth Wave Form (http://www.aboveunity.com/thread/the-sawtooth-waveform/) is the defining Energy "Generation" Waveform! Please, always keep this in mind! Think in terms of Energy "Generation"!

You need to think in terms of Symmetry vs Asymmetry! A Symmetrical System can Never Go Above Unity! Your System needs to be Asymmetrical, this is a requirement to be able to "Generate" excess energy beyond the Unity Boundary! Its worth Bench-Marking your machine in Transformer mode, making sure you have around 80% Efficiency at least. Then anything above the 80% mark you can verify, has entered the System beyond the Benchmark value!

As I have shown for many years, Partnered Output Coils must oppose, must Buck each other, there is a specific Polarity to this and the polarity needs to be right. Then you need to focus on the "Generation" Phase, and maximise that phase, remember: I = V / R, Ohms Law. Keep in the back of your head, nearly all the Energy "Generation" Phase is done when your Input is OFF! Thus the short Duty Cycle.

NOTE: Your Machine Pumps Current for almost 100% of the Cycle, but your Input is only on around 10%, or less, so > 90% of the Cycle, you have Energy Output, Energy Output when your Input is OFF, this is significant!

If you only take one thing from what I have posted, please take the following sentence:

Its all just an Understanding, think Asymmetry, forget Symmetry. The Magic happens when you break Symmetry! Action, Reaction and Counter-Reaction!

I hope we get a good response from everyone! Good intentions bring forth Good Intentions, but also brings not so good Intentions, thus why we will Moderate. Please think twice before posting.

Please Remember: This is a Builders Group, if you are not building, then if you can make sure you only post useful, serious discussion, you think that would be helpful for others!

I would like to personally Invite Tinman to join us, that is if he wishes.

Best wishes, stay safe and well,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 11:19:14 AM

You are in Australia.
Info is in public domain.
https://website.informer.com/Chris+Sykes+E-Gadget.html

And that could explain why bucking coils works only there,
or maybe in some parts of the world.

They are unstable.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 11:23:40 AM
Thousands have failed Chris
You watch your own members struggle
For years and years
Now you pretend you would help me?


Thanks for the laugh
You hold the power of life and death


You are truly a sadist tormenting and playing games
While people die for lack of this tech




And you try to get banned here
Even after you received all you asked for


No place left to squirm


Please share this tech ...or just one anamoly?
And pleasebstop calling persons who try and fail
“Paid”


Help us succeed
Stop delighting in our failure (as you continue to watch many failures
These last 5 years on your own forum)


Sadistic behavior with grave consequences (to our planet and lives)





Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 11:40:33 AM
FriskyRam what you write is diabolical slop
Chris told you

Quote
Action Reaction and Counter-Reaction

Tinman agreed
I agree
other AboveUnity.com members tell you also

people struggle
nothing we do can change this fact

we all tell you
understanding + hard work = success

magnetic fields oppose
right hand grip rule

follow the quote above

there is nothing we can do to help others learn and succeed other than give them the opportunity

we have given you the opportunity
we spend many hours getting the word out

for free

no cost to you or anyone

we can not do it for you
we can not do it for you
we can not do it for you

you must take the challenge on or not
you must take the challenge on or not
you must take the challenge on or not

you must decide if you want to succeed
you must decide if you want to succeed
you must decide if you want to succeed

the horse might throw you
might throw you again
and again

you must decide, do you want to learn to ride a horse
succeed, do not give up
it is true, no secrets, we have given you everything

we will help serious experimenters succeed

for free

we will not help time wasters

there are no secrets
there are no secrets
there are no secrets
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 11:42:14 AM

Emjunkie,

Now people can call you directly and you can help them with bucking coils.

It depends how many people you harassed over the years.

https://website.informer.com/Chris+Sykes+E-Gadget.html

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 11:52:41 AM
Whatsit
Please don’t do what Chris does here (he posts Tinmans
Personal info and pictures of his house)


It is not the proper path


Better to ask why he allows his own members to struggle for years and years
Why he lets species go extinct and 45 million starve to death these last 5 years
Why he lets his beautiful coral reef get destroyed for lack of solutions he and his members hide this last decade


Why so many struggle as he and few elites laugh?
Even his own forum is filled with many failures for 5 years
And still he watches and taunts them (love??)


Sickest love imaginable


Lives in death of millions!!

THERE SHOULD NOT BE ONE EMPTY
HAND
All should be busy with every tool available
And 100% upto speed


No more members at aboveunity begging and wasted years


One minute is to long to wait
Never mind a decade wasted already
Chris
Enuff
Please open source  !!


Your own members struggle with this 5 year copy paste
Nonsense
Teach or let a member teach ( I see you threaten yourself on your
Moderated thread with a code !
threatening your aboveunity members with banning


Those Who might get a conscience and try to open source!


Nice guy good to see the truth!










Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 12:06:09 PM
I agree.

He is doing that because he is sadist, and enjoys when people suffer and struggle.

He will think twice in future is it good to harass others,
and maybe his human side will prevail.

I will never do that to normal human being,
and I am witholding this info for some time now,
in hope that something will change,
but it did not.

It is bad what I did, and I am aware of that.

On the other hand, if he is not quilty of anything,
he should not worry.

I did not force Chris to behave like sadist over the years.
It was him, and him only.

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 12:10:20 PM
Ramsheep
here: https://youtu.be/txHtgwVm2-8
now go build it
can you
is there any other way
you keep writing diabolical slop
so much silly in you
you loose credibility when write so much diabolical slop
humanity must learn to help itself
if it cant help itself it cant survive
plant a seed
grow a garden
build knowledge
the welfare you demand is absolute failure of a race destined for greatness once welfare is destroyed and replaced with hope
you keep writing diabolical slop
you keep writing diabolical slop
you keep writing diabolical slop
how about change
Fritz

Whatsit
Please don’t do what Chris does here (he posts Tinmans
Personal info and pictures of his house)


It is not the proper path


Better to ask why he allows his own members to struggle for years and years
Why he lets species go extinct and 45 million starve to death these last 5 years
Why he lets his beautiful coral reef get destroyed for lack of solutions he and his members hide this last decade


Why so many struggle as he and few elites laugh?
Even his own forum is filled with many failures for 5 years
And still he watches and taunts them (love??)


Sickest love imaginable


Lives in death of millions!!
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 12:15:54 PM
Chris
You left out some parts



Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 12:22:37 PM
Ramsheep
my name is Fritz
if the child above was yours
what would you do to help the child
support the child and encourage to grow a garden
grow crops
learn how to sink a well
how to harvest water
how to build a house
how to clean up the yard
how to be clean
how to wash
how to learn
how tomorrow can be made better than today
you see, you are so silly
if the child can help itself
when youre gone, you do not need to worry
the child can look after itself
Ramsheep so much diabolical slop from you
learn about social science and evolution
a sloppy approach to serious matters is not acceptable
especially when you use the poor for your advantage
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 12:25:57 PM
Ramsheep
you are lost to satan, no joke
there is no reasoning with you, no joke
there is no helping you, no joke
you know nothing of logic, no joke
you are not capable of sensible dialog, no joke
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 12:33:54 PM
at Stefans forum this is his mission statement
not using poor to your advantage..it is why I am here ..you obviously have other reasons..and make jokes about this.
the death of others does not trouble you...

most important to you ??watching people suffer and struggle...and making jokes...
a heart of stone..
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 15, 2020, 01:20:08 PM
" .... you are not capable of sensible dialog .... "  ;) s-e-n-s-i-b-l-e  ::) which wonderfull or woundfull humo(u)r !
               Fischers' Fritze Fischt Frische Fische,wohl 'Menschenfischer' for the 'aboveunity'-net-community

        "logic" : you but know it,gelle !?

       Pithagoras and the pan-hellenic philosophy center : LOGOS

     Satan/Sheitan ist Teil der Ober-/Unter-Welt-Anschauung,wie Deus so dem Satan das taegliche XoXo ;)

Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 15, 2020, 02:01:22 PM
Trust me when I say this,


I know the pain and suffering people are going through as I grew up poor, but I also know how the world works. Europe is more to blame for our current situation than any other nation on this earth. They spread their system of government throughout the whole world. This master slave relationship started off as Lords and Surfs where the Lords put together an army to defend the Surfs from the Barbarians which despite what their history books try and paint about them where not a glorious people but a society of thieves. They they went on and created Kings and Queens and their system of false governance through fear and manipulation was put out on a global scale by the Roman Catholic Church. Capitalism, greed, fear mongering, hording, and just plain out being evil to people is their way of life as after all they follow Satan quit openly now days.


You see once the Romans took to the history of my people they rewrote it taking us out and putting themselves in our place. You see they never believed in the creator of all things YAH as he never spoke to them and perhaps never will given their wicked ways. Nope all they saw when they looked at Israel was this book had the power to control a entire nation and that was a power they very much wanted so that they could control their own populations. The leads of those times took to the book of the law and changed it removing the creator of all things from his very own book as well as his son, and most of his chosen people, oh, and they change his chosen people from being Negro to their likeness. One the leaders had a version of their newly created Bible they all agreed upon they set ship and spread their ways around the whole world armed with this Bible, guns, and swords, as basically they weaponized the history of my people.


Here's the part people seem to no longer know, Israel is not a place as Israel is a people for it was Israel that marched out of Mizriam (Egypt), it was Israel that wandered in the wilderness for all those years. But the leaders that wanted to control the hearts and minds of man with the book of the law made everything into their own image, changed the names of practically everyone, and set out rule the world. For a time it worked perfectly for them people just followed their lead without question and those that did question got dealt with harshly. This world they created is now running out of tricks to play on the governed as their economic systems are in turmoil and the governed are demanding to be treated fairly, with dignity, and respect. People believed in the propaganda they put out that one can pull themselves up by their own bootstraps all they had to do was work hard, but I'm no dummy. I see the hardest jobs in the world are in the farming fields and none of those people are pulling themselves up by their bootstraps. I worked in the fields myself when I was young and know just what it means to come home and that's all you can really do is eat, shower up, and go straight to bed. I even worked twelve hours a day seven days a week, did that allow me to pull myself up by my own bootstraps? Nope. So I sat back and did some thinking looking at the whole picture and it was then I saw those that worked the least were the ones living high on the hog. It's all a sham, just another one of the tools they use to control the masses.


But set the rules they have and if you don't follow those rules you will never make a company that produces anything as the rules of the market that hold people down are the cost per unit item fluctuations as those that have a lot of money can buy things at very low prices and those that are poor must pay an arm and a leg so how are they to compete in the open market? Just for an example so you all know just what I am talking about the transformer cores I use cost $358.00 bucks each but of you buy 250 of them you only pay $166.00 bucks for the cores a savings of more than 50%, so again how are the poor to compete with the rich as this goes with everything you do? Why do I bring this up? The reason is no one seems to understand the rules of the marketplace nor to they seem to understand that with a lot of these free energy devices even with a full set of plans most people in this world couldn't make sense of it or could afford to put it together as when you go to produce said items you will run into minimum buys, minimum makes, and the price hikes that the rich imposed upon the poor. A lot of you are so selfish as you don't think of anyone else outside of yourselves. How is Grandpa and Grandma supposed to build this technology? How about the youth how are they suppose to build this technology? What about the mentally challenged or objectively poor how are they supposed to build this technology? What about Mom and Dad doing what they can just to keep a roof over their heads for their children? None of you seem to even consider these things on your quest to gain energy independence for yourselves. As all I hear is me, me, me. You don't know how the world works nor do you care just as long as you get yours and I am sick to death of this attitude!


Unless you have some garage with all the bells and whistles in tooling and CNC mills you don't have what it takes to build this technology on your own. Going to a machine shop wanting that machinist to make just one of something most will not do as they have a minimum make as their machines eat up energy and they must recoup their cost. The minimum make for my Gas Processor was three and it cost over $1200.00 each and that's with no circuit, transformer, LEDs, and a really long list of other things to make it work. How many of you could afford that? But an even better question is how many of you would spend your hard earned money on a device you weren't even sure worked?


So, it is clear what type of a person we need to bring out technologies such as these they have to have Selfless Service running in their veins, you know, what is taught in the scriptures as doing more for others than you do for yourself. These are the types of people we need trying to bring out these technologies as these technologies all need to go into mass production as those are the rules the rich have already setup for the entire world. I didn't make these rules and I can't change them and nor can any of you so we must all play by them. Then there comes the safety aspect of these technologies who out there is going to build it safe for use for the masses? I don't see any of you talking in these terms and I wonder why that is? You say you want to change the world but I don't see any of you thinking in these terms nor do I see any of you willing to get behind someone that is thinking in these terms.


In the past I when I told people this technology must go into mass production I was laughed out of the room by a lot of very selfish people whom the words Selfless Service is considered a bad word. Right now the Lord and Surf relationship has changed into the Employer and Employee relationship and the many governing systems like, Capitalism, are running on the knifes edge on the verge of collapse, and the propaganda the rich put out is losing it's effectiveness. As the world heats up and life becomes very hard for all of us just remember we all are to blame, even if you never burn't a fossil fuel a day in your life as you did nothing to stop others from doing so so enough with the blame game.


So, word to the wise when you see people like me trying to do good don't try and shame us into giving you everything we know because you are a selfish jerk and are only looking out for number one not understanding how the world works, okay? Take the time to look at the big picture and know the creator of all things, YAH, ways will always win out as the house always wins as never forget he created all of this. Learn to do more for others than you do for yourself, trust me it does make you feel good inside🥰.[/font][/size]
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 03:15:14 PM

H2Power,

It is sad to read your words because of truth in them.
People spend decades and lots of money and it never pays back.
It is right to make money, but is obligation to put FE in open market.
It is crime to make money and FE tech ends up in some vault forever.

Heroic did is to give FE tech for free. And is hard.

But Tesla did, and look how many new technologies emerged.
He wasnt selfish, and he had lots of money for a while.

So, what is right?
And what is wrong?

There is none.

Things will play as they must.
Title: Re: RANT CAFFE ASYLUM
Post by: Johan_1955 on September 15, 2020, 03:49:28 PM


Its about the system behind the system, and its repeating now again without the most noticing, the last is the BIGGEST for us to shame on!


With this loaded movie try to understand the other side, how it was played in those other but very similar times?


https://archive.org/details/AdolfHitlerTheUntoldTRUEStory (https://archive.org/details/AdolfHitlerTheUntoldTRUEStory)


Its not about Continents or Countries, its about some Power addicted people behind the Politic facade, FreeMasons and ....... find who they are.


When we let, Earth will become a PrisonPlanet, initiated with a Fake pandemie and complete corrupt media!
 
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 15, 2020, 03:55:28 PM
OPEN LETTER TO STEFAN,

Many years ago before forums, you and I discussed means and methods of electrophorus.  You had a can of tuna as I recall stuck to the bottom of a kitchen cabinet with electrostatic forces only.  Remember?

Respectively now I say to you that you have allowed your forum to digress into a cesspool of lies, accusations, and never ending worthless clip art from the likes of EMJunkie and Frisky Fritz.  There are some respectable and serious researchers here trying to achieve your original goals but the above mentioned have turned this forum into a den of absolute bull shit!

So, I wish to be banned from this forum as I will never contribute anything here to further the research into Free Energy as long as these people and their like are allowed to continue here.

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 03:56:38 PM
Ed
I never thought of you in my posts to Chris
Your tech needs much effort and investment


What Chris says he holds costs dollars to build
A true gift to the world


And yes we need to be servants to this cause
Passionate servants
Here a post I wrote to
Chris a week ago trying to explain
That he removed
Title: Re: RANT CAFFE ASYLUM
Post by: Johan_1955 on September 15, 2020, 04:54:38 PM


https://www.youtube.com/watch?v=qSIcc5iHz6Y (https://www.youtube.com/watch?v=qSIcc5iHz6Y)
 
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 05:44:32 PM

https://www.youtube.com/watch?v=qSIcc5iHz6Y (https://www.youtube.com/watch?v=qSIcc5iHz6Y)

After watching this movie one must wonder?

Is this for real?
If it is?  , it is creepy that elite plays with people like that, in plain sight.
In the world we currently living, everything is possible.
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 15, 2020, 05:57:59 PM
partzman
Quote
Respectively now I say to you that you have allowed your forum to digress into a cesspool of lies, accusations, and never ending worthless clip art from the likes of EMJunkie and Frisky Fritz.  There are some respectable and serious researchers here trying to achieve your original goals but the above mentioned have turned this forum into a den of absolute bull shit!

So, I wish to be banned from this forum as I will never contribute anything here to further the research into Free Energy as long as these people and their like are allowed to continue here.

In my opinion your doing exactly what they want and it's important to understand your being gaslighted. Do the research, understand what gaslighting is and how people use it. Gaslighting...manipulate (someone) by psychological means into questioning their own sanity.


https://www.psychologytoday.com/ca/blog/here-there-and-everywhere/201701/11-warning-signs-gaslighting
Quote
Gaslighting is a tactic in which a person or entity, in order to gain more power, makes a victim question their reality. It works much better than you may think. Anyone is susceptible to gaslighting, and it is a common technique of abusers, dictators, narcissists, and cult leaders. It is done slowly, so the victim doesn't realize how much they've been brainwashed.

Does this sound familiar...
Quote
1. They tell blatant lies.

You know it's an outright lie. Yet they are telling you this lie with a straight face. Why are they so blatant? Because they're setting up a precedent. Once they tell you a huge lie, you're not sure if anything they say is true. Keeping you unsteady and off-kilter is the goal.

2. They deny they ever said something, even though you have proof.

You know they said they would do something; you know you heard it. But they out and out deny it. It makes you start questioning your reality—maybe they never said that thing. And the more they do this, the more you question your reality and start accepting theirs.

3. They use what is near and dear to you as ammunition.

They know how important your kids are to you, and they know how important your identity is to you. So those may be one of the first things they attack. If you have kids, they tell you that you should not have had those children. They will tell you'd be a worthy person if only you didn't have a long list of negative traits. They attack the foundation of your being.

4. They wear you down over time.

This is one of the insidious things about gaslighting—it is done gradually, over time. A lie here, a lie there, a snide comment every so often...and then it starts ramping up. Even the brightest, most self-aware people can be sucked into gaslighting—it is that effective. It's the "frog in the frying pan" analogy: The heat is turned up slowly, so the frog never realizes what's happening to it.

5. Their actions do not match their words.

When dealing with a person or entity that gaslights, look at what they are doing rather than what they are saying. What they are saying means nothing; it is just talk. What they are doing is the issue.

6. They throw in positive reinforcement to confuse you.

This person or entity that is cutting you down, telling you that you don't have value, is now praising you for something you did. This adds an additional sense of uneasiness. You think, "Well maybe they aren't so bad." Yes, they are. This is a calculated attempt to keep you off-kilter—and again, to question your reality. Also look at what you were praised for; it is probably something that served the gaslighter.

7. They know confusion weakens people.

Gaslighters know that people like having a sense of stability and normalcy. Their goal is to uproot this and make you constantly question everything. And humans' natural tendency is to look to the person or entity that will help you feel more stable—and that happens to be the gaslighter. 

8. They project.

They are a drug user or a cheater, yet they are constantly accusing you of that. This is done so often that you start trying to defend yourself, and are distracted from the gaslighter's own behavior.

9. They try to align people against you.

Gaslighters are masters at manipulating and finding the people they know will stand by them no matter what—and they use these people against you. They will make comments such as, "This person knows that you're not right," or "This person knows you're useless too." Keep in mind it does not mean that these people actually said these things. A gaslighter is a constant liar. When the gaslighter uses this tactic it makes you feel like you don't know who to trust or turn to—and that leads you right back to the gaslighter. And that's exactly what they want: Isolation gives them more control. 

10. They tell you or others that you are crazy.

This is one of the most effective tools of the gaslighter, because it's dismissive. The gaslighter knows if they question your sanity, people will not believe you when you tell them the gaslighter is abusive or out-of-control. It's a master technique. 

11. They tell you everyone else is a liar.

By telling you that everyone else (your family, the media) is a liar, it again makes you question your reality. You've never known someone with the audacity to do this, so they must be telling the truth, right? No. It's a manipulation technique. It makes people turn to the gaslighter for the "correct" information—which isn't correct information at all.

Do you see what's going on?. This is how these populist types operate however once we understand what is actually going on it's 100% predictable and almost comical to watch. Don't fall for there bullshit and the only solution is to remove these people from our lives. Don't give them the oxygen these crave, ignore or remove them.

If you start a petition to ban Chris and all his fake aliases I will sign it. He wants to destroy this forum to empower his own, it's not rocket science.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 06:35:40 PM
OPEN LETTER TO STEFAN,

Many years ago before forums, you and I discussed means and methods of electrophorus.  You had a can of tuna as I recall stuck to the bottom of a kitchen cabinet with electrostatic forces only.  Remember?

Respectively now I say to you that you have allowed your forum to digress into a cesspool of lies, accusations, and never ending worthless clip art from the likes of EMJunkie and Frisky Fritz.  There are some respectable and serious researchers here trying to achieve your original goals but the above mentioned have turned this forum into a den of absolute bull shit!

So, I wish to be banned from this forum as I will never contribute anything here to further the research into Free Energy as long as these people and their like are allowed to continue here.

Regards,
Pm

I will skip the long speech.

My vote is same as before.

Yes!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 06:37:57 PM
OnePower,

Can I ask you? , what is your area of interest in FE?

Mine are resonant circuits and extraction of energy from them.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 15, 2020, 07:22:18 PM
how do we fix this ?
we need members not isolating ...
Chris is not typical member ...he has beautiful forum and works very hard there. and I am certain has persons with same goal as Mission statement here.
I am actually amazed at all the work Chris did in his forum
How do we unite and stop division ?
and here I want to write something Whacky...something Partzman and I discussed the other day...does faith play a part in what happens on the bench...?
I have read this before...and partzman feels something similar has happened at times to him...[results seem to come and go]

A few years ago there was a study in Sweden on chickens ...they had chickens with nice happy life ...hatched the eggs and nice happy chickens were born
They took the baby's and raised them in horrible frightening environment...their baby's were maniacal restless beasts ...their DNA had somehow gotten a message that the environment was quite dangerous ...and the next generation came prepared to fight...evolution or DNA ?...and environmental stimulus... immediate change or result in one generation...suppose all of these DNA strands we have ...contain other abilities..we don't yet understand...
suppose a mustard seed can move a mountain...or a builder can manifest some environmental change [belief]
we talked about some of this...why does Chris see results on his bench that others can't replicate...?
and why do some of his followers also see the same ??
just putting a thought [which I personally believe can be possible [Daniel Pomerlou [spelling]..Canadian savant ..who has now passed away
trying to be kind too..hoping for the best result and not more fighting and........Division.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 07:43:58 PM
I see your point.

Remember, when Chris come here, I was first who welcomed him,
and my wish was to work all together.
Problems started when after 2 months he did not starting any project.

Question is: does Chris really has something?
Or it is a story to attract followers?
I did not saw any of nis member having that results.
His members probably never saw his device, just as us.

Fix lies in Chris himself.
But he wants only his forum to live and this, for this he does not care.

Is his device real? Nobody saw it ever. Even his members.

From beggining evefyone here was for cooperation except Chris.

If you have suggestion I will gladly listen and help.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 07:52:40 PM
Maybe bucking coils work in some combination.

But Chris implementation of bucking coils does not work.
I tried.

Or he lies, and did not show real thing.
In that case he also.lied to his members.
They are just as us, confused. For years no real result.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 07:55:49 PM

For years nobody saw Chris device,
Not us, not his members, not on overunityresearch.com.
Nobody.

A myth.

Is it real?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 08:19:51 PM
CaptainLoz from Chris forum started to doubt that bucking coils,
Chris implementation work?

His members are also in dark.

And Chris himself does not doing experiments.

Always someone else does experiments for him,
under his command.
On overunityresearch.com it was Itsu.
Here, Chris expected from members to do the device while he observes and comments.
Same on his forum. Others are working and he bosses them or us.

Is it odd?

Where is his work?
With his hands.

Too many mysteries around that device, too many.
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 15, 2020, 08:20:37 PM

Its about the system behind the system, and its repeating now again without the most noticing, the last is the BIGGEST for us to shame on!


With this loaded movie try to understand the other side, how it was played in those other but very similar times?


https://archive.org/details/AdolfHitlerTheUntoldTRUEStory (https://archive.org/details/AdolfHitlerTheUntoldTRUEStory)


Its not about Continents or Countries, its about some Power addicted people behind the Politic facade, FreeMasons and ....... find who they are.


When we let, Earth will become a PrisonPlanet, initiated with a Fake pandemie and complete corrupt media!


You seem to see the big picture as it is true what the scriptures say, "Satan will fool the whole world." The only way to awake from, "The Strong Delusion," is with the truth. Failure to accept the truth in any way leads right back to being trapped in The Strong Delusion.


It's interesting that right now some of my people are waking up to their true history, some like me only needed to learn one truth, and that truth was the letter "J" was invented in 1478. I awoke to the truth of my heritage in August of 2014. But interestingly I learned that there are a lot of people whom hate my people just a year prior to that as once it was known that I am a Negro all of the funding I was getting to aid my efforts to bring out this technology stopped cold turkey. There are a few that still give me aid from time to time and for that I am truly thankful, but the vast majority of people whom supported my efforts to bring this technology out could no longer do so just because I am a Negro due to their hatred of my people in their hearts. Fast forwards to today and you have people totally outing themselves with their support for Trump as they support him for the racism as that is what they are actually looking for in a leader.


I can remember talking with a few people in the hho community about trying to use this technology to help my people and they immediately took offence to that and started calling me, the powerless, a raciest for wanting to help my own people. I didn't limit my help for others but just wanted to actually do something for those whom are totally left out of the loop in life by the European powers. Once I understood the power of this technology I knew it will give people a fighting chance against the NWO in being able to resist their One World Government as it puts the individual in full control of their own energy needs and this "Evil in High Places" uses the supply, utilization, and production of energy to control the masses and these FE technologies free the people from that type of control. I look at this technology as doing what the Cell Phone technology did for the poor that were left out of the loop due to their governments not being able, or in most cases, allowed to set up land lines by not giving them loans for them to do so. Many before the invent of the cell tower where left totally out of the loop and owning a telephone was just a dream. The Cell Phone technology allowed them to leapfrog that old technology as no longer did they have to spend hundreds of billions of dollars on laying down the infrastructure the old telephone lines, internet cables, and other things that went along with that old technology and totally leapfrogged that old technology allowing them to have the internet and cell phones for the first time ever. I can see the technology I am working on will do the same thing in allowing those that were left out of the loop to leapfrog that old technology of having to build power plants, grid tie systems, and all else that goes with this power distribution technology the rich use to enslave the world. No more paying for energy of any type or kind is what this technology brings to the masses.  Solar and Wind energy making systems where tied to the grid making them practically worthless to the end user, us, as the system of energy enslavement remained intact. It was interesting to look at my energy bill and see that I would be charged more for wanting to accept wind energy. That totally didn't make any sense as the harnessing the power of the wind didn't require any processing what so ever, nothing was dug up out of the ground, shipped to a processing plant, processed and burnt for fuel to power the old power generation technology. Did I miss something here? As why am I being charged more for technologies that harness the Wind or Sun for energy? The answer was the Grid system is a system of control of the masses keeping people slaves to the energy they provide. People work a lot of hours to pay these systems of energy enslavement and at any point you no longer wish to pay they cut you off. No more driving your car around and no more powering up your homes keeping the warm in the winter and cool in the summer, and most importantly no more storing and cooking food effectively in the comfort of your own home.


Stanley Meyer understood some of this as he talked about what would happen if the world's supply of oil was cut off cold turkey? He knew that the trucks, ships, planes, and trains would not be able to ship food to the masses stocking up their supper markets with food. He also knew the bigger you are the faster and harder you fell. If you are totally poor you don't have far to fall but if the system is set up using these energy enslaving technologies you stand to lose your way of life if the flow of oil and coal is cut off. But these FE technologies leap frog that old technology which in turn frees the enslaved. Pulling one's self up by your own bootstraps is a myth and a lie the rich use to keep people working for them making them rich and sustaining their way of life as they rob their employees of their labor not paying them their far share for the work that they do. How many packages a year to you think Jeff Bezo delivers a year? The answer is none as his workers do that for him and he in turn won't share the wealth with them. I don't plan on being this type of an Employer as I like the worker controlled business model where the workers have a say in what goes on in the company. But I also realize that some are more gifted than others in being able to solve big problems and have the desire inside of them to seek out ways to change the world for the better. A lot of times the rich actively seek out these people to once again exploit people and pay them next to nothing in return for their brain power. There is a saying going around that states, "No one earns a billion dollars a year, they steal it from others." I want to be the type of Employer that spreads the wealth to those that are actually doing the work as to me it just seems like the right thing to do.


So, now you all can see all of this infighting only supports your further enslavement. Trying to shame people into sharing their brain power is totally selfish when you are not willing to actually get behind them and support their efforts to bring these enslavement systems to an end. Your mind is trapped in the Matrix the rich raised you in to service them as you attempt to become them and live the good life above everyone else that you ever knew not realizing that too is a trap. It's hard to undo these things but it's not impossible. You can change your way of thinking by accepting the truth of our reality and realizing how the game is played and actively trying to undo and not be apart of their game as it always leads to the enslavement and exploitation of others. Can you wake up from the Matrix, but an even better question is, "Do you want to wake up from the Matrix?" As I stated once I learned the the letter "J" was invented in 1478 that undid a lot of lies I was told and raised to believe and lead me to awakening to the truth of my heritage of actually being Israel by blood. And if I can wake up so can all of you but again the question remains, "Do you want to wake up?"


Being nice to others isn't a crime, well in today's world it is, but it shouldn't be that way and all of you reading this know it.
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 15, 2020, 09:27:56 PM
Ed
I never thought of you in my posts to Chris
Your tech needs much effort and investment


What Chris says he holds costs dollars to build
A true gift to the world


And yes we need to be servants to this cause
Passionate servants
Here a post I wrote to
Chris a week ago trying to explain
That he removed


I understand as most people don't know in the scriptures this, "Strong Delusion" equals the "Matrix" today as they are both the talking about the same thing. Most don't realize they are trapped in the Matrix and they see things through the prism the rich gave them to see through. I was once one of those people as if you remember correctly I was very mean to others at first as that was the way I learned how to be from others in forums like these. But once I awoke from the Matrix all of that changed and I am hoping Chris sees the light and awakes too.
Taking the blue pill only leads one to believe what ever the rich tell them to believe as it's a lie that you wake up believing in what ever you want to believe. Taking the red pill leads to the truth and it's a deep rabbit hole where a lot of what you thought was true must be unlearned.


As far as what type of Employer I will become in the future I truly like the "Worker Co-Opts" model so in the end I guess I will build up a company and then hand it over the the workers to control and govern it. That frees me up in life as I will not get into the trap of the rich as they too are trapped in the Matrix.


I looked at Chris's technology he has gotten into and don't understand it all that well, but if that is his passion I leave him to it. All I know is this Dr. Dingle's technology has the power to free the entire world from the energy enslavement system and that is something worth pursuing. But I also understand that I have to follow the rules of the Matrix to get this technology into the hands that need it the most. Sucks as I wish I didn't have to follow their rules but I am not a rich man thus can't afford to buy things in bulk to get the best prices for everything. I will have to start off small and work my way up knowing that big things often have small beginnings as I have to believe that.


But unlike those that came before me I went and posted the science behind the technology so that if I pass away the technology doesn't pass away with me as it has done so so many times in the past. It's now already different as I gave that part of the technology away. In time people will understand just what I have done and move to make use of the science I posted if only for their own survival when things get truly rough and desperate as the earth heats up. It has been said the we have already passed the point of no return and now must live through our combined sins to the planet and try and survive the best way we can. Hopefully people pull together to help one another and abandon the teachings of the rich.


I have a lot of work to do in building up a company but I have taken the right steps in that direction as I need to get the things that are needed to build this technology on my own at a pace my pocket book can afford. I keep trying to raise funds but it's slow going but I keep hope alive in my heart so I press on.


Take care Chet K,
Edward
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:21:19 PM
Johan_1955 and h20power see with eyes of wisdom
we see two sides here
one side is not helping humanity
white slavers or chattel slave is what they want you to be
there is only one way out
educate
unite
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:30:48 PM
minimal investment
time is what it takes
understanding
3 coils
2 diodes
build a step up dc transformer
add third coil in opposition to the secondary
secondary and third coil must be in resonance
finding optimum operating point
follow exactly what Chris gives you and it will work
make steps to improve like all technology
once you have the understanding you can build in ten minutes
it is so easy
dont let your mind complicate
your mind will try
magnetic fields must be + - + using right hand grip rule
three
asymmetrical
do not derail
stay on target
we do this for love
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 10:42:20 PM
Johan
H2OPower
Fritz
Emjunkie

Or simple Chris.

Time will tell what will happen.

Just be cautious.
If you invest heavily, and the bird gets its wings before you unrole your plan,
it could be devastating.

You never know.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 15, 2020, 10:43:16 PM

You choose lone path.

Good luck!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:57:35 PM
minimal investment
time is what it takes
understanding
3 coils
2 diodes
build a step up dc transformer
add third coil in opposition to the secondary
secondary and third coil must be in resonance
finding optimum operating point
follow exactly what Chris gives you and it will work
make steps to improve like all technology
once you have the understanding you can build in ten minutes
it is so easy
dont let your mind complicate
your mind will try
magnetic fields must be + - + using right hand grip rule
three
asymmetrical
do not derail
stay on target
there are no secrets
there are no secrets
there are no secrets
we do this for love
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 15, 2020, 10:58:34 PM
many chattel slaves here
lost to satan, no joke
all can see
is obvious
exposed
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 16, 2020, 01:01:10 AM
Whatisit
Quote
Remember, when Chris come here, I was first who welcomed him,
and my wish was to work all together.
Problems started when after 2 months he did not starting any project.

Question is: does Chris really has something?
Or it is a story to attract followers?
I did not saw any of nis member having that results.
His members probably never saw his device, just as us.

Chris doesn't seem like a truly bad person but his actions and language parrot that of donny trump.

Remember the 2016 election, trump was promising the world and there was much hope. Four years later everything has come off the rails, the economy is a train wreck, record unemployment, record debt, gross incompetence during the pandemic and allies who can't trust the U.S. anymore. This is what happens when the populists lure people into blind faith and false hopes with no facts. I have met many people like this and in every case it always ends in a train wreck.

Hell, I would like to believe as much as the next person however I know how this story ends and it's not good. Look at my gaslighting thread then read EMJ's posts, you can basically check every box off from 1 to 11. He fits the gaslighting profile to a tee so there should be no mystery as to what his intentions are in my opinion.

So no, I'm not buying the bs, show me justification, show me proof, show me the facts or it's simply more bs in my opinion. I would put it this way, hope isn't going to pay the rent or put food on our table and there are a great deal of con men and snake oil salesmen peddling false hope lately.

Maybe it's because I'm a farmer... we can seem to smell bullshit a mile away, lol.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 01:14:06 AM
read, educate, unite, under love and selfless service for your brothers and sisters
silly people keep doing silly things, they are lost
no more chattel slaves
we do this for free
for love
Fritz

Ramsheep
here: https://youtu.be/txHtgwVm2-8
now go build it
can you
is there any other way
you keep writing diabolical slop
so much silly in you
you loose credibility when write so much diabolical slop
humanity must learn to help itself
if it cant help itself it cant survive
plant a seed
grow a garden
build knowledge
the welfare you demand is absolute failure of a race destined for greatness once welfare is destroyed and replaced with hope
you keep writing diabolical slop
you keep writing diabolical slop
you keep writing diabolical slop
how about change
Fritz

Ramsheep
my name is Fritz
if the child above was yours
what would you do to help the child
support the child and encourage to grow a garden
grow crops
learn how to sink a well
how to harvest water
how to build a house
how to clean up the yard
how to be clean
how to wash
how to learn
how tomorrow can be made better than today
you see, you are so silly
if the child can help itself
when youre gone, you do not need to worry
the child can look after itself
Ramsheep so much diabolical slop from you
learn about social science and evolution
a sloppy approach to serious matters is not acceptable
especially when you use the poor for your advantage
Fritz

Ramsheep
you are lost to satan, no joke
there is no reasoning with you, no joke
there is no helping you, no joke
you know nothing of logic, no joke
you are not capable of sensible dialog, no joke
Fritz

Johan_1955 and h20power see with eyes of wisdom
we see two sides here
one side is not helping humanity
white slavers or chattel slave is what they want you to be
there is only one way out
educate
unite
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 01:29:05 AM
Whatisit
Chris doesn't seem like a truly bad person but his actions and language parrot that of donny trump.

Remember the 2016 election, trump was promising the world and there was much hope. Four years later everything has come off the rails, the economy is a train wreck, record unemployment, record debt, gross incompetence during the pandemic and allies who can't trust the U.S. anymore. This is what happens when the populists lure people into blind faith and false hopes with no facts. I have met many people like this and in every case it always ends in a train wreck.

Hell, I would like to believe as much as the next person however I know how this story ends and it's not good. Look at my gaslighting thread then read EMJ's posts, you can basically check every box off from 1 to 11. He fits the gaslighting profile to a tee so there should be no mystery as to what his intentions are in my opinion.

So no, I'm not buying the bs, show me justification, show me proof, show me the facts or it's simply more bs in my opinion. I would put it this way, hope isn't going to pay the rent or put food on our table and there are a great deal of con men and snake oil salesmen peddling false hope lately.

Maybe it's because I'm a farmer... we can seem to smell bullshit a mile away, lol.

Regards

What are his intentions?

If you dont buy this BS, find the proof by yourself.
Dont wait me to do it for you.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 01:48:52 AM
Chris gives me the link: http://www.aboveunity.com/Downloads/Black Panther Farther in Spirit Scene - We are ALL Kings.mp4 (http://www.aboveunity.com/Downloads/Black Panther Farther in Spirit Scene - We are ALL Kings.mp4)
the welfare you demand is absolute failure of a race destined for greatness once welfare is destroyed and replaced with hope
we see two sides here
one side is not helping humanity
white slavers or chattel slave is what they want you to be
there is only one way out
read, educate, unite, under love and selfless service for your brothers and sisters
educate
unite
we do this for free
Fritz

Quote
There’s a plot in this country to enslave every man, woman and child. Before I leave this high and noble office, I intend to expose this plot!

Ref: President John F Kennedy
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 16, 2020, 04:17:42 AM
Johan_1955 and h20power see with eyes of wisdom
we see two sides here
one side is not helping humanity
white slavers or chattel slave is what they want you to be
there is only one way out
educate
unite
Fritz


Thanks, but know I see because I was allowed to awake to the truth. It is written in the scriptures that these events will take place the great war, and before that small wars and rumors of wars. People like to think that slavery was done away with in America but the pill hard to swallow is slavery just got put under new ownership now owned by the States and Federal Government. It says so right in the 13th Amendment for all to see right out in the open that slavery exist as a punishment for crimes. Who gets to say what a crime is are the new slave masters, and those that enforce their rules do so with the understanding they are gathering up people to be slaves.
As a felon you lose your citizenship in a way as you can't vote in most places, can't get certain types of jobs, can't get on government assistance programs, and yet are expected to make it in the world with both hands tied behind your back. Most end up going right back into prison as a way to just survive. In California they have these slaves fighting the fires to protect their homes fully knowing once these people get out they can't get hired as a fire fighter because they are felons so what was the point of teaching them those skills? Learning to see the world for what it is takes courage as this what I am telling you know is how the world is right now.
I wonder how many will keep playing the Blame Game and never get around to trying to build or help those whom are trying to change the world for the better? But there is something else I think I forgot to mention and that is the safety of these technologies as if you build it and hook it up to your home and you did something wrong and it ends up burning down your home the insurance company isn't going to pay a dime. If you hook up your Tesla to the power system and it damages the car Tesla isn't going to fix the problem. In their world it needs to be UL tested and that cost big bucks.


Many of you seem as if you were born yesterday when it comes to knowing the true rules of the world around you. But I guess waking up to these things is still a good thing for at least you didn't die believing the lies. Have any of you seen just how much it cost to have something UL tested? It's quite shocking as the last time I checked it's something like 3 million or more to undergo that type of safety checking. This is yet another reason why this technology has to go into mass production as if it isn't UL tested or some other form of accepted testing method it will not be allowed to put on your homes, cars, and other devices or equipment. These are the current rules of this world we live in. You or I didn't create them but for the time being must comply with these rules. So, my suggestions to you all is learn just that it takes to build something and put it on the market and stop assuming things. Stop all of this infighting as it only leads back to the Matrix.


I didn't know that Chris had posted Tinmans personal information on the net but to try and do that to me isn't going to work as I had to put down my address due to the fact I have a business so I can't be threatened that way. I respected Tinmans hard work and effort he'd put into trying to solve unknowns. It's not easy to get at the science behind a lot of these FE technologies as most of the time it is not intuitive whatsoever, but to be punished for trying is a new low in my book. I think in the past some people tried to do that to me in using fear as a means to get me to divulge all that I know about the technology but it doesn't work on me as I was militarily trained and know how to defend myself if I have to. People often ask me why I don't hide my true name and I would say to them those in power already know who I am, but their world is closing in on them and they need a solution to the problems their way of life has caused to the globe so they let me be to see if I have the solutions they need. The fear is being used in these forums as a means of self control or crowd control to stop these technologies from seeing the light of day but I hate to inform you that those happy times are over. The world is now just starting to show the many years of damage our way of life has done to it and know this is just the beginning. Just today I saw for the first time ever 5 tropical storm systems have been created that more than likely will develop into hurricanes at the same time. The earth has been shaking a lot around the "Ring of fire" so where I live might be pulled into the ocean in the future. The earth is changing and the rich now need our brain power they fought tooth and nail to keep out of their way of life because it cost their bottom line but now their lives are on the line as these changes will effect all of us as there is no planet "B."
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 05:15:38 AM
h20power you are wise
but seem to over look an important fact
some here do work against you
there is no reasoning with them
they actively lie
it is easy to catch their lies
its obvious
Ramsheep claims Chris posted others information
I would like to see
wouldnt you
Ramsheep, show where Chris EMJunkie has done such a thing
trusting anyone here is not wise in the light of visible behaviour
trust is earned over time
not on face value
many people here do silly things
say silly things
example below
Fritz



Hi FriskyFritz and EMJunkie,

You guys refer to Tinman's rotary transformer setup and you completely disregard it includes a permanent magnet
embedded in the stator core.  Your partnered output coils setup does not include a permanent magnet.
This fact (together with Tinman's own switching circuit for his setup) is a game changer: you have
been comparing apples to oranges for years.
Tinman's setup has nothing to do with your setup and no amount of reference to his work justifies your claims.

Tinman did mention the bucking coils but to get over or aboveunity, the use of bucking coils in itself is simply not enough:
you would need to know the switching sequence in the rotary transformer setup which includes the permanent magnet too.
Your setup simply does not have these ingredients. Here I give the benefit of doubt for Tinmans setup, considering the help in
the measurements he received back then from other forum members.

Gyula

PS  I posted this same text in the EMJunk thread a few minutes ago but the watchdog over there deleted it.
So I repeat the same here.

read this post
look at what this person is saying
we refer to evidence
a self running device does not have the ingredients
I laugh so hard at this silly
serious trollage
proof of magnet
you have no proof of a magnet
you speculate
speculation from a lie told
math shows your lie
free run on switch off shows your lie
no modifications: https://youtu.be/qCcJDyzYkL8 shows your lie
lies lies lies
more lies
more lies
more lies
facts are truth
evidence is truth
these people know nothing of truth
make judgement on their actions and the evidence
shun the liars
see them for what they are
bottom dwellers of humanity
exposed
Fritz

https://youtu.be/xmJr4_gHygo
https://youtu.be/FSsmScZqMts
https://youtu.be/fpcqMPvcoW0
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 16, 2020, 06:04:47 AM
h20power you are wise
but seem to over look an important fact
some here do work against you
there is no reasoning with them
they actively lie
it is easy to catch their lies
its obvious
Ramsheep claims Chris posted others information
I would like to see
wouldnt you
Ramsheep, show where Chris EMJunkie has done such a thing
trusting anyone here is not wise in the light of visible behaviour
trust is earned over time
not on face value
many people here do silly things
say silly things
example below
Fritz


I didn't over look it and trust me I know there are a lot of people on these forums that work against me. I just didn't take the time to try and get Tinman's part of the story as we had a falling out many years ago. You see on this very site I posted the science behind this water for fuel technology and those that don't want it to see the light of day Buried it with a bunch of garbage post to try and hide what I posted for all to have free of charge. But they failed as I can post links to the information directly and have already done so on this very video in a pinned post: https://www.youtube.com/watch?v=EkjpVcsRQLc&lc=UgwOo9RRq3fr3qAsGvV4AaABAg&ab_channel=EdwardMitchell
Then I went on Chris's new forum and posted even more information on the actual science behind this technology. As I stated before if I die now the technology will survive me as I learned from the mistakes of those that came before me and took the technology with them in death.
So, in all truth I don't know what happened to Tinman but we have bigger problems to deal with right now as our world is complaining that we exist on it right now. Will it send a plague(s) to wipe most of us out? Will fire consume all the land we need to grow food and raise livestock on? Will all the over fishing keep collapsing the fish populations we are trying to catch to the point there are no more fish in the sea and other water ways? Will the water levels keep rising and force us to move to new places further taking away the land we need to grow crops on and raise livestock? We are facing extinction and you want me to focus on these trivial matters?


You see for that is to be cleared up Tinman himself has to come forwards with his side of the story as until then it's all hearsay, isn't it? But the world is changing right now as we are living through those bad days the scriptures talked about we would all have to go through. So, I say we have bigger problems to worry about right now wouldn't you agree?
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 06:10:55 AM
yes
I read your posts
well done
you have done humanity a service
Chris is thankful for your contribution I am sure as all are
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 09:02:52 AM
as they loose control of one thread they start another: https://overunity.com/18628/are-you-being-gaslighted/
read, educate, unite, under love and selfless service for your brothers and sisters
we do this for free
we do this for love
we do this for freedom
make sure you are well educated on who is gaslighting here
truth tellers do not fit the profile
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 09:50:12 AM
Johan_1955
FriskyFritz
H2OPower
Emjunkie

Hello Chris, how many alt´s more you have?

Hail Chrys HYDRA!

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 10:26:21 AM
beware lying
an example of how bad this is

Quote
There’s a plot in this country to enslave every man, woman and child. Before I leave this high and noble office, I intend to expose this plot!

Ref: President John F Kennedy April 27, 1961 Speech

President John F Kennedy April 27, 1961 Speech: https://www.youtube.com/watch?v=1ZrRXj_cOhI
Google results in image
beware the liars
blatant lies
blatant censorship
blatant propaganda
blatant gaslighting
blatantly obvious
shun the liars
if google is doing it
who else is doing it
facts are truth
evidence is truth
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 10:51:40 AM
OnePower,

It is ok to do nothing, it is your point of view.
If we all remained passive like you, today you would not know with whom you been talking on this forum.

Johan_1955
FriskyFritz
H2OPower
Emjunkie
Chris Sykes

And there are probably more.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 11:03:31 AM
And there is one more, hyig.

hyig
Johan_1955
FriskyFritz
H2OPower
Emjunkie
Chris Sykes

Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 11:21:22 AM
Okay,FriskyFritz,from neutral position,to your #180 offer :
this arrangement of 3 coils gave you which measurement results by which kind and quality of load  ?
Give your own experience results - not from others- !

Sincerely

Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 11:30:11 AM
lancaIV
elite member
you honestly ask this question
if you had read you would have seen what load we use
results can be greater than 1.0 if the person doing the experiment is smart enough
very easily
nothing hard
very easy
very simple
no secrets
no secrets
no secrets
we have given you everything
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 11:34:09 AM
FriskyFritz,you overrun by reading the poste :
I did not wrote to "we" but to the forum member FriskyFritz :
which are your own measurement results !
Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 11:38:14 AM
we at aboveunity.com follow the layout given us
the same layout Chris gave you all here
we made it work
we have succeeded
most of us
all at different stages
lifting the finger is the start
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 11:52:51 AM
FriskyFritz,can you anymore write for yourself ?
What you did,what you measured ?
Your own experience ?

Here you are and represents overunity.com forum member,not an other forum member !
I do asking you now for the third time :
can you give me/all us here your details about your "bucking coils arrangement",probably with picture and better as video !?

Coils thickness and length et cetera ...
Not Tinman,Chris Sykes or others their demonstration,show us yours !
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 11:56:13 AM
all I will tell you is it works and can go above unity very easily
it is very easy to build
it is very cheap to assemble
it requires very few parts
you are welcome to publish your results when you get it working
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 12:09:50 PM
FriskyFritz,zero points !
Bad repeat ,shows that you for yourself never did own tests !
With different arrangements,for comparison,for improvement trials !
When you work in FE R&D ,sometimes you have  to become a ' berserker',1000 full hours investment is nothing related real research !
When above ≥1,under no load condition' = the two coils behaves like storage ?
By different duty cycle condition ?
It is wiser to make the own experience for the later 'peer/-s approvement' ,f.e. TUEV,UAL (atteste/avail) and similar consumer care institutions !
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 16, 2020, 12:11:50 PM
https://www.youtube.com/watch?v=QfAXbGInwno&ab_channel=Vox I wanted to add this video in here to get all of your minds on what is important as a way to cut all of the infighting with the he said/she said stuff. It's our children's future we are stealing by kicking back and doing nothing.


In order for any of these FE technologies to make it to market it will require the support of the people. Those like me trying their best to bring one of these technologies to market need not just your support but the support of all that will be effected if nothing is done to turn things around fast enough. For energy generation and transportation this Dingle/Meyer technology fits perfectly as if it is done correctly an engine will actually clean the air when they are in use, and it is the only known FE technology shown to be useful in jet engines and rockets. As such this is one of the only technologies I am interested in looking into as it shows the most promise for solving a wide range of problems we need to address. It can be used to cook with, heat our homes and businesses, convert many types of engines to run cleanly, and generate electricity. It can also be used for welding applications, melting metals, a few other things like blast furnaces to dry wheat. So, as far as these FE technologies go this Dingle/Meyer technology seems to be our best choice.


So, as a result I ignore all the other FE technologies as they don't solve a wide range of problems like the Dingle/Meyer technology does. I do this because I have children that I love and care for as I no longer want to kick the can down the road for them to deal with in the future. If anyone knows of a FE technology that better suits our needs please share so I can get a look at it and explain why is it better than Dingle/Meyer technology in your own words.
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 12:23:08 PM
h2Opower,the conventional FE-devices market in kind of photovoltaic and windparcs only got explored worlwide by peoples their governmental subsidary decision,not by the people itself !
And I do not see an universal solution but for each kind the propriate solution !
Heating/cooling : hf magnetism
Car engines : electric and/or hydrogen
Electric drives : technical improvement and circuit controler


Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 16, 2020, 02:54:24 PM
Lanca
Did you not read Chris threatened to ban
Himself ( or any of his members)


If they open source

PLEASE DON"T RISK YOUR ACC"T ""ITS NOT WORTH THE EFFORT"" [insert previous Fritz image of starving child of color here ]


Ed, I joined this forum with my sir name in my profile day one when I read the mission statement,, I know you and your heart.. as well your path...we share the same Dream ,your tech needs much more work and investment.
Chris Sykes says he has it all sorted but won't open source , says 10 minutes and you'll have it...few bucking coils and some few dollars....5-10 years the same story...
here he writes of "Love"??
seems a strong hate blinds the Love...and people die [45 million from starvation alone last 5 years [maybe "not worth the effort" wrong color for Chris ?] Dying while he plays God or games... these last 5-10 years for lack of his tech.
so all his members have been warned not to open source  ....OR BE BANNED from Aboveunity forum
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 03:46:52 PM
'accurate measurements' :

Fleischmann&Pons ; going public by which accurate R&D results ?
German inventor Hermann Thoene,magnet motor invention,regional award winning
University Darmstadt laboratory C.O.P. ≥ 1 Testat,later efficiency results : ≤ 20%

When all get by same arrangement same peak/average results everywhere,then we can think about accurate cooperation !

My own experience : even do not trust in technician and engineers their daily experiences,when they have to work and measuring out new concepts !

When you/we give in low power and out there comes human or workbench destroying forces then we are on the right track !

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 16, 2020, 03:52:35 PM
Sorry for double post
However reading Kennedy quotes above  (Read in signature in below profile) reminded me of one very
Precious mentor /servant to open source FE cause [who has since passed away]
Who taught remarkable measurement protocols
Using lightbulbs and other simple methods to measure
Almost to industry standards


Designed to measure complex circuits ( needs to be shared here again since Chris wrote partner coils
make frozen coils that cancel heat)
Sounds like people would show this in experiments ( but now we see that he would ban them ??
We shall see?
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 04:20:51 PM
we at aboveunity.com follow the layout given us
the same layout Chris gave you all here
we made it work
we have succeeded
most of us
all at different stages
lifting the finger is the start
Fritz
FriskyFritz,following www.aboveunity.com (http://www.aboveunity.com) 'Combined Effort Here and at OU.com' '
In the poste from April 24 2020
"NOTE : Your Machine pumps current for allmost 100% off the cycle,but your input is only around 10% ....."

Here I think and say : NO !


Similar arrangement,youtube :
Opposing Bucking Coil Generator (AsymmetricalTransformer) by 'debunkified '= Mark Striebeck (SWE)
Comments : Tom George        and the 'fair'  answer

Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 16, 2020, 05:15:00 PM
FriskyFritz,following www.aboveunity.com (http://www.aboveunity.com) 'Combined Effort Here and at OU.com' '
In the poste from April 24 2020
"NOTE : Your Machine pumps current for allmost 100% off the cycle,but your input is only around 10% ....."

Here I think and say : NO !

Lanca,

Since Stefan is not honoring my request to take me off his forum that was posted and pm'd, I still engage in this ridiculous AU/OU/FE charade!

You and I and a host of other folks here do not believe the words of Chris or Friskie, etc, when they state that they have OU.  So, how do we solve the problem?  Well, one solution might be to investigate the source of Chris' information on "bucking" coils in the first place!  What is the mystery behind all of this?

I invite anyone here who has knowledge about Chris' dealings with Dr. A_____ to come forward so we can go to the source and bypass all the BS.  I know there are those here who know!  We would then know if Dr. A______ really had anything and if Chris was a good steward in passing the info on or if he really has nothing at all.

Chris, Frisket, whoever, claims that those of us who don't have "it" working are stupid and don't know measurements from sickem.  Actually, the evidence points in the opposite direction in this case as no valid measurements are given and there are crossed grounds and who knows what else.

So, who is willing to blow this whole thing open and set the record straight on Chris' antics for these past years?

Pm

PS:  I think I start posting pix of my project cars thru the years-they have at least some electronics in them and are far more interesting than 99% of what Chris and Fritzer post!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 05:48:41 PM
Dr. AG gave the Chris info on bucking coils his team performed at the time.

Chris run away with the info, without hearing whole story about results on bucking coils research.
Bucking coils research were triggered by the work of Floys Sweet,
who was investigated from the team of Dr. AG.
All of the docs on Floyd Sweet which Chris have sourced from Dr. AG.

Thats it , in short.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 16, 2020, 06:14:38 PM
Dr. AG gave the Chris info on bucking coils his team performed at the time.

Chris run away with the info, without hearing whole story about results on bucking coils research.
Bucking coils research were triggered by the work of Floys Sweet,
who was investigated from the team of Dr. AG.
All of the docs on Floyd Sweet which Chris have sourced from Dr. AG.

Thats it , in short.

Thank you!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 16, 2020, 06:38:44 PM
h2Opower,the conventional FE-devices market in kind of photovoltaic and windparcs only got explored worlwide by peoples their governmental subsidary decision,not by the people itself !
And I do not see an universal solution but for each kind the propriate solution !
Heating/cooling : hf magnetism
Car engines : electric and/or hydrogen
Electric drives : technical improvement and circuit controler


Sincerely


How could you not see this Dingle/Meyer technology is a universal solution when it can be used to fully replace the use of fossil fuels and more? If I make a genset strong enough to power your home and run it off of this technology does or does that not end your dependence on the grid? What if I combine it with an existing battery technology that is already being used to power up people's homes in the case of power outages? The genset takes the place of the grid and all that is needed is a water connection to power up the genset. But the technology goes further as Meyer already had a water heater ready for production that utilized this technology.
Be honest with me, did you take the time to watch the video before making this comment? They said they don't have a solution for air travel and this technology gives air travel a solution too. But the main thing I saw that I didn't like in the video is no one is talking to end the Grid Power distribution system so the end user won't see much change in their lives if they switch tomorrow to wind, solar, and battery technology.


You see this Dingle/Meyer technology is a one stop solution as it goes beyond just being used to replace the use of fossil fuels as it replaces all forms of electric power generation and takes it down to the individual level meaning the individual will be in full control of their own energy needs no more electric bills in the mail no more pain at the pump to fill up their cars with fuel, and it can be used to replace propane/natural gas for cooking, but if your home has an electric oven then your all set to go. I don't see any other FE technology capable of doing all that I mentioned and I haven't listed all the other things this technology can do. I haven't talked about Meyer EPG device as I am not sure if I will make that device as I am not fully comfortable introducing a new molecule into our world that the earth has never dealt with before, but I do know how to go about making the magnetic gas as well as other molecules the earth has never had to deal with before and I am not sure that is such a good idea.


So, I will keep it simple and just use the technology to replace all forms of electric power generation and fossil fuel use and if my thinking is correct doesn't that solve our problems right now? Again I don't know of any other FE technology that is capable of doing all of this which makes it the clear choice for a better future for all of us. This technology is a one stop solution is the point I am trying to make when looking at how the energy is currently being used in the video from fossil fuels, Hydro electric, Geo thermal, Nuclear power plants, and Solar & Wind farms. This one technology will replace them all and more as it is the one stop solution the world needs right now and for the likes of me I don't see how you people who call yourselves educated can't see this?


Anyway that's my rant for today as I will leave you all to your thoughts now as I continue to bring this technology to market.
Take care all,
Edward
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 06:52:59 PM
I researched also the hydrogen technology and you are not alone,several dozens industrial projects ,E.U. and/or DOE financed , hundreds of hho/hydrogen devices propagating companies/groups world-wide !
First barrier : storage or 'on demand'
Second barrier: hydrogen works radical,peaces coating need for functional lifetime !

When your system delivers 1 KWh electricity in the 0,01 € range then you have an attractive energy delivery solution !



Good luck in the competition
Sincerely

p.s.: we know that each gasoline engine can become modified to hydrogen engines

         Chevron and BMW research and demonstration
        or as NH3 engines,ammoniak ( here : Mazda)
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 07:22:33 PM

How could you not see this Dingle/Meyer technology is a universal solution when it can be used to fully replace the use of fossil fuels and more? If I make a genset strong enough to power your home and run it off of this technology does or does that not end your dependence on the grid? What if I combine it with an existing battery technology that is already being used to power up people's homes in the case of power outages? The genset takes the place of the grid and all that is needed is a water connection to power up the genset. But the technology goes further as Meyer already had a water heater ready for production that utilized this technology.
Be honest with me, did you take the time to watch the video before making this comment? They said they don't have a solution for air travel and this technology gives air travel a solution too. But the main thing I saw that I didn't like in the video is no one is talking to end the Grid Power distribution system so the end user won't see much change in their lives if they switch tomorrow to wind, solar, and battery technology.


You see this Dingle/Meyer technology is a one stop solution as it goes beyond just being used to replace the use of fossil fuels as it replaces all forms of electric power generation and takes it down to the individual level meaning the individual will be in full control of their own energy needs no more electric bills in the mail no more pain at the pump to fill up their cars with fuel, and it can be used to replace propane/natural gas for cooking, but if your home has an electric oven then your all set to go. I don't see any other FE technology capable of doing all that I mentioned and I haven't listed all the other things this technology can do. I haven't talked about Meyer EPG device as I am not sure if I will make that device as I am not fully comfortable introducing a new molecule into our world that the earth has never dealt with before, but I do know how to go about making the magnetic gas as well as other molecules the earth has never had to deal with before and I am not sure that is such a good idea.


So, I will keep it simple and just use the technology to replace all forms of electric power generation and fossil fuel use and if my thinking is correct doesn't that solve our problems right now? Again I don't know of any other FE technology that is capable of doing all of this which makes it the clear choice for a better future for all of us. This technology is a one stop solution is the point I am trying to make when looking at how the energy is currently being used in the video from fossil fuels, Hydro electric, Geo thermal, Nuclear power plants, and Solar & Wind farms. This one technology will replace them all and more as it is the one stop solution the world needs right now and for the likes of me I don't see how you people who call yourselves educated can't see this?


Anyway that's my rant for today as I will leave you all to your thoughts now as I continue to bring this technology to market.
Take care all,
Edward

I was wrong when I said that solid state is ultimate.

H tech is needed also.

If you can do it Ed, do it.
I wish that you make some money from it,
to cover all those years of research and expenses.
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 09:47:55 PM
silly people here support Chris
but they attack Chris
if Dr AG supplied material
then this supports Chris
supports aboveunity.com members work
how did partzman source this information
who is partzman connected to
why is partzman connected to these people
what does partzman know that he is not sharing with you
why is partzman so active in trying to defame Chris
intelligence of some people is poor to none
just look how much people here attack Chris
Chris is attacked more that anyone else here on the forum
he hardly ever posts here
Stefan does not like you
thats why
we do this for love
we tell truth
we have many supporting us
stupid people
Fritz


Lanca,

Since Stefan is not honoring my request to take me off his forum that was posted and pm'd, I still engage in this ridiculous AU/OU/FE charade!

You and I and a host of other folks here do not believe the words of Chris or Friskie, etc, when they state that they have OU.  So, how do we solve the problem?  Well, one solution might be to investigate the source of Chris' information on "bucking" coils in the first place!  What is the mystery behind all of this?

I invite anyone here who has knowledge about Chris' dealings with Dr. A_____ to come forward so we can go to the source and bypass all the BS.  I know there are those here who know!  We would then know if Dr. A______ really had anything and if Chris was a good steward in passing the info on or if he really has nothing at all.

Chris, Frisket, whoever, claims that those of us who don't have "it" working are stupid and don't know measurements from sickem.  Actually, the evidence points in the opposite direction in this case as no valid measurements are given and there are crossed grounds and who knows what else.

So, who is willing to blow this whole thing open and set the record straight on Chris' antics for these past years?

Pm

PS:  I think I start posting pix of my project cars thru the years-they have at least some electronics in them and are far more interesting than 99% of what Chris and Fritzer post!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 10:09:07 PM
with poor to no intelligence you will never succeed
you need to close your mouth
read, educate, unite, under love and selfless service for your brothers and sisters
help each other succeed like we have
silly people
no intelligence
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 10:11:11 PM

Chris, I dont care with how much grams you powdering your nose,
and playing games for fun.

My wish is that CaptainLoz was making measurements right,
and finally bring that light you are promising for a long time.

That is what is important.
Will see what happens. Time always tells.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 10:15:19 PM
Isnt that your wish too?

Aldo, the accent, yea, you know what I mean.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 16, 2020, 10:28:54 PM
silly people here support Chris
but they attack Chris
if Dr AG supplied material
then this supports Chris
supports aboveunity.com members work
intelligence of some people is poor to none
just look how much people here attack Chris
Chris is attacked more that anyone else here on the forum
he hardly ever posts here
Stefan does not like you
thats why
we do this for love
we tell truth
we have many supporting us
stupid people
Fritz






Fritz, My Friend, Thank You for sharing this very important technology with others! The more people come forward and say it works, the faster we progress with getting this out to the people of the world!

Every single Human Being has the opportunity to learn and build! Will They?

It is cheap and very simple once the base knowledge has been gained!

Thank You My Friend!

I appreciate your effort and very smart approach to your posting! It is very funny to read how quickly you catch others out and correct them!

Well done buddy! The Ball Rolls!

Best wishes, Your Friend,
   Chris
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 16, 2020, 10:30:20 PM

And Chris, you actually like to post here.

You are bored on your forum!

You are member here, it is your forum too.
Why dont you like both forums as yours?
Why to hate one and glory other?
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 10:43:35 PM
thank you Chris
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 16, 2020, 10:45:00 PM
--
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 10:48:17 PM
you appear very angry partzman
are you angry
I hope not
nice scopes
is this your toaster
sorry you make no sense
nothing can be determined
all I see is angry
Fritz

silly people here support Chris
but they attack Chris
if Dr AG supplied material
then this supports Chris
supports aboveunity.com members work
how did partzman source this information
who is partzman connected to
why is partzman connected to these people
what does partzman know that he is not sharing with you
why is partzman so active in trying to defame Chris
intelligence of some people is poor to none
just look how much people here attack Chris
Chris is attacked more that anyone else here on the forum
he hardly ever posts here
Stefan does not like you
thats why
we do this for love
we tell truth
we have many supporting us
stupid people
Fritz

Hey Chris, Friskie, whoever,

Pay attention so now you may learn!  Below are scope shots of a circuit that may interest you as it involves RLE (reduced lenz effect) and SQM (space quanta modulation).  This is an aperiodic operated device which means it is pulsed and energy is built up in certain inductors , then output is drawn off the inductors and the cycle repeats.

The 1st pix show the Pin at the primary of 19.49mw for 12.42us which is an energy level of .242uJ .

The 2nd and 3rd pix show the output and input current of 504.9ma and 499.9ma respectively in LCC which is a 52mH constant current coil.  This current differential equates to an energy level of ((.5049^2)-(.4969^2)*.052/2 = 130.6uJ .

The 3rd and 4th pix show the output and input current of Ls, the 2.52mH secondary, to be 580.6ma and 496.9ma respectively which equates to a differential energy level of ((.5806^2)-(.4969^2))*.00252/2 = 113.6uJ .

The total inductive energy level is 244.2uJ for an apparent COP = 244.2/.242 = 1009 !

Now, why won't you all show these types of measurements?  Oh and BTW, this circuit is just some coils on a core with a little tuning and fiddling, no problem.

And, if you all don't want to left in the dust, you might think about disclosing what you claim!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 16, 2020, 11:17:10 PM
FriskyFritz,I am political one from the last to defend H.Kissinger ! ( Theme : Guatemala)

But when you see the given time data - ..... 1992 ! - and if you could remembering yourself related

' Los Angeles Riots' in the 80'/90' then you probably understand the meaning and contexte !
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 16, 2020, 11:51:08 PM
lancaIV what is someone that has relinquished their individual rights
intelligent is good
try
learn
Fritz

Quote
There’s a plot in this country to enslave every man, woman and child. Before I leave this high and noble office, I intend to expose this plot!
Ref: President John F Kennedy April 27, 1961 Speech
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 17, 2020, 12:51:31 AM
you appear very angry partzman
are you angry
I hope not
nice scopes
is this your toaster
sorry you make no sense
nothing can be determined
all I see is angry
Fritz

Hey Friskie Chris,

Sorry you couldn't understand my "toaster".  I realize it flew past pretty quick but hey, ya got to be more observant!

Am I angry-naw!!!  Frustrated maybe, but you don't want to see me angry!

BTW, CaptainLoz has let the cat out of the bag.  I'll try another replication and if I get it to work, it will plastered all over this forum.

Peace and Love-

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 17, 2020, 12:57:29 AM
if you were smarter
you would realise the cat has always been out of the bag
we have no bag
we have no secrets
we gave you all, everything
https://overunity.com/15395/partnered-output-coils-free-energy/msg433154/#msg433154
https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg545088/#msg545088

see the light you might
make you good maybe
your toast but not your toaster
we know
I pray he has mercy on you
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 17, 2020, 01:27:00 AM

see the light you might
make you good maybe
your toast but not your toaster
we know
I pray he has mercy on you
Fritz


Chris,

Yes it is my toast and toaster and you know nothing of my work.

You said "I pray he has mercy on you" and then you show some demonic looking entity with fire in the background!?  I'm sorry but that just won't work for me as my faith is in a higher power so don't waste your breath!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 17, 2020, 01:31:59 AM
marvel the punisher is not demonic
it is justice
we know
we know
many moles
there is only one true God
one good God
the creator God
he will judge
he cannot be beaten
he wins
we work for him
that shows when we gave feely our work to all
no secrets
no lies
we gave the truth
my name is Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 17, 2020, 03:07:17 AM
I was wrong when I said that solid state is ultimate.

H tech is needed also.

If you can do it Ed, do it.
I wish that you make some money from it,
to cover all those years of research and expenses.


I'm doing the best I can trying to follow the plan I made so many years ago. But as things change so do I adapt and added something new to the plan once I learned how it worked from this guy: https://www.youtube.com/watch?v=fOqqRD1t47Y&ab_channel=DemocracyAtWork
In short I have to start the company and get it going and then pass the company over to the workers and bow out. This gives those that are actually doing the work their true far share of their labor, but if they start to take advantage of people with high prices I can make another company and undercut them.  When this company invest in itself it becomes energy independent thus has no energy cost whatsoever to produce it's product. This allows for the cheapest prices for the products the company will produce as the company will have no energy bills to pay and use that savings to lower the cost of the products to be sold. The goal is to get the technology into the hands of those that need it the most, the poor. This is the way to get this technology into our world in a way that corrects the problem at the ground level. Those that do all the work in the world will be the ones that will be marketed too as the rich really are small in number in comparison to the poor.


It's a sound plan and I am sticking to it, but I reserve the right to alter the plan if I learn something that will make it better. Worker cooperatives is the way to go as this shares the wealth among those that actually do the work and I like this idea.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 08:40:28 AM
Ed,

Hydrogen is not important only as fuel.
Its high burning temperature is good for welding.
Water and H has its secrets, and solid state FE wont kill that area of interest.

Maybe you should not aim only on H as fuel, but make other H products,
which are not fuel related.
That way you can be prepared if solid state FE hits the market and removes the need for fuels as such.

You should think in front.
Anyway, good luck!

Title: Re: RANT CAFFE ASYLUM
Post by: Johan_1955 on September 17, 2020, 08:53:50 AM

I'm doing the best I can trying to follow the plan I made so many years ago. But as things change so do I adapt and added something new to the plan once I learned how it worked from this guy: https://www.youtube.com/watch?v=fOqqRD1t47Y&ab_channel=DemocracyAtWork (https://www.youtube.com/watch?v=fOqqRD1t47Y&ab_channel=DemocracyAtWork)
In short I have to start the company and get it going and then pass the company over to the workers and bow out. This gives those that are actually doing the work their true far share of their labor, but if they start to take advantage of people with high prices I can make another company and undercut them.  When this company invest in itself it becomes energy independent thus has no energy cost whatsoever to produce it's product. This allows for the cheapest prices for the products the company will produce as the company will have no energy bills to pay and use that savings to lower the cost of the products to be sold. The goal is to get the technology into the hands of those that need it the most, the poor. This is the way to get this technology into our world in a way that corrects the problem at the ground level. Those that do all the work in the world will be the ones that will be marketed too as the rich really are small in number in comparison to the poor.


It's a sound plan and I am sticking to it, but I reserve the right to alter the plan if I learn something that will make it better. Worker cooperatives is the way to go as this shares the wealth among those that actually do the work and I like this idea.


Did walk your path, if there would be a serious problem in Nature:


They would stop with: Formula 1, 2, 3, .............


They would stop with: MotoGP, ........................


They would stop with: MotoXGP, ......................


They would stop with: Cars with more than 50Kw


In Germany we still can drive over 300Km/h!?


..................


They would: Plant Trees


They would: Flying with LNG, tested by US and Russia in 1960's


They would: ContainerBoats with LNG or at Least Emulsified Fuels






Dear Ed,


Thanks for being so .............


Regards, Johan



Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 08:54:44 AM

Chris is wrong about CaptainLoz!

Even if CaptainLoz did mistake, nobody will laugh.
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 17, 2020, 09:45:38 AM
Ed,

Hydrogen is not important only as fuel.
Its high burning temperature is good for welding.
Water and H has its secrets, and solid state FE wont kill that area of interest.

Maybe you should not aim only on H as fuel, but make other H products,
which are not fuel related.
That way you can be prepared if solid state FE hits the market and removes the need for fuels as such.

You should think in front.
Anyway, good luck!


If you watch this video you will learn the steps that must be taken and in what order: https://www.youtube.com/watch?v=QfAXbGInwno (https://www.youtube.com/watch?v=QfAXbGInwno)
The top two on the list is Electric power generation and Travel and I should be able to take them both on at once. But I have to start out small and grow the company the old fashion way as being a Negro in America means I can't get the business loans I need from the banks so it is going to take more time as a result. Trust me I have been down that road before where I'd have the loan on the phone and from the short drive to the bank the loan opportunity dried up once they saw the color of my skin. I got tired of dealing with that bank and closed all of my accounts with them and I was with them for over 20 years. This is America and I am kinda use to it now, it doesn't make it right, but I can normally anticipate it now.


"Big things often have small beginnings," so I know I have to start out small and work my way up investing most of what is made right back into the company. What will set this company apart from all the rest is I will not have any energy bills. If I have a fleet of install/service trucks they all will have only water in their tanks for fuel. All the lights, heating/cooling, and other electric loads will be also powered by this technology so no bills for me there either. I will make as much as I can in-house as that will save me a tone of money since all the energy I need will be produced on demand at the point of use. This is a new type of company that won't have any energy bills to pay which gives me an edge over anyone else trying to sell the same products the company produces.


Let me give you all an example of the power of this technology from a perspective you perhaps have never seen or thought of before. Say I choose to start making pizza's. I first go out and see how much the typical pizza company pays for energy per month. I then start my pricing with 50% of the savings of not having to pay for energy to reduce the cost of the company's products. How are the other pizza companies supposed to compete with me? Where are they going to cut cost to compete, from their employees, by getting substandard cooking materials or ingredients? I will steal their employees if I put 25% of what I didn't have to pay for energy into paying my employees better than they pay theirs. With the remaining 25% I reinvest it into the company thus I turn a profit and do things none of my competitors will be able to do. In short I will put each and every other company out of business. I could do this to any company I want to get into kinda play pin the tail on the donkey with a list of different types of businesses and for the unlucky winner they would be put out of business in short order.


But for me that video is a list of what to get into first as it prioritizes things for me. Trust me when I tell you this, "It helps to have a goal and a plan of attack."
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 17, 2020, 02:52:00 PM
h2Opower,did you ever budgetied from your possible client view,

energy costs before,without waterfuel system use

and later : energy costs less  waterfuel system implementation costs = financial advantage ( + eco advantage)


Look for the "Nearly Zero/Net Zero/Zero energy building'- programs worldwide and the KWh/sqm living area primary energy limitation !

new construction and old buildings energetic renovation to ' ecological low/no carbon standart'

When the house investor would have to pay 10. /20. /30. 000 US$ for lower R-value  house insulation and they can get with waterfuel gensets the same/better ecological results,but for 2.500 to 5000 US$, then by comparison they see their advantage in savings and lower investment risc !

Beside lower heating/cooling costs also an electricity delivering source for kitchen and living comfort appliances !

If not selling possbility you have to explore a " waterfuel system renting/lease"-concept !


First : the experience of ic engines lifetime

           the lifetime from the catalyzer/electrolyzer/reformer
          the lifetime from the electric generator ( bearings,coils,...)
         maintenance/service costs per annum


        waterfuel genset total costs per annum/ per converted KWh

        You went to the bank : budget plan with you ? Not to have an expected skin colour should not be the problem,                   
                                                 but not to have B.I.Z. Basel I,.....,V,.... credit limitation rules this is a problem,
                                         

                                         worst/best case for you,the bank,the client,the estate economy



Sincerely
www.patentauction.com (http://www.patentauction.com)   "fuel from water" , f.e. russian offer from maxhe
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 03:20:38 PM
SPINNING BIFILAR= FREE ENERGY.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 04:31:42 PM

Chris have multiple accounts or alts here on OU.com.

What stops him to do the same on aboveunity.com ?

With multiple alts he can fuel whatever story he wants.

It is not everything what it seems.

It is performance and magic on the stage.
People see what is presented to them to see.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 04:34:27 PM
SPINNING BIFILAR= FREE ENERGY.

Bifilar has its secrets, doesnt it?
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 17, 2020, 04:35:36 PM
Whatsit


Nothing but gratitude and respect for Captainloz ...his courage to show measurements will inspire !
Chet K
PS to Lanca
 Here there is no machinery investment ...no startup costs...today [when the captain finishes] with some feet of wire.. bits and pieces a few minutes of time !
lives can change...our world can change...two persons stand in a field and call the power to them...autonomous of the grid  !

as Chris has written many times I personally am one of the dumbest here.."his words" .. [although I can barely write but I speak the same language ?
hard for me to learn with no measuring ...but easy when a man like Captain takes the time to show the measurements ..and now I will be able [and many here] to teach others...imagine how hard it is for those who do not understand the language or no equipment [EDIT I Have no real electronic test equipment ??
or the almost 1 billion who have no reading or writing skills ?
a true teacher takes the time to put the hand out to the lowest denominator..as then he knows he gets everybody...
thank you captain !!







Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 04:41:20 PM

I am talking too much, but I agree with you Chet.

It will be good that someone finally bring the light into this world.

Hope that is CaptainLoz.

I hope.
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 17, 2020, 05:16:45 PM
Chet,shall/have I to write to h2Opower : no machine investment costs,no start-up investment need !?
Each member here can have the similar/same target,but will try it by his own way,alone or cooperative !

Chet,for you,to think about : JP2007028879 Masami Uchiyama

1x nichrome coil,2x,3x,Xx,...... Mono-/Bi-/Tri-/Multifiliar coil arrangement

For fixed voltage,each Ampere his own coil !


Only motor,or also transformer couple !?

Has 'Nickel' in combination some secrets ?
adgex.ru Nickel-battery 25000 ? DOD charge cycles battery
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 05:26:10 PM
CHRIS IS LIKE THE BORG.,,WE WILL ASSIMILATE YOU, RESISTANCE IS FUTILE. I SERIOUS LOVE
STAR TREX VOVAGER.
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 05:28:39 PM
I CAN FEEL IN MY TAIL BONES ,WE ARE NEARLY AT THE VERGE OF
THE GREATEST DISCOVERY MAN HAS EVER INVENTED.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 05:29:08 PM
CHRIS IS LIKE THE BORG.,,WE WILL ASSIMILATE YOU, RESISTANCE IS FUTILE. I SERIOUS LOVE
STAR TREX VOVAGER.

You are not far away.
It needs some planning, but yes.

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 05:36:43 PM
I CAN FEEL IN MY TAIL BONES ,WE ARE NEARLY AT THE VERGE OF
THE GREATEST DISCOVERY MAN HAS EVER INVENTED.

And if it does?

What we will do next Seychelles?
I mean if FE is found, what is the next?

Are we all going to just to stick around or what?
Ideas?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 05:38:04 PM

And Star Trek is awesome!
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 17, 2020, 05:41:17 PM
h2Opower,did you ever budgetied from your possible client view,

energy costs before,without waterfuel system use

and later : energy costs less  waterfuel system implementation costs = financial advantage ( + eco advantage)


Look for the "Nearly Zero/Net Zero/Zero energy building'- programs worldwide and the KWh/sqm living area primary energy limitation !

new construction and old buildings energetic renovation to ' ecological low/no carbon standart'

When the house investor would have to pay 10. /20. /30. 000 US$ for lower R-value  house insulation and they can get with waterfuel gensets the same/better ecological results,but for 2.500 to 5000 US$, then by comparison they see their advantage in savings and lower investment risc !

Beside lower heating/cooling costs also an electricity delivering source for kitchen and living comfort appliances !

If not selling possbility you have to explore a " waterfuel system renting/lease"-concept !


First : the experience of ic engines lifetime

           the lifetime from the catalyzer/electrolyzer/reformer
          the lifetime from the electric generator ( bearings,coils,...)
         maintenance/service costs per annum


        waterfuel genset total costs per annum/ per converted KWh

        You went to the bank : budget plan with you ? Not to have an expected skin colour should not be the problem,                   
                                                 but not to have B.I.Z. Basel I,.....,V,.... credit limitation rules this is a problem,
                                         

                                         worst/best case for you,the bank,the client,the estate economy



Sincerely
www.patentauction.com (http://www.patentauction.com)   "fuel from water" , f.e. russian offer from maxhe


I'm just going to talk about the racism at the bank I use to bank at. After a lengthy phone call, going over all financials, we agree on the loan type and amount and all I had to do was come in and sign the paperwork. When I got to the bank and they saw me I wasn't even offered a seat and just immediately shown the door. This happened several times at this bank and I just got tired of it all. Why should I put my money in a place that treats me so poorly? I think the bank is almost black free now as I am not the only one they did this to.


America was founded on racism and it's laws and very constitution uphold the practice, even it's national anthem is a celebration of their forefathers putting down my forefathers fighting for their freedom. Christianity in all of it's many forms is a racist organization and this nation is a Christian nation is it not? It's 13th Amendment to the constitution makes it very clear slavery never ended in this country as all that really took place was the practice was put under new ownership as it's now owned by the States and Federal Government.


Part of waking up to the truth is recognizing these things for what they are as it is what it is. The first time I left the USA I noticed that I was being mistreated in America but didn't know it because for me that's the way things had always been so how could I see it unless I left the USA? When I would go into a store shopping outside of the USA I would be greeted at the door and ask, "How may we help you?" in the USA I was use to having someone follow me around making sure I didn't steal anything and to get help I had to chase someone down most of the time, but again for me before I left that was normal.


You see the propaganda they push does wear off if you aren't constantly bombarded with it on a daily basis and it took about two months for it to fully wear off of me. Once my eyes were opened there was no unlearning what I saw. Seeing America from the outside when you lived in it your whole life is an eye opener.


My father and I went to see "Malcolm X" and the racist movie theater stole from Spike Lee as my father ask me to look at the ticket and when I did I saw it was not for the movie we were about to see. And I asked the person why didn't the ticket say what we paid for and without skipping a beat they told me, "Oh, it's okay you can still go in and watch the movie."


Now they are making a sport out of shooting and killing us in the streets and when they Lynch us now those Lynchings are immediately called suicides. America is simply not a good place to be a Negro.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 17, 2020, 05:44:16 PM
Lanca

I am not Not referring to Ed's HHO tech sorry I should have posted Vid
https://www.youtube.com/watch?v=WeYB_-_dhhY (https://www.youtube.com/watch?v=WeYB_-_dhhY)
as written here many times in this thread [about vid subject] 10 minutes to see success... few pieces and wire
no matter how small the output...a miracle for the world to build on [measured more out than in].
Whatisit...you want to know what to do...read mission statement here.
not going anywhere ...hundreds of builders to contact and spread the word..TEACH ten minute class all day every day...every language etc etc
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 05:48:28 PM
LancaI am not Not referring to Ed's HHO tech
sorry I should have posted Vid
https://www.youtube.com/watch?v=WeYB_-_dhhY
as written here many times in this thread [about vid subject] 10 minutes to see success few pieces and wire
no matter how small the output...a miracle for the world to build on.
Whatisit...you want to know what to do...read mission statement here.
not going anywhere ...hundreds to contact and spread the word..TEACH ten minute class all day every day...every language etc etc

Will do that, you know that.
It is not questionable at all.

Right!
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 05:52:00 PM
SO IF I ASK YOU ALL THIS MILLION DOLLARS QUESTION. WHAT IS THE GREATEST PROBLEM HUMANITY
HAS FACED , IS FACING AND WILL ALWAYS BE FACING.? I WILL GIVE FREE RESISDENCE FOR AS LONG
AS YOU PAID THE UTILYIES,HERE ON PRASLIN SEYCHELLES IF ANYBODY WILL GIVE ME THE RIGHT ANSWER.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 17, 2020, 06:14:48 PM
Edit

Ed How to start... ?... a dialogue...more ideas ..,solutions  ?

Seychelles

can you make multiple choice ?
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 17, 2020, 07:46:43 PM
H2Opower
Quote
I'm just going to talk about the racism at the bank I use to bank at. After a lengthy phone call, going over all financials, we agree on the loan type and amount and all I had to do was come in and sign the paperwork. When I got to the bank and they saw me I wasn't even offered a seat and just immediately shown the door. This happened several times at this bank and I just got tired of it all. Why should I put my money in a place that treats me so poorly? I think the bank is almost black free now as I am not the only one they did this to.

It's bs any way we look at it.

When I was much younger and started general contracting the banks wouldn't give me the time of day. However after a few years in business they couldn't offer me enough money or a bigger line of credit. Rule #1, banks, corporations and politicians are not our friends and they all want something from us.

Quote
America was founded on racism and it's laws and very constitution uphold the practice, even it's national anthem is a celebration of their forefathers putting down my forefathers fighting for their freedom. Christianity in all of it's many forms is a racist organization and this nation is a Christian nation is it not? It's 13th Amendment to the constitution makes it very clear slavery never ended in this country as all that really took place was the practice was put under new ownership as it's now owned by the States and Federal Government.

Here in Canada the majority agree with you and what's going on down there is bs. I never could quite understand it because my measure of a man was always how they conduct themselves, what they know and what they have done. In this respect donny trump and many of his wealthy friends are probably inferior to you. They inherited there wealth and screwed over everyone around them to get where they are. You take that away and there just another used car salesman peddling snake oil, in my opinion.

There is an upside, they will never be truly happy but we can. So while there doing there worst trying to screw everyone over we can do better. We can do what we feel is right and work hard to achieve it despite them. In fact some of the best and happiest people I have ever met had little while the worst had much. What is a life without happiness and contentment?, that's not a good life in my opinion.

Have you noticed that?, some of the best people generally have little but tend to have a good marriage, good kids, good friends and time to enjoy them. As such I don't envy the wealthy, I feel sorry for them because they are the slaves to there own false ideals they cannot escape. They are the ones who are desperate and trapped not us, we can basically do what we want within reason... that is freedom.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 08:29:47 PM
NO RAMSET BECAUSE YOU HAVE BEEN GIVEN LIFE YOU OUGHT TO KNOW THE ANSWER.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 17, 2020, 08:43:25 PM
SO IF I ASK YOU ALL THIS MILLION DOLLARS QUESTION. WHAT IS THE GREATEST PROBLEM HUMANITY
HAS FACED , IS FACING AND WILL ALWAYS BE FACING.? I WILL GIVE FREE RESISDENCE FOR AS LONG
AS YOU PAID THE UTILYIES,HERE ON PRASLIN SEYCHELLES IF ANYBODY WILL GIVE ME THE RIGHT ANSWER.

Sin!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 08:46:20 PM
THE ANSWER IS WE DO NOT KNOW OUR TRUE PURPOSE OF OUR EXISTENCE.
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 17, 2020, 08:48:57 PM
AND THERE IS THREE PERSONS IN EACH HUMAN CONTRACT OF LIFE, PLEASE LIST THEM.
THERE IS FOUR REALLY AND ONE IS THE GOVERNMENT OF WHERE YOU RESIDE.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 17, 2020, 09:13:33 PM
I like Partzman's answer ...generic to geography and other stipulations]but a good conversation starter towards an answer IMO
is this matriarch... patriarch etc...or an entire new perspective/belief system ?
hows the fishing there...do you ever let any go ??
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 17, 2020, 09:48:33 PM
SO IF I ASK YOU ALL THIS MILLION DOLLARS QUESTION. WHAT IS THE GREATEST PROBLEM HUMANITY
HAS FACED , IS FACING AND WILL ALWAYS BE FACING.? I WILL GIVE FREE RESISDENCE FOR AS LONG
AS YOU PAID THE UTILYIES,HERE ON PRASLIN SEYCHELLES IF ANYBODY WILL GIVE ME THE RIGHT ANSWER.

100$ bill. Never enough of those.
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 17, 2020, 11:18:35 PM
WhatIsIT,if you want to earn 100$ as inventor this means ,by 5% licence fee/royalty  quote and 500% margin for the organisation,
                                     12 000 $ ,VAT-free, sales

So 1 200 000 $ sales are giving net 10 000 $ , for some 3rd world inventors sufficient as annual salary !

But there are many 1 $/day habitants in the 3rd world : 1 200 000 $/ 365 $ ~ satisfying 3287 consumers
by all their daily im-/material ware consume

As worker in the G7 countries you get often per annum net/liquid loans which are several times higher than most inventors their earnings !
For simple handwork - less brain work !

Workers have their Unions and functionaries for worker power demonstration !
Inventors often have to battle for their applied and granted right/s,costly  !

This bill/note is an artificial good,but behind is macroeconomic exploration ,il-/legal movements included !

Sincerely

p.s. : I do not think that fishermens go fishing with 100 $ bills,fish likes more delicious fresh and living worms         and the garden does not grow by bills/notes,try it at first with water and humus
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 17, 2020, 11:30:34 PM
I'm not upset at anyone really just don't like people putting their two cents in a situation they themselves have never been through. I'm getting old now and have been through a lot here in the US so much that I am planning on leaving her for good once I can afford to do so as the only way I can have a life of true safety and a better life is for me to leave this place. But I have a family that I will be taking with me so I have to save up for that.


You see all of this is very close to home for me as this is my cousin they, the police, gunned down right in the city where I live. The one thing Trump has done is made it okay to show their true colors as Mr. Trump has got their backs as he pardons them. So, basically all that was hidden is now back out in the light of day for all to see, but people feel that we are making these things up as they just don't want to face reality or care enough to actually listen to what we say is our experience.


Like I said I am getting old now and as such have seen a lot in my lifetime having actually lives through the 60's & 70's. Even when I first got out of the military this racism hit me smack dead in the face when I was looking for a apartment for my family. My wife not being black didn't catch it, but I had called on the phone looking at some apartments and was told they have several units to us to look at. Once my wife and I got there all of the sudden they were all booked up and had no units available. This is how they treated a Veteran just being medically discharged from the military as again this happened several times in my city to us. Nearing the end of our search my wife started to finally catch on to what was actually happening to us.


Racism is fully ingrained in the American way of life so much so that I now realize it's always going to be this way for as long as America stands as it was born this way. But it would seem that now it's judgement time for America. Will I be able to get out before the judgements come and take America the great out, not sure? But the creator of all things is now starting his judgements upon this wicked nation and he is doing so with a broad sword. There is a warning in the scriptures to come out from among them or suffer in their plagues and I am very much trying to heed those warnings.


So, Chet, Chris, Onemind, and whomever else know that when my people speak of our experiences you should just sit back and take the time to listen. Here is a short video that shows those that hate and/or fear us know what's going on: https://www.youtube.com/watch?v=xUlqTNwm-mk&ab_channel=AlyssaFoster


The creator judges us for the sins of our forefathers as that is what happened to my people as the curses of Deuteronomy came down upon my people so take us as an example that the creator means business. And now it would seem it's their turn to be judged by him for the sins of their forefathers. Trust me when I tell you this no one can save you or get you out of it you just have to survive it as his judgements are carried out just like we had to do.



Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 17, 2020, 11:42:19 PM
h2Opower,I can try to understand your position !
But give your estate and political situation a ranking !
Compare it : www.amnesty.org Mozambique , ' the soldiers and the woman '- video
Here not racism ,but master man and servant woman,beside religion conflict and disemployment
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 18, 2020, 03:07:32 AM
h2Opower,I can try to understand your position !
But give your estate and political situation a ranking !
Compare it : www.amnesty.org (http://www.amnesty.org) Mozambique , ' the soldiers and the woman '- video
Here not racism ,but master man and servant woman,beside religion conflict and disemployment


"But give your estate and political situation a ranking!" What on earth do you mean by this? On July 15th, 2020 my cousin was shot dead by the police with his hands in the air. He was complying with all commands and not posing any type of threat to the officers other than the color of his skin I guess, and you want me to somehow measure this loss with Mozambique?! Tell me you are joking?! Lie if you have to!
Have you ever had a gun pointed in your face by those you pay to serve and protect you? I have. Have you ever lost a love one by those you pay to protect and serve your community? I have. Have you ever went to a Job interview and have the interviewer call out your name while shaking someone else's hand thinking it was you saying has herd so much about you and couldn't wait to meet you only to then turn to you and tell you right to your face that the position is filled after the person he was shacking hands with told him he wasn't you? I have. Have you ever had people hurling bricks at you yelling racial slurs as you and a friend were simply walking down the street? I have.
I have had to put up with a lot from the seed of Esau and always I seem to turn the other cheek. I can go on and on with examples like this of people dropping my food on the floor and then serving it to us, and so much more, but why should I? It would take years for me to mention everything that I have had to endure while living in the US for over half a century.


I guess this is your way to try and tell me it isn't all that bad just look at these folks here, yes? Why do I have to measure my pain and suffering and what kind of scale would that be on anyways?
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 18, 2020, 05:40:55 AM
H20power
Quote
I'm not upset at anyone really just don't like people putting their two cents in a situation they themselves have never been through. I'm getting old now and have been through a lot here in the US so much that I am planning on leaving her for good once I can afford to do so as the only way I can have a life of true safety and a better life is for me to leave this place. But I have a family that I will be taking with me so I have to save up for that.

It begs the question... why would you continue to remain in a place where your abused when there is a whole world of other places where your not?. What's holding you back?, here in Canada we are somewhat unpatriotic or nationalist unlike the U.S. and we could live anywhere and we choose. Many people I know don't retire in Canada, they find some place better to retire where it's warmer and our dollar buy's more. I could live like a king on what I earn somewhere else so why live where we do?. So this patriotism thing is for suckers in my opinion because there is a whole world of better more affordable places we could live. 

Globalism, move to the place we are most appreciated and rewarded for our knowledge and skills. Versus nationalism which is a lesson in failing to rise to our true potential because it's basically communism... it's bs.

There is a whole world just waiting for someone like you so why tolerate the shit and abuse of where your at?. The world is a very big place so why not move somewhere else... that's on you to determine why?.

It's bs because I am Canadian but could be American or any other god damn nationality which serves my own interests if I chose. So I am not an American?, a couple grand, a simple test and I am your supposedly your equal so what does that prove exactly, nothing. I could do the same thing in most countries so what does that prove exactly, nothing. Nationality is nothing other than a predisposition to some generally misguided set of beliefs designed to manipulate us as individuals in my opinion.

Think of it this way, so if we eventually populate the moon and mars should we think less of you because of the pigment of your skin or than your not Lunar or Martian?. Once we move beyond the Earth how should I judge you?. Your not Lunar or white, not Martian or white, not biomechanically enhanced, not biologically manipulated or some technologically integrated psedo-mechanism so what are you exactly?. I mean, I could devise any number of ways to segregate people but what would that prove... nothing.

So yes there may be some superficial and divisive reasons a racist fuck tard like donny trump and friends could devise to divide us however we are more alike than we ever were different.

Best Regards
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 18, 2020, 11:56:11 AM
How structural simple can become a FE concept ?!
Reversible Thermoelectric Converter

US5356484 US patent office granted and as  EP0634055 European patent office granted

2020 now open source ,licence free
No rare elements in use

3d print-able ,roll-to-roll

Tect,walls cover,...
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 18, 2020, 12:05:32 PM
h2Opower :
Paradies to Hell +100 to -100 ranking
With climate changes and the consequences and growing population number the " social stress" will also grow strong,
forced by automatization and work places digital-/virtual-ization !
2100 forecast : 9 billions habitants
 by technical self-learning robotic potential :  50% average disemployment quote

The global 'lock-down' shows us : no/ essential ,no /existence relevant


Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 18, 2020, 02:45:59 PM
Lanca
Psst
 ,.your thermionic thingy
http://www.rexresearch.com/yater/5470.htm (http://www.rexresearch.com/yater/5470.htm)
do you have a section for this [ambient or heat/cold Whatsit harvesting?
  and 3D printing info you mention ?
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 18, 2020, 06:48:18 PM
marvel the punisher is not demonic
it is justice

What??  A fictional character based on Marvel comics is who serves justice in your opinion?  Are you a juvenile sitting in the basement watching cartoons all day?

Quote
we know
we know

Just exactly what is it that you "know"?

Quote
many moles

How can you have moles when you state below you have 'no secrets'?

Quote
there is only one true God
one good God
the creator God
he will judge
he cannot be beaten
he wins
we work for him
that shows when we gave feely our work to all
no secrets
no lies
we gave the truth
my name is Fritz

If the above is really true as you state, then you and Chris will have no problem with what I am about to propose.  I will do a build on this thread of my version of your AU device and then Chris, yourself. and anyone else on the "team" will help me solve my problem in that I can get no higher than ~80% COP!  I will do all the measurements to your approval but you must provide the changes necessary to reach AU as many of your people have claimed.

Now, let's see some substance behind all those no secrets, no lies, etc statements coming from you guys. 

What say ye?

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: h20power on September 18, 2020, 08:17:42 PM
H20power
It begs the question... why would you continue to remain in a place where your abused when there is a whole world of other places where your not?. What's holding you back?, here in Canada we are somewhat unpatriotic or nationalist unlike the U.S. and we could live anywhere and we choose. Many people I know don't retire in Canada, they find some place better to retire where it's warmer and our dollar buy's more. I could live like a king on what I earn somewhere else so why live where we do?. So this patriotism thing is for suckers in my opinion because there is a whole world of better more affordable places we could live. 

Globalism, move to the place we are most appreciated and rewarded for our knowledge and skills. Versus nationalism which is a lesson in failing to rise to our true potential because it's basically communism... it's bs.

There is a whole world just waiting for someone like you so why tolerate the shit and abuse of where your at?. The world is a very big place so why not move somewhere else... that's on you to determine why?.

It's bs because I am Canadian but could be American or any other god damn nationality which serves my own interests if I chose. So I am not an American?, a couple grand, a simple test and I am your supposedly your equal so what does that prove exactly, nothing. I could do the same thing in most countries so what does that prove exactly, nothing. Nationality is nothing other than a predisposition to some generally misguided set of beliefs designed to manipulate us as individuals in my opinion.

Think of it this way, so if we eventually populate the moon and mars should we think less of you because of the pigment of your skin or than your not Lunar or Martian?. Once we move beyond the Earth how should I judge you?. Your not Lunar or white, not Martian or white, not biomechanically enhanced, not biologically manipulated or some technologically integrated psedo-mechanism so what are you exactly?. I mean, I could devise any number of ways to segregate people but what would that prove... nothing.

So yes there may be some superficial and divisive reasons a racist fuck tard like donny trump and friends could devise to divide us however we are more alike than we ever were different.

Best Regards


You know, sometimes I don't even know why I type things out on this forums as no one ever takes the time to actually read it? I already went over the planned move out of the US and trust me I will not be coming to Canada as I am well aware of how that country is right now stealing the land from the Indigos people there, sure it never really makes the news as a kind of out of sight out of mind approach, but I know about it already. Sure the system is a lot better than the US system due to Medicare for All but it's still there just under the surface. Plus I don't like the cold all that much. I have been to Canada and it's nice and all but as I said I don't like the cold so I am planning on moving to a place that is warm year round.
As I stated I have a family to be moved with me and I am currently saving for this move. They have their passports already but I just need to save more for the move as the shipping containers total cost is around $7k per container. I have to look into schools that my children will be going too and make sure the place I choose isn't too far away from a good hospital. To move my business is estimated to cost around $350k though I think I found a way around a lot of that cost. It's not easy to just pick up and move to a brand new country.
Plus that Hydrogen fuel Canada guy has warned me not to show my face in Canada due to me wanting to use this technology to uplift the quality of life for my people whom have been left behind by the western world on purpose and/or by design so that they can get at the resources they need cheaply. So, I already have a known enemy in Canada whom I would not be able to pick out of a line up but where I am going he'd stick out like a sore thumb. I'm not saying this guy speaks for all Canadians but the threat he poses is real so why risk it?


All the places I am looking into spending the rest of my days in are very welcoming to my people in general and it is said that these places are the fastest growing economies with plenty of opportunities for someone like me to thrive in. Trust me I am doing my homework as a move like this isn't to be rushed into. I have had my fill of America as Reparations will never come for the wrongs they have done to my people as in their view they have done no wrong to us.


In America there really is no upward mobility unless one sells their soul which is something I will never do. This upcoming Great Depression is going to make the last one look like a walk in the park and most of these people have never had to deal with not eating for a couple of days and they have guns and are already crossing State lines to kill people for political reasons so what happens when they need to put food on the table?


Anyway, I wouldn't have had to type any of this if you had just read my comments stating I am planning on leaving the USA for good.
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 19, 2020, 12:35:23 AM
Quote from: EMJunkie on September 18, 2020, 10:28:33 PM


    Partzman, what is this rubbish and why do you post this sort of thing here on this thread?

    You use very specifically the term: "my version", thats wrong, you should have said I will build: "Chris's Version". We see, We know, do I trust you, not yet Partzman. Trust is earned over time! Do your darndest, but I already know what your Result will be!

       1: Those that Build a Symmetrical Transformer get: COP = 0.8 - 0.9 - Nothing new here! No Science that's not already well known and observable!
       2: Those that Build an Asymmetrical Transformer, or Partnered Output Coils can get: COP > 1.0 - With a little fiddling and understanding, really not hard!


    It is so easy to fail when one wants to! Or if the person behind the wheel cant see the road!

    This is pointless, nonsense! Not useful to a single Human Being!

    This is a Builders Thread, not a Complainers Thread!

    Best wishes, stay safe and well in these Dire Times,
       Chris Sykes


Chris,

You know I am a builder and by now you know that I can not get a version of your device to work along with others.  So, let's build your version!  Are you saying that I am so blind and stupid that I will not understand your instructions?  I have built a lot of transformers and have asymmetrical transformer designs but for some reason I am not able to get yours to work!

This is a builders thread correct? I am a builder and I am requesting help.  What is the problem with you in denying the help that I'm asking for.  Simply show me the error of my ways.  I will build the device to your specifications and will make measurements to your specifications.  Is this not what you want that is, to let everyone know that your device works?

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 19, 2020, 01:21:52 AM

Chris, 

I am sure you read though Partzman's thread at OUR when it was open for some months 
and you can also find his devices here on this forum if you search for it.

Yes, he did claim COP > 1 performance for several of his setups but in the end he followed them up 
with measurement mistakes (like Captainlos did) so that the COP > 1 was not correct.

Regarding the Post device, he may have decided Fritz did not deserve it because he has been ridiculing him
from the start he appeared in the Rant thread, this is my best guess why he removed it.

If you do not want to help him that speak volumes.
 
Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 19, 2020, 01:33:10 AM



Gyula, I do not trust you either. For the same reasons I do not trust Partzman!

Please refrain from ever posting on my Threads, ever again!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
 


I do not care.
EDIT  And this is mutual, I do not trust you either.
Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 19, 2020, 02:26:30 AM
Quote from: EMJunkie on Today at 12:39:36 AM

    Why do you chase after me with such Vigor? When you have your Own Amazing machines, the Post, that you quickly remove all contents from, that my friend Fritz quoted here?

    You make massive claims of your own amazing machines, but yet, you are here hounding me for mine? WHY?

    You ooze of desperation in your posts! Why?

    Why are you so extremely desperate to approach me and get MY Work? When you make wild claims of your own? Then, you yourself are not prepared to back up your own claims!

    Behavior is a very odd thing to study! An intriguing thing, but odd!

    I do not trust you Partzman. That's my opinion, if I decide to change this opinion at a later point, then I reserve this right!

    Best wishes, stay safe and well in these Dire Times,
       Chris Sykes



Chris,

I see Gyula has already addressed the issue with my claims.  As he said, I found errors with this and that which reduced most of the work to COP<1.  There is still some possible COPs>1 but the amount is near insignificant.

As to the post I removed that Frisky Fritz referenced, that was all smoke and mirrors, but how is that any different than all the posts you have removed from this thread?  Or other threads in the past?  Whatever answer you give me, I give you!

You ask why I'm dogging you, here is the answer.  I know how difficult it is to achieve true OU.  You come on these forums for years and demean serious researchers with your verbiage and condescending attitude and make claims of OU and self-runners but you don't really show anything outside of your little peer group on your forum.  So, I'm challenging you to come forward and share on THIS forum.

You say you don't trust me and use that for an excuse not to participate.  That is a pretty weak excuse and I'll tell you why I think that.  YOU say, as well as your supporters, that you are open and have shared all and only the dummies like myself can't see the "light".  Well, if you are really that benevolent, then why do you refuse to help me and others like myself? There could be only 2 reason for such a response IMO.

1)  You really don't have anything or-

2)  You have it but don't want to share!

I could go on for hours as to why reason #2) is an absolutely short sighted stupid path to follow but hey, that's up to you and yours.  In due time you will understand.

I think we'll let the readers here form their on opinions on this matter but I will say that I'm disappointed in your lack of cooperation with me!

Pm
Modify message
Title: Re: RANT CAFFE ASYLUM
Post by: Johan_1955 on September 19, 2020, 11:49:48 AM

With climate changes and the consequences



When you stop Spraying tax payed but stupid Chemical Blankets, and so the Earth is getting Cooler and more Natural again!
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 19, 2020, 01:03:30 PM
Johan,YOU worked 'serious' in R&D departments ?
When it is talked about meteorolocal climate change then it is about average 1° Kelvin higher world temperature  in the last 50 years !
With +2 up to +4 ° K higher average temperature in future !
Vegetation is temperature-sensible,specially night-temperature related,inverse plants metabolism behaviour  !
There are changes,between day and night temperature average,between coastal zone and inland,earlier forest zones and now urban !

"It is becoming colder" ~ we are entering in an ' ice-time' and the average world temperature is increasing : !?               
Possible cause the humans are warming up that difference !
Dis-/advantage ?! There are wins and there are losts !

The zonal weather is becoming instable ( related common view and lifetime experience )

Many sun-shine = no rain = funny shiny 365 days holiday zone ! But representing : DESERT
No natural water as rain : artificial watering,tubes and pumps for the water delivery !


Central-Europe : drough in the hotter months : low river water line = no transports
River transport volume now on streets !

Groundwater is lowering its high,reserves are depleting ! Water quality ? Salts/minerals,Nitrit/Nitrat ?!
Water treatment ? Costs !
Hotter nuclear plants cooling water up to no more pumping case : water temperature ! Nuclear plant stop !

France : main electricity source ?
Coal-/Gas/CoGen electricity plants : vapor and process cooling : source ?


Demographics of Africa

Population growth :Uni Groningen numbers

2018 Africa   1321 Mio.   World 7500 Mio.
2100  Africa 4500 Mio.   World 10900 Mio.
World 2100 - World 2018 ~ 100% african population number change

North-,Sahel-,Central- South -Africa ?
Outer-/Inner-continental migration : up to 20% expected !

Climate change is not 1 or 2 or 3° Kelvin relevant ,it is  the consequences relevant !

Plants their productivity : quantity and quality changes !
The consumer will have to pay the difference !

Mister Gore like Mr.Trump will soon die,age related,but their no/not/none politics and behaviour will survive them !
Democrats and Republicans their purse should be wide open for 'Reparations' !

Theory : actually local 800 mm humidity per annum
Change potential practical : locally 800 mm humidity per annum ,
but f.e. as short 50 -100  litre/h rainfall ,STURZREGEN
Ground erosion,each year 1-2 mm less humus-layer,specially higher in hill- zones BODENEROSION

Numerical no change,in reality and costs/losts a huge investment/reparation sum over the time


Science : R & chance & riscs D
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 01:13:53 PM

Magician trick is to maintain mystery!

As long as mystery lives, trick is successful.

Partzman experiment or anyone else would just ruin the magic.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 19, 2020, 01:49:54 PM
What is really happening...??
and why is censorship the answer ?
I do believe there is no real censorship here [ Forum ware saves all posts ?]
Regardless ...it is perhaps good to make a fresh start ...
what should the thread be called [here to mixed up ]?


It is quite apparent now Chris holds humanities less fortunate in contempt
He is much more concerned with his forum


Here the mission statement is self evident


5-10 years he has watched humanity with no real interest
In saving lives ,species ,oceans ,atmosphere etc etc
Mostly
His forum


How can we fix this insanity?
How do the privileged members there be held accountable for their indifference towards the less
Fortunate and neediest?
And the loss to humanity?
They post joke pictures of feasts ...and joke pics of children of color starving
They talk of celebrations. ?(here in this topic)


Too many games ...sadistic games!


How do we fix this ?


Not talking about bannings


A new thread with facts of what is happening (consequences) and what really happened
With coil experiments in that topic


Examples posted and replications posted


The world has needed this tech forever
Chris is not interested in humanity ( paper bag comment now on his topic)


10 years he plays hateful game taunting failures and calling less fortunate dumb
One “How.its done” paragraph he will never write


Nobody here has selfrunning
He has for years and years

Perhaps he fears no longer being needed?
Better to treat members like pets?
10 years of crumb droppings and fingerpointing


Fantasy everlasting forum !


As Fritz writes a few minutes a few dollars
And success ( once you know how)















Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 19, 2020, 03:11:01 PM
Administration needs to replace all deleted posts in that thread, ALL deleted posts, and lock it. And remove EMJunkie's authority to delete any post or edit/change them.
Seeing that happen discourages me, and others, I suspect, from 'waisting' time to post anything on this site if it can so easily disappear.
Sincerely,
bi

https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg550725/#new
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 19, 2020, 03:51:21 PM
Quote from: EMJunkie on Today at 03:29:43 AM

    In nearly 5 months, not a single post of value was made! All Rubbish! Like we are seeing again now!

    Nothing useful!

    Nothing benificial!

    This is not one of your rant café threads! Its a Builders Thread and it is clear, there are no Builders here!

    Best wishes, stay safe and well in these Dire Times,
       Chris Sykes



Chris,

The above statement by you is an absolute lie!  You know there are builders here but this isn't a 'builders' thread.  Never has been, never will be, not really!

What are you hiding?  Did you discover at some point that you had measurement errors and now instead of owning up to that fact, you keep doubling and tripling down to save face?

And this trust thing?  What has trust got to do with open source, freely give, told everything, love, etc, as you state?  Sort of the same logic as Frisky Fritz and the "mole" issue!  How can a 'mole' or 'trust' enter into being a factor if you are really as open as you claim to be?  You don't trust myself and Gyula but why?  That is the question every reader on this forum should ask!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 19, 2020, 03:56:34 PM
Quote from: EMJunkie on Today at 11:09:16 AM
    ...

    It so disappoints me that the Human Race has so many Clowns in the Ranks!

    So many Experts that are totally Stupid!

    So many that can Memorise multitudes of Textbooks but cant figure out their way out of a Paper Bag!

    Humanity needs to fix the Dumb Dumb! Its like a Virus! DumbVirus2020 the new virus!

    Best wishes, stay safe and well in these Dire Times,
       Chris Sykes


Chris,

This is a very expected and typical response from you.  You have repeated this type of nonsense for so long and for so many times that is totally falling on deaf ears.  It is meaningless except it brings to bare your immaturity.

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 04:54:05 PM
It is odd that everyone on aboveunity.com wear ring on left hand.

Or ... ?


Chrys Sykes
https://youtu.be/NRdVlWSLt_Y

CaptainLoz
https://youtu.be/B6X9jQIAVt4

Married, could be. Except if it is not same ring.

Usually, when magic trick is performed, everyone watch the performance,
not the performer.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 05:24:04 PM
Chrys Sykes
https://youtu.be/NRdVlWSLt_Y

CaptainLoz
https://youtu.be/B6X9jQIAVt4

In Chris video, he connect wires wirh left hand,
left handed.

In CaptainLoz video, he is showing everything with left hand,
left handed.

What are the odds that they both are left handed?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 05:42:31 PM

Chris commented CaptainLoz

"You have funny accent, haha!"

Is Chris laughing because of accent?
I did not noticed funny accent of CaptainLoz, I watched video few times.

Or is Chris is laughing to his own modulated voice?

That was the first thing which pointed me to look into this.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 05:46:21 PM
Chrys Sykes
https://youtu.be/NRdVlWSLt_Y

CaptainLoz
https://youtu.be/B6X9jQIAVt4

In both videos Chris and CaptainLoz have similar voices.

CaptainLoz sounds like young boy, but his hands zoomed are hands of 40+ year man.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 05:50:33 PM

CaptainLoz jumpstarted  aboveunity.com,
just the thing Chris needed.

And nobody saw the deception.

Magic!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 06:09:09 PM

CaptainLoz gave Chris glory,

but to maintain magic, nobody else must not perform experiment.

Partzman, you have your answer.

Chris is affraid of you. If you do the experiment, you will ruin the magic.

As Chris said, he already know what your results will be.
Because he knows what will happen.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 06:15:08 PM

Occam's razor.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 19, 2020, 07:21:20 PM
IMO regardless ...explaining what is claimed will be wonderful for future of Humanity .
hoping for the best ! [as well hoping you are wrong Whatsit....


Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 07:47:21 PM

I hope that I am wrong and device is real.

But left handed Chris and lefthanded CaptainLoz are story to tell.
And lots of things easily explained.
Chris is doing his alt thing for years.
On this forum and other forums.

Sometimes, the easiest explanation is right one.

If Chris has device, he already will be making industry from it.
That is Chris!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 08:04:10 PM

Researching old posts and data CaptainLoz is from California.

But try to google CaptaiLoz, will bring you to Australia,
country of Chris Sykes.

https://opengovau.com/company/617885373
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 08:07:43 PM

What is behind picture of CaptainLoz?

Yacht!

Chris lives in Oxenford or near, lots of marinas and yachts.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 08:09:36 PM

Chris did not pay attention to small things, almost invisible.

And he claims intelligence, light years away?

Total joke!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 08:18:16 PM

And Partzman is threat to him!

He will never allow Partzman to make any experiment which will prove / disprove his overunity claim.
Simple as that!

Fear!

Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 08:48:28 PM

Chris superior intelligence is taking too long to respond now.

He is in dilemma, what to answer? What lie to serve?

Response time is lie detector.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:02:18 PM





Yet still not a single image posted showing a Build - Disappointing and confirmation of my post!

I posted some 100 Hours or so of video, Images, Circuits, scope shots and multitudes of supporting evidence and still nothing from a single member of ou.com - Disappointing and confirmation of my post!

There are no Builders HERE! Only Rant Café participants with nothing of value to add! - Disappointing and confirmation of my post!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes

Same as you!

Try something smarter.

100 of hours worthless shit videos. An intelligence light years away?
And is not 100 hours anyway. I am not counting your alts, only you.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:05:13 PM

And Chris, you are affraid of Partzman so much!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:10:02 PM

Chris, why you dont demand CaptainLoz,

are you affraid that I will show your picture?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:13:53 PM

What to answer?

Think fast. Time response is lie detector!
Too much time, the bigger lie will be!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:17:26 PM

Still nothing?

You are intelligent superhuman.
It should be peace of cake for you!

You are affraid of Partzman so much that you can not breathe,
and I am pain in your ass so much that you can not stand it!
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:21:19 PM

Are you going to explode soon,
Fritz shit and similar?

Are you crying alone in the dark?

Not yet?

You will, after everyone see your picture.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 19, 2020, 09:26:53 PM

Too much time Chris,

your lie is huge now,

so huge that nobody can digest it.
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 20, 2020, 03:11:40 AM
Chrys Sykes
https://youtu.be/NRdVlWSLt_Y (https://youtu.be/NRdVlWSLt_Y)

CaptainLoz
https://youtu.be/B6X9jQIAVt4 (https://youtu.be/B6X9jQIAVt4)

In both videos Chris and CaptainLoz have similar voices.

CaptainLoz sounds like young boy, but his hands zoomed are hands of 40+ year man.
What a madness.start  from here:
https://youtu.be/X3SuyUvJWnw?t=707 (https://youtu.be/X3SuyUvJWnw?t=707)
I started to watch the video..
The spoken words were good for 10 years old kid,  believing in Pokemon,but not to every  kid.
Gradually the skin on my face was shrinking from the  awkwardly applied.  nonsense hanging upside down,  with belly dressed in some physic terms yelling for help,:
 "let us go from that compilation by pornsense  , .... we need out of here .."
However I don't discourage any kid, as I was kid too.
What is nonsense now,  may lead you to  carrier  of a  scientist in the future 
if you are indeed some kid now.
I understand  that you made an effort and you got  equipment and I do respect you for that very much . I really do.
_____________________
From the other hand, if this was done by some old jerk using a webcam  to show how smart he is - it is still good material for some Russian villagers in the cold Siberia ..  with population 1 per /1000 Square miles and no internet.

Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 20, 2020, 03:12:37 AM
1. Wavelength is expressed in m( meters or its fractional  decrements -(a numerical quantity).
tera ,giga, mega, kilo , hecta, deca, decy, mili, micro, nano, pico, femto, ato.,
At this point it will be: kilo- meters, meters,  milimeters, micro-meters,  and so on.
The same wave expressed in Hz or its.. (Tera, Giga, Mega. kilo , Hz, mHz )
and so on is describing F- frequency but not the wavelength  and can be translated to wavelength as another descriptor, used mostly in communication engineering of antennas and its feeders. 
2. there is no longitudinal wave( mechanical wave) -
in quantum world of waves.
3. there is no mechanical resonance - in
quantum world of waves.
4. there is no interaction of any kind between electromagnetic wave and longitudinal (-mechanical wave)
5.no
Quote
< longitudinal transverse frequency >
ever existed in quantum world.
6. if there would be presence of mechanical resonance  at exactly the same structure having  electromagnetic  resonance than the two  resonances, will never see each other or interact with each other.

But  this is possible to be done:

If
a.  you have  mechanical fork that is in resonance by you knocking it  with the hammer or resonating string of the guitar.
b.  the length of that  mechanical  fork or string of the guitar  acts as electrical resonating circuit( when  electrically   connected) than  due to mechanical vibrations changes) the frequency of this electrical resonance will vary
(differ in , amount, degree)
 so mechanical  resonance will never  interact  with electrical but will disturb  stability of electrical resonance.

- that can be interesting because of  its exotic phenomena.

7. LCR meter is not applicable in active resonance  circuit measurement - you need for that VNA ( Vector Network Analyzer)
 or if not than you need Sweep generator,  spectrum analyzer,  Paper based Smith chart , some calculation, and SWR Meter.   

The  most if not all  of FE device builders  can not explain what energy in their devices ( called Free Energy) comes from?
they build device, expecting  FE results, knowing nothing about energy conversion.

Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 04:36:37 AM
It would be odd that 10 years kid is married.
Wedding ring. Left hand.

How many lefthanded people you know?

What are the odds that both of them are lefthanded?
Both have wedding ring in videos.
Both have similar voice. Different microphone used? So slightly different voice.

I hope.that I am wrong.

Zoom the rings.
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 20, 2020, 04:40:12 AM
:)
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 04:46:35 AM
:)Wesley

Hehe, OK!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 20, 2020, 05:21:09 AM
when intelligent enough to figure out what pumps an Electron (https://en.wikipedia.org/wiki/Electron)
you were told
you did not listen
2013
now still no further
planes cant be real
humans cant fly
right
Fritz


Quote
Translation of video#4 of Akula
https://www.youtube.com/watch?v=ScXhI2hQawc
this is another the latest video of Akula as of today 10-16-2013.More about construction and tuning. He utilizes resonance in resonance phenomena his device  reacts as a pump, creating difference potential to the ground. While ground is trying to balance the difference the pump differential - load is being powered constantly and is  dissipating energy that is   induced in output coil. Output coil is inductively coupled to the differential pump circuit/

начало!  Роман Карноухов
http://www.youtube.com/watch?v=uOopbo...
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 05:31:39 AM

Fritz,

You got all wrong!

We are.all hoping that Chris is right and finally OU is found.
What pisses everyone was that Chris is acting like jerk,
and dont want to show, or lead anyone toward success!

I hope that Partzman will succeed in replication. Not fail!

That does not change the fact that Chris is jerk!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 20, 2020, 05:34:55 AM
Chris gave you everything
you to silly to investigate
others have and succeeded
I have
CaptainLoz
different people, not same
you complain and get no where
others make it work
Chris is not the problem here
you are
we all 100 support Chris
Chris has done what you failed
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 20, 2020, 05:35:42 AM
What are the odds that both of them are lefthanded?

Quote from: WhatIsIt on September 19, 2020, 05:46:21 PMChrys Sykes
https://youtu.be/NRdVlWSLt_Y (https://youtu.be/NRdVlWSLt_Y)

CaptainLoz
https://youtu.be/B6X9jQIAVt4 (https://youtu.be/B6X9jQIAVt4)

In both videos Chris and CaptainLoz have similar voices.


Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 20, 2020, 05:42:36 AM
Sherlock Holmes STIVEP. SAME SAME.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 06:18:46 AM
Hands must have the face.
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 06:23:49 AM
Wesley, you are very good forensic detective.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 20, 2020, 06:31:53 AM
...






I can assure you, CaptainLoz and I are very separate identities! Each living on almost opposite sides of the Planet! I do consider Loz a good Friend!

You really should be more careful publishing personal information! Some might take offense to this!

Loz has achieved what he has, entirely through Hard Work and Understanding. Education, starts at the Start! Loz put the hard work in! Now its Partzman's turn. I hope he is able to reach this level!

All these people deserve Credit! They are the Hero's here! As is Tinman, 2015 (https://overunity.com/15395/partnered-output-coils-free-energy/msg453109/#msg453109), The Shark, Ruslan, Don Smith, Tariel Kapanadze,  all of them before us! They led, on a path, that has been impossible for over 100 Years!

All these machines work on the same basic principal! Many roads lead to Rome! The Approach might be slightly different but the result is the same! Exactly!

Right now, we are at the very start, so if you want to join this effort, Be Part of Something Better, then buckle Up and do your bit for the Race. This is where our Future Starts!

All you have to do is Start the Race, that's all... From Day one, I have said I will help, all for free, don't forget this part!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 06:40:59 AM
...






I can assure you, CaptainLoz and I are very separate identities! Each living on almost opposite sides of the Planet! I do consider Loz a good Friend!

You really should be more careful publishing personal information! Some might take offense to this!

Loz has achieved what he has, entirely through Hard Work and Understanding. Education, starts at the Start! Loz put the hard work in! Now its Partzman's turn. I hope he is able to reach this level!

All these people deserve Credit! They are the Hero's here! As is Tinman, 2015 (https://overunity.com/15395/partnered-output-coils-free-energy/msg453109/#msg453109), The Shark, Ruslan, Don Smith all of them before us! They led, on a path, that has been impossible for over 100 Years!

Right now, we are at the very start, so if you want to join this effort, Be Part of Something Better, then buckle Up and do your bit for the Race. This is where our Future Starts!

All you have to do is Start the Race, that's all... From Day one, I have said I will help, all for free, don't forget this part!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes

I did not publish personal information!

You did, on your web site,

You came to Asylum and posted nice, worm post because you are affraid,
not because you are nice person.

Cheating your own members, treating them like fools!

And you will loose your members if you continue with scam!
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 20, 2020, 06:51:03 AM
WhatIsIt
you make you look stupid with every post
no wonder
no one like you
ever notice Chris never reply to you
silly boy
cry to mother
Fritz
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 20, 2020, 07:32:56 AM

Chris, scamming your own members for your benefit is very low,
even for you.
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 20, 2020, 04:59:10 PM
The building blocks of the universe!



https://www.futurity.org/particle-accelerators-lasers-electrons-2335792/

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 22, 2020, 01:20:47 AM
Whatisit
Quote
What are the odds that both of them are lefthanded?
Quote from: WhatIsIt on September 19, 2020, 05:46:21 PMChrys Sykes
https://youtu.be/NRdVlWSLt_Y
CaptainLoz
https://youtu.be/B6X9jQIAVt4
In both videos Chris and CaptainLoz have similar voices.

I would say...busted.
Stivep did some pretty awesome detective work and it's safe to assume chris is captainloz and god know how many other aliases. Kind of creepy.

I have different usernames in some forums, allcanadian and onepower here when my account was corrupted but at least I'm honest about it. However to be pretending your multiple people to gaslight everyone for profit?...  mental problems.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 22, 2020, 01:43:39 AM
Whatisit
I would say...busted.
Stivep did some pretty awesome detective work and it's safe to assume chris is captainloz and god know how many other aliases. Kind of creepy.

I have different usernames in some forums, allcanadian and onepower here when my account was corrupted but at least I'm honest about it. However to be pretending your multiple people to gaslight everyone for profit?...  mental problems.

Regards






For any mind to make this crazy assumption, is clearly an act of desperation!

You have been told, CaptainLoz and I are not the same people! CaptainLoz and I are Friends!

Our Test Equipment is not even close! Colour of the hair on our arms is very clearly different! CaptainLoz has Dark Hair on his arms, I do not!

Are you people this totally desperate?

Why do you continue to embarrass yourselves with such poor investigation skills?

When you learn the ability to research real facts, use logic and evidence, then maybe, people will take you seriously! At the moment, a 3 year old could do better!

You ooze desperation to draw Crazy, Non Factual, Conclusions! WHY?

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 02:38:12 AM
EMJ,
Are you in contact with CaptainLoz?
Do you know if he has attempted connecting his lamp loads directly to his DC supply to see what they draw?
Just curious...
PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 04:06:18 AM
EMJ.
The posts I made (that you deleted) were in reference to the two
small incandescent lamps that were used in CaptainLoz's video.
Without knowing more about the internals of the LED lamp, I would
not venture to guess what that lamp represents as a load.
That LED lamp is rated for AC operation.  The simplest AC led
lamp circuits use a series capacitor to provide current limiting via reactance.
Although it is possible the LED lamp uses a series resistor for current limiting (as your
Ohm's law assumptions would indicate), that would be very inefficient
and rather unusual/doubtful.  The bulb is also rated as dimmable, and is UL rated,
so likely there is a bit more circuitry in there than a simple cap (or resistor).
In any case, regarding the led lamp, I would not consider any kind of linear
relationship using Ohm's law as if it were a resistive load.

However, the incandescent lamps are indeed resistive, but their resistance
is very non-linear relative to the current through them.  They will even
have some inductance that may be significant at the frequencies used.
However, they have enough thermal mass that connecting them to the
DC supply adjusted for similar brilliance would provide a useful wattage
for comparison to the scope values.
PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 06:55:11 AM
EMJ,

You seem to be avoiding the elephant in the room.  All you
apparently want to discuss is an led lamp I never mentioned (which
likely has an internal AC to DC supply, current regulation and
overtemp protection). 

In the CaptainLoz video I discussed with you he had two small
incandescent lamps being used as a load.  These lamps appear to
be standard 14V panel lamps that typically draw less than 1 watt each.
His scope was reading over 20 watts.  Admittedly, he has since noted an
issue with a probe, but his newer results seem similar, or even higher than
in that video.  Surely it would make sense to do as many crosschecks
as possible to confirm his scope's math is programmed correctly.

It would only take a few minutes to connect the two incandescent lamps to
the DC supply and note their power draw a full brightness.

If that test seems two difficult, perhaps you can ask him for the model number
of those incandescent lamps.
PW
   
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 07:44:57 AM
EMJ,

The scope reading was irrelevant, the two lamps are what was important.

Consider this, in the video I discussed with you, there was a DC power
supply providing 15 watts or so of power to a circuit that was lighting what
was very likely only 2 watts or less of incandescent bulbs.  That is an undeniable
fact that is there for all to see. 

The fact that the scope was indicating that those two small bulbs were incredulously
dissipating over 20 watts should be an obvious indication that the scope's math is
programmed incorrectly.  In fact, it sounds like the scope is taking the RMS or average
of both the voltage and current and multiplying those two averages (or RMS values) which
will provide very inaccurate power indications in the presence of large amounts of reactive current.

Think about it, the CaptainLoz video demonstrated how to use 15-20 watts to light two small panel
lamps (probably equal to a couple watts).  That should make everyone involved wonder how and why
the scope was reading what it was during that time.

In all the years I have watched your POC "productions", I have never seen any results that appeared
to be more than 70-80% efficient.  In the CaptainLoz video, surely you can see that it would have been
much more efficient to drive the two lamps with 2 watts from the supply than to eat up more than
15 watts to do the same...
PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 07:48:12 AM
Deleted double post...
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 08:09:26 AM
EMJ,

14 volt 18xx series panel lamps typically draw 35ma.  As I stated
in the posts you deleted, there are some "specials" that are higher wattage.
However, CaptainLoz seemed to indicate the lamps were not particularly special.

All it would take is a lamp number or a quick connection of the two lamps directly
to the DC supply to determine their wattage.  What's the big deal? Connect the
lamps in series across the supply and if they draw 20 watts at similar brightness,
the debate is over.

However, if they draw way less than that, it is very likely the scope's math
is programmed incorrectly.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 08:17:15 AM
EMJ,

Why do you keep going on about the LED bulb?  You do realize how
most LED lamp circuits work don't you?  Current regulation anyone?

Why do you refuse to discuss the small incandescent panel lamps?

PW

 
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 08:57:40 AM
EMJ,

It seems you should be somewhat familiar with the incandescent panel
lamps being discussed.  I thought I had seen those lamps and sockets
somewhere else and sure enough, you seemed to be using very similar lamps
and sockets in a 2014 video you made. 

 https://www.youtube.com/watch?v=ZhQgch4L5XY

How much power did those lamps draw?

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 22, 2020, 09:19:53 AM
EMJ,

If you believe the bulbs CaptainLoz used in his video and
referred to as "flashlight" bulbs can handle 15 watts each,
then he can easily put the naysayers to rest by putting the two
lamps in series across his  DC supply and show the world
how they can dissipate a total of 30 watts.

As for Brad's gizmo, your rewrite of history is way off base and
the truth is available in threads on this site for all to see.  Poynt99, TK, MarkE,
myself and others actually helped him solidify his measurements
and were becoming convinced he was on to something until
Brad himself unexpectedly pulled the MIB/Mylow card.  This
forum has not been the same since.

So now, who knows...

But that was good for a change of subject anyway...

PW

ADDED:

The bulbs in the video appear to have the E10 screw base. The
bulb you posted an image of has a larger E14 base.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 22, 2020, 09:52:48 AM
Edit post 229 here https://overunity.com/18617/rant-caffe-asylum/225/ (https://overunity.com/18617/rant-caffe-asylum/225/)
selfrunning public acknowledgements]
————————-/////—————-/////———-/////————————————————




While Chris disagrees ( caloric measurements “cited below in text)
I was taught
Incandescent bulbs can be useful measurement tools , bulbs scale linear thru power input over temperature


Take variac and feed bulb ... note temp at different inputs


Captain can check power thru bulbs with thermometer


What is bulb part number ?
I can do this !


ION taught fixed loss to ambient protocol




Also to note , I think I finally understand what selfrunner means at Chris forum
After reading Chris public acknowledgement of selfrunners here with Captainloz name!




They are somehow reusing same energy in battery over and over as David Bowling claims ( yes I do believe David had Anomaly appear in battery)


But ?
Atti2 did help me understand this with his new Vid
Where he gets back 25% to battery


I see he was also on list of public acknowledged self runners
But now he removed it.


So self runners are not yet removed from supply...they are returning parts of input


Or seem to be?


Not looped devices autonomous of ...?


Very good thing to clear up
I truly was unaware .( I believe most thought looped and autonomous )


Not so!


These experimenters need bulb calibration charts for their bulbs


Amazing tool
Yes I know Chris said bulb temp won’t work on his device because
His device also makes cold electricity which cancels or nullify??


This would be another miracle to see IMO


And bring many more builders


Chris  almost 5 million dead from starvation on planet earth since you started this topic
( 5 months)
What is your number for sharing?
Or are they wrong color for you? ( I see Fritz posts pics for joke of starving children of color
While he posts celebration pics of beer fest from Germany ( which you endorse or join in “Big happy thumbs up!!)


This tech is not an Ego game
Our world has suffered greatly the ten years you hide it
And now continue .....


To play games on their graves


Yes I know
You write that Stefan mission statement here is “self righteous cause”


You are not concerned!( actually profoundly obvious)


Please share!!


People and planet are Dying for lack of this tech!

Atti2 vid with 25% return to source (after running load)

https://m.youtube.com/watch?v=jr68vWT5ios (https://m.youtube.com/watch?v=jr68vWT5ios). (Posted with permission)


Yes I ask permission
Unlike Chris who posts Brads “ what ever it is”
With no permission or understanding or explanation


But he also posts all Brads personal info and pics of his house
Endangering his family!!
As taunt and abuse (for years)
And then invites him back As if friends in builder topic


Tinman
Chris’s favorite person to torture!!




Sadistic person ...evident by actions !!


Please share
People are Dying and our planet is suffering while you taunt and play crumb dropping God these last 10 years




Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 22, 2020, 12:29:02 PM
Fact 1
Chrys Sykes and CaptainLoz are same person.
Chris is using alt's to fuel faith of his members and gain new ones.

Fact2
Bucking coils can be reproduced only on Chris web site.
To achieve that person must become member of Chris web site.

Fact3
Chris members gladly pays donations to feel respected on Chris web site,
because they were laughed or rejected on other forums.

Fact4
Chris is psychopath who dont care for anyone.
Chris enjoys to be "great lider" and collecting money from his members,
to keep running that role.
If some of his members change opinion, been called troll and banned.
Real questions are not allowed there.


Dont forget about donate button and become part of SOMETHING better,
whatever that "something" is.
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 22, 2020, 01:08:14 PM
I take an electric drive air/water  heat pump and get an average C.O.P. about 4 !
But based by german EE/PE mix unit (primary energy per electricity unit : older 2,6 to now 1,8) this means :
 4/2,8 = C.O.P. 1,42 and 4/1,8 = C.O.P 2,2

          machine absorption work heat output ,BTU, versus primary energy input coefficient !

Now I converse these BTU by low-temperature heat converter with 50% efficiency for this energy level and coupled to this converter a generator with 90% average to electric energy efficiency I get :

4 x 0,5 x 0,9 = BTU to electric energy conversion 1,8     divided        " newer" 1,8 primary energy drive consume =
So
                                 
                         Grid  electric to electric total conversion efficiency 100% or C.O.P.: 1

But : when I go off-grid and give from the generator electric output the heat pump electric motor consume then I have an off-grid closed circuit efficiency : C.O.P. ( 4 x 0,5 x 0,9 ) - 1 = ≥ 1



Physical electric motor improvement : + 100%  torque/rpm per Watt

Physical electric generator improvement : + 100 % ( Watt per RPM/force)

Technical closed cycle improvement : 400% possible or 4 times better results




To motor input or/and generator output electric dynamic generator :

" or "= up to 4 x 10 times better results  and by condition " and" : up to 4 x 10 x 10 better results

   Electric to electric C.O.P. up to ≥ 400 cascade ,step I,array possibility



The C.O.P. = 4 is right,but also the C.O.P.= 1 is right ! It depends from the definition !

No fake,no lie : point of view !


Sincerely

p.s. : question in bucking coils arrangements : Q-factor,energy storage potential !?   

         this compact pulsed in 10% duty factor/cycle !
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 22, 2020, 01:09:19 PM

What Chris is doing is called:

On Chris web site - friendship and sharing openly.

In real world - SCAM.
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 22, 2020, 03:24:46 PM
Dear Friends :
what was first:  motivation or emotion?
 
Primarily Emotions is what  makes some individuals to act in hope to progress.

reason1:
The need to be important and known and possibly make  some money on it.
example:
https://www.youtube.com/watch?v=yhuBlxLktKE&t=335s (https://www.youtube.com/watch?v=yhuBlxLktKE&t=335s)
in this video
the value is  very amateurish,the mistakes are  noticeable the knowledge is  very basic
But he was really trying to do his best.. and that is very good ,  I'm for it. Thank You.
However  to build  something you need good Concrete Foundation:
 and naming his video channel :
Aboveunity and hyiq Research Channel was a big mistake.
there is no above-unity and hyiq earned bad reputation.
 
__________________________________
reason2: Money paid by dictator based regimes such in Russia.
              Russian government: dictator being 21 years as president fears that FE  collapses his empire and sends him to -
                The Hague, Netherlands : Permanent Court of Arbitration, a permanent 
                superseded by the International Court of Justice International Court of Justice (since 1945)
                for crimes against humanity,

 


________________
If we assume that all of you are somehow having  basic interest in electronics/ electricity
and I give you incentive
than
add.reason.1 -  yes some  individuals  that are absolutely,  dull may become brilliant in given field .
factors: time  and money.

If I give you deal:
add.reason.2
- memorize 3 pages of text for 200 dollars + additional 100 dollars if  you pass simple test from that 3 pages 
  and than you are allowed  to
  memorize another  3 pages of text for another 200 dollars + additional 100 dollars if  you pass simple test
Result : after the week you will do 3 pages per hour instead of 3 pages per day..
base for  my conclusion from above is : consequence. a number, quantity, or value obtained by solving a mathematical problem
._____________________
or If  Some Russian troll factory  pays you for  placing nonsense here
than they pay less but money  is easier.

but than I may do everything to throw you out from here.
_______________________
That is the difference between e.g a Russian troll and curious motivated  thinker here.

Wesley

https://en.wikipedia.org/wiki/List_of_countries_by_English-speaking_population
Title: Re: RANT CAFFE ASYLUM
Post by: captainloz on September 23, 2020, 04:06:08 AM


Hi Guys,


Some of the comments here are pretty vicious. Just so you know I have been a member here for many years. The reason I joined Chris's forum was because he actually helps you figure stuff out. I am no expert but am learning more and more every day, thanks to Chris and other members. I have been very transparent with all my videos. I have made a lot of mistakes that people point out because I leave the comments on on all my videos. I'm commenting here because Itsu asked me to comment about the bulbs I'm using in my latest experiment.  They're just 14Volt .2A radio shack screw in bulbs. I got them at a clearance sale when they were liquidating. Also a MR16 7.5 watt LED Bulb.  I don't know if the bulbs are consuming all the power shown across the resistor, I just know if you take the measurements as you normally would it's showing a gain.  I am not trying to mislead anyone. I'm just sharing my real time results.  Take it or leave it.


And just to be very clear I am not Chris! That's ridiculous.


If you are interested in my latest experiment follow the thread at aboveunity.com. Or just watch my latest videos, I'm not hiding anything.  Sorry guys, I'm not going to be doing two threads I just don't have the time.


Cheers,
Loz





EMJ,

If you believe the bulbs CaptainLoz used in his video and
referred to as "flashlight" bulbs can handle 15 watts each,
then he can easily put the naysayers to rest by putting the two
lamps in series across his  DC supply and show the world
how they can dissipate a total of 30 watts.

As for Brad's gizmo, your rewrite of history is way off base and
the truth is available in threads on this site for all to see.  Poynt99, TK, MarkE,
myself and others actually helped him solidify his measurements
and were becoming convinced he was on to something until
Brad himself unexpectedly pulled the MIB/Mylow card.  This
forum has not been the same since.

So now, who knows...

But that was good for a change of subject anyway...

PW

ADDED:

The bulbs in the video appear to have the E10 screw base. The
bulb you posted an image of has a larger E14 base.
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 04:46:45 AM
CaptainLoz,

Thanks for replying here.  I enjoy your videos, there has been no drama on my part.  Chris or Chet posted your #7 video which I watched.  I commented that when the POC was driving the two small incandescent lamps the scope was indicating something like 20 watts, which I believed was much more than the two lamps could likely dissipate.  I asked Chris if he knew what lamps you used and if unknown, perhaps he could suggest to you that you try driving the lamps directly from your supply to see what the lamps draw from the supply.

The 14volt at .2 amp is more than I guessed, but even at those numbers, that's 2.8 watts each or 5.6 watts for the two, when driven to full brightness.  At the point in the video where these lamps were the driven load connected to the POC, the scope was indicating 20 watts (if I recall correctly), and the DC supply was putting out something like 17 watts.

So, what we see is 17 watts from the supply being used to light a pair of 2.8 watt lamps (5.6 watts for the pair, if driven to full brightness).  It would be more efficient to drive the lamps directly from the DC supply, requiring only 5.6 watts instead of the 17 watts.

The scope was reading 20 watts or so.  It is very unlikely that many watts were being dissipated by the lamps.  That would be very much above their 5.6 watt rating (for the pair) which would make the lamps either very very bright or damage them.  Because of this I questioned whether or not the scope math was programmed correctly. 

Thanks again,
PW 

 




Hi Guys,


Some of the comments here are pretty vicious. Just so you know I have been a member here for many years. The reason I joined Chris's forum was because he actually helps you figure stuff out. I am no expert but am learning more and more every day, thanks to Chris and other members. I have been very transparent with all my videos. I have made a lot of mistakes that people point out because I leave the comments on on all my videos. I'm commenting here because Itsu asked me to comment about the bulbs I'm using in my latest experiment.  They're just 14Volt .2A radio shack screw in bulbs. I got them at a clearance sale when they were liquidating. Also a MR16 7.5 watt LED Bulb.  I don't know if the bulbs are consuming all the power shown across the resistor, I just know if you take the measurements as you normally would it's showing a gain.  I am not trying to mislead anyone. I'm just sharing my real time results.  Take it or leave it.


And just to be very clear I am not Chris! That's ridiculous.


If you are interested in my latest experiment follow the thread at aboveunity.com. Or just watch my latest videos, I'm not hiding anything.  Sorry guys, I'm not going to be doing two threads I just don't have the time.


Cheers,
Loz
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 06:20:21 AM
CaptainLoz,

Again, consider that in video 7, when the the two incandescent lamps were the only load, the DC supply was delivering around 17 watts.  It was taking 17 watts from the supply to light a pair of 2.8 watt light bulbs (a total of 5.6 watts).  Even if the lamps were overdriven by 100%, making them very bright and shifting their color temperature, they would only draw 11.2 watts.  In the video, the lamps did not look overly bright, or necessarily at full brilliance.  So where is the rest of the power from the supply being wasted?

In video 7, I believe the two lamps were connected in series.  I suggest you try connecting that series string of two lamps directly to the DC supply and adjusting the supply output until the lamps are at a brightness similar to what they were in the video (as driven by the POC).  Compare the wattage required from the supply to light the lamps to the 17 watts used by the circuit in the video. 

PW



 



 
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 06:46:47 AM
EMJ,

If the circuit were 100% efficient, the two lamps would have been dissipating 3 times their rated power (17 watts from the supply, each lamp dissipating 8.5 watts, the lamps are rated at 2.8 watts).

The lamps would have been very bright and very white.  The lamps did not appear to be overdriven.  They looked closer to their rated output, if even that.

In video 9, CaptainLoz overdrives one of the incandescent lamps, and it is very obvious.

So again, in video 7, when the two incandescent lamps were connected as a load, it was taking 17 watts from the supply to light a pair of 2.8 watt lamps.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 07:18:42 AM
To all,

It was video number 5 I was referring to, not video 7:

https://www.youtube.com/watch?v=Tk9uSOdj-hE

At about 7:30, the load is the two small incandescent lamps.

(Forgive the confusion, EMJ keeps deleting posts...)

The DC supply is providing 14.8 watts (and 2.25 watts for the driver).

At that point in the video, the circuit is using 17 watts from the supply to light a pair of 2.8 watt lamps (5.6 watts total)

Even if the lamps were overdriven 100%, which they do not appear to be, the circuit would still be very inefficient.

If 17 watts is being used to light a pair of 2.8 watt lamps, where is the remainder of the 17 watts being lost?

PW

Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 23, 2020, 07:19:37 AM
I butted in on EMJunkie's thread where he was discussing Ohm's Law with member picowatt. He, EMJunkie, of course, deleted my posts along with pw's and his own replies. I had copied my posts along with his reply and parting statement. Here is a paste:

EMJunkie writes:

"25V Pk to Pk at one stage didn't we! So the Globe Rating goes out the window doesn't it!

At: 25 Volts

We get: 25^2 / 70 = 8.92857 Watts, Simple Right!

Now, the Globes are in Parallel, ...
So, again for you, I know its hard, but try, you will get it: RT = 1/R1 + 1/R2"

It is incorrect to use peak to peak voltage in a power calculation like that.

Also, the equation for equivalent resistance of two resistors in parallel is incorrect.

Nice to see you address some of these concerns.
bi

________
Reply:

Bis.....,

25 Volts was given as an example. In some scope shots much higher Pk to Pk were seen!

27 x 0.707 = 19.089

But the waveforms are not purely Sine in shape! So and example was given instead, can you manage to deal with an Example?

I truly look at the Electrical Engineering knowledge here and think you guys are in the dark ages, I know my skills are only average, but wow, its not hard to put you all to shame.

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes

_________

EMJunkie,
Using your attachment, you can see the difference.

1/RT = 1/R1 + 1/R2
vs
RT = 1/R1 + 1/R2

What does a peak to peak voltage times 0.707 represent?

Regards,
bi

_______

By EMJunkie:


P.S: It is clear, 9 of 10 people here, cant figure out the life's most simple things! They are clearly simpletons, and have no idea how V, I and R are related to each other! Even when Thermal Drift is involved! Linear and Non-Linear Conditions. Deliberately Dumb! Its just easier to delete the Idiots!

________

And some people can't copy an equation or do arithmetic.

Regards,
bi
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 23, 2020, 12:30:32 PM

CaptainLoz or Chris,

1. It is too bad that nobody outside your web site can not
confirm what you two, or one, are doing.

2. At this point it would be easier to loop the device,
and confirm your overunity than rant around with equations.

But hey, show must go on. Right?
Title: Re: RANT CAFFE ASYLUM
Post by: WhatIsIt on September 23, 2020, 01:54:55 PM
Consider that CaptainLoz and Chris are on opposite side of the world,
reader should expect that their activity staus should be opposite as well?

Well they look similar to me, like they are from same time zone.
They are both from Australia, or should I say they are same person.

CaptainLoz has only 15 posts and his activity status is not so dense as Chris,
but is visible enough to make the point.

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 23, 2020, 03:18:37 PM
A cardboard box and a thermometer...not a big investment

put Device in Box with temp probe ...[put everything in Box [batteries if using for power etc...

run device note temperature ceiling [where it levels off and holds againstlosses to ambient [the reason you use cardboard.. it is "Lossy"  ... looses heat to environment ]
write down temp
Now remove DUT and run same test with common appropriate sized resistor in same box [worlds most efficient use of electricity... heat...all losses contribute to task "heating" write down Temp and compare...[If Device Temp is higher than Common resistor at same input in same ambient...??
nobody has ever done this...BIG NEWS


 
obvious addendum...

ambient temp should be the same for both tests [side by side at same time is nice...if box gets dangerously hot ? use bigger Box or run test in colder ambient.
such small output will not start fire or overheat in not insulated box.



beat the heat of common resistor at same input ...do the happy Dance.
don't beat the resistor...look for issue.
ION taught this "fixed loss to ambient protocol" for all manner of difficult measurements where scopes and probes can be tricked or high frequency,magnetism ...whatever... etc etc ?
super simple and works. [he had his techs use this for quick tests at lab ]
VERY GOOD TOOL FOR THE TOOLBOX OF LOW MONEY EXPERIMENTERSLOOKING TO BUILD.thermometer and cardboard ...[noting time to heat good indicator too.

beat the common resistor [for making heat]the world will really notice.
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 03:34:20 PM
Ramset,

In the past, to measure real power from a complex or high frequency source, a gizmo called a differential thermal wattmeter was used.  Basically, the device under test would drive a resistive load.  A voltage controlled DC power supply was used to drive an identical resistive load.  A thermister was mounted to both resistive loads and a differential amplifier was used to generate an error voltage to control the DC supply's output and maintain both resistive loads at identical temperatures.  The power measurement was then easily determined by the power required from the DC supply.  Electronically, its a fairly simple device.  Most of the accuracy was determined by how well matched the thermal properties of the housing/chimney for the resistive loads was.

Construction and calibration of a fairly accurate version of such a device is not that difficult.  Having a DC power supply with a control voltage input is very helpful.

PW   
Title: Re: RANT CAFFE ASYLUM
Post by: Smudge on September 23, 2020, 04:04:15 PM
Another similar technique when the load is a light bulb (very non-linear resistance) is the light comparison test.  Have two identical light bulbs within two identical enclosures that are side by side.  Each enclosure has a ground-glass panel on one face, and the two glass panels are adjacent.  Light one bulb from the DOT and the other bulb from a DC supply.  Adjust the DC until both bulbs emit the same quantity of light as seen on the glass panels, then accurately measure the DC voltage and current.
Smudge
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 04:11:06 PM
CaptainLoz,

What prompted my initial post to EMJ was with regard to your video #5:

 https://www.youtube.com/watch?v=Tk9uSOdj-hE

At around 7:30 in that video, we see the two incandescent lamps, apparently in series, being used as a load.  At that point, the DC supply is providing a total of around 17 watts.  It does not seem probable that those two incandescent lamps could be dissipating 17 watts, let alone more than that, as indicated by the scope.

Thanks to your reply, we now know that the lamps will draw .2 amps when driven by 14VDC.  Therefore, when driven to their rated brightness, each lamp will dissipate 2.8 watts.  The series connected pair, will therefore dissipate 5.6 watts when connected across 28VDC.

The waveform driving the lamps is not DC, but the thermal mass of the lamps tends to do a good job smoothing/averaging a complex AC waveform driving the lamps. 

I suggested that you connect the two lamps directly to the DC supply and adjust the supply's voltage until the lamps are illuminated as bright as they are at 7:30 in the video and compare the watts drawn from the supply to the watts driving the POC circuit at 7:30 in the video.  Although a judgement as to what is "similarly bright" is rather subjective, such a test will, at the least, provide a ballpark number to compare to the scope reading.

Its a fairly simple test and should not have set off a firestorm of insulting replies from EMJ (which he then deletes).

So, to repeat, in video 5, at around 7:30, we see 17watts from the supply being used to light a pair of 2.8 watt rated incandescent lamps.  Even if the lamps were being overdriven to almost three times their rating, the circuit would be less than unity and way more inefficient than what the scope is indicating.

If the scope math is not set correctly, you could be measuring reactive power circulating in the circuit and not real power driving the load.  Performing a quick test with the two lamps, driven to comparable brightness by the DC supply, would provide an "in the ballpark" verification of the scope's measurements.

PW     

       
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 23, 2020, 04:33:42 PM
CaptainLoz,

Respectively, I would recommend you try what Picowatt has suggested and if you find that his test shows you could not be producing the level of output your scope indicates, I have a suggestion.

Remove all the floating grounds.  These are not necessary due to the inherent isolation provided by the transformer windings.  IOW, place the common ground from your signal generating source on the the same ground connection of your circuitry, on the same ground of your scope and ground each secondary at this same point.  Now take your measurements as let's see what the result is.

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 23, 2020, 04:49:00 PM
Partzman,

A comment to his video #9 suggested he feed two zero to 5 VDC "in phase" 50% duty cycle square waves into the two scope channels for a simulated 25 watts during the square wave on times.

If the scope math is correct, that should read an average of 12.5 watts (25 watts for 50% of the time).  One of the square waves is then phase shifted 180 degrees and the scope should then read close to zero watts.

I think the above is an excellent suggestion as well.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 01:58:48 AM
EMJ,

Apparently you do not grasp the logic of this suggestion.  It is a simple method of verifying that the scope math is programmed and reading correctly.

A function generator is used to simulate a voltage and current signal of known amplitude and duty cycle and fed directly into the two scope channels.

Various amplitudes, waveforms, duty cycles, and phase relationships can be used, but the suggested pair of "in phase", 0-5VDC @50% square waves makes for easy math.

When the pair of square waves are "in phase", the scope should read 12.5 watts (5V X 5A= 25W for 50% of the time = 12.5W).

The phase of one of the square waves is then shifted 180 degrees.  The scope should now read very close to zero watts.  If the scope does not read zero watts, the math is not properly programmed and is not measuring "real power".

Feel free to ask additional questions if you or CaptainLoz do not fully understand this suggestion.

PW

 
Is anyone reading these moronical Assumptions?

50%? last I checked Loz used 35% or less. What is wrong with these people? Cant they get simple figures right?

How many times do you have to be told the simple stuff?

Why do they all rush in, from years of Slumber, to act like children, when we have a measurement that shows something special?

It is obvious to me!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 24, 2020, 02:37:54 AM
--
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 02:49:55 AM
EMJ,

No one is making "wild claims".  I watched the videos.  Nothing in those videos verifies the scope math when measuring complex waveforms with large amounts of reactive power. 

CaptainLoz is measuring a very complex AC waveform that likely has a large reactive current component.

The simple test previously suggested is quick verification that the scope is measuring real power and not VARS or some other weird possibilities that can happen if the math channel is not programmed correctly.

When the two 0-5VDC square waves @50% are in phase, the expected math output would be 12.5 watts (5V X 5A = 25W for 50% of the time = 12.5 watts).

Shifting one of the square waves 180 degrees simulates a current and voltage that are exactly 180 degrees out of phase, so the scope should now read zero watts (5V X 0A = 0W, 0V X 5A = 0W).

This quick verification ensures the scope is reading real power and not VARS or some other weird values that can occur if the math is not programmed correctly.  It would take less time to perform than it took to make this reply.

PW

Some make wild claims: "the math is not properly programmed" on the scope.

Honestly, this is so absolutely stupid to suggest! Desperate, COMPLETELY desperate attempts to sweep this major problem they have away!

TWO Scopes, both A x B Both Calibrated, both tested using Standard DC Methods with Equipment. How do we test our equipment?

Here:
   1: Test the Scope using Known DC Load: https://youtu.be/x17HQCiVHW0
   2: Test Equipment again after Scope Calibration: https://youtu.be/ol-3VZJaqys


DAMN! Some people are silly idiots and have no logic what so ever in their minds! This is the absolute dumbest suggestion I have ever heard! It is IMPOSSIBLE to have the Scope Math wrong, if its been tested under DC Conditions and found to be Correct!

Some, are completely wrong, talking from an uncontrollable hole in the middle their your head. Use commonsense, stop talking RUBBISH! Illogical, nonsensical rubbish! Stop with all the Diabolical Stupid! Tell your uneducated Numptys to go and educate! They make you look even dumber when they come and make dumb idiot Posts!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 03:05:12 AM
EMJ,

I am not making any assumptions.  I am merely pointing out an observation.

In video #5 @ 7:30, the DC power supply is feeding 17 watts into a circuit that is lighting two small incandescent lamps that appear to be series connected.  Thanks to CaptainLoz's response, we know these lamps draw .2 amps at 14VDC, or 2.8 watts, at their rated output.  The series connected pair would therefore draw 5.6 watts when connected across 28VDC. 

The lamps in the video do not appear to be overdriven to any large extent, but even if the pair of lamps were being overdriven by a factor of three times their rating (i.e., 16.8 watts), the circuit would still not be 100% efficient.

It would take very little time to connect the series connected pair of lamps directly to the DC supply to confirm their power draw at similar brightness.

PW

These people, are, automatically basing their assumptions, entirely, on the Oscilloscope readings being incorrect!
...

Logic and Reason does not exist here!


P.S: I will continue Deleting Idiots!
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 03:44:46 AM
EMJ,

You can't be serious.  I think you need to step back and look at this with much less emotional investment. 

A string of pulses is being fed into circuit having both inductive and capacitive reactances, with some apparent tuning using a variable capacitor, and you do not believe there will be a reactive current component flowing in the circuit?

I don't even know how to respond to that.  Hopefully CaptainLoz is a bit smarter and will understand the logic of the suggested square wave test.  The point of the test is to ensure that any current out of phase with the measured voltage is not counted as real power.  Its a very simple test. 

By the way, the square wave used to simulate the current input can be reduced to 500 millivolts if the scope's current input channel is set for use with a 0.1 ohm CSR (as opposed to a 1 ohm CSR). 

If you still don't understand, please feel free to ask...

PW


WHAT ARE YOU SMOKING!!!

Voltage and Current Phase is almost purely IN PHASE! Pure, Real Power! Power Factor of pretty much: 1.0

There is no Reactive Power in there! What are you SMOKING! Do you have any idea how Stupid your post sounds? Man Alive, go and retire or something, you are so far off the mark its not funny!

What Non-Sense you keep writing Picowatt!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: hartiberlin on September 24, 2020, 04:43:33 AM
Hello All,User WhatIsIt (https://overunity.com/pm/f/inbox/l/-1/done/sent/#msg82475)is on moderation, cause he has slandered permanently Chris...
Sorry, I am very busy with other things and can not moderate much... but with the function moderation single users,I can better see, what they post, before the postings go online...
If there is a claim, that someone runs a scam on his own website, I guess there would be comingother users forward, that feel being scammed... so are there any victims yet ??

Regards, Stefan.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 24, 2020, 05:08:23 AM
Hello All,User WhatIsIt (https://overunity.com/pm/f/inbox/l/-1/done/sent/#msg82475)is on moderation, cause he has slandered permanently Chris...
Sorry, I am very busy with other things and can not moderate much... but with the function moderation single users,I can better see, what they post, before the postings go online...
If there is a claim, that someone runs a scam on his own website, I guess there would be comingother users forward, that feel being scammed... so are there any victims yet ??

Regards, Stefan.






Thank You Stefan!

There is no Scam, that was a false accusation! Some kind people, through free will, can make a donation if they wish, to help support the costs of my website, other than that, I receive no financial incentive to do what I am doing. I do not run ads or anything! I do this for Free! I do this for Love!

We have a replication of My Work, CaptainLoz has shared his work publically and we are trying to come to a conclusion. With brand new, calibrated equipment, we can not find an error. Many are trying, as yet unsuccessfully.

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 05:43:19 AM
EMJ,

I would think you would welcome any suggestions, and the opportunity they provide, to silence the naysayers and prove your claims.

What data can we glean from video #5 at around 7:30?

https://www.youtube.com/watch?v=Tk9uSOdj-hE

A DC power supply is feeding a circuit drawing 17 watts of power as indicated by the DC supply.  The load being driven is a series string of two small incandescent lamps that are rated at 14VDC @.2amps.  Therefore, when the series string is connected across 28VDC, the lamps will draw 5.6 watts at their rated brightness.  There is also an oscilloscope connected to measure the power consumed by the load (the two small incandescent lamps) that is indicating that the lamps are consuming 20 watts.

DC supply indicates 17watts
Scope indicates 20 watts
Lamps indicate 5.6 watts

A good researcher would look at those three indications and want to verify, confirm, and sort out those three indications to either find a measurement error or be proudly able to verify the circuit's claimed operation. 

Consider the two incandescent lamps, a good researcher would stand back, look at those indications, and ask themselves "are those two small lamps actually consuming 20 watts as the scope indicates, or even the 17 watts the supply indicates"?  "Can those two small 2.8 watt rated lamps even handle that much power"? 

That researcher would want to connect the series string of two lamps directly to the DC power supply and adjust that DC supply until the lamps lit with similar brightness as observed during the POC test.  That researcher would note the power draw indicated by the DC supply and compare that indication to the 17 watts and 20 watts indicated during the POC test.  A very simple 5 minute test.

If it really does take 20 watts from the DC supply to make the lamps illuminate as bright as they were in the video, congratulations, that confirms the scope readings, and the circuit may indeed be operating above unity.

However, if the lamps draw less than 20 watts, or even less than 17 watts, when driven to similar brightness by the DC power supply, that researcher would want to continue sorting it all out.

Regarding the scope indication, a simple test has been suggested that ensures the scope math is programmed to indicate real power using two square waves.

A researcher should welcome any such suggestions, particularly if the tests proposed use equipment the researcher already has and requires little time to perform.

If the scope reads zero power when the two square waves are out of phase, another step has been made toward confirming above unity operation.  If the scope does not read zero power, that would indicate the scope math is incorrect and efforts should be made to sort that out.

Surely you can see the logic in the above discussion.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: FriskyFritz on September 24, 2020, 10:05:41 AM
thank you Stefan  ;)
I warned Die silly boy
I told him he was breaking rules
we will eat sausages now
Fritz

Terms and Conditions
« on: September 15, 2008, 12:40:28 AM »
1. Introduction

The Website Owner, including subsidiaries and affiliates ("Website" or "Website Owner" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions set out in these website terms and conditions, the privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website.


2. Information on the Website

Whilst every effort is made to update the information contained on this website, neither the Website Owner nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, any share price information, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. the Website Owner reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only and is not intended for trading purposes. You and your company rely on the information contained on this website at your own risk. If you find an error or omission at this site, please let us know.


3. Trade Marks

The trade marks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of the Website Owner. Nothing contained on this website should be construed as granting any licence or right to use any trade mark without the prior written permission of the Website Owner.


4. External Links

External links may be provided for your convenience, but they are beyond the control of the Website Owner and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of the Website Owner. Please contact us if you would like to link to this website or would like to request a link to your website.


5. Public Forums and User Submissions

The Website Owner is not responsible for any material submitted to the public areas by you (which include bulletin boards, hosted pages, chat rooms, or any other public area found on the website. Any material (whether submitted by you or any other user) is not endorsed, reviewed or approved by the Website Owner. The Website Owner reserves the right to remove any material submitted or posted by you in the public areas, without notice to you, if it becomes aware and determines, in its sole and absolute discretion that you are or there is the likelihood that you may, including but not limited to -

5.1 defame, abuse, harass, stalk, threaten or otherwise violate the rights of other users or any third parties;

5.2 publish, post, distribute or disseminate any defamatory, obscene, indecent or unlawful material or information;

5.3 post or upload files that contain viruses, corrupted files or any other similar software or programmes that may damage the operation of the Website Owner's and/or a third party's computer system and/or network;

5.4 violate any copyright, trade mark, other applicable Germany or international laws or intellectual property rights of the Website Owner or any other third party;

5.5 submit contents containing marketing or promotional material which is intended to solicit business.

5.6 All original content posted by a user becomes "public domain knowledge" and can not be patented anymore.

5.7 Hartmann Multimedia Service does have the right to compile summary articles from the forum postings
for easier reading and summary purposes.

5.8 Hartmann Multimedia Service does have the right to compile archival CD/DVDs for database storage and
distribution to people which have weak online access just charging work expenses and shipping charges.
No charges will be made on the content.

5.8 Content which was posted to the forums can be edited for changes or typos for 1 hour.
After this period you must post a new message to update your postings.
This ensures the verification of timing events and prevents data misuse and data manipulation at
a later time. If a user wishes to delete his content after this 1 hour period he has to apply
by email for it.
( If you are not sure, if you want to have a posting to stay in the forum, please don´t post !)


6. Specific Use

You further agree not to use the website to send or post any message or material that is unlawful, harassing, defamatory, abusive, indecent, threatening, harmful, vulgar, obscene, sexually orientated, racially offensive, profane, pornographic or violates any applicable law and you hereby indemnify the Website Owner against any loss, liability, damage or expense of whatever nature which the Website Owner or any third party may suffer which is caused by or attributable to, whether directly or indirectly, your use of the website to send or post any such message or material.


7. Warranties

The Website Owner makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.


8. Disclaimer of Liability.

The Website Owner shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither the Website Owner nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.


9. Use of the Website.

The Website Owner does not make any warranty or representation that information on the website is appropriate for use in any jurisdiction (other than Germany ). By accessing the website, you warrant and represent to the Website Owner that you are legally entitled to do so and to make use of information made available via the website.

10. General

10.1 Entire Agreement.

These website terms and conditions constitute the sole record of the agreement between you and the Website Owner in relation to your use of the website. Neither you nor the Website Owner shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and the Website Owner in respect of your use of the website.


10.2 Alteration

the Website Owner may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.


10.3 Conflict.

Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

10.4 Waiver.

No indulgence or extension of time which either you or the Website Owner may grant to the other will constitute a waiver of or, whether by estoppel or otherwise, limit any of the existing or future rights of the grantor in terms hereof, save in the event or to the extent that the grantor has signed a written document expressly waiving or limiting such rights.


10.5 Cession.

The Website Owner shall be entitled to cede, assign and delegate all or any of its rights and obligations in terms of any relevant terms and conditions, policies and notices to any third party.


10.6 Severability.

All provisions of any relevant terms and conditions, policies and notices are, notwithstanding the manner in which they have been grouped together or linked grammatically, severable from each other. Any provision of any relevant terms and conditions, policies and notices, which is or becomes unenforceable in any jurisdiction, whether due to voidness, invalidity, illegality, unlawfulness or for any reason whatever, shall, in such jurisdiction only and only to the extent that it is so unenforceable, be treated as pro non scripto and the remaining provisions of any relevant terms and conditions, policies and notices shall remain in full force and effect.


10.7 Applicable laws.

Any relevant terms and conditions, policies and notices shall be governed by and construed in accordance with the laws of Germany without giving effect to any principles of conflict of law. You hereby consent to the exclusive jurisdiction of the High Court of Germany in respect of any disputes arising in connection with the website, or any relevant terms and conditions, policies and notices or any matter related to or in connection therewith.

10.8 Comments or Questions.

If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us.
 


11. Copyright

11.1 It is forbidden to post copyrighted material. You can only post your own material
where no third party has any rights on it.
By posting your own original material you waive the rights to any copyright and you agree
to put it into the public domain. Then it is not anymore patentable.

11.2 All changed template graphics, buttons, icons, logos, layouts and look & feel, which are changed from
standard templates, are the copyright of Hartmann Multimedia Service, unless expressly acknowledged as otherwise.

11.3 The data mining, extraction or utilisation of product information from our website is not permitted without our express prior written permission.
 
   
Keywords - Website Legal Documents

legal, legal documents, website legal documents, privacy policy, privacy notice, copyright notice, terms and conditions, terms of use, hosting, terms, conditions, agreement, website documents, legal docs, disclaimer, law, trademark, free website legal documents, commitment, information, data security
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 24, 2020, 11:38:17 AM
What is the logic and target from this circuit ?
The efficiency from lamps as indicator :
                                                        lumen per Watt
lamps rated Watt : 2,8 Watt

2 lamps = 5,6 Watt

Charging with by  some assumed 17,8 Watt ' pure power" ~ 17,8 Wh hourly consume !
                                         
                                               5,6 Watt lamps lumen output / 17,8 Watt
                                                            lumen/Watt circuit  ratio ?


battery + lamps       versus battery + circuit + lamps   ' dura-cell like' teste for comparison !

Duration before and after !

Sincerely

p.s: ramset his heatbox teste configuration is well mind ,but :

between industrial same rated Watt-age devices are physical-technical output differences
Reference : terrarium hobbiists their heat bulbs comparison study

between lamp rated Volt-age/tension and used upper/lower Volt-age is a non-linear output as lumen and heat relationship
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 02:41:20 PM
Quote from: EMJunkie on Today at 07:28:17 AM
Quote
Well, to accurately measure the Power in the Circuit, we must Average the Instantaneous Voltage over time, and Average the Instantaneous Current over Time, this product is the Total Power during this time Period in this Circuit. Right? Do we agree?

This is incorrect.  If you program the scope to the above math, the scope will not indicate real power to the load.

You should instead multiply the instantaneous voltage by the instantaneous current, and then average that product.

Programmed as you describe, the scope would not read zero watts in the suggested "two square wave test" when the square waves are out of phase.  That is why that two square wave test was suggested as a quick test of the scope's math programming.  Programmed as I suggest, the scope will read zero watts when the two square waves are out of phase.

Perhaps CaptainLoz will perform the POC test again using the two series incandescent lamps as the load, note the supply and scope readings, and then drive the lamps to comparable brightness directly from the DC supply and note the power draw from the supply.  If the scope measurements do not agree with the "directly driven from the DC supply" measurements, consider reprogramming the scope math.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 02:43:07 PM
Quote from: EMJunkie on Today at 07:55:39 AM
Quote
Oh Picowatt, come on!

You are saying EXACTLY the same as I said!

That is not true.  You said:

"Well, to accurately measure the Power in the Circuit, we must Average the Instantaneous Voltage over time, and Average the Instantaneous Current over Time, this product is the Total Power during this time Period in this Circuit. Right? Do we agree?"

You appear to be stating that you should average the voltage, average the current, and then multiply those two averages together.

I said:

"You should instead multiply the instantaneous voltage by the instantaneous current, and then average that product."


PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 02:46:44 PM


P.S: IT IS IMPOSSIBLE TO HAVE THE SCOPE PROGRAMED INCORRECTLY! We have done DC Tests and Calibrated the Scope! There is ONLY A x B, to get the Right Measurements! Picowatt STOP Misleading People Man!


EMJ,

How does performing scope calibrations under DC conditions relate to measuring complex AC waveforms with reactive current flowing?

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 24, 2020, 02:51:11 PM

False Claim, there is no reactive Power, its all pure power, Voltage and Current are in phase and Power Factor is at or very close to: 1.0

False claim!

Now, GO AWAY Picowatt, it is clear you have no intention to research this Properly!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes

I do not understand how you can believe there is no reactive current flowing in a circuit having both inductive and capacitive reactance.

I began posting here again when you said you would quit deleting posts, but I see that did not last long. 

PW
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 24, 2020, 02:57:26 PM
Was it not written CaptainLoz worked with " 35% or less" duty factor/cycle !?

17,8 Watt x 0,35 ~ 6,23 Watts

17,8 Watt x 0,3   ~  5,34 Watts
                                  5,6 Watts 2 rated lamps Wattage
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 24, 2020, 03:02:48 PM
The consequences for humanity and our planet are enormous ...with holding life saving tech for no good reason other thanto call people "LIARS or Stupid or Dumb or "retards... Moron's etc"[Chris words here }when they are unable to replicate...makes people think the worst and frustrated !!

 I am extremely grateful Captainloz and Atti2 are sharing and trying to sincerely verify their work!
In science when such a claim of extraordinary value to humanity is made...you should run towards scrutinyand beg investigation..

there is a reason nobody has  been able to loop this work independant of a supply...we as a community need to find and separate the gain mechanism..and simple questions to verify output should never be met with attacks.
  Taking the temperature of a bulb for comparison...or benchmark ?
this is such a simple quick test ?



After all we are not discussing cooking or baking recipes ...here the tech will save lives and would have saved many
lives this last decade if shared publicly in a document![is that a crime ? ask a child over 5 years old ""Should I play hide and seek with Humanity for 10 years or save lives ??

this is an open source venue ...not a secret handshake club where the less fortunate must beg for Crumbs ...[for ten years]
and when those who know for years how to measure are vilified ?

PLEASE SHARE and help more to understand...this EGO war is costing lives as we type.
there are 85000 members here [and counting.... who could save millions of lives and many species and forests etc etc.
 
  Good Stefan shows his support for Chris at this forum[once again]
now let Chris reciprocate and show some anomaly ...he did write he would a few days ago [but ??
 We don't need math...we need food and clean water and power ....enuff Crumb dropping and beggingPlease tell us what the replicators who failed here are doing wrong [100's] ?instead of calling them LIARS ??

Lanca a thermometer or a light meter... same bulb... same results ...input power will give a temperature or benchmark !
IMO we now need a separate thread dedicated to "running towards scrutiny"
THE STAKES ARE TOO HIGH HERE....Too many are not joining in because of all this fighting and game playing [funny pics and
posts of starving children [as Jokes ?]

lives depend on this.... it is not a game.
when did this indifference for humanities suffering become OK ??
here there is a mission statement to the contrary

PLEASE OPEN SOURCE
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 24, 2020, 03:48:33 PM
CaptainLoz,

In reference to your video #5 seen here-

https://www.youtube.com/watch?v=Tk9uSOdj-hE

Before the video even starts, the first frame shows that you have the secondary resonating cap in parallel with the load or the lamps and you have the sense resistor in series with this combination.  Herein lies the source of your "OU" as you are including the reactive current through the capacitance in your overall power output calculation.  This is a common error that is easy to make.

Simply rewire the secondary circuit so that the sense resistor is in series only with the lamp load and then the capacitor would then be in parallel with that series network.  I think you will find that your OU goes away under these conditions.

Regards,
Pm
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 24, 2020, 04:15:10 PM
ramset,there is much technical evolution,actually and over the last decades !
Recognizing Mr.Sykes his circuit I compare it with Victor Arestovs and Zahardis/Sokolomov lamps consume power saving circuits,savings up to 85% !
But this -also- possible based by humans physiological activity barriers !

Now electric motors,specially hubmotors for e-drive vehicles,are becoming cheaper ,
f.e.MXUS from China/alibaba : 11 Euros/Kg motor costs  ,fob factory !
Roy Kessingers preview in the beginning from the 90' about prizes falls from 15 US$/hp to 5 US$/hp is becoming now real !
Taking Helmut Schiller his PAM motor/generator power/weight density : 3000 RPM 2 KW/Kg
we can remark low possible prices !
Cheap motor/generator technology ! For wind/water/solar heat force conversion !
Heat pumps,heat engines !
Now solar cells are in the 25 Eurocents/Wp in sell,this in KWh translated,assuming 1400 KWh average solar radiation per annum -15% conversion efficiency-30 years lifetime - 2,5% capital tax :
less than 2 Eurocents/KWh periodic electricity exploration !

I am/we are not resonsible for wrong living standarts of others - over-consume related !
By organized - per capita budget- enough energy ( electricity,heat,mechanical work) can be generated to income related relatively cheaper conditions than before/actually ,in future  !

Even - with 100% FE industrial/private households energy use :

we humans will die ,some younger,some older - than average !

Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 24, 2020, 08:27:45 PM
Lanca

 Quote,
 Even - with 100% FE industrial/private households energy use :

we humans will die ,some younger,some older - than average !
end quote

Lanca
A few feet of wire... a few more components and twice the output over input..its not even in the same Book as your many postings on "manufacturing cost analysis over investment return "
there is no frame of reference for lives it would save [over investment cost]
species which would be saved [over investment cost
etc etc...for 10+ years ....

5 million have starved to death since new builder topic was started here..Chris calls this self righteous cause [mission statement here]
100's have tried to replicate and failed...our best hope to understand ...is a builder with compassion..who answers sincere questions and shares results transparently [uncensored] !!
and then the many who have failed and given up [called too Dumb etc etc] ....can replicate and share !!
This is the very first time  successful Partner coil replicators have stepped forward here at OU.com and interacted with Partner coil open source replication efforts [Captainloz and Atti2]




Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 24, 2020, 10:35:52 PM
Not long ago, EMJunkie deleted a couple of my posts and some of his own. Soon after I posted them, I snapped a screenshot. Here it is, in case anyone cares to see what he refused to address. The more I read from this guy, the more I come to realize that he has it all backwards. It's unfortunate that he is so unwilling to discuss his project. Anyway:
bi

Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 02:39:59 AM
Bistander,

Don't feel bad.  EMJ has been like this for years.  And now that he has been given the power to delete posts on his thread, it has become worse.  He can insult posters and then delete those posts as if they never happened.  Not sure why that is permitted...

In over 5 years, I have never seen his POC do anything but light a bulb or two with more power being drawn from the power supply then it would take to light those lamps directly.  If he has accomplished more than that, I have not seen it.  And now it seems that if someone experiments with any circuit using any manner of coils or transformers, he takes credit as if it is using his "technology".

He has always resisted any discussions regarding measurement error and talks down to anyone who questions his "measurements".

Read his POC thread from 5 years ago.  Early on back then he did not even know why and when to use AC coupling on his scope, but apparently wanting to come off as an expert even then, he denigrated all who attempted to explain it to him.  Read a few pages from those days and you will see little has changed.

https://overunity.com/15395/partnered-output-coils-free-energy/75/

Check out reply 102 on this page:

https://overunity.com/15395/partnered-output-coils-free-energy/90/

He is learning as he goes along, but not without insulting all those who have attempted to share their knowledge and expertise with him trying to help him get there.

This forum is not what it used to be...

PW





 
Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 25, 2020, 03:26:00 AM
Thanks PW

I am aware of EMJunkie's condition. He just deleted another post from me which I'll paste after a copy of his subsequent post.

bi






Now the other Trouble maker is complaining. BooHoo...

You were warned! I warned you, I gave you both plenty of chances! You blew it, you have no one to blame but yourselves!

I have Zero Time to waste with stupid People! You come here, behave badly, you get moderated! Period! So get over it!

The truth of the matter is, you both have poor to none, professional Knowledge, and do nothing but make stupid posts, wasting others Time! There is nothing serious about your approach, then we don't want you here. Only a serious approach, with logical, sound posts are aloud!

I have asked for this in the first posts on both threads! Not as if you have not been told!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes


Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 03:48:53 AM
Bistander,

Don't let it get to you.  I was recently accused of somehow using "RMS" as well.  I have never even mentioned "RMS".  In fact, the only use of "RMS" I have read recently are in the posts he has made accusing others of using "RMS".

Just do what I do, sit back and grin... 

Life is too short.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 04:04:56 AM
Quote from: Emjunkie

 Some here are so DUMB!

 They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!

 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and Paid for Shills! Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!
 
 Best wishes, stay safe and well in these dire times,
    Chris Sykes
 
 


Very kind of you.

Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 25, 2020, 04:39:09 AM
   Call nurse Ratched, she'll know what to do with EMJ. 
   Who let him out? AG?  No, he let him in...
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 05:41:45 AM
17 watts from a DC power supply just to light a pair of 2.8 watt lamps...

PW
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 05:47:50 AM
...






Not knowing basic Resistance and Ohms Law well enough to calculate the real power when the Voltage Doubles...

1/RT = 1/R1 + 1/R2 = 1/70 + 1/70 = 1/0.02857142857142857142857142857143 = 35.00 and power is V2 / R = P = 25V2 / 35.00 = 17.85714 Watts

Oh dearie me...

I just sit back and Smile   ;););)

Using RMS Values to estimate Power...

Oh dearie me...

I just sit back and Smile   ;););)

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 05:52:56 AM
   Call nurse Ratched, she'll know what to do with EMJ. 
   Who let him out? AG?  No, he let him in...





Nurse Mildred Ratched is a fictional character and the main antagonist of One Flew Over the Cuckoo's Nest.

I guess only an antagonist, would know this  ;)

EMJ


P.S: Now who is who here, I know, the guy with the glasses is.......
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 05:55:41 AM
Junkie,

The fact remains, in video 5 at around 7:30, it was taking 17 watts
from the DC power supply just to light a pair of 2.8 watt lamps...
(which were the only load and appeared to be series connected)

PW
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 05:59:14 AM
Junkie,

The fact remains, in video 5 at around 7:30, it was taking 17 watts from the DC power supply just light a pair of 2.8 watt lamps... (which were the only load and appeared to be series connected)

PW






The fact remains PW, you have no idea how a basic Circuit works! Or how to calculate the power in the Circuit! Smudge has verified this:


OK you are now using the correct formula, and hopefully your Members (who look to you for guidance) will also do things correctly.

Smudge



Oh dear, how sad, never mind...

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 06:03:15 AM
All that said and still...

The fact remains, in video 5 at around 7:30, it was taking 17 watts
 from the DC power supply just to light a pair of 2.8 watt lamps...
(which were the only load and appeared to be series connected)

Perhaps we are to believe the readings on the power supply were in error?

PW
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 06:08:41 AM
All that said and still...

The fact remains, in video 5 at around 7:30, it was taking 17 watts
 from the DC power supply just to light a pair of 2.8 watt lamps...
(which were the only load and appeared to be series connected)

Perhaps we are to believe the readings on the power supply were in error?

PW






The fact Remains, Your Imaginary 2.8 watts is a fictitious value, one you have clumsily contrived from Fresh Air! An Irrelevant Value, not observed in the Circuit anywhere! Except your Head, behind those big ol glasses, maybe! Which could have been used, to observe, the Loads were in Parallel! Not Series!

Your expertise in Guess Work is to be commended! Well Done!

EMJ


P.S: Normally I would not reply, I would ignore, but in this instance, I think it is important for all other members to see why I delete your posts. One Flew Over the Cuckoo's Nest is quite fitting for the situation!
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 06:19:00 AM
Again, all that said and still...

The fact remains, in video 5 at around 7:30, it was taking 17 watts
 from the DC power supply just to light a pair of 2.8 watt lamps...
(which were the only load and appeared to be series connected)

Is there anything in the above statement that is not true?

Do you believe the readings on the power supply to be in error?

Are the lamps not actually rated 14volt @.2amps (2.8 watts)?

PW
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 07:06:35 AM
   Call nurse Ratched, she'll know what to do with EMJ. 
   Who let him out? AG?  No, he let him in...


Hi Nick,


You are not posting lately.
Are you still working on your device?


Do you have any news from Geo?
How is he?

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 25, 2020, 08:31:30 AM
All the non-believer demon spawn who are not obedient to emj will be beautifully moderated, demons begon.

This is comical to watch, thanks.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 09:32:40 AM
All the non-believer demon spawn who are not obedient to emj will be beautifully moderated, demons begon.

This is comical to watch, thanks.






Allcanadian, or onepower, which ever identity you currently prefer,

What was comical, was banning you for being a trouble maker on my Forum! That was a day I will never forget.  ;)

How is your Gaslighting thread going?

4 more years, 4 more years!!!

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 25, 2020, 11:41:12 AM
Mr. Sykes, US5130608,Nicolas Zahardis

'Electric module and method for reducing power consumption ...'
" .... Using Ohm's law ,these conditions would produce 100 Watt of PEAK power.Using Equitation I,the AVERAGE power in the Example 1 can thus be calculated,i.e. about 4 Watts. ....."


       Ohms law x PWM- factor = average power  ::)   

Sincerely

   
Title: Re: RANT CAFFE ASYLUM
Post by: citfta on September 25, 2020, 01:12:40 PM
A few years ago when I first saw the simple circuit with three coils and how it was being used I thought to myself "Apparently this guy has never heard of a buck/boost transformer."  The simple three coils on the same core are just a buck/boost transformer taken to an extreme extent.  Nothing at all special about it.


Judging from the extreme degree that Chris goes to to bash other people I can only come to a couple of conclusions.  He is either a paid shill on here in order to derail other real research or he has a very weak understanding of electronics.  Or possibly both.


PW please keep posting.  Your 17 watts in and 5.6 watts out says it all.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 03:29:50 PM

Allcanadian, or onepower, which ever identity you currently prefer,

What was comical, was banning you for being a trouble maker on my Forum!


That was a day I will never forget.  ;)

How is your Gaslighting thread going?

4 more years, 4 more years!!!

EMJ


What is comical in banning member?
Did you felt joy that day?

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 03:34:33 PM
Quote from: Emjunkie
Some here are so DUMB!
 They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!
 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and Paid for Shills! Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!
 
 Best wishes, stay safe and well in these dire times,
    Chris Sykes
 
 


Can you explain your words to members of this forum?


Stefan is also member of this forum.



Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 25, 2020, 03:51:11 PM
Carroll I know you probably are not concerned [fed up with this forum ] ,..however While Chris has historically relied on Similar comments to rally his builders...
written in his topics here for many years [always addressed to persons unable to get same results as he claimed]
lately he has chosen to turn the table on His Libelous words and get others Banned for similar [his ] behavior.
and I have heard it still persists at his forum [he Libels Members here who are unable to replicate.. while refusing their plea to do other tests to further verify...or help them also achieve success [Just says to his builders "nothing to see there"  just keep building ...I promise a few more crumbs coming soon for the worthy who ignore the measurement requests and "toe the line"
run away from the /their scrutiny....
do not measure the Temp of that Bulb against a control !!

lets instead measure the dead who have perished for lack of this tech...
https://reliefweb.int/report/world/12000-people-day-could-die-covid-19-linked-hunger-end-year-potentially-more-disease (https://reliefweb.int/report/world/12000-people-day-could-die-covid-19-linked-hunger-end-year-potentially-more-disease)
or just the 5 million who perish/starved already since Chris started topic 5 months ago...Nothing to see here....just keep playing !!
everything is fine in OZ .....







Title: Re: RANT CAFFE ASYLUM
Post by: citfta on September 25, 2020, 04:03:03 PM
Hello All,User WhatIsIt (https://overunity.com/pm/f/inbox/l/-1/done/sent/#msg82475)is on moderation, cause he has slandered permanently Chris...
Sorry, I am very busy with other things and can not moderate much... but with the function moderation single users,I can better see, what they post, before the postings go online...
If there is a claim, that someone runs a scam on his own website, I guess there would be comingother users forward, that feel being scammed... so are there any victims yet ??

Regards, Stefan.


My question is, when is Chris going to be put on moderation for slandering all the people that have tried and failed to get the results he claims?  He continually bashes anyone that questions his claims.  He even has gone so far as to claim they are Nazi shills.  Is that what you really want on this forum?  I realize you can ban me or put me on moderation also, but Chris has been on here bashing others for far too long.


Respectfully,
Carroll
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 25, 2020, 04:44:58 PM
   I agree with Citfta.
   We have seen this type of behavior before. And all that happens are insults, and more insults. Without an iota of free energy to show for it all. Is this what we want to see here?  Is this what Stephan wants to see??? Or is there another reason for not getting rid of the cause of this negative situation? As it is affecting this forum, big time. And it is why I have not been posting on what I'm working on, anymore. And most of our real replicators, have left this forum. Possibly never to return...
   My vote is to ban EMJ.  Just like Rick F, neither will change... while we watch this forum fall apart at the seams.
   

   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 25, 2020, 04:56:39 PM
The claim has been around with no true investigation for many many years..

Here for the first time we have an opportunity to understand [right now with Captainloz]
IMO a dedicated researcher who will try to help others ....and we have many "others" hoping for that help.

 Chris has written things here again about Graham G and others that got him Banned in the past ...IMO he preferred this banning to continue excuse not to open source or "run towards scrutiny"...he also said he could not except lack of moderation here [recent excuse] now person he wanted banned is gone...?

so hopefully no more excuses...he has moderated board where sneeze cannot happen without his approval. [for 5 months actually]
 
 The consequences for withholding or denying humanity access to a simple device that can run Aboveunity with a few bits and pieces... in a few minutes build time... ENORMOUS ??...lets get this sorted !!
the world needs this !! one way or the other !!
Captainloz super simple Aboveunity "few minute build for Low dollar cost" here  https://www.youtube.com/watch?v=B6X9jQIAVt4 (https://www.youtube.com/watch?v=B6X9jQIAVt4)
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 08:20:33 PM
Quote from: Emjunkie
Some here are so DUMB!

 They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!

 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and Paid for Shills! Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!
 
 Best wishes, stay safe and well in these dire times,
    Chris Sykes
 
 


Lots of my relatives were killed during Nazi occupation of Croatia.


And for Germans after the war life was hard because of that legacy.


You know that Stefan Hartmann is from Berlin,
and calling this site Nazi (him), and me working for Nazi,
will make damage to reputation of this site.
And I am not glad to someone call me Nazi servant,
because of history Croatia went trough.


I spent some money on replication of your device,
but I spent so much time on that, resulting only in lost time,
that it started to look that you are doing that on purpose,
to misslead me and others.
And you are keep doing that, again and again.


You are smart, and delibaratelly doing all of this.


For how much longer, Chris?

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 25, 2020, 08:32:45 PM
Quote
Some here are so DUMB!
 They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!
 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and Paid for Shills! Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!
 
 Best wishes, stay safe and well in these dire times,
    Chris Sykes

Even someone with "an IQ less than a pet dog" would know better than to post all that vomit and hate online.

Thanks for letting us know what kind of person you really are, lol.

Regards



Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 25, 2020, 09:03:53 PM
Ramset
Quote
so hopefully no more excuses...he has moderated board where sneeze cannot happen without his approval. [for 5 months actually]

5 months with no results however as we can see the whole forum has degenerated in that time while he gaslights everyone.
 
Quote
Captainloz super simple Aboveunity "few minute build for Low dollar cost" here  https://www.youtube.com/watch?v=B6X9jQIAVt4

There are more than a few problems relating to how the input/output is being measured and the circuit was only on about 20 seconds, lol. We could also look at the small bulb supposedly putting out 39 watts. Do you know how much power 39 watts is and what it's supposed to look like, that's not 39 watts. So this video is basically on par with most others showing some wire wrapped around a magnet lighting a bulb in my opinion.

If this is "light years ahead"... were really screwed, this is preschool, lol.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 25, 2020, 09:07:42 PM
Quote from: Emjunkie, "" Some here are so DUMB!

 They are NAZI Troll Shills, so dumb they don't even know they are working for the Nazi Party!

 Clown Idiots!
 
 I am so embarrassed to see a fellow human being oose so much DUMB!
 Bought and Paid for Shills! Paid Liars and Disinformation Trolls!
 
 Far too many brainless clowns here!
 Clowns with nothing, and no possibility of ever Succeeding!
 
 Evidence is a pathway forward, listening to Clowns, that have an IQ less than a pet dog, is not!
 
 Best wishes, stay safe and well in these dire times,
    Chris Sykes "" end quote


Lots of my relatives were killed during Nazi occupation of Croatia.


And for Germans after the war life was hard because of that legacy.


You know that Stefan Hartmann is from Berlin,
and calling this site Nazi (him), and me working for Nazi,
will make damage to reputation of this site.
And I am not glad to someone call me Nazi servant,
because of history Croatia went trough.


I spent some money on replication of your device,
but I spent so much time on that, resulting only in lost time,
that it started to look that you are doing that on purpose,
to misslead me and others.
And you are keep doing that, again and again.


You are smart, and delibaratelly doing all of this.


For how much longer, Chris?
Sir
see this is attempt to get banned again { i think atleast Dozens of similar posts last 5 months [or variations]
fits aboveunity membership drive model... looking to have pretend enemies to fight ...[Martyr Stuff....and excuses for letting so many die on Planet from lack of this FE tech...these last 5 years and counting .

again the games ....
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 09:35:25 PM



That statement that I work for Nazi forum as Nazi servant,
hurted me because of WW2 I never met my grandfather,
and my grandmother is German.


I have no more any intention to speak or get involved around
Chris Emjunkie, ever!


Only member who had guts to keep Emjunkie at distance,
and who cared got banned.


Why should I care if nobody wants?


From now, I will look only my bussiness,
and wont be on anybody way any more.



Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 25, 2020, 09:47:57 PM

Well,  the show and the circus should go on, to attract visitors. The moderator here favored Rick F. too versus
regular and helpful members and he simply put them under moderation, instead of asking for correct measurements from Rick F.

Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 09:56:48 PM
Well,  the show and the circus should go on, to attract visitors. The moderator here favored Rick F. too versus
regular and helpful members and he simply put them under moderation, instead of asking for correct measurements from Rick F.

Gyula


Thanks Gyula on your kind words.
If someone is wise, thats you!


The show will devastate this forum,
which already started.
Nick does not post, members are hidding.
Moderations.


What good is comming from all of this?


Chris is rulling this forum now!



Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 25, 2020, 10:00:23 PM

Here is EMJunkie's use of Ohm's Law to an MR16 12 V, AC/DC type, 7.5 W LED bulb, see the 1st attachment which is a copy
of his post on his aboveunity forum in the Captainloz thread.

I quote two sentences from his post, this is the 1st one: 

"The Resistance of this globe at 12 Volts and 7.5 Watts, is 19.2 Ohms approximately.

Let's accept this, albeit we do not know under what measuring conditions the manufacturer specified the 7.5 W power.
The lamp label includes 0.75 A current and this gives 9 W power at 12 V if we assume the numbers are DC voltage and
current, just for simplicity. Note that dividing the 7.5 W by the 9 W we get 0.833 i.e. 83.3% efficiency, sounds acceptable. 
Note also that 12V / 0.75A = 16 Ohm but again his 19.2 Ohm is still close to this and indeed approximatelly ok.

Here is EMJunkie's 2nd sentence I quote:

"If the Voltage across this Globe was 24 Volts, that means, according to Ohms Law, the Globe is consuming the Power of:
P = V2 / R = 24 Volts2 / 19.2 Ohms = 30 Watts." 

Well, this is not correct at all, the power draw at higher (or lower) than 12 V input voltages can only be answered by measurements
when someone does not know what circuits are involved in such lamps designed for AC/DC operation. 

Here are some measured data for an MR16 type LED lamp, https://www.youtube.com/watch?v=Cx0UYbXqfuE
 (https://www.youtube.com/watch?v=Cx0UYbXqfuE t)they were Kichler MR16 types. I attached a second snapshot from the video with his measurement results, taken at video time 3:30. 
He used a variable power supply and measured input current at the given input voltage levels.
I attached a 3rd snapshot I took from another 12 V AC/DC, 5W, 2700K LED bulb tear down video
 https://www.youtube.com/watch?v=i-Roc5TLdnw (https://www.youtube.com/watch?v=i-Roc5TLdnw)  and at the end of this video the person varied the input voltage in 1V and then in 2V
steps from 6V up to 30V from a variable power supply and logged input currents.

And what is also good in the 2nd video is that the full internal circuit of such 12V AC/DC LED lamps is shown and the operation of a
 constanct current drive is nicely explained.   
IF EMJunkie were a serious experimenter, he would not write about 30 W power he believes such LED lamp draws from 28V
but simply he would take measurements for his MR16 lamp. This would be valid for the two incandescent lamps too!

Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 25, 2020, 11:06:07 PM
...






Of course, getting children to randomly write some numbers on bits of paper has no Supporting evidence!

Supporting Evidence is the critical aspect, and I have it!

See the Image's Below:

1/RT = 1/R1 + 1/R2 = 1/70 + 1/70 = 1/0.02857142857142857142857142857143 = 35.00 and power is V2 / R = P = 25V2 / 35.00 = 17.85714 Watts
1/RT = 1/R1 + 1/R2 + 1/R3 = 1/70 + 1/70 + 1/19.2 = 1/0.08065476190476190476190476190476 = 12.40 and power is V2 / R = P = 25V2 / 12.4 = 50.40323 Watts

Gyula's handy guess work is not valid and I have just proven it! Oh dearie me, How Sad, Never Mind!

You're going to have to sharpen your pencils!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 25, 2020, 11:06:09 PM



I always measure my circuits with


current probe + voltage probe + scope math


and never had any problems.




Why to use precision resistors when there is so much which can go wrong
while using them?


Is there any special reason?

Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 25, 2020, 11:29:36 PM
We measure Excess Power!

Well, there's your problem...

PW
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 25, 2020, 11:57:32 PM
EMJunkie,  you already acknowledged Partzman's comments on the issues of Rigol scope measurements (8 bit vertical resolution
and the need for arranging the displayed waveforms to the fully available vertical display etc), remember? 
Now you show the same scope shot again, on which nothing was fullfilled from the requirements you did agree with. 
Your "supporting evidence" is garbage in garbage out.



Of course, getting children to randomly write some numbers on bits of paper has no Supporting evidence!
...
 

You have been doing this on the keyboard, no?  Your posts clearly prove that. 

Why do not you check the MR16 LED lamp for its power consumption like the two videos show, it would be a few minutes long test. 

Your own test results would reveal first of all for yourself how ridiculous your claim of the 30 W
for that LED bulb  was.  LOL 

BUT wait! the 30 W was your guess work !
Oh dearie me, How Sad, Never Mind!

Gyula

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 12:14:14 AM
...






Of course, getting children to randomly write some numbers on bits of paper has no Supporting evidence!

Supporting Evidence is the critical aspect, and I have it!

See the Image's Below:

1/RT = 1/R1 + 1/R2 = 1/70 + 1/70 = 1/0.02857142857142857142857142857143 = 35.00 and power is V2 / R = P = 25V2 / 35.00 = 17.85714 Watts
1/RT = 1/R1 + 1/R2 + 1/R3 = 1/70 + 1/70 + 1/19.2 = 1/0.08065476190476190476190476190476 = 12.40 and power is V2 / R = P = 25V2 / 12.4 = 50.40323 Watts

Gyula's handy guess work is not valid and I have just proven it! Oh dearie me, How Sad, Never Mind!

You're going to have to sharpen your pencils!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 26, 2020, 12:38:11 AM
EMJ,

I have a pop quiz for you...

A 0.1 ohm resistor is used as a current sensing resistor.  The resistor and its short PCB traces have 10nHy of inductance. 

At a frequency of 1.7MHz, what is the reactance of that 10nHy inductance and what percentage error does that reactance represent with regard to the 0.1 ohm resistance?

PW

 
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 26, 2020, 12:48:28 AM
v8karlo
Quote
I always measure my circuits with
current probe + voltage probe + scope math
and never had any problems.

Not with all complex wave forms and high frequency interference shown in the scope shot EMJ is peddling which is why any professional would laugh there ass off and walk away. The biggest problem is that most people only see the pretty colors and the squiggly lines and assume the electronics are smarter than they are. However a DSO is only as good as the person who knows how to operate it, knows it's limitations and knows what there measuring and seeing.

From what I can see the signal interference is causing errors because there is no way in hell that 7.5 watt bulb is sinking 49 watts, not even 7.5 watts.

Look, I have tested countless FE circuits and been hired to test many others work so when I see preschool stuff like this I tell the people who spent thousands of dollars to hire me were wasting our time here. This is a joke and no rational person would invest there time or money in it to my knowledge. You want to see something which does impress me look at Nelson Rocha's work. A small stand alone self powering circuit with no batteries and the output is self-evident. That's impressive.

Meanwhile EMJ is peddling a ridiculous dog and pony show to impress the weak minded, were better than this in my opinion.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 12:50:08 AM
EMJ,

I have a pop quiz for you...

A 0.1 ohm resistor is used as a current sensing resistor.  The resistor and its short PCB traces have 10nHy of inductance. 

At a frequency of 1.7MHz, what is the reactance of that 10nHy inductance and what percentage error does that reactance represent with regard to the 0.1 ohm resistance?

PW






1.7 MHz is Irrelevant, we do not use frequencies of this magnitude!

I don't understand why others can not take a serious approach? Why so much Silly?

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 26, 2020, 01:06:30 AM

1.7 MHz is Irrelevant, we do not use frequencies of this magnitude!


Have you looked at the scope shots?  There appears to be all kinds of high frequency harmonics and "hash" scattered all over the screen.

If you want to know the frequency content of your waveforms, look up the spectrum/FFT function on the scope and give it a try.

That little box with a frequency readout on the scope does not tell you the frequency content of the observed waveform (unless its a pure sine wave).

PW



Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 01:07:17 AM



Why you all adressing to Emj like that video is his work?


It should be Loz work?
And Emj knows about it like it is his own.


Strange.


Partzman already adressed to 0.1 ohm resistor possible pitfall.
Probe 1x, scope 10x.
Any error on 0.1 ohm will be multiplied by 10x on scope, giving all kind of BS.


Why not to use current probe?
With current probe person can not falsify results?


With precision resistors, there is always room for zig zag evasive manuevers,


avoiding the real measurements and possible error. Right?




At the end, why not loop device.
Very simple test, and most convinient.


Why the drama for a week now?

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 01:08:00 AM
Have you looked at the scope shots?  There appears to be all kinds of high frequency harmonics and "hash" scattered all over the screen.

If you want to know the frequency content of your waveforms, look up the spectrum/FFT function on the scope and give it a try.

That little box with a frequency readout on the scope does not tell you the frequency content of the observed waveform (unless its a pure sine wave).

PW






How about you give it a try?

Its not hard, or expensive! Metal Strip 0.1 ohm 1% falls in the category of a Precision Resistor (https://somanytech.com/what-is-a-precision-resistor/), I guess some are not that smart to understand this?

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 26, 2020, 01:32:07 AM

How about you give it a try?

Its not hard, or expensive! Metal Strip 0.1 ohm 1% falls in the category of a precision Resistor, I guess some are not that smart to understand this?

EMJ

The example I used was relevant to your 0.1 ohm resistor.  The inductance of your CSR, as connected, will be very close to 10nHy.  At 1.7MHz it will appear to be 0.2 ohms, a 100% error.  It gets worse with higher frequencies.

Using a similar 1 ohm resistor would reduce that 100% error to 10% at the same frequency (and as above, get worse at higher frequencies).

As Onepower stated "... a DSO is only as good as the person who knows how to operate it, knows it's limitations and knows what there measuring and seeing."

Just about everything related to sources of measurement error has been discussed ad nauseum in older threads.

PW
 
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 01:37:48 AM
The example I used was relevant to your 0.1 ohm resistor.  The inductance of your CSR, as connected, will be very close to 10nHy.  At 1.7MHz it will appear to be 0.2 ohms, a 100% error.  It gets worse with higher frequencies.

Using a similar 1 ohm resistor would reduce that 100% error to 10% at the same frequency (and as above, get worse at higher frequencies).

As Onepower stated "... a DSO is only as good as the person who knows how to operate it, knows it's limitations and knows what there measuring and seeing."

Just about everything related to sources of measurement error has been discussed ad nauseum in older threads.

PW
 






Why do you keep presenting Fake Data? I told you, 1.7 MHz is no where near the frequency we are using! We are well under 1 MHz! One was 3KHz!

Information provided by onepower has been proven wrong many many times, I cant trust someone that presents data that is incorrect!

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 26, 2020, 01:48:21 AM
picowatt
Quote
Have you looked at the scope shots?  There appears to be all kinds of high frequency harmonics and "hash" scattered all over the screen.
If you want to know the frequency content of your waveforms, look up the spectrum/FFT function on the scope and give it a try.
That little box with a frequency readout on the scope does not tell you the frequency content of the observed waveform (unless its a pure sine wave).

I think you get it, in fact the frequency was over of 987kHZ in the video near 1 MHZ. The maximum resolution of the DSO is 100 MHZ which means the resolution of the data is 100 to 1 at best with respect to which part of the signal it was triggered by or locked on to. Obviously it's a very complex signal with a great deal of hash so did it average part or the whole of the higher frequencies present?.

Here's a hint, whenever any value of the DSO, in all the values displayed starts reading null values the computer doesn't like what your doing like in the video. It does not compute, more so when a given period of one frequency rapidly changes to another frequency which not only introduces phase angles but interference as frequencies riding on other frequencies. Another hint, having programmed computers since they were invented I know computers are not smart but stupid. The logic and reasoning are only as good as the person who programmed them and we are far from perfect. Thus every computer is just waiting for an instance which we could not foresee that it cannot compute.

So wishful thinking is wonderful, I do it all the time, however reality is very hard and we should make the effort to understand what it is we think we are doing or seeing. As I said, this video is a joke and I would be embarrassed to show it to anyone I consider rational or a professional. They would tear it apart asking questions of the person who made it look stupid and has no answers for. Thus if your going to do it... do it right.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 26, 2020, 01:55:32 AM

 I told you, 1.7 MHz is no where near the frequency we are using! We are well under 1 MHz!


Do you not see all sorts of high frequency hash on Captainloz's waveforms? 

Just because the scope has a "frequency" readout, that readout is not telling you what the "frequency content" of the waveform is (except for a pure sine wave).

Inductance in the CSR is only one possible source of error, and common sense should tell you there must indeed be measurement errors.

Why? Because it does not take 17 watts to light a pair of 2.8 watt lamps...

PW 


Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 01:56:19 AM
picowatt
I think you get it, in fact the frequency was over of 987kHZ in the video near 1 MHZ. The maximum resolution of the DSO is 100 MHZ which means the resolution of the data is 100 to 1 at best with respect to which part of the signal it was triggered by or locked on to. Obviously it's a very complex signal with a great deal of hash so did it average part or the whole of the higher frequencies present?.

Here's a hint, whenever any value of the DSO, in all the values displayed starts reading null values the computer doesn't like what your doing like in the video. It does not compute, more so when a given period of one frequency rapidly changes to another frequency which not only introduces phase angles but interference as frequencies riding on other frequencies. Another hint, having programmed computers since they were invented I know computers are not smart but stupid. The logic and reasoning are only as good as the person who programmed them and we are far from perfect. Thus every computer is just waiting for an instance which we could not foresee that it cannot compute.

So wishful thinking is wonderful, I do it all the time, however reality is very hard and we should make the effort to understand what it is we think we are doing or seeing. As I said, this video is a joke and I would be embarrassed to show it to anyone I consider rational or a professional. They would tear it apart asking questions of the person who made it look stupid and has no answers for. Thus if your going to do it... do it right.

Regards


Good point,


My signals were always clean, more or less, so I have not this kind of problems.


What you suggest to him to measure it right?
If you know, help him with advice.

Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 26, 2020, 02:01:47 AM
CaptainLoz,

As I understand it at this point in time, you do have a device that appears to be AU/OU.  Are you willing to share the scope shots of this device for our scrutiny? This would possibly solve a lot of questions both here and there.

There are several key good engineering points that are being ignored by Chris and some of his followers and I would like to discuss some of those.  Some here have already pointed these out but I think it is good to refresh for everybody's well being.

1)  Scope resolution.  Enough has been stated on this but it is not being applied by Chris and group up to this point in time.

2)  Sense resistor value and type.  Caddock for one makes 1% precision film resistors designed especially for high frequency current sensing up to 100's of ohms in value and above.  Very low "L".

3)  The apparent lack of knowledge for the correct use of avg and rms.  For any waveform combination where current and voltage are involved and one wishes to know the resultant power, instantaneous samples are taken over time and multiplied at that instant and stored in memory.  These resultant products at the end of the measurement cycle, are then summed and averaged to get what is termed the true average power.

If however we wish to know the power dissipated in a resistor or resistive load, we can use the rms voltage and current for this calculation.  Why?  Because the rms of any shape waveform across a resistor produces the same amount of heat in the resistor as DC would.  Using avg for this would result in a lower value than the true value.

4)  Less than ideal circuit layout.  With the AM broadcast band starting at 535kHz, you can't expect accurate readings on any surrounding instruments used for measurement when many wire leads of considerable length are strewn all over.  You have many inductances creating various parasitic oscillations which broadcast into the equipment.  I mean it is futile to use a non-inductive sense resistor of any value when long lead lengths are all over the place even at several hundred kHz.

I would hope that someone from Chris's team or Chris himself would allow their circuit to be analyzed by those on this forum who are capable and there are many here.  It's time to end all the BS and get down to the job of achieving OU.  And Chris, if you say one more time that you have it, then PROVE IT!

Pm
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 02:50:51 AM
...






Partzman, I believe you missed CaptainLoz's (https://overunity.com/profile/captainloz.25682/area/showposts/) post. Worth looking up and reading. CaptainLoz's Thread: Captainloz's Asymmetrical Re-gauging Experiment (http://www.aboveunity.com/thread/captainloz-s-asymmetrical-re-gauging-experiment/)

CaptainLoz is still in very early stages, we have seen a few problems, which we have resolved. As time progresses, CaptainLoz will make improvements to his work, and the Output will go up dramatically. The Input will go down dramatically. You have seen this sort of thing working for mark Goldes back in the Day. I believe Graham Gunderson referrers to some of this in his video.

I find is very interesting, some here, dismiss a reading of Potential on the Scope, on the Output, that is not on the Input, as Noise, or harmonics, and dismisses this as a spurious effect. Any and All Readings of Potential, where V and I are in Phase, is Power, no matter what the Source! I think you need to correct your friends so they don't look like Numpty's in front of the entire community.

I have real trouble understanding how some manage to get themselves out of Bed in the Mornings? Why so much Silly Here? Why cant some here investigate this Seriously?

I would not blame CaptainLoz for making the thread private, so none here can see it, and not share any more with anyone! Behavior here is terrible!

CaptainLoz, is one of many, that has successfully replicated My Work! Many at different stages! There is nothing Hard Here! There are No Secrets! You all can do this! You only have to follow a few simple Rules, already laid out Here (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg545088/#msg545088)!

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 26, 2020, 08:54:24 AM
V8karlo
I use two supercap banks I made rated at 5 Farads /24 working volts, 30 volt max. So I know the exact input versus output with a simple calculation U=1/2CV^2. It's also easy to loop the output cap back to the input cap with a high efficiency buck converter.

So it's actually very easy to loop a circuit and I gave up on trying to use my DSO to measure complex HF waveforms years ago. It's basically a waste of time in my opinion.

Think of it this way, you could spend weeks using all kinds of expensive equipment trying to analyze input vs output. Or use two cap banks or a loop and know in minutes. So why dork around when we can know for sure in a matter of minutes?.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 26, 2020, 02:25:16 PM

Why you all adressing to Emj like that video is his work?


V8karlo,

What started this mess was a simple comment about two incandescent lamps.

Someone (EMJ or Ramset) posted a link to CaptainLoz's video #5 on the POC thread.  Having watched the video, I posted a comment on the non-moderated POC thread suggesting it was very unlikely that the two incandescent lamps being used as a load in video 5 at around 7:30 were dissipating what the scope was reading or even what the power supply readouts indicated.

I suggested connecting the lamps directly to the supply and driving them to similar brightness to see what the lamps draw, as a way to confirm measurements.

EMJ, as usual, became very defensive and argumentative and after several of posts back and forth riddled with his typical insults and trying to convince me the lamps were indeed somehow dissipating the indicated wattage, he deleted my posts. (I thought that thread was not moderated, what gives?)

In any case, shortly thereafter there was some admission of error regarding a bad probe used during that video.

So, from a simple suggestion that the lamps be connected directly to the DC supply to see what they draw at similar brightness, we have had page after page of argumentative discussion trying to bolster overunity claims with all manner of assumptions regarding the incandescent lamps, the LED bulb, the scope readings, and of course, insults and deletions. 

All that from suggesting the lamps were not dissipating the indicated wattage and that they should be connected directly to the supply for verification.

Perhaps were it CaptainLoz's thread he would have responded differently to the suggestion.  Perhaps CaptainLoz as well might have wondered if it were even possible for the lamps to dissipate that much power and connected the lamps to the supply to see what they draw.

But, it was EMJ's thread and EMJ's POC "technology", and it is EMJ that gets all defensive and insulting when anyone questions his claims of "overunity". 

I believe the advent of low cost digital scopes has led some OU researchers to inadvertently focus on connecting and tuning their circuits to cause the scope to erroneously indicate OU, which is relatively easy, and not focus on alternative measurement methods to confirm the power going to the load. 

Building a differential thermal or optical wattmeter is not that terribly difficult and could be given consideration, but there are even simpler methods within the reach of most. 

In the past we have seen lamps used as loads and low cost lux meters used to verify a circuit's output by driving the lamps to similar brightness with a DC supply as indicated by the lux meter.  If the lamp and lux meter are housed and located under fixed conditions when driven by either the circuit under test or the DC supply, a fair degree of accuracy should be achievable.  Something similar could be achieved using thermometry as well.

PW


Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 26, 2020, 03:46:22 PM
Sir I never posted Captainloz work to cause turmoil or confusion, any link I copied from forum here was just for use as a generic link to https://www.youtube.com/user/Captainloz/videos (https://www.youtube.com/user/Captainloz/videos)
   I was surprised somebody was finally allowed to share... an incredibly simple... solid state... replication here [Never happened EVER here ...not one replication with all info for others to join in never even on original topic over the 5-6 years time  period ]this is benchmark moment !
twice the output over input is truly a miracle !!
I hope he is allowed to share further ...and perhaps get away from support equipment and Scopes.. since now the output is HUGE
 many ways to check this ...and surely run completely autonomously ...[no batteries or power supplies etc etc.

we need more allowed to share all details for replications..the world needs a breakthru...
I see Aarons forum is posting some Glass Box Bedini thing now...[I suppose I will mirror a topic here for such simple builds to see where gain is...


makes me ill actually that such "SIMPLE" things are not just data dumped [open sourced] for all to build...so many need this now more than ever... [Bedini since 1984 ??? ]

check world famine site...most posting here are not even listed [Countries ]...Also Chris uses the word "girl" as insult here [makes me ill ]
woman {and their children} globally are suffering in Famine conditions now more than ever...AND GROWING WORSE EVERY SECOND !!
we need better men to step forward ...enuff TAUNTING Children... playing games while world suffers...Posting funny pictures and Finger pointing ...while laughing and posting party Pics  and joke pics of starving children of color...calling the suffering and struggling ...DUMB and much worse...as well persons here who are unable to replicate..
GROTESQUE
Not just one mans opinion
Chet K
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 04:08:12 PM



Measurements
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 04:52:24 PM
V8karlo
I use two supercap banks I made rated at 5 Farads /24 working volts, 30 volt max. So I know the exact input versus output with a simple calculation U=1/2CV^2. It's also easy to loop the output cap back to the input cap with a high efficiency buck converter.

So it's actually very easy to loop a circuit and I gave up on trying to use my DSO to measure complex HF waveforms years ago. It's basically a waste of time in my opinion.

Think of it this way, you could spend weeks using all kinds of expensive equipment trying to analyze input vs output. Or use two cap banks or a loop and know in minutes. So why dork around when we can know for sure in a matter of minutes?.

Regards


Just as you, I found that best way to avoid mess is to loop,
no better way.


You can see emidiatelly everything.


Agree!

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 04:55:08 PM
V8karlo,

What started this mess was a simple comment about two incandescent lamps.

Someone (EMJ or Ramset) posted a link to CaptainLoz's video #5 on the POC thread.  Having watched the video, I posted a comment on the non-moderated POC thread suggesting it was very unlikely that the two incandescent lamps being used as a load in video 5 at around 7:30 were dissipating what the scope was reading or even what the power supply readouts indicated.

I suggested connecting the lamps directly to the supply and driving them to similar brightness to see what the lamps draw, as a way to confirm measurements.

EMJ, as usual, became very defensive and argumentative and after several of posts back and forth riddled with his typical insults and trying to convince me the lamps were indeed somehow dissipating the indicated wattage, he deleted my posts. (I thought that thread was not moderated, what gives?)

In any case, shortly thereafter there was some admission of error regarding a bad probe used during that video.

So, from a simple suggestion that the lamps be connected directly to the DC supply to see what they draw at similar brightness, we have had page after page of argumentative discussion trying to bolster overunity claims with all manner of assumptions regarding the incandescent lamps, the LED bulb, the scope readings, and of course, insults and deletions. 

All that from suggesting the lamps were not dissipating the indicated wattage and that they should be connected directly to the supply for verification.

Perhaps were it CaptainLoz's thread he would have responded differently to the suggestion.  Perhaps CaptainLoz as well might have wondered if it were even possible for the lamps to dissipate that much power and connected the lamps to the supply to see what they draw.

But, it was EMJ's thread and EMJ's POC "technology", and it is EMJ that gets all defensive and insulting when anyone questions his claims of "overunity". 

I believe the advent of low cost digital scopes has led some OU researchers to inadvertently focus on connecting and tuning their circuits to cause the scope to erroneously indicate OU, which is relatively easy, and not focus on alternative measurement methods to confirm the power going to the load. 

Building a differential thermal or optical wattmeter is not that terribly difficult and could be given consideration, but there are even simpler methods within the reach of most. 

In the past we have seen lamps used as loads and low cost lux meters used to verify a circuit's output by driving the lamps to similar brightness with a DC supply as indicated by the lux meter.  If the lamp and lux meter are housed and located under fixed conditions when driven by either the circuit under test or the DC supply, a fair degree of accuracy should be achievable.  Something similar could be achieved using thermometry as well.

PW


What you are saying should be practice always.


First connect lamps directly to regulated supply,
then measure circuit and compare those two.


It is logical and beyond any doubt!

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 05:05:28 PM



And for those who want to avoid simple things,

here are methods of measurements with all pitfalls,

which can, and probably will occur at some point.



Courtesy of Dr. AG.





Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 26, 2020, 05:36:51 PM
V8
 Dr AG is original source of Floyd Sweet and Bucking coil info to Chris ?..and never replicated anywhere else since ? [many,many years Now ?

 is this accurate to write [aside from recent Chris hidden claims with batteries and power supplies]?
or should not be written here ?[I will remove comment ?was written here before but not sure if removed...
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 05:41:16 PM
V8karlo
I use two supercap banks I made rated at 5 Farads /24 working volts, 30 volt max. So I know the exact input versus output with a simple calculation U=1/2CV^2. It's also easy to loop the output cap back to the input cap with a high efficiency buck converter.

So it's actually very easy to loop a circuit and I gave up on trying to use my DSO to measure complex HF waveforms years ago. It's basically a waste of time in my opinion.

Think of it this way, you could spend weeks using all kinds of expensive equipment trying to analyze input vs output. Or use two cap banks or a loop and know in minutes. So why dork around when we can know for sure in a matter of minutes?.

Regards

Looping the device has one wonderfull thing.

Voltage from source and voltage from feedback loop will equalize,
when met together, removing all hash and leaving
only one variable to deal with
currents.
Equalization will not affect only voltage, but all kind of things,
and currents will adapt accordingly.

By observing current from source and current from feedback line,
imediatelly is seen how much is going into circuit and how much is returning
to circuit.
By comparing two currents it is easy to see real cop with more than 99% accuracy.
And there is no room for error.
And there is no need for complicated procedures.

Everything is visible at once.

To avoid overvoltage in case of overunity, simple zener to shutdown pin of
controller is sufficient to stop desaster.

This is simplified view, but more like block diagram explanation.

This method removes all unnecessary pitfalls.


Loop the device is ultimate test.



Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 26, 2020, 06:46:22 PM
V8
 Dr AG is original source of Floyd Sweet and Bucking coil info to Chris ?..and never replicated anywhere else since ? [many,many years Now ?

 is this accurate to write [aside from recent Chris hidden claims with batteries and power supplies]?
or should not be written here ?[I will remove comment ?was written here before but not sure if removed...


Yes, Chris found out from Dr. AG about bucking coils,
and material on Floyd originate from Dr. AG,
who is in Patrick Kelly book also.


Dr. AG team did extensive research on bucking coils and after
lots of time spent, and money, they gave up.


I wont go in details, but they tried everything.


That does not mean that bucking coils wont find its usage somewhere.


That means that with good funds and educated researchers they did not find
anything sifnificant!
 
In short.


Some pictures of bifilar experiments are not from Floyd as Chris claims,
but from Dr. AG team researching possible variations of bifilar and
bucking coils in order to find cause of effect from Floyd device.


Chris is mixing Floyd stuff with separate research of Dr. AG,
thinking that it all originates from Floyd.
But it isnt.


Title: Re: RANT CAFFE ASYLUM
Post by: seychelles on September 26, 2020, 07:01:26 PM
ONE POWER IS ABSOLUTELY CORRECT. WHEN ELECTRICAL FREE ENERGY WILL
VERY SOON BE DISCOVERED, IT WILL BE VERY EVIDENT AND WILL NOT NEED ANY
SPECIAL MEASURING INSTRUMENT.
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 26, 2020, 08:20:48 PM
  Selfrunning, YES!!!
  The rest is just an illusion... an ego jack off, you might say, for EMJ.
   But, it won't light your house, while it may be more efficient, at best. Self running, I doubt it, after all this time.   If so, let's see it. Cause, I don't believe it's worth the time of day, and months of playing games.   NEXT...  as this is just a diversion, so that someone can keep dreaming about making some money, from us "stupid guys", here.
   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 26, 2020, 09:12:25 PM
NickZ
Quote
Selfrunning, YES!!!
  The rest is just an illusion... an ego jack off, you might say, for EMJ.
   But, it won't light your house, while it may be more efficient, at best. Self running, I doubt it, after all this time.   If so, let's see it. Cause, I don't believe it's worth the time of day, and months of playing games.   NEXT...  as this is just a diversion, so that someone can keep dreaming about making some money, from us "stupid guys", here.

We should understand the difference between people gaslighting others to manipulate them and a sincere belief with honest intentions. For example many televangelists claim to believe in god yet often violate everything the belief stands for. They say one thing yet continually do the opposite proving there liars. However there are also good honest people who actually make an effort to follow there beliefs outside the context of power and greed.

The fact remains that nobody can claim to care about others and want to help them then continually gaslight and dehumanize others every chance they get...it simply does not hold water, it's a lie. 

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 26, 2020, 10:56:24 PM
...






You people should be ashamed of yourselves!

The world is watching, and you act like Spoiled Children in front of every one!

You most definitely are making Stefan and His Forum look like a shambles! If I was Stefan, I would ban the lot of you! What Spoiled Children! Sour Grapes, All of You!

The Original VTA Zip Files (http://www.hyiq.org/Downloads/Floyd Sweet/Original VTA files.zip) that someone released in the early days is all the information I have had, except for a Document Dump by an anonymous Source, which I promptly shared with every single Human being on the Planet: Here (http://www.hyiq.org/Reference/Profile?Name=Floyd%20%27Sparky%27%20Sweet).

You people act like Children, all fighting over the same Ice cream! You should be ashamed of yourselves!

From today forward, I will be making CaptainLoz's Thread and all other threads related to the Technology that we have investigated and found to be beneficial, PRIVATE!

I will not be sharing any more information Here, for your benefit!

I will be going through and Deleting selective posts I think can help others progress, so they have nothing to work from!

You, here, ARE The Epitome of the Worlds Problems! Your attitudes and behavior's of Spoiled Children that deserve nothing but a Tanning from your Parents! Lying without even blinking an eyelid! So many lies from some of you! One of life's Golden Rules broken and you don't even care!

I am 100% sure, 6 - 8 of you here are Paid Disinformationalists, still, as it was in the old days! This is what Good People have to deal with! A shame!

Disgusting!

EMJ

Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 27, 2020, 12:14:35 AM

You people should be ashamed of yourselves!

The world is watching, and you act like Spoiled Children in front of every one!

You most definitely are making Stefan and His Forum look like a shambles! If I was Stefan, I would ban the lot of you! What Spoiled Children! Sour Grapes, All of You!

The Original VTA Zip Files (http://www.hyiq.org/Downloads/Floyd Sweet/Original VTA files.zip) that someone released in the early days is all the information I have had, except for a Document Dump by an anonymous Source, which I promptly shared with every single Human being on the Planet: Here (http://www.hyiq.org/Reference/Profile?Name=Floyd%20%27Sparky%27%20Sweet).

You people act like Children, all fighting over the same Ice cream! You should be ashamed of yourselves!

From today forward, I will be making CaptainLoz's Thread and all other threads related to the Technology that we have investigated and found to be beneficial, PRIVATE!

Well, CaptainLoz, do you personally agree with this? 

Quote
I will not be sharing any more information Here, for your benefit!

For our benefit?  No, I don't think so!  It is for YOUR benefit because you can't support your claims and your action only confirms this!

Quote
I will be going through and Deleting selective posts I think can help others progress, so they have nothing to work from!

Wow!!! Talk about childish!!  You see Chris, all you would have to do is show something but you refuse for some reason ad it appears to be that you really have nothing IMO.  You cover that fact with all the various nonsense electrical theory BS from this source and that, and basically I for one won't miss your postings. 

Quote
You, here, ARE The Epitome of the Worlds Problems! Your attitudes and behavior's of Spoiled Children that deserve nothing but a Tanning from your Parents! Lying without even blinking an eyelid! So many lies from some of you! One of life's Golden Rules broken and you don't even care!

You need to look in the mirror my friend because all you state above fits you to a "T"!

Quote
I am 100% sure, 6 - 8 of you here are Paid Disinformationalists, still, as it was in the old days! This is what Good People have to deal with! A shame!

There are no paid disinfo people here!  You may your brain washed followers believing that but it simply isn't true.

Quote
Disgusting!

You got that right!!!!!  Chris, I wish you the best but honestly, you are your own worst enemy!

Pm

Quote
EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 27, 2020, 12:40:59 AM
   Did you gùys hear that? Chris will not post here again.  How sad... The asylum will never be the same...
 
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 01:16:29 AM
   Did you gùys hear that? Chris will not post here again.  How sad... The asylum will never be the same...
 

What?

This was last episode of this seasson?

Ooo, shame. It was so good. Like Simpsons on steroids!
Always make me laugh, very sad indeed.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 01:20:54 AM



Wesley,


There are Russian agents everywhere, even in Australia.
Title: Re: RANT CAFFE ASYLUM
Post by: citfta on September 27, 2020, 01:45:29 AM
Did anyone that has even remotely followed Chris over the last several years have any doubts about how this was going to end?  Every time someone makes unsubstantiated claims and gets questioned about those claims it almost always ends the same way.  They throw a tantrum about the "unbelievers" and then leave.  My respect to smudge and partzman and the others for even trying to work with Chris.  They are better people than I am.


Respectfully,
Carroll
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 27, 2020, 02:04:11 AM
...






Respectfully,
Carroll

Interesting, can you not understand simple things? End, it is you people that are the end, not me!

Can you not read the Lies?

Can you not read the disinformation?

Are you a part of it?

HOW MANY TIMES Throughout History do you people need to be told before you work it out?

The list of names keeps growing!

I am not sure you people understand the most basic things! I mean right now: The Supply Chain Is Broken And Food Shortages Are Here (https://www.zerohedge.com/personal-finance/supply-chain-broken-and-food-shortages-are-here), this means, you have < 3 days.

Does this not ring alarm bells for you people?

Respectfully,
Carroll

Time grows short, and I have given up on you people, do you have the slightest bit of understanding what this means for YOU?

The IQ of Mud Bricks is a common theme on this thread, they all rush in and make the stupidest comments! Agents of EVIL Live HERE!

I am not missing out! You are, so make the jokes you wish, but everyone with an IQ greater than a Mud Brick, knows the Jokes are all on you! Starvation (https://www.youtube.com/watch?v=TjR8QReeuTU&t=1s) is a very painful way to die I have been told! Rockefeller Lockstep is well under way! It is not Fake!

Many Stupid People, will not Wake Up, they will be dead before they even realise what's going on!

Grow, Evolve, wake up, before its too late!

EMJ






...
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 02:11:40 AM
...






Respectfully,
Carroll

Interesting, can you not understand simple things? End, it is you people that are the end, not me!

Can you not read the Lies?

Can you not read the disinformation?

Are you a part of it?

HOW MANY TIME Throughout History do you people need to be told before you work it out?

The list of names keeps growing!

I am not sure you people understand the most basic things! I mean right now: The Supply Chain Is Broken And Food Shortages Are Here (https://www.zerohedge.com/personal-finance/supply-chain-broken-and-food-shortages-are-here)

Does this not ring alarm bells for you people?

Respectfully,
Carroll

Time grows short, and I have given up on you people, do you have the slightest bit of understanding what this means for YOU?

The IQ of Mud Bricks is a common theme on this thread, they all rush in and make the stupidest comments! Agents of EVIL Live HERE!

I am not missing out! You are, so make the jokes you wish, but everyone with an IQ greater than a Mud Brick, knows the Jokes are all on you!

Grow, Evolve, before its too late!

EMJ

...


I wish that WhatIsIt is here to give you warm farewell gift.


You are probably tired that he hammered you so many times,
but understand, all of that was with love.


We all will miss you as great lider and fringe researcher.


Dont forget us, come by some time!

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 27, 2020, 02:30:54 AM
...






v8karlo, NickZ and others here, I truly feel sorry for you!

Intelligence is clearly not your strong point! So much stupid behaviour from you! It is sad! The desperate things some people do for Money! I hope God has mercy on your Soul!

EMJ






...
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 02:50:23 AM
...






v8karlo, NickZ and others here, I truly feel sorry for you!

Intelligence is clearly not your strong point! So much stupid behaviour from you! It is sad! The desperate things some people do for Money! I hope God has mercy on your Soul!

EMJ

...


Emj,


This was never about winning!


If you made experiment here, step by step and only one person
succeded to replicate your idea,


You would be HERO for everyone, including me.


You would fill your forum as never before and had everything.


Why you played that poor game which brought you shame and bad reputation,
only you know.


Only person you can blame is you, yourself.


I see your passion and that you trully believe in what you are doing,
but thats not enough.


I can feel only sorry for you.
You had a chance to be somebody and you blow it totally.


Nobody hates you as you hate others. It is true!


Wish you good luck with your quest.
I mean it!


Be a better person first, and then researcher!
My advice.

Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 27, 2020, 02:59:26 AM
...
REMOVED DUE TO A BUNCH OF SPOILED, BRAIN DEAD, BRATS BEHAVING BADLY IN FRONT OF THE ENTIRE WORLD!!! On this forum!
Most cant even research their way out of a Paper Bag!
There is a relationship with a Mud Brick, about the same IQ!

Wesley,
There are Russian agents everywhere, even in Australia.

O boy.
I was just trying to respond to your comment.
Dear Friend EMJunkie
When you mentioned video translation of  Akula ... made by me
and also another one  restricted to view I was puzzled with my own comment from 2013 about resonance in resonance.
____________________
some history:
https://www.youtube.com/watch?v=mG_FsBn2qxk (https://www.youtube.com/watch?v=mG_FsBn2qxk)
At first Stefanov( Stephanov) was trying to attract me with his not self powered device and due to lack of my interest he
decided to go to international show to Hamburg Germany.
While in Germany he  went across German Investor.
Shortly after that  news about  Akula self powered  device  were more attractive to the Investor and conflicting with  Stefanov plans.
Stefanov decided to visit  Akula and traveled from Russia to Kazakhstan.
Tiger from Kazakhstan was hired by Stefanov   to examine Akula's device .
Tiger was my close friend at that time.
In the meantime  Akula visited  Riga Latvia to make deal with the same Russian of Chocolate Factory owners who
made deal ( 32000 euro) with Tariel Kapanadze in 2010.
The same Russians were responsible for poisoning me and Tariel in 2011 in the airplane from Prague to Tbilisi.
Tariel eat 2 spoon as he was heavily drunk . He was unconscious for 3 days.
I was lucky to vomit by force.
I decided to  don't go to authorities - Tariel device was more important to me.
Russian bosses from  Moscow were disappointed, 
American was alive.

In  Riga Latvia Akula's device didn't work, but device of Ruslan from Riga Latvia was working fine.
Than Akula  went to Germany  and his device didn't work  there as well.
He called Tiger for help.
Tiger went to Germany.
But that didn't help .
Akula is said to be dead now.
______________________________


_______________________________
 
Interesting is that  wen you mentioned the Akula's restricted video that is in Russian only 
I realized that you  EMJunkie   must speak  Russian.
I have learned  Russian here in USA while employing Russian Scientists lazy enough  or to  limited so much
that  I had no other  choice but  find more about all of that Russian Russia and its science.
Today I'm so fluent that I can  fly with it.
___________________________
I was very disappointed finding  all of the BS. ,dirt, ignorance to scientific  values
and to all of other values ....(if I could find any not yet altered, bend, deformed values  left there.)
I may be wrong but for me  it is  just the biggest mafia style reality  ever created in modern  World.
______________________________
Can you  explain to me what your knowledge of Russian language comes from?
=======================================


My original question was :
What the energy in your self-powered devices  comes from?

I was not satisfied with your answer,  and  you quoting me  with my own  comment from  2013.
- as my comment about resonance in resonance was  quoted by you without the link attached.

 In contrast to  you and your activity  I have no problem as of today to explain energy  origination
and energy conversion in Tariel Kapanadze  devices.
Tariel was lucky as well not being  poisoned sufficiently well by these  particular Russians.


________________________________
To make  my position clear:I want  you to know that I'm not against  you.
I have respect to you and every other Human being on this planet based on general rules of humanity value
despite their race, region, language,sexual or religious .. "whatsoever.."

But  having respect  to them doesn't mean that I like all of them and/or  I want to interact with them.
       having respect  to them doesn't mean that they  have any respect to me
                   
respect  to  cleverness  of the  magician doesn't make him a physicist.
                   respect  to  a man  bouncing on the line doesn't make  him  a flyer (
one that flies)
                   respect  to you EMJunkie doesn't make me a Kangaroo jumping
                   on or  around you
up/down for your own pleasure
__________________________
In my videos
https://youtu.be/XOTLfnMOSqQ  (https://youtu.be/XOTLfnMOSqQ)
https://youtu.be/He5xQOJHlrU  (https://youtu.be/He5xQOJHlrU)
I explained how energy is converted and used  based on Dr Corum and Viziv  patents/ experiments  analysis.
You didn't clearly  formulate  convincing  mechanism   of energy transfer.conversion and extraction.
No overunity  exist so with all due respect please  provide sufficient logical explanation


Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 03:11:17 AM



Wesley,


Is Akula really dead?
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 27, 2020, 03:37:35 AM
they say so..
Akula was  from Astana Kazakhstan
Tiger  from Kazakhstan doesn't deny it.
Svobodian Andrey is dead too.
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg549230/#msg549230

 (https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg549230/#msg549230)1. But  I was lucky in 2011 in the airplane from Prague to Tbilisi
https://youtu.be/fBgDwG2ZLkM?t=119
 (https://youtu.be/fBgDwG2ZLkM?t=119)https://youtu.be/Uugr-ElDoMk?t=826 (https://youtu.be/Uugr-ElDoMk?t=826)   
    than I found more about Russian owners of  big and known Chocolate  manufacturing from Riga Latvia  L...a  ( the poisoners) also dealing with Tariel Kapanadze (32000 euro deal)
    were  the female co-owner  was former Russian singer and another one was high level Russian government official
    I have got information from the same snitch who delivered  to Russians information about me the American  meeting with Tariel Kapanadze in hotel Opera in Prague.
    causing  2 Russian spies fallowing me in Airport  and than at the end poisoning in the plane by another group of  Russians.
    1 girl with boy  behind    me
    1 guy around 47 years old  3 rows  in front of me who handled the poison
    The snitch   (name Shota) was one of three guys called "friends" from the ever-present crew of Tariel, who flew with Tariel from Riga Latvia to  Prague
    Later Tariel excluded him  from his "friends"

2. Alexander Litvinenko was not lucky in 2006 https://en.wikipedia.org/wiki/Poisoning_of_Alexander_Litvinenko (https://en.wikipedia.org/wiki/Poisoning_of_Alexander_Litvinenko)
3. Anna Politkovskaya was not lucky in 2006 https://en.wikipedia.org/wiki/Anna_Politkovskaya (https://en.wikipedia.org/wiki/Anna_Politkovskaya) 
  she survived poisoning to be than  shot  from the gun in her own elevator.

4. Julia Skripal and her father were lucky 2019
     https://en.wikipedia.org/wiki/Poisoning_of_Sergei_and_Yulia_Skripal (https://en.wikipedia.org/wiki/Poisoning_of_Sergei_and_Yulia_Skripal)
5. Alexei Navalnyi was lucky month ago  2020 https://en.wikipedia.org/wiki/Poisoning_of_Alexei_Navalny
 (https://en.wikipedia.org/wiki/Poisoning_of_Alexei_Navalny)6.   https://www.themoscowtimes.com/2020/08/20/6-prominent-russians-who-suffered-poisoning-attacks-a71209#:~:text=Opposition%20activist%20and%20journalist%20Kara-     Murza%20Jr.%20almost%20died,2017.%20Russia%20denied%20poisoning%20Kara-Murza.%20Alexander%20Litvinenko%2C%202006
 (https://en.wikipedia.org/wiki/Poisoning_of_Alexei_Navalny)
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 27, 2020, 03:49:54 AM
they say so..
Tiger  from Kazakhstan doesn't deny it.
Wesley

It is a bad news. One more researcher as victim.

Thank you Wesley!


How we researchers can fight this?

Any thoughts?

I am not against that researcher make some money on invention,
so long as he aims that product hits the open market
and not to be forgoten in some vault.

But how to fight that same researcher will not be killed?

This is topic which everyone avoided till now.

Is there strategy to avoid deaths?
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 27, 2020, 03:54:07 AM
It is a bad news. One more researcher as victim.
How we researchers can fight this?
Be careful with "some" Russians
I may formulate  the thoughts but I may be than not in line with  technicality of this forum
I  and Tariel  we were  poisoned in the plane being in the same situation as Alexei Navalnyi
 look here :  https://overunity.com/18617/rant-caffe-asylum/msg551195/#msg551195 (https://overunity.com/18617/rant-caffe-asylum/msg551195/#msg551195)
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 27, 2020, 05:28:30 AM
V8karlo
I'm not against FE inventors making money either. However most are simply gaslighted by the investor/corporations and never get paid or have a mysterious accident.

From my research there are basically two ways the FE inventor could benefit. One start a grassroots company building and selling the technology with no outside investment. Two, give it to the world, tell everyone and take your chances.

The best option could be to tell everyone then build and sell it just like everyone else would. His is how a free market was designed to work so it benefits everyone.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 27, 2020, 03:43:11 PM
This needs understanding ,and explanation [link below]
Before this all started ..Chris approached me to say his members were working on Smudge work and could I invite Smudge to forum here.
intimating there were many who would participate from his forum.which I told Smudge and he gladly accepted.
there is much more to write...However...for now ...this needs attention as it is being used to divide community and imply hidden ...who knows what?
Also I honestly had no idea when Chris wrote "selfrun" he meant using batteries..I personally know of no such gain claim which survived  scrutiny ?
all persons I know of who experiment... always work towards Looping ...independent of battery or supply [to date no success I am aware of [or all reading here would know]!
I see now Chris implies this mechanism his members are seeing is the path towards autonomous running !

[which he will not allow to be publicly measured ...or share specific details for scrutiny ] .
now he has a member sharing something much better ...twice the output over input...there is no doubt he will not permit member to share publicly ///I hope Captain is man he seems to be...and wants to teach others...regardless the findings...
Captains previously busy Channel

https://www.youtube.com/user/Captainloz/videos (https://www.youtube.com/user/Captainloz/videos)
also member Atti2 here is another person I have great respect for...he asks questions and honestly feels he is seeing something
in his circuit[will add his You tube link when I find it
I am not aware of any other experimenters from Aboveunity forum that share their work publicly

It is obvious by Chris writings above ..his plan is to watch people Starve rather than open source...he makes enemys where there are none... as justification..
no idea the logic behind that at all ...?somehow he sells this to membership [under threat of banning for violation [his recent comment here to Fritz]
PersonallyI would not care who was reading or writing...
people are dying for lack of this FE [simple "1o minute to build and few dollars cost... twice out than in" FE"
nothing would stop me from sharing ...Tantamount to allowing or being a Part of Homicide from where I sit !!







Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 27, 2020, 04:59:12 PM
ramset/Chet,nothing speaks against battery or capacitor use as periodic  process  gain storage,but the total result in the circuit shall be output greater input and permanent cycling !


Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 27, 2020, 05:03:42 PM
v8karlo
It is a bad news. One more researcher as victim.

Thank you Wesley!                              end quote.

   Stivep: Can you tell us where or from whom you heard about Akula's death. And, any other details, as well.
              It would be good to be able to verify that, as it is very important for those guys that are on the same path.
   
             Interesting that Akula could not make his device work in Germany, or in Latvia, while Ruslan's device worked fine in his own home town.   Makes me wonder how many of the Akula/Ruslan type of device replications that people have made, are not working due to the same still possibly unknown geo/magnetic causes. And, we are still using schematics, data, and tuning information that where designed to work, in a different area.
   NickZ


   
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 27, 2020, 05:50:50 PM
Shared with permission of presenter
from here https://www.overunityresearch.com/index.php?topic=3951.msg84490;topicseen#msg84490 (https://www.overunityresearch.com/index.php?topic=3951.msg84490;topicseen#msg84490)


itsu Quote
As i already made a similar coil setup as Captainloz uses, i could not resist a replication attempt of Captainloz his setup presented in his video 9: "https://www.youtube.com/watch?v=B6X9jQIAVt4 (https://www.youtube.com/watch?v=B6X9jQIAVt4)"  in which he shows a COP of 2.

His circuit used there is slightly different from earlier ones as he now uses a variable cap to tune L2 for resonance.

As far as i can see his circuit used is shown in the diagram below.

The L2 and L3 coils are special as the inner parts (2/3) are folded back, see his video 5: https://www.youtube.com/watch?v=Tk9uSOdj-hE&t (https://www.youtube.com/watch?v=Tk9uSOdj-hE&t)    on his youtube channel: https://www.youtube.com/user/Captainloz/videos (https://www.youtube.com/user/Captainloz/videos)

My replication can be seen here:  https://www.youtube.com/watch?v=XLWkVofOCBk (https://www.youtube.com/watch?v=XLWkVofOCBk)

The resulting input / output measurements are in the screenshots below,  some specifics layout in the picture.

Screenshot 1: input 60mW,  screenshot 2: output 30mW for a cop of 0.5

I was using only my FG as input (5V DC square wave @ 30% duty cycle) and i don't think using a MOSFET driven by a FG will result in a higher COP.

Only potential problem i see is the groundloop caused by the FG grounded black lead and the scope ground leads when measuring the output.

But using a battery operated FG did not show a drastic change.

As we have lots of RF showing up in the output, i can imagine it will be hard to make correct measurements especially when using long(er) wiring and higher input voltages.

Non-members can reach me via a PM on Overunity.com.end
Quote ..
 
 Thanks to presenter
also for clarity as per prior post
I am going to be asking for clarity on below Smudge Gain verify post from 2015 shared by Chris .

also I am
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 27, 2020, 05:55:23 PM
RESPONSE#1

This needs understanding ,and explanation [link below]
/../
https://www.youtube.com/user/Captainloz/videos (https://www.youtube.com/user/Captainloz/videos)
also member Atti2 here is another person I have great respect for...he asks questions and honestly feels he is seeing something
in his circuit
/../
Thank you Ramset.
Smudge comment is very  educated and valuable.
Excellent English skills  professionalism and deep knowledge.
However logical errors are not  unique to the  bright and  convincing.
It is the level of the audience that often makes them , to eat  garbage and digest it.
_____________________________________

So Smudge  explanation ( confirmation of  Bucking gain)
can be chopped to the individual components  for purpose of analysis.
When looking  at these components of impedance I 'm delighted.
-Wow. this guy knows what he's talking about.

However when Smudge starts to talk about equivalent circuit  that makes me very much disoriented .
Smudge quote:
Quote
Wounding made on core with significant  magnetic  viscosity exhibits energy gain

Response to the quoted Smudge wording:
 
Quote
Energy storage in a transformer core is an undesired parasitic element.
With a high permeability core material, energy storage is minimal. In an inductor,
the core provides the flux linkage path between the circuit winding and a non-magnetic gap, physically in series with the core.
Virtually all of the energy is stored in the gap. if there is any gap. https://www.ti.com/lit/ml/slup124/slup124.pdf (https://www.ti.com/lit/ml/slup124/slup124.pdf)
please don't limit  Magnetic  Viscosity  just with  this:
Quote
The viscosity of the fluid in a magnetic field is predicted by dimensional analysis to be a function of the ratio of hydrodynamic stress to magnetic stress,
https://www.sciencedirect.com/science/article/abs/pii/0021979769902203 (https://www.sciencedirect.com/science/article/abs/pii/0021979769902203)

------------------------------------------------------------
____________________________________________


So what is viscosity?
Viscosity is: the state of being thick, sticky, and semi-fluid in consistency, due to internal friction.

What is magnetic  viscosity ?
Magnetic Viscosity:

!!!!!!The following article is from The Great Soviet Encyclopedia (1979).
  It  might  be  outdated  or  ideologically  biased.!!!!!!
https://encyclopedia2.thefreedictionary.com/Magnetic+Viscosity (https://encyclopedia2.thefreedictionary.com/Magnetic+Viscosity)
quote:
Quote
The existence of a time delay between a change in the magnetic field applied to a ferromagnetic
material and the resulting change in magnetic induction which is too great to be explained by the existence of eddy currents.   
(plasma  physics) The effect, possessed by a magnetic
field in the absence of sizable mechanical forces or electric fields, of damping motions
of a conducting fluid perpendicular to the field similar to ordinary viscosity.

I contrast to that I'm giving you ordinary  American Science link
Magnetic Viscosity
https://www.sciencedirect.com/science/article/pii/B9780128035818028071

 (https://www.sciencedirect.com/science/article/pii/B9780128035818028071)look for more in  PART#2


Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 27, 2020, 06:03:41 PM
RESPONSE#2
so yes everything  is nice here  right?
....or maybe not so much?
_______________________________

Well lets go  to other  component of pictured  comment of Smudge posted by EM Junke
as a  proof and confirmation of Bucking gain  of his devices.
Smudge verifies Bucking gain.png (https://overunity.com/18617/rant-caffe-asylum/dlattach/attach/178727/) (60.57 kB, 769x540
So step  by step :
what is that Bucking gain  about ?

____________________________________________
 lets start first from  bucking coil:
1. https://overunity.com/6477/bucking-vs-bifilar-coils-a-question-please/ (https://overunity.com/6477/bucking-vs-bifilar-coils-a-question-please/)
2.https://encyclopedia2.thefreedictionary.com/bucking+coil (https://encyclopedia2.thefreedictionary.com/bucking+coil) bucking coil
Quote
(electromagnetism) A coil connected and positioned in such a way that its magnetic field opposes the magnetic
field of another coil; for example, the hum-bucking coil of an excited-field loudspeaker.
3.https://www.glossary.oilfield.slb.com/Terms/b/bucking_coil.aspx (https://www.glossary.oilfield.slb.com/Terms/b/bucking_coil.aspx)
Quote
Typically, there is one transmitter and five to ten pairs of receivers and bucking coils that are balanced to remove direct coupling (https://www.glossary.oilfield.slb.com/en/Terms/c/coupling.aspx)//..//.
There are trade-offs in any response.




Buck  converter:
https://en.wikipedia.org/wiki/Buck_converter (https://en.wikipedia.org/wiki/Buck_converter)
Quote
A buck converter is a DC-to-DC power converter which steps down voltage from its input to its output.
https://www.sciencedirect.com/topics/engineering/buck-converter (https://www.sciencedirect.com/topics/engineering/buck-converter)
Quote
Buck Converter analysis  20 kHz, Vg=400V In. L=3.5 mH, C=50 µF, and R=30 Ω.


So why NONE OF THE OFFICIAL MONEY MAKING BODIES IN USA NEVER MENTIONED ABOUT
energy gain in bucking coil coming from ....// equivalent circuit analysis?//


I would love to hear from Smudge..
Is this honored British Gentleman
 backing, supporting, or confirming phenomena  presented by EMJunke?
or
Is it possible that  Smudge.. respected opinion was  just :
-used and abused ,
-raped
-and defecated at
by 
EMJunke and/or possibly by some of  his Russian team of   
educated in Russia
but not always  well  paid (in Russia) experts, ready to invent/promote/support any kind of
ideas  and/or  making statements ( if any)  for another $50/ mo?
without Smudge even knowing about it?


Note: the true data:
         Russian    average salary    in regions is around    $180/ mo
         Papua New Guinea - Papuasian  earns  in average $190/mo
         African Nigeria  average salary is $168 (only $11 less than in Russia) /mo                   
               
Wesley

Legal Note: all said by me  above and/or in
any comment made by me - is expressing only and/or entirely my personal opinion.

based on my  American Constitutional freedom of  speech and expression
That opinion can be changed, verified and adjusted based on credible factors. 
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 27, 2020, 06:33:42 PM
To All,

I would be very surprised if CaptainLoz or EMJ has not, by now, connected the lamp loads directly to the DC power supply.  A very simple test, suggested many deleted pages ago, the outcome of which could have very easily proven or disproven their scope readings.

Perhaps it is the results of those "lamps connected directly to the DC supply" tests that caused EMJ to take his ball and bat and go home...

PW

Title: Re: RANT CAFFE ASYLUM
Post by: bistander on September 27, 2020, 10:02:20 PM
To All,

I would be very surprised if CaptainLoz or EMJ has not, by now, connected the lamp loads directly to the DC power supply.  A very simple test, suggested many deleted pages ago, the outcome of which could have very easily proven or disproven their scope readings.

Perhaps it is the results of those "lamps connected directly to the DC supply" tests that caused EMJ to take his ball and bat and go home...

PW

Hey PW,
I think you've arrived at a reasonable deduction. Some people run and hide when embarrassed. It is likely the case here. Nice goin'.
bi

edit: I forgot there are certain conditions where the patient is incapable of embarrassment.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 27, 2020, 11:00:59 PM
Just a note
 I will not bother Smudge today,if he happens to read here Fine..however I do know from comments in the past.. he does not check forums on a regular basis ..I will reach out tomorrow

honestly whether Captainloz finds issues or not...understanding this Mechanism Chris uses to harvest gain needs
comprehension [in other builds he calls selfrun

others [David Bowling Matt Jones, Bedini Rick F.. Bill Alek etc etc?] besides Chris have claimed a gain while connected to batteries...these opportunities to verify such claims may seem like Funny comments to readers.
However getting this gain to manifest on the bench and fully understanding ["energy audit" for lack of a better word...
What mechanism is driving the gain claim ?["error" or True possible gain mechanism...?one reason I am thankful for Bedini info recently posted here for replication..
no one here has ever fully explained what is being seen and how the builders are doing it
and yes biggest reason has been "this secret.. or "that secret... and here Chris making this much more complicated than it has to be!
(IMO no stone left unturned
and here links to builder replication attempt [shared with permission
https://www.overunityresearch.com/index.php?topic=3951.msg84497;topicseen#msg84497




Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 27, 2020, 11:13:18 PM
...






Now that you all have blown your chance to learn, Loz and I are tired of all your stupid, the question arises:

   1: If you are still alive at the end of all this, Kali Yuga, will you have gained anything?
   2: If you gain anything will you share it with others?
   3: Will you get the same response I have received from all of you?


I mean really, being accused of being a Russian Troll, FFS, what children! Accusing Loz and I, as being the same person, what's wrong with all of you? Fix your stupid!

We do not use Batteries, other than to Start the Machines, then they are removed from the Circuit - Don't listen to: FAKE NEWS!!!

Smudge's Work was found to be a Small PART of our work, far from the answer! - Don't listen to: FAKE NEWS!!!

I am not, and NEVER have been connected to ANYONE, none of the names you mention!

See what I mean! No one can get their story straight!

I hope you learn, I hope you evolve, I really do, truth is, I hold very little hope for some of you! You have all made this harder on yourselves! You have no one to blame but your selves! I gave you ample opportunities! Hundreds of hours of Data! Not ONE HERE, took the opportunity! You have no one to blame but yourselves! Period!

PW has proven himself to have such poor knowledge in Electronics Engineering, that not a single person here should listen to him, many others have completely no idea, when they think they do, the most dangerous approach to Science a Soul could have! Some of you have likely never even done an experiment to make any progress, so yes, I hold very little hope for most of you!

Very little hope!


IF YOU ARE SERIOUS:
You need to approach with an OPEN MIND, Ready to learn! Then you can progress!

I take pity on you all, 2, nearly 3 decades, and not a single bit of progress!

Anyone ever noticed, I have a Trail of Successful Replications behind me? They all Support My Work! Not a single person through history has ever achieved this! Not one!

I wish you luck, you're going to need it!

   EMJ



P.S: Highly-Educated Americans Are By Far The Most Closed-Minded (https://www.zerohedge.com/political/highly-educated-americans-are-far-most-closed-minded-gallup) - See what I mean! Some, think they already know everything, when, very clearly, they DO NOT!
Title: Re: RANT CAFFE ASYLUM
Post by: Gear on September 28, 2020, 12:28:30 AM
...
 Not a single person through history has ever achieved this! Not one!

   EMJ


Noone did it like you.

They did much better.

Kapanadze
Akula
StevenMark
Floyd Sweet
Tesla
And many others.

In my line of work I saw many better than you.
But I never saw so badly behaved person as you.

You should.work on yourself.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 28, 2020, 12:34:13 AM
Noone did it like you.

They did much better.

Kapanadze
Akula
StevenMark
Floyd Sweet
Tesla
And many others.

In my line of work I saw many better than you.
But I never saw so badly behaved person as you.

You should.work on yourself.

Regards






And, Gear, your contributions to Humanity include What Exactly?

See what I mean! Foolish people, hiding behind fake Identities, with nothing of value to add! That is, except Pointless Noise!

Looks like a WhatIsIt post to me!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: Gear on September 28, 2020, 12:47:25 AM





And, Gear, your contributions to Humanity include What Exactly?

See what I mean! Foolish people, hiding behind fake Identities, with nothing of value to add! That is, except Pointless Noise!

Looks like a WhatIsIt post to me!

   EMJ

You are been posting for 5 months without working device.
If you were worth someone like me will be already approach you with proposal.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 28, 2020, 01:21:03 AM

...

We do not use Batteries, other than to Start the Machines, then they are removed from the Circuit - Don't listen to: FAKE NEWS!!! 



EMJunkie,

Indeed, we should not listen to fake news. You fail to mention how long that circuit remains in operation when the batteries are removed.  Even the "eternal" flash light circuit which is a much higher buzz on your forum now than the POC, cannot run from capacitors for long: the capacitors lose charge and the circuit dies out. Prove me wrong if this is not so! 

So who spreads fake news? 


PW has proven himself to have such poor knowledge in Electronics Engineering, that not a single person here should listen to him, many others have completely no idea, when they think they do, the most dangerous approach to Science a Soul could have!



Says who?  A desperate guy who uses Ohms Law for a LED lamp rated for 12 V operation at 7.5 W power and who calculates it to be 30 W when the same lamp is run from 24 V. Independent measurements clearly proved: the power consumed changes around the nominal consumption only a few percent due to the built-in constant current drive for the LEDs. 

So who has poor knowledge in Electronics Engineering?

Picowatt certainly has good knowledge, for instance his latest clever suggestion of connecting the lamp loads directly to the DC power supply to check the power levels at equal brightnesses has been fruitful: Itsu just did that test on the other forum and confirmed that his input and output power measurements by the oscilloscope on the POC circuit built as shown in Captainloz video 9 are well within the ball park i.e. the DC tests on the lamp confirms the power levels and hence the COP < 1. 

So what can we think of your POC? You have never shown correct, in fact any, measurements to prove your COP > 1 claim.

Chris, when will you look into the mirror?   You blame here several people for your own "weaknesses".

Gyula

PS Will you surprise us to stop your childish behaviour?
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 04:22:30 AM
The self-proclaimed Hero's have greater knowledge than everyone else already!

Talk about the the kettle calling the pot black...

EMJ,

In the very first video that you posted years ago, you used 15 watts from a DC supply to light a 3.6 watt incandescent light bulb to about half or so its rated brightness.

In the second video you posted, you used around 1 watt from a DC supply supply to light a similar incandescent light bulb to even less brightness.

Jump ahead 5 or 6 years to the present, and a replication you have endorsed as working properly and in accordance with your "theory" is using 17 watts from a DC supply to light a pair of 2.8 watt incandescent light bulbs (CaptaniLoz's video #5).

In a more recent video, (CaptainLoz's video #9) 19 watts from the DC supply is lighting a 2.8 watt incandescent lamp that looks slightly overdriven and a 7.5 watt LED lamp.

The above observations are just that, observations, and I really don't see how they can be in dispute.  Based on those observations, the circuit's appear to be very, very, inefficient.  Much more so than what could be achieved by connecting the loads directly to the DC supply.

If your POC is overunity to the degree claimed, and as your test equipment would have us believe, similar observations would instead be indicative of overunity operation.

For example, it would be very impressive if the DC supply was only providing 3 or 4 watts and yet you were able to illuminate to full brilliance the pair of 2.8 watt incandescent lamps as confirmed with a lux meter and connection of the lamps directly to the supply.

But that is never the case, the supply always appears to be providing significantly more power to the circuit than the loads appear to dissipate. 

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 04:50:47 AM
EMJ's response to my post above before he deleted it:

Quote
WOW CONCLUSIVE EVIDENCE!!!

Of being a total CLOWN!!!

Hahahahaha what a total dufus!

How Scientific of You McClownage!

   EMJ

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 05:04:21 AM
EMJ's second reply to my same post:
What a total diabolical mess of Non-Sense!

TOTALLY non scientific, total NON-Sense!

See why Picawatt can not be trusted! There is not a SINGLE bit of Scientific approach here at all!

NOTHING but diabolical Mess!

This seems to be a common theme on this Forum! Nothing but a bunch of Guessers!

Picowatt needs to be renamed to PicaGuess, or GuessaWatt

   EMJ

EMJ,

Dispassionate and objective observation is a major component of the scientific method.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 28, 2020, 06:09:34 AM
In the news...
They finally got a look at donny trump's taxes and it's no wonder he was so afraid and desperate to hide them.

Turns out he is a loser and going bankrupt. Not only that but apparently he's paid almost no tax and been illegally writing off all his personal expenses as business. He would probably be homeless if he didn't give himself and his friends hundreds of millions of dollars in tax breaks.

Apparently the Russians and many other foreign countries and groups have also been overbooking his hotels as bribes. Oh dear it looks like dipshit donny may not get reelected, maybe going to prison instead, lol.

It also explains why he's so desperate to rig the election and the supreme court or as donny jr said...were all going to jail. What a shit show.
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 06:12:10 AM

GuessaWatt, I think you may mean: "Disproportionate" perhaps? Wondered why I delete posts? In time, you may work out why?

It is clear, you know nothing of Scientific Method! We have proven this over the past 6 years time over. I would study facts some. Then, try to use the facts to put another clandestine story together.


Do you have an alternate video showing less power from the supply than what appears to be consumed by the load?

Perhaps I missed one...

Other than slinging insults, you seem unable, or unwilling, to address the observations I noted in my previous post in any scientific or technical manner.

I find it difficult to believe anyone would disagree with my observations.  I can post links and timestamps to the videos from which my observations were made for your review if you feel my observations were in error.

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 06:35:15 AM
EMJ,

Here are the four videos upon which I based my observations.  Please feel free to review these videos and indicate which of my observations you feel are in dispute.


Video #1 from about 7:40
15 watts from the supply to partially illuminate a 3.6 watt lamp:

https://www.youtube.com/watch?v=iJsVSMQqCOM

Video #2 from about 4:30
1 watt from the supply to illuminate to a lesser degree a similar lamp:

https://www.youtube.com/watch?v=ZhQgch4L5XY

Video #3 from about 7:30
17 watts from the supply to illuminate a pair of 2.8 watt lamps:

https://www.youtube.com/watch?v=Tk9uSOdj-hE

Video #4 from about 2:40
19 watts from the supply to brightly illuminate one 2.8 watt lamp and one 7.5 watt LED lamp:

https://www.youtube.com/watch?v=B6X9jQIAVt4

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 06:56:25 AM

GuessaWatt, I have told you many times over the Years: I have never shown a single Machine with Measurements! I have however shown you a Machine that "can" produce Above Unity Results!

I will never show you Measurements: EXACTLY for this reason. We now see your Scientific Method, of Guessing make a mockery of Science and the Field of Energy!

snip...

Why do 7 of 10 posters here Attack Me

snip...
They are trying everything they can to stop me! They do not want you to know what I know! Then they would loose Control and they loose their Money Traps!

Agents of Evil Everywhere! Mostly here, I know a few here have infiltrated My Forum under different names also! IP Addresses are tracked, Email Addresses are Logged! You would be surprised how easy it is to catch you simpletons!

I have a very simple proposal for you GuessaWatt, if you are a Non-Believer, why not just go away, do more important things in your Very Busy Day?

We all know the answer!

 EMJ

EMJ,

Please indicate/quote where I have ever "attacked" you or said anything insulting to you (or anyone else on this forum).  You cannot, because I do my best to treat everyone, even you, with a modicum of respect and politeness.

I am trying to have a dispassionate technical discussion regarding your POC technology.  If anyone is being attacked, it is everyone you insult and now, in this post, appear to even threaten.  Surely this violates this forum's TOS.

I have pointed out a few observations from a few videos and instead of discussing those observations, just look how you reply.

If you don't want to discuss your POC technology, perhaps it is you that should "just go away"...

PW
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 07:08:59 AM
What non-sense GuessaWatt!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 28, 2020, 07:33:01 AM
...






It amazes me, how others here, very selectively, choose what posts to Quote here and what not to!

Others will notice, some posts, they stay well away from! Wont touch it with a Stick!

Where have I been posting, what have I been posting, what information is contained? Hmmm, perhaps that information is important? That's why they don't go near it?

Ever noticed this simple, yet effective tactic?

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 07:39:30 AM
It amazes me, how others here, very selectively, choose what posts to Quote here and what not to!

Others will notice, some posts, they stay well away from! Wont touch it with a Stick!

Where have I been posting, what have I been posting, what information is contained? Hmmm, perhaps that information is important? That's why they don't go near it?

Every noticed this simple, yet effective tactic?

   EMJ

Yes, quite similar to your selective deletions...

However, there are some rabbit holes I will not go down out of respect for all those involved and the private discussions had after moving to another forum.

PW


Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 07:46:58 AM


This story of Emj becomes boring!


Emj claims Loz find  as its own and use this to tease members.
For months distracts everyone.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 07:51:32 AM



And question is does this Emj device is even working?!
Title: Re: RANT CAFFE ASYLUM
Post by: picowatt on September 28, 2020, 08:00:46 AM

This becomes boring!
snip...

You are absolutely correct!

My apologies to all for posting on this thread.

In the future, I'll try to think up something to rant on about...

Cheers,
PW
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 08:20:16 AM
You are absolutely correct!

My apologies to all for posting on this thread.

In the future, I'll try to think up something to rant on about...

Cheers,
PW

No appology needed picowatt, I did not ment your posts.
Your proposal is valid.

This whole story of Emj becomed boring and comedy.

Like he has intention to distract members.
And it is going for months now.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 12:36:46 PM


I been following Itsu attempt of replication CaptaiLoz video9.

I hope it will bring some light into this matter.
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 28, 2020, 03:21:30 PM
...






It amazes me, how others here, very selectively, choose what posts to Quote here and what not to!

Others will notice, some posts, they stay well away from! Wont touch it with a Stick!

Where have I been posting, what have I been posting, what information is contained? Hmmm, perhaps that information is important? That's why they don't go near it?

Ever noticed this simple, yet effective tactic?

   EMJ
words and math don't help most ...

builds from persons like CaptainLoz do help ...when they show procedure and when they interact with those asking for help so as to guide them and teach them so many more can advance the science..[which people are dying for lack of]

this is the very first time any member has ever done this here in 5 or 6 years with this partnered claim from aboveunityforum

OH to be clear there were many who tried to get advice years ago...[before aboveunity forum]

persons asked questions and were  attacked and called MIB or whatever

is it much easier to attack then answer questions ?

hopefully Captainloz is man he seems to be ...and truly wants to help humanity .
Watching your very good friend Captainloz and his years long struggle at your forum..[thru you tube or recent links... makes my skin crawl...[like a torture session with a sadist]??
Hopefully he shares without censor....or is even permitted by you to show more results of solid state COP2 Claim   thousands will build and follow his transparent example of super simplelow dollar... low investment ...twice the output over input..

The world needs more Captainloz from aboveunity forum who show 100% transparency ...and try to help
we have plenty of names to add to lists of previous and present FE claimants who play games while world suffers [and here you obviously delight in such games..
even to the point of torturing a friend for years...
while people Die and the world pays a huge price for lack of this tech !!

this is not a baking forum or knitting class ..this work would have saved millions of lives and  countless species from extinction these past years....our oceans our atmosphere...


 
  you write none here could catch up ...all are lost....and smirk...[to your obvious delight }
I hope your very good friend can catch up...and share !!
ENUFF


Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 28, 2020, 03:53:37 PM
   
   Why is EMJ still able to post here??? Nothing but lies, insults, and more lies.
   It's time to pull the plug on him, and stop wasting more time on total BS. Why has this not happened?
   This forum thread, and others have now gone to hell. And no one is doing anything about it.
   It's not sad anymore, but just stupid.   What people will do for money...
   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 28, 2020, 05:44:39 PM
Get it right if your going to quote Sigmund Freud

It's not money first its POWER, then , then MONEY!
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 28, 2020, 06:31:45 PM
   What "power"?  EMJ's simple bucking circuit won't even get out of it's own way. It does not produce OU, nor will it self run, even after all these years.  It is nothing but a bottle neck, to the input source. You don't need a scope and test readings to see that.  It should be obvious at least to most of us, by now,  as it is to me.
   But, my real concern is not that, at all, it's what is happening to this forum, and it's members, and their lack of anything new to discuss and work on.  That is what I'm concerned about.

   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 28, 2020, 06:52:11 PM
What’s with the banning talk ?
We have a very good man trying to be
Transparent in his work !


Captainloz will hopefully keep interacting  (if allowed ..he may have taken
Lgzwwlll vow ( can’t remember secret code shared previously by Fritz And EMJ)
He is the first to do this EVER from aboveunityforum


And also Atti2 is trying to share!!




So far two very sincere fellows ....more would be nice
You see we have replication struggles here!
—-///———-///


Chris keeps score at his forum ??
Let’s keep score with lives saved
Species pulled back from the brink of extinction


Cleaner air and oceans


Forrests etc etc


Not this game he plays ...he keeps the wrong scoreboard
Needs to DRASTICALLY changes his priorities!!


Not just one mans opinion




BTW
There are some fellows wanting to discuss other
Projects
However as noted above by Nick











Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 28, 2020, 07:00:59 PM
  Do we really need to keep kicking a dead horse???
  Really?
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 28, 2020, 07:18:03 PM
Sorry
I don’t believe for an instant that harvesting energy from
The environment could be a dead horse
And I am not alone


https://www.overunityresearch.com/index.php?topic=3951.msg84506;topicseen#msg84506 (https://www.overunityresearch.com/index.php?topic=3951.msg84506;topicseen#msg84506)


What does bother me greatly is the division in the community
And Chris willingness to sacrifice planet and lives and members
For no good reason


Partzman few pages back made “let’s figure this out offer”


Chris points at others and try’s to divide


I have not contacted Smudge yet
While Chris dismisses his achievements yesterday!!
One thing jumps off page ...and I see why he kept portfolios (his secret elite do this on whomever)
And tracking his and other members there and elsewhere!!



—//—//
ANY ANOMOLOUS GAIN is news
And honestly this Smudge note is news to me!


Unfortunately on the road for work today






Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 28, 2020, 08:03:53 PM
   "Sorry
I don’t believe for an instant that harvesting energy from
The environment could be a dead horse
And I am not alone".
                               end quote.
   Chet:
   I was not talking about harvesting energy from the ambient, as being a "dead horse".  I would never say that, if you know me. But, you don't seam to get the point. That there is NO free energy, OU, nor self running in any these mentioned circuits, nor in their shown videos. (That is the dead horse).  NO OU there...  As has been rementioned by Picowatt. IF, you read his last post concerning the 4 videos, where they are being shown as being some kind of proof of "overunity"concept of these simple circuits. When there is no over unity in those circuits, at all. Just measurement errors. Which can be seen even just with the naked eye in some cases, compared to the input drawn. In any case, we will not see these types of simple bucking circuits self running, any time soon. However, that is really what is needed, but without all drama, lasting for months on end.

   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 28, 2020, 08:28:57 PM
Nick I don't believe it is or was and one of Nelsons statements proves it,Read Henry Moray's
Paper on the subject but you have to be careful of the frequency's you use or it will suck
your energy in and convert it too.


https://fdocuments.in/document/morey-sea-of-energy.html
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 10:07:54 PM
Nick I don't believe it is or was and one of Nelsons statements proves it,Read Henry Moray's
Paper on the subject but you have to be careful of the frequency's you use or it will suck
your energy in and convert it too.


https://fdocuments.in/document/morey-sea-of-energy.html (https://fdocuments.in/document/morey-sea-of-energy.html)

A sentence from Moray pdf:

Moray device it is so constructed that the frequency is very
 much lower on the secondary side than on the primary side
and almost complete resonance established.


Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 10:42:03 PM

Has anyone here ever wondered why My Members very rarely post here, or share information with you? Has anyone ever questioned this very basic Fact?Other than a few disgruntled Members,


that ended up banned, for their actions,


ever wondered why

My Members are so Loyal? So Dedicated, so Enthused? You all should really start thinking about these simple things!

What makes for a Loyal person?

What's the fastest way to EARN Loyalty?

Best wishes, stay safe and well in these Dire Times,   
Chris Sykes



Fear?

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 10:56:01 PM

Emj was talking for 5 months without any working device.
And I am starting to doubt in his work, and is boring with all this talk.

However, CaptainLoz openly shared and trying to teach,
and my attention is on his work now.

I am sorry that Emj thinks that is something personal.
It isnt.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 11:13:18 PM
For a start I solved capacitor conundrum,
something which Emj can only dream about.

WhatIsIt proposed lenzless coil configuration,
again, something which Emj can only dream about.

Now lets see what Emj made in 5 months?
In short, nothing!

His member CaptainLoz made a discovery, not Emj.

At the end, where are your accomplishments Emj?
Only talking?

And for the end of this discussion, I am not interesting in talk with you.
And I am not your enemy. You are your worst enemy!

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 11:27:36 PM


...WHY IS ITSU MISSING THE MOST IMPORTANT BITS OF INFORMATION???https://www.overunityresearch.com/index.php?topic=3951.msg84490#msg84490 (https://www.overunityresearch.com/index.php?topic=3951.msg84490#msg84490)

He has failed!The most simple experiment, he has not listened to CaptainLoz and his recommendations, missed entirely the most important information!


WHY???
WHY???
WHY???

Damn, Itsu is a good experimenter, but he misses all the important information! Damn Man! This is a common theme, did the same when I was trying to help him, ignored the information I was trying to provide, just ignored it completely!


What did CaptainLoz show you in the videos?

Why are you missing ALL Of that stuff?

Its important stuff!I told you!
You can NOT Build these machines unless you gain the basic UNDERSTANDING First!

Without this understanding, you are never going to be able to do it!

Best wishes, stay safe and well in these Dire Times,   
Chris Sykes



I dont understand!

You know where the error is!

Simply, whay dont you show Itsu where he is doing wrong?
So Itsu can correct experiment and make it right.

It is simple to help him if your intentions are for him to succeed.


Help him !
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 28, 2020, 11:33:23 PM



I dont understand!


You know where the error is!


Simply, whay dont you show Itsu where he doing wrong?
So Itsu can correct experiment and make it right.








I am wasting my time with you v8karlo, I refuse to explain again and again the most simple things for you to only fail to understand.

Watch the videos, read the threads, I have now opened them, after my little data collection episode, so all public can now see them. You're really going to have to smarten up if you want to understand these very simple things!

Learn to do big peoples research, pretend you're Sherlock Holmes.

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 28, 2020, 11:40:17 PM
please spend a moment here ...

https://www.overunityresearch.com/index.php?topic=3951.msg84515;topicseen#msg84515 (https://www.overunityresearch.com/index.php?topic=3951.msg84515;topicseen#msg84515)
not everyone understands exactly what you are trying to write.... and not all speak fluent English as their Native tongue ..

or the forums would be filled with replications.

what Is presenter/builder above missing ?
PLEASE !!!!
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 28, 2020, 11:43:28 PM

Emj, I am bored of your talking!

If you want to help, just do it.

5 months of riddles and empty talk is become annoying to follow or read.

If you want to help, do it.
If you dont, I am tired of you!
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 28, 2020, 11:44:33 PM
EMJ
Quote
Has anyone here ever wondered why My Members very rarely post here, or share information with you?

Many say it's because there an assclown like you?, many many often say it, everyone, all the time they say it but I may not agree or I may always but not always.

Quote
Has anyone ever questioned this very basic Fact? Other than a few disgruntled Members, that ended up banned, for their actions,

Only a liberal snowflake would question it they say, not me but many many do. Many say you should be banned because your a bad hombre, maybe a drug user, pizza parlor pedophile, bad hombres like you they say. Everyone should be banned they say, banned and send there money to donny trump, he's the chosen one who is bankrupt and maybe, always going to prison for tax evasion. They say you should be banned for not sending all your money and not being loyal and obedient to donny. A useless tool they say you are, banned you should be, everyone banned they say because there not so smart like donny.

Quote
ever wondered why My Members are so Loyal? So Dedicated, so Enthused? You all should really start thinking about these simple things!
What makes for a Loyal person? What's the fastest way to EARN Loyalty?

All those far right commie snowflakes are all obedient and loyal little communists they say, not me but many many do say it. Loyalty is for losers they say, everyone all the time they say it, loyalty is for losers. I wouldn't say it but many often do and there probably right, always right, many many times there right.

I thought I heard donny trump, the chosen one say your an assclown, he may have said it, he says it all the time I hear, everyone is saying it, your an assclown they say, but I wouldn't say it even if everyone does.

Best wishes, stay safe, stay smart and not loyal or obedient, many many say that's for losers, it probably is, lol.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 28, 2020, 11:53:08 PM
EMJ
Many say it's because there an assclown like you?, many many often say it, everyone, but I may not agree or I may.

Only a liberal snowflake would question it they say, not me but many many do. Many say you should be banned because your a bad hombre, maybe a drug user, pedophile, bad hombres like you they say.

All those far right commie snowflakes are all obedient and loyal little communists they say, not me but many many do say it. Loyalty is for losers they say, everyone all the time they say it, loyalty is for losers. I wouldn't say it but many do and there probably right, always right, many many times.

I thought I heard donny trump, the chosen one say your an assclown, he may have said it, he says it all the time I hear, everyone is saying it I hear, your an assclown they say, but I wouldn't say it even if everyone does.

Best wishes, stay safe, stay smart and not loyal or obedient, many many say that's for losers, it probably is.






I remember, vividly, the day I banned you for being a Trouble Maker and not adding a single bit of useful information to topics! I will never forget that day! It was glorious!

Others here and aboard can relate to what I am saying I am sure! I mean you are not liked here, or at overunityresearch, banned from my forum, you ain't a very popular fellow over all are you Allcanadian, I mean onepower, or who ever you decide to be on the day!

4 more years, 4 more years!

Gitmo Power! Are you ready for the disappearance of certain members here and aboard?

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 29, 2020, 12:03:20 AM





I remember, vividly, the day I banned you for being a Trouble Maker and not adding a single bit of useful information to topics!


I will never forget that day! It was glorious!

Others here and aboard can relate to what I am saying I am sure! I mean you are not liked here, or at overunityresearch, banned from my forum, you ain't a very popular fellow over all are you Allcanadian, I mean onepower, or who ever you decide to be on the day!

4 more years, 4 more years!

Gitmo Power! Are you ready for the disappearance of certain members here and aboard?

   EMJ


Banning your own member because he asked questions is not
something with what normal human being should be proud of.
Title: Re: RANT CAFFE ASYLUM
Post by: verpies on September 29, 2020, 12:20:28 AM
Other than a few disgruntled Members, that ended up banned, for their actions,...
What was Itsu banned for ?
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 29, 2020, 12:24:07 AM

Emj,

Where is your kindness and love for humanity,
if you dont want to help Itsu and together with him solve
greatest gift for all man kind?

Now is the time to show your good intentions!
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 29, 2020, 12:29:35 AM
v8karlo
Quote
I remember, vividly, the day I banned you for being a Trouble Maker and not adding a single bit of useful information to topics!
I will never forget that day! It was glorious!
Others here and aboard can relate to what I am saying I am sure! I mean you are not liked here, or at overunityresearch, banned from my forum, you ain't a very popular fellow over all are you Allcanadian, I mean onepower, or who ever you decide to be on the day!
4 more years, 4 more years!
Gitmo Power! Are you ready for the disappearance of certain members here and aboard?

Amazing isn't it?, a little click bait and Chris Sykes can't help himself and jumps right in headfirst. Let's go there...
Quote
I remember, vividly, the day I banned you for being a Trouble Maker and not adding a single bit of useful information to topics!
I will never forget that day! It was glorious!

Ah, so in fact he just admitted that he does get off on this, Quote "It was glorious", the power to force his will on others and ban them for any reason if they are not obedient, very telling. To be honest I didn't think that much of it unlike Chris apparently.

Quote
Others here and aboard can relate to what I am saying I am sure! I mean you are not liked here, or at overunityresearch, banned from my forum, you ain't a very popular fellow over all are you Allcanadian, I mean onepower, or who ever you decide to be on the day!
4 more years, 4 more years!

I wasn't aware it was a popularity contest or a profit driven venture and I'm fine with that. So be it, there are many forums and I haven't given a second though to being banned but I see you have.

Quote
Gitmo Power! Are you ready for the disappearance of certain members here and aboard?

Gitmo, Guantanamo Bay detention camp, a U.S. concentration camp not unlike the Nazi's had and then you go so far as to imply many members here not loyal and obedient to you should go there?. You would send good hardworking people to a concentration camp to be tortured simply because there not loyal to you, very telling Chris... very telling.

Thanks for being so honest about how you really feel Chris Sykes at aboveunity.com , I knew with a little prodding you would tell us how you really feel, they always do, lol.

So let me recap, I do a little trump parody and you unleash this vomit and hate... well played Chris, well played. lol.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 29, 2020, 12:30:15 AM


WHAT Did I say in Post number One:


10% or less Duty Cycle. WHY?



CaptainLoz used 35% duty.

I am confused now?

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 29, 2020, 12:33:51 AM



Emj,


Just openly say what is needed that Itsu has to change in order to succeed?


Thanks.

Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 12:53:31 AM
What was Itsu banned for ?






Hey Verpies,

Itsu was not Banned!

This thread oozes Liars! CIA Disinfomationalists! Nothing on this thread has an ounce of sense or truth!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 29, 2020, 01:00:12 AM

Hey Verpies,

Itsu was not Banned!

This thread oozes Liars! CIA Disinfomationalists! Nothing on this thread has an ounce of sense or truth!

   EMJ


Then help the Itsu and be a hero!

Title: Re: RANT CAFFE ASYLUM
Post by: verpies on September 29, 2020, 01:17:00 AM
Itsu was not Banned!
Would "pushed out" be a better description?
Is this forum better off without his contributions?
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 01:33:22 AM
Would "pushed out" be a better description?
Is this forum better off without his contributions?






As far as I understand, Itsu was not ever a Member of my Forum! If he was, he did not make his presence known! On this Forum, I have no idea?

You must realise, a Contribution, must be inline with the Topic, so if the Topic is not followed with care, then it is no longer a Contribution. One can not Replicate something and not follow the rules of the Replication! A Replication must be precise! One can not Replicate a 40 Inch TV and build it Round, its not the same, not a Replication! It is something entirely different!

Yes, this forum, 7 of 10 here can not be helped! I agree!

Others, the ones that don't waste others time, the ones that want to learn, deserve to have the opportunity to learn, I believe, they should have access to the information!

   EMJ

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 29, 2020, 01:33:35 AM
Actually I believe itsu was put on moderation along with many who were unable to find a gain in Rick Friedrick claims..or they were threatened with moderation.
many members stopped posting here.

actually many similar comparisons with Chris...Rick writes walls of text to study...etc etc
and here like with Rick Itsu tries and just gets abused...so far.../..perhaps actual builder will help him "captainloz" [not sure he will be allowed tho [by Chris]
Captainloz is the first ever builder from Chris forum showing >most" info for replication


Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 01:39:19 AM
Actually I believe itsu was put on moderation along with many who were unable to find a gain in Rick Friedrick claims..or they were threatened with moderation.
many members stopped posting here.

actually many similar comparisons with Chris...Rick writes walls of text to study...etc etc
and here like with Rick Itsu tries and just gets abused...so farperhaps actual builder will help him "captainloz" [not sure he will be allowed tho [by Chris]




Ramset, really, man alive! You are such a Trouble Maker!

CaptainLoz is entirely free to do as he wishes, when he wishes and you know it! Why do you create so much Trouble Here?

We, CaptainLoz and I have given you all the information you need, all you need do, is follow it, with Care, and with Attention to Detail! I will, and I expect CaptainLoz to point out mistakes! If you are not going to do it properly! If you choose to represent our work, then you need to do it properly!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 29, 2020, 01:43:25 AM
you wrote here many times you would make his topic private if it were up to you.. and you did.
I believe 1000% Captainloz changed that...however he has not posted new movie and was on a run of updates...I hope he is truly free to share...1st time is a charm...
1000's await his guidance

starting with itsu would be good start






Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 01:45:04 AM
you wrote here many times you would make his topic private if it were up to youand you did
I believe 1000% Captainloz changed that...however he has not posted new movie and wason a run of updates...I hope he is truly free to share...1st time is a charm...






See what I mean, Trouble Maker! You are Clueless to Events and Facts!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 29, 2020, 01:51:18 AM





See what I mean, Trouble Maker! You are Clueless to Events and Facts!

   EMJ
Chris quote post number 433 this topic
From today forward, I will be making CaptainLoz's Thread and all other threads related to the Technology that we have investigated and found to be beneficial, PRIVATE!

I will not be sharing any more information Here, for your benefit!

I will be going through and Deleting selective posts I think can help others progress, so they have nothing to work from!
end quote for clarity was not the first time you threatened this here.[Captain topic
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 29, 2020, 02:05:45 AM
no idea what your writing about Gyula and such..I just read what you wrote here several times about making his thread private
like he had no say in it ...also did see you threaten here in a post fritz for posting something which was not for public view
"don't jeopardize your account" or some such thing
I honestly believe your members are afraid to share before they get the golden ticket ?[5 year wait ??]
it is a feeling most have from reading your comments...
ultimately I would hold you responsible for not sharing this life saving tech  as would most readers..
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 02:07:46 AM
no idea what your writing about Gyula and such..I just read what you wrote here several times about making his thread private
like he had no say in it ...also did see you threaten here in a post fritz for posting something which was not for public view
"don't jeopardize your account" or some such thing
I honestly believe your members are afraid to share before they get the golden ticket ?[5 year wait ??]
it is a feeling most have from reading your comments...
ultimately I would hold you reproducible for not sharing this techas would most readers..






100% of people here don't care what you think Ramset!

They see you as the Trouble Maker you Are!

   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: verpies on September 29, 2020, 02:55:24 AM
100% of people here don't care what you think Ramset!
I think he has better people skills than I do, so his opinion is significant to me and this makes it less than 100%
Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 29, 2020, 03:05:10 AM
 
   "Suck up your silly, get over your hissy, pull up your Boot Straps and get on with it man! Stop crying because I changed my mind"!

   EMJ
          end quote.

   Hey:
   Can someone please translate that?  While we go get the ropes. Call nurse Ratched, tell her he's on the loose, again.
   Verpies: This is all your fault.
Title: Re: RANT CAFFE ASYLUM
Post by: citfta on September 29, 2020, 03:55:20 AM
As far as I can tell the only person who doesn't have the highest respect for Chet is Chris who has nothing Sykes.  And his opinion means nothing to me and I suspect for most people on this forum it means nothing after this last little episode of " I know but you don't" by the almighty Chris.


Chet I have the greatest respect for you.  But if you think Chris actually has something, I am sorry to say he has misled you.  NO ONE is ever going to see any kind of OU from the POC (pile of crap) circuit.  As I have posted before his opposing coils are nothing more than a buck/boost transformer.  They have been used for many many years in industry.


His behavior alone tells the whole story.  If he actually had something he would be doing everything possible to prove it and willingly make any measurements to verify his claim.  He knows he has nothing and that is why he refuses to make any measurements or offer any advice as to why no one can get the results he claims he is getting.


It's time to put this to bed and forget about Chris the almighty Sykes who has nothing.


Respectfully,
Carroll


PS: Chet, I understand your philosophy about leaving no stone unturned, but sometimes there are stones that are better left alone because what is found under them is not good.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on September 29, 2020, 08:58:46 AM
" V = -N dphi/dt, or -N di/dt/dt"

EMJ, in other words, you say V = -N di/dt/dt. Can you explain?

Regards,
bi






Wrong thread...

EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: DavidWolff on September 29, 2020, 09:25:18 AM





Wrong thread...

EMJ
So why post it ? that's premeditated disruption, You need to cool down and think before you move.
Dave (Uni U Grad)

Please remove it !
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 29, 2020, 10:51:02 AM
.
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 29, 2020, 10:51:38 AM
What?
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 29, 2020, 01:37:10 PM


Ramset, Trouble Maker - I DID! The thread was private, and Gyula signed up a fake account to access information, already covered. Guyla fell right into the most obvious Honey Trap! EXPOSED!

I changed my mind, as I did on my Builders Thread! I am entitled to change my mind! I changed my mind due to an email I got from a very nice person, Apologizing for all you Trouble Makers Here! Do you think someone else, should be apologising for your bad behaviour? Is this the reputation you want for yourselves? Really?

After several days, I reverted Changes! So What! Get over it! Good People should not miss out because of the Behavior of Stupid People!

You are such a Trouble maker! Do my activities have ANYTHING to do with you? Or anyone else?  You are a real Trouble Maker!

Suck up your silly, get over your hissy, pull up your Boot Straps and get on with it man! Stop crying because I changed my mind!

   EMJ

EMjunkie,   

What are you talking about?   

I did not sign up any account (fake or normal) anywhere and especially not on your site if you meant that.   

Please clarify this.  Your site was open for any non members for long till a couple of days ago when you made it private.  And now you reopened it. 

What information do you think I had access to? 

Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: Cadman on September 29, 2020, 02:59:11 PM
EMJ,

Even giving you the benefit of the doubt as to whether you have OU or not, if you had spent one tenth of your time here actually showing an AU device and helping others to understand it, we would ALL be building POCs now.

Instead you rant and insult everyone like a spoiled little brat who doesn’t get his way so you’re taking all your toys and going home!


Cadman
Title: Re: RANT CAFFE ASYLUM
Post by: partzman on September 29, 2020, 03:59:10 PM
As far as I can tell the only person who doesn't have the highest respect for Chet is Chris who has nothing Sykes.  And his opinion means nothing to me and I suspect for most people on this forum it means nothing after this last little episode of " I know but you don't" by the almighty Chris.


Chet I have the greatest respect for you.  But if you think Chris actually has something, I am sorry to say he has misled you.  NO ONE is ever going to see any kind of OU from the POC (pile of crap) circuit.  As I have posted before his opposing coils are nothing more than a buck/boost transformer.  They have been used for many many years in industry.


His behavior alone tells the whole story.  If he actually had something he would be doing everything possible to prove it and willingly make any measurements to verify his claim.  He knows he has nothing and that is why he refuses to make any measurements or offer any advice as to why no one can get the results he claims he is getting.


It's time to put this to bed and forget about Chris the almighty Sykes who has nothing.


Respectfully,
Carroll


PS: Chet, I understand your philosophy about leaving no stone unturned, but sometimes there are stones that are better left alone because what is found under them is not good.

@Chet,

Chet, I have to agree 1000% with Carroll and have wanted to tell you the very same thing.  At this point in time, Chris has shown thru his actions and words to be a researcher with a device not worth pursuing.  He answers questions with insults or no answer at all.  He responds to critical analysis of his device with false accusations and more insults.  What good is it?  Just a waste of time as he has demonstrated NOTHING IMO. 

We need to ignore him and his rantings!

Regards,
Pm

Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on September 29, 2020, 05:27:45 PM
Reading in aboveunity 'CaptainLoz's Asymmetrical ...... ' process and looking for the circuit  this let me remind to 2005 the application reading : DE29910512


  The clou : 'displacement current' to ' active current ' = C.O.P. ≥ 1 effect   


  Where does the energy ( velocity/speed change) comes : a. ambient ( surrounding objects)  b. material decay


Sincerely
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 29, 2020, 05:33:46 PM
I'm reposing here
COPY OF MY COMMENT PLACED at:
https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551356/#msg551356 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551356/#msg551356)


Copy:
Quote
Dear  readers and Dear  EMJunke
-----------------------------------------
As this post  is  in moderated  part of forum I'll keep copy of my  posting  separately.
__________________________________
After EMJunke  deleted everything my comment was  the very first  ever  posted   here.   
I was talking about  values, respect, etc.

https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551181/#msg551181 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551181/#msg551181)
But my original question was :


What the energy in your self powered devices  comes from?


__________________________________________


Dear  EMJunke:
You don't want to be called  any of the names listed below:



- Russian Troll (  paid  by Russian Propaganda)


- lair,


- magician
- money maker   the misinformation  fake  FE platform  builder


- delusional, self-deficient,
narcissistic case of  Cognitive impairment ,



 I don't call you with any  of the names.
I don't think there is a proven base  for it.
I don't think this is appropriate at the present time.
 
__________________________________________


But to be clear :
I'm pointing at that
what I don't like or don't understand about you.
Please enlighten me,

- why did you  bury my #1here comment with  bunch of old  postings?
- why are you throwing  bunch of equations, pictures  in response to simple  question.


THE ENERGY IN YOUR SELF-POWERED  FREE ENERGY  DEVICES COMES FROM WHERE?
Please  provide the answer  in  listed below format:

1.
Quote
based on laws of conservation of energy :
   energy can not  be created no destroyed .
format of answer:
Quote
My EMJunke device takes  energy (In) in form of ..... from ...........than converts this energy from .... and in form of ...... to .... form of energy.

2. this form of energy in My EMJunke
device is processed  and
delivered into the  load  in form of........


3. approximated initial energy  E (In) to output energy  E (Out)  efficiency is:
Final Statement:
My EMJunke device doesn't violate laws of physics because........( please provide  explanation)


Quote
From Wesley to EMJunke:

My respect  and community respect, and science respect can be yours and
 I may help you to become wealthy , known and powerful.
I don't need your know-how  secrets
.
Just convince me that you are not just like a simple piece  of Russian  currency - ruble  devastated by degradation  of all values.
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 29, 2020, 08:19:44 PM
backup of my post:
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551362/#msg551362 (https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551362/#msg551362)
called VERY FRIENDLY TO  EMJunke
My response was formulated  by me fallowing  the  the rules of "brutal  honesty Guide  "
link : ( listed  in the post)

Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 29, 2020, 08:47:35 PM
Cadman
Quote
EMJ,
Even giving you the benefit of the doubt as to whether you have OU or not, if you had spent one tenth of your time here actually showing an AU device and helping others to understand it, we would ALL be building POCs now.
Instead you rant and insult everyone like a spoiled little brat who doesn’t get his way so you’re taking all your toys and going home!

What did you think was going to happen?.

Chris has been copy/pasting others work with no results from the start while dehumanizing and gaslighting everyone. Did you not notice chris is using the same techniques and language as trump and all the other populists?. It should have been obvious how this sad story ends and like the rest his name will probably appear in the paper soon as the law suits and court cases start piling up.

Justice may be blind but it isn't stupid and it always comes full circle in time.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on September 29, 2020, 09:10:45 PM
Wesley
Wesley your asking us where the power comes from a self powering device, is this a memory test ?
If you cast your mind backwoods to a an existence in a land far, far away and 10 years or so back in time
you and your Lithuanian buddies created a device called the Lithuanian experiment, and very nice too.
and i'm not referring to the 'yoke' NM' device  :o
it used 2 spark gaps devices and an earth, have you got it now ? come on they are 10 a penny now
your the expert on it not me, I a know nothing  8) :o
Stop messing about you know it's called selective amnesia !  ;D ;D
If you read 'Moray's 'Sea of Energy. paper he talks of directing his device at rats where the device actually extracts
'ENERGY' from the Ray just leaving dust, so that would be the environment and EARTH connection.

Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 29, 2020, 09:42:30 PM
Dear AlienGrey I'm waiting for EMJunke response and I don't want my question to him piled  My answer  to your comment is here.
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551370/#msg551370 (https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551370/#msg551370)
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 29, 2020, 11:49:54 PM
Case of EMJunke:
At: https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551371/#msg551371 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551371/#msg551371)
EMJunke posted  nonsense but no answer to my question  in format:
THE ENERGY IN YOUR SELF-POWERED  FREE ENERGY  DEVICES COMES FROM WHERE?
Please  provide the answer  in  listed below format:
1.based on laws of conservation of energy : energy can not  be created no destroyed .
Quote
My EMJunke device takes  energy (In) in form of ..... from ...........than converts this energy from .... and in form of ...... to .... form of energy.
2. this form of energy in My EMJunke device is processed  and
delivered into the  load  in form of........
3. approximated  initial energy  E (In) to output energy  E (Out)  efficiency is:
Final Statement:
My EMJunke device doesn't violate laws of physics
because........( please provide  explanation
I'm not sure if he understands a question?
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 12:16:24 AM
Case of EMJunke:
IN EMJunke forum
https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551380/#msg551380 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551380/#msg551380)

We finally got the answer:
https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551381/#msg551381 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551381/#msg551381)

Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 12:30:15 AM
Case of EMJunke:
EMJunke you posted  nonsense but no answer to my question  in format listed above:
I'm not sure if you EMJunke  or the person responding to me understands my  question?
Is it possible that the answer was formulated from your account by someone who doesn't understand English and uses translator?
Wesley
https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551380/#msg551380 (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551380/#msg551380)
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 12:55:39 AM
stivep
Quote
I'm not sure if he understands a question?
You may be waiting a very long time my friend, lol.

Maybe I can help move the conversation forward because EMJ obviously isn't up to the job.

Quote
My EMJunke device takes  energy (In) in form of ..... from ...........than converts this energy from .... and in form of ...... to .... form of energy.
2. this form of energy in My EMJunke device is processed  and
delivered into the  load  in form of........
3. approximated  initial energy  E (In) to output energy  E (Out)  efficiency is:
Final Statement:
My EMJunke device doesn't violate laws of physics because........( please provide  explanation

My Onepower device takes energy (In) in form of the universal atomic/particle motion and EM waves between all material things(same thing) then converts this energy from atomic/EM and in the form of one kind of motion to another form of coordinated motion or energy ergo... a transformation.

2. this form of energy in my onepower device is processed and
delivered into the load in form of transformed energy from the "Sea of Energy" present everywhere in everything as motion, energy is motion.

3. approximated  initial energy  E (In) to output energy  E (Out)  efficiency is:... Efficiency is in some respect irrelevant, if were swimming in an infinite sea of unlimited energy does it matter that we only transform a fraction of 1%?. Efficiency is an illusion and only the magnitude of the transformation is relevant.

Final Statement:
My Onepower device doesn't violate the laws of physics because everything everywhere is in perpetual motion supported by the laws of the Conservation Of Energy (COE). Energy cannot be created nor destroyed only transformed thus all energy as a perpetual motion that ever was will always be. My proof is that nobody can name one thing not in perpetual motion, motion is energy, ergo everything is energy everywhere on every level. Thus efficiency is a weak abstract at best because if the magnitude of transformation was large but the efficiency low the energy level is still significant. Again...if were swimming in an infinite sea of unlimited energy does it matter that we only transform a fraction of 1%?. A fraction of 1% could be 1 watt or 1000 Megawatts defined not by efficiency but the magnitude of how much energy is transformed and in what context.

You see, it occurred to me early on that many people claim to understand FE, many claim to understand many things however on discussion of there supposed understanding it became apparent to me that almost nobody truly understands the what, when, how nor why of energy. It is an enigma, an apparition in the minds of most people thus when almost nobody can seem to understand something that is my cue to move in that direction. In this respect popularity is not a virtue more so a inhibitor to gaining knowledge and understanding.

The Road Not Taken
Robert Frost

Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth;

Then took the other, as just as fair,
And having perhaps the better claim,
Because it was grassy and wanted wear;
Though as for that the passing there
Had worn them really about the same,

And both that morning equally lay
In leaves no step had trodden black.
Oh, I kept the first for another day!
Yet knowing how way leads on to way,
I doubted if I should ever come back.

I shall be telling this with a sigh
Somewhere ages and ages hence:
Two roads diverged in a wood, and I—
I took the one less traveled by,
And that has made all the difference.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 01:06:38 AM
Case of EMJunke:
Maybe I can help move the conversation forward because EMJ obviously isn't up to the job.
Regards
Thank you very much Very clever ... :)
I would comment it as:
If everything is so unclear and so much unknown than what is known?
and how do you know that you know , and based on that knowledge how can you build device that powers your refrigerator  :)
I'll try to get back to it later.

but first some other news.
After I reposed in EMJunke topic my post was deleted.
and I posted again the same saying that now I'll take picture  of it.here it is:
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 01:20:35 AM
Case of EMJunke:
As I expected EMJunke deleted that post from above too.
I also ask him:
-  is it possible that  someone who doesn't operate English
was using his account  to respond.
Was it possible that this could be a certain group of  people
from some Eastern European country not fully prepared
to answer  technical questions?

EMJunke also removed  my  comment  explaining
reasoning for my very friendly  posting based on "brutal honesty guide"
but I saved copy of it here:
https://overunity.com/18617/rant-caffe-asylum/msg551364/#msg551364 (https://overunity.com/18617/rant-caffe-asylum/msg551364/#msg551364)

Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 01:37:40 AM
stivep
Quote
Thank you very much I will comment it later.but first some other news.After I reposed in EMJunke topic my post was deleted.
and I posted again the same saying that now I'll take picture  of it.here it is:

Wesley, if Chris gets off on deleting everyone's posts not in line with his deranged narrative why would you keep posting?. In my opinion your simply feeding the fire and doing exactly what they want you to... so why do it?. This is gaslighting 101, look at my post on gaslighting because your doing exactly what they want you to, it's predictable.

They say insanity is doing the same thing over and over even when we know the result will always be the same, so why do it?. Intelligence... knowing when were being gamed and refusing to play there game. I get it, being gaslighted is bullshit however being predictable and following along is not the way. In fact we as intelligent people are more prone to falling into the gaslighting psychological trap because we are dependent on the other party being reasonable however when whey are not it's a curve ball. Which is why so many cannot comprehend what's happening. It's a barrage of never ending bullshit we cannot try to keep up with because were trying to analyze one lie as it is told.

In computer terms it is a brute force hack inundating the user with lie after lie until lying becomes normal to us when it is in fact abnormal. So really the best choice is just to tell people like Chris to fuck off because he's a loser peddling lies. It is what it is and there is no reason or debate in it.

Regards




Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 01:50:25 AM
Case of EMJunke:
Yes .
Unfortunately  EMJunke lost  his credibility for me and possibly for most of others here.
His motivation, direction and goal is at no value to me.
I see total destruction and no benefit,

This is my personal opinion.
I don't think  I'm wrong
But who knows.. In some future
he may become a star of  another dimension.
I wish him "the best" /./.
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 02:21:31 AM
stivep
Quote
His motivation, direction and goal is at no value to me.
I see total destruction and no benefit,

That is a reasonable deduction and if we claim to be intelligent then we should recognize when were being gamed by psychological warfare and act accordingly. As I said assuming the other party is intelligent or reasonable is a false assumption until proven otherwise which puts us at a disadvantage. We assume there reasonable and then when Chris throws a hissy fit and starts hurling insults we don't know what to think. At which point we need to start looking at there actions versus the contradictory things they say.

For example he claims he wants to help then continually degrades others as the enemy or subhuman if there not loyal or obedient ... so how does that help, to what end?. He's a fucking loser parroting trumps narrative of abuse to delegitimize any valid argument based on facts which is generally always the case in my opinion. At which point the facts mean nothing and it devolves into a pissing contest of who can hurl the best insults to gaslight the most people. That is the whole point, to degenerate the conversation away from the facts and turn it into a divisive contest of false beliefs. Basically he said, she said, believe me or your the enemy kind of bs.

It's a joke and it's juvenile however as we can see it seems to have some effect in many area's such as politics. My point is if we are intelligent then we should recognize when were being gaslighted and act accordingly. Don't fall for it, if were better than that then we should act as such otherwise were part of the problem not the solution.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 03:43:10 AM
Case of EMJunke:

for me it looks like:
-EMJunke  cut  some old Verpies text 
-
EMJunke  composed non existing in real time(today) conversation
-EMJunke   altered and removed   (information, a document, or evidence)and my own  comments , so as to mislead.  - creating  unrealistic   image of other people approval or interaction.
Note: but  of course having administrator rights EMJunke may correct and alter any text tomorrow..
.
or make his thread to look like a very busy place by posting selected old comments
with recent dates.

EMJunke:
Quote
Sorry, I took offence to the other post, until I saw it was on the wrong thread.
Australian born  should  have excellent English skills :
  - the word "offence"  is written  with error - should be offense
     are you sure EMJunke  that it was not written by  some Russian guy?
   Link: here (https://overunity.com/18464/partnered-output-coils-builders-group-moderated/msg551312/#msg551312)

 
Copy of my original comment is here
 (https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551401/#msg551401)Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: gyulasun on September 30, 2020, 01:14:04 PM

EMJunkie has just deleted my post from his thread (I attach the picture of what I wrote). 

He accused me of signing up a fake account to access information here: 
https://overunity.com/18617/rant-caffe-asylum/msg551324/#msg551324 (https://overunity.com/18617/rant-caffe-asylum/msg551324/#msg551324)  I quote the revelant part: 
"The thread was private, and Gyula signed up a fake account to access information, already covered. Guyla fell right into the most obvious Honey Trap! EXPOSED!" 

This is libel and if he does not want to clarify and apologize I may consider to bring an action for libel against him, Chris Sykes, and Stefan Hartmann, the owner of this forum for letting Chris brake forum rules several times already.

Gyula
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 02:36:40 PM
You should also be aware 5 years ago Chris
And Friends hacked this forum


When he was moderated for libel
Here


 the forum has been hacked again
Ask member Floor


Chris wrote many similar libels here against
Members
And for years has been under delusion that
Members here ( or anywhere) who are unable
To replicate are evil doers


This he writes while playing Decade long Games of FE suppression and stepping over the dead
And starving to keep score on membership etiquette at his forum!


He actually has such a thing


So all are monitored and “possibly “ hacked at his forum
He has written MANY times he keeps “files”on persons!


Now you know he is doing this to all there (Gyula)
And he is completely wrong again
He wrote here that he monoitoref OVerunity Research forum for 5 years
Bragged to me in PM he had spy there ( I laughed and wrote back “it’s open Source forum “
No need to pretend your stealing .,, it’s gift !!


Stefan knows he hacked with friends last time
They changed old posts for fun when he was banned
For libel ...and Chris also had added Stefan (Prior to his Ban) to his list of
Evil FESuppressors


You people signing up at Aboveunity need to be careful (Gyula example)
Chris said it was not him who hacked here... just his very good friend ...he just benefited
Like a getaway driver at a bank job I suppose?


His very good friend did send me bragging pm here to brag about
Placing Chris new posts while Chris was moderated for libel


His very good friend has much hate in words he wrote to me
Worst I ever read here !
——///——////——-/////———-

Chris qualifies as biggest FE suppressor on planet ATM ( his recent bragging again here)


For a decade he writes/brags of FE


While humanity and our planet pay a horrible price He and his followers
Make jokes and “laugh all the time “ ( his words many times here) at those struggling
To understand his walls of text and math and etc etc


Simple solid state COP 2 crumb for humanity
And he he will not help
He Still needs to play this game and watch the world suffer and people
Die for lack of FE


Ps
I see Chris posted link from his overunity research
Surveillance project here


Wher Smudge wrote partner coils were gain mechanism


This needs clarity and perspective


Chris has written libels against Cyril here too
And Partzman and Graham Gunderson as well.


And this surveillance link he posted is huge completely out of context
Text


I will be getting more facts on this post he shared here


I hope I do not get banned yet much more needs telling here!!
However
Chris has spent a very long time harming and trying to harm
Members here (and this community)


Writing lies like he just wrote about Gyula !!


Gyula A true saint here and Chris writes lies to defame him publicly !













Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 03:32:10 PM
Thank you Chet.
I didn't conflict or interact with  EMJunke so much  for years.
however opposing characters from the past might have been him using other names.
_____________
The master of destruction.
--------------------
EMJunke could  answer simple question in format :
 https://overunity.com/18617/rant-caffe-asylum/msg551384/#msg551384
and everyone would be happy.
He decided  not to answer  and  removed  comments.

should I call him with names?
should I look at  his possible motivation origin?
or should I ignore him?
We  don't want  elements that may have  destructive parentship supporting them 
 What is your opinion ?
Wesley

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 03:44:58 PM
Ramset
Quote
You should also be aware 5 years ago Chris
And Friends hacked this forum
When he was moderated for libel
Here
the forum has been hacked again
Ask member Floor

Stefan knows he hacked with friends last time
They changed old posts for fun when he was banned
For libel ...and Chris also had added Stefan (Prior to his Ban) to his list of
Evil FESuppressors
You people signing up at Aboveunity need to be careful (Gyula example)
Chris said it was not him who hacked here... just his very good friend ...he just benefited

Sounds like a government/corporate funded operation not unlike many fossil fuel sponsored foundations. They appear to support causes like free or renewable energy however the goal is to create chaos, fear and doubt. It's pretty easy to spot and if they have anything to do with far right political beliefs you can be pretty sure there against free or renewable energy. It's basically there modus operandi, pro fossil fuel, anti free and renewable energy.

I thought EMJ was just a troll however if what your claiming is true then there may be much more going on here. The fact remains that like the "trump effect" everything has quickly degenerated into name calling, division and chaos. I suspect this is being done on purpose to destabilize western civilization and much of it appears to be coming out of Russia.

As the new saying goes... what a shit show.

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 04:02:04 PM
My opinion


For the very first time ever
A person has stepped forward with all details
To replicate Chris COP claim


And person is wonderful honest (IMO ) man


Wesley I know you have written many times here about your reasons
For investigating FE tech !


You have always written “”Science “”
As your motivation


If I may be so bold to say
At some level
You are one of us ... and will consider “outside the box”
Claims


There is much harm to this community being caused by Chris
Here he comes to an open source venue with his torture chamber forum format
Keeps score there on victims performance


And here in open source forum he holds carrot of life and death as bait to get more aboveunity forum  membership and drag this out as long as he can!(while doing surveillance on his membership)


A device he claims And his companion Fritz too) ...takes 10 minutes
To build few dollars in parts ... is solid state ... and makes twice the output
Over input!


IMO
Captain loz work should be front and center
For all to build such a device


And for clarity Chris will weaponize your offer of money


I know you wrote years ago there was a man you knew who would pay large sums if
Device was open sourced


Sorry working here
But I wrote enuff for now





Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 30, 2020, 04:07:59 PM
   OK, so how did EMJ get back into this forum??? And, are you all just going to let him run the show???  Into the ground...and it's working. 
   I can't believe after all this, that there are even guys actually trying to see if EMJ's circuits produce OU.  How gullible is that?
 I hope that won't take another 10 years.
   
   EMJ comes here (after being banned), insults everyone, including Stephan, shows nothing that works, takes months of our time while listening to his whims. And finally, offers nothing, but then does not leave, but just keeps at it.   What's with that???
   Captainloz shows a circuit that is NOT OU, as some kind of test. When you can clearly see that there is no OU there. Even without any readings. Yet, the input is 18w to light those little bulbs. So, ramset thinks that that device should be front and center? WHY.
 Any way, Ramset, why don't you build EMJ's 10 dollar, 10 minute circuit, and show how well it works. Since you seam to have some faith in that simple device, and you still seam to think that it should be front and center. Then you will be saving lives, etz... as well. Or, do you not do simple replications? Which it seams like you alone have faith in, enough to fall into his trap.
   Or,  lets just wait for the other guys to show that there is nothing to EMJ's circuit, or Loz, but a waste of time and effort.
   Better known as a scam.   
   Allowing (or inviting EMJ) back into this forum is like letting a snake live in your house.
     Time will tell... and already has.  Fool me once, fool me twice...
     NickZ   
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 05:16:55 PM
Nick
Do you do your own dentistry
Or God forbid you need a specialist


Brain or other surgery?


Should I dismiss the surgeons and tell them
“ I got this”


Please stop dismissing itsu and others who wish to
Understand (partzman too)


Chris has taken over forum for 5 months now and will continue
Regardless
I am just hoping since we seem to have no choice anyway
To have one of the best ....and only builder here who shares everything
Always no secrets or “I know something you don’t know taunts”


Give it a try


Or you prefer another decade of this crime against humanity
As well the open source members here?







Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 30, 2020, 05:24:53 PM
    Ramset:
   Why don't YOU give it a try.  Was it you that let him back?   I wouldn't give the guy the time of day. Even if his little circuit worked, which it doesn't.
   You my friend are a bad judge of people. Sorry to say, and you don't listen to what we've been telling you lately. 
    So, I will leave you all, for now. This has gotten too out of hand for me to continue, like this, with no OU nor self running in sight.   
   NickZ
   
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 05:25:50 PM
      Allowing (or inviting EMJ) back into this forum is like letting a snake live in your house.
     Time will tell... and already has.  Fool me once, fool me twice...
     NickZ
Dear NickZ.
Your dedication to this forum was  proven for so many years.
Your persistence and  even challenging me from time to time was absolutely positive behavior.
Disagreement made us performing and delivering  for others to benefit from that.
I do thank you  for that.

Wesley

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 05:42:30 PM
   
   EMJ comes here (after being banned), insults everyone, including Stephan, shows nothing that works, takes months of our time while listening to his whims.
   Or,  lets just wait for the other guys to show that there is nothing to EMJ's circuit, or Loz, but a waste of time and effort.

   Better known as a scam.   

   Allowing (or inviting EMJ) back into this forum is like letting a snake live in your house.
     Time will tell... and already has.  Fool me once, fool me twice...
     NickZ

For the word SCUM WhatIsIt was banned!

It seems that WhatIsIt was right.

And Chris calls this forum and its owner Nazi,
and all of us Nazi Schills, servants.

And Chris is not banned.
Does this means that this forum is Nazi nest?
I am confused?
Can someone explain this?

WhatIsIt is my dear friend, and I dont know what to think?

Quote from: Emjunkie

 Some here are so DUMB!

 They are

NAZI Troll Shills,

so dumb they don't even know they are working for the

Nazi Party!

 Clown Idiots!

 Best wishes, stay safe and well in these dire times,
    Chris Sykes
 
 


Which means that Stefan is Nazi and we all work for Nazi party!


Can someone explain this to me and all members?

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 05:44:26 PM
Nickz
Quote
OK, so how did EMJ get back into this forum??? And, are you all just going to let him run the show???  Into the ground...
   I can't believe after all this, that there are guys actually trying to see if EMJ's circuits produce OU.  How gullible is that?
 I hope that won't take another 10 years.
   EMJ comes here (after being banned), insults everyone, including Stephan, shows nothing that works, takes months of our time while listening to his whims. And finally, offers nothing.

I would use an analogy, trump also promised the world and a majority were desperate enough to look past the fact he is a con man, a pathological liar and completely incompetent. Now the U.S. has turned into a dumpster fire with hatred, division, violence, country wide protests with the economy and the pandemic becoming a train wreck. In my opinion the embarrassing shit show of a political debate last night highlights the problem. While everyone was so preoccupied with picking sides they forgot to notice that they were all being gaslighted and everyone lost. The right and left both probably thought they won however the rest of the world was looking on thinking all these people have lost there god damn mind.

Based on the new information Chet disclosed I would bet EMJ's dog and pony show will follow the same pattern of behavior as above. Look at the facts... the gaslighting, blatant lies, division, a complete lack of real facts and dehumanizing others. The same pattern of behavior is present and for some reason most people just keep falling for this bs.

So it's important to understand there are forces at work wanting to destroy everything we value by creating division and chaos. That is there goal and picking one side or another has nothing to do with it because both sides will lose.

Regards

Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 05:47:45 PM
No Nick
It was not me who let him back
He apparently told Stefan he would
Start an open source builders topic and share!


I actually never believed he would open source
However he asked me to invite Smudge
And said he had many who would build
I thought he was setting a trap but need this bs resolved.


I have known for years that he tells persons
That people hide OU here Smudge is big piece of his
Mantra!




And I know it is a lie
And now he built a forum on this lie


And has many believing it too


So no Nick
I am not interested in allowing libel and slander to win the day


And for clarity he has lumped most here into
Same Evil garbage group


Here we have Captainloz COP2 solidstate “anchor of all claims forward”


And actually Nick
Sorry I do believe 1000%
No stone left unturned


The cost to humanity is too great to be
Cavalier and dismissive


Chris has Zero benefit to humanity 10yrs of watching world suffer while he plays
torture membership game)
And all about destroying this forum
And growing his forum.

He cares not for the good people here
Who dedicated their lives for this cause
Groundloop and Otto and ION and Pese
And many more...


Makes me sick

 A blasphemy against community !


There is much more I will write


Hoping Captainloz has the ability to share
And “IsThere “?? truly a gain hiding in there
I hope soo!!


And yes I am still going to ask Cyril to clarify his gain remark!


This needs healing not more wounds
Gotta get back to work here




Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on September 30, 2020, 05:53:37 PM
   Wesley:   Yes, well thanks for that. 
    I am into protecting our forum's integrity here, and also being objective, and impartial, when possible.
    I am also wondering why EMJ can do whatever he likes "regardless". 

    NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 05:57:01 PM
Ps to V8
Whatsit was banned for 1/10 th of Chris libels here
And now you write a reason


Stefan is very vulnerable to lawsuits as are most forum hosts
Liability goes top down


Chris needs to remember that and stick to subject
And stop libeling people


Some are truly fed up beyond forgiveness
Nick “regardless “


some think Chris threatens lawsuits and holds this over Stefan
For libel written now corrected as typo by V8 ?


I will try to reach out for Stefan


But not about banning
Chris has been trying to get banned for months


It has not worked
Now we need Captain to save all ( including Chris)
Win win either way







Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 06:06:19 PM
v8karlo
Quote from: Emjunkie
Quote
Some here are so DUMB!
They are
NAZI Troll Shills,
so dumb they don't even know they are working for the
Nazi Party!
Clown Idiots!
Best wishes, stay safe and well in these dire times,
Chris Sykes

It begs the question... does this sound like an intelligent person who wants to help others?. Does this sound like a person anyone could ever trust given what was said?. Not to mention the fact that like trump his best friends one day were the enemy the next when they refused to be obedient and loyal?.

Nobody could possibly be naïve enough to believe this nonsense could they?. In my opinion this sick post by EMJ speaks for itself and there should be no confusion of his intent.

I would also point out that this post by EMJ is also the reason so many FE researchers are so hesitant to disclose anything. Can you imagine what could happen if anyone like this was empowered with advanced technology?. Jesus christ, he would not just be gaslighting and hacking people he doesn't like he would probably be doing much worse. I rest my case...

Regards


Title: Re: RANT CAFFE ASYLUM
Post by: ramset on September 30, 2020, 06:17:18 PM
There are good people who have been
Lied too
Chris built this lie


His membership deserve the truth
Yes Chris does seem to have a few anchor
Members that help him torment


Google Rick Friedrick and “aboveunity forum
Steals my videos and rebrands as their own”



Title: Re: RANT CAFFE ASYLUM
Post by: Smudge on September 30, 2020, 06:29:16 PM
Chris Sykes has used an unscientific term "Partnered Coils" that perhaps means something special in his mind.  He quotes every FE experiment he can find that uses more than one coil as "evidence" for his claims, as though this Partnered Coils idea is some form of breakthrough for which he can claim the credit.  (I remember someone else using a similar non scientific term for magnetic paths, like coupled with.)

Some years ago he posted on overunityresearch.com and I responded with the suggestion that a pair of bucking coils that are widely separated on a core would have a propagation delay from one to the other, since the magnetic coupling from one to the other will travel as a wave of finite velocity.  When that delay is taken into consideration the math shows that such a scheme could offer overunity.  If so the anomalous energy would come from the atomic dipoles within the core that are responsible for its ferromagnetic property.  I still think that is a possibility.  That is not an endorsement of all his Partnered Coils claims, although he offers a link to a single post of mine as though it is such an endorsement.

As a matter of interest he shoots himself in the foot with his selected phrases from other peoples work.  Not long ago he was vehemently denying that Floyd Sweet used conditioned magnets, yet he has just recently quoted from one of Sweet's papers where Sweet clearly states his use of conditioned magnets.

Smudge
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 07:18:19 PM
v8karlo
Quote from: Emjunkie
It begs the question... does this sound like an intelligent person who wants to help others?. Does this sound like a person anyone could ever trust given what was said?. Not to mention the fact that like trump his best friends one day were the enemy the next when they refused to be obedient and loyal?.

Nobody could possibly be naïve enough to believe this nonsense could they?. In my opinion this sick post by EMJ speaks for itself and there should be no confusion of his intent.

I would also point out that this post by EMJ is also the reason so many FE researchers are so hesitant to disclose anything. Can you imagine what could happen if anyone like this was empowered with advanced technology?. Jesus christ, he would not just be gaslighting and hacking people he doesn't like he would probably be doing much worse. I rest my case...

Regards


Chris claimed that Stefan is "Nazi" !
Why Stefan supports Chris on this?

Can anyone can clarify this?

I am sensitive about Nazi question, because I am from Croatia,
where Nazi's cut of heads of my relatives.
Butcher them for no reason.

I am not Nazi servant, never will be!

Never!


Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 07:27:27 PM
Quote from: Emjunkie
Some here are so DUMB!
 They are


NAZI Troll Shills,


so dumb they don't even know they are working for the


Nazi Party!


Clown Idiots!


Best wishes, stay safe and well in these dire times,
    Chris Sykes

 


What does this mean?

That I dont know that I work, post for Nazi Stefan?

What a fuck this mean?

I am not Nazi servant!

You can ban me, you can moderate me, but I will never be Nazi servant!

Title: Re: RANT CAFFE ASYLUM
Post by: onepower on September 30, 2020, 07:48:12 PM
Ramset
Quote
Chris needs to remember that and stick to subject
And stop libeling people

some think Chris threatens lawsuits and holds this over Stefan
For libel written now corrected as typo by V8 ?

Libel is based on intent and works both ways, as such if any judge was ever shown many of EMJ's posts I can assure you it would be EMJ being fined or doing time. In Canada much of what EMJ said is considered hate speech and incitement and he probably could do time in prison. There is also the problem of foreign jurisdictions which is why EMJ is just peddling more bs in my opinion.


Quote
It has not worked
Now we need Captain to save all ( including Chris)
Win win either way

Optimism is fine, blind faith not so much.

Why just the other day I was thinking about strolling down to the homeless shelter to get some financial advice then the psych ward for medical consultations. Hell, maybe go vote for a psychotic, compulsive liar who cheats on his taxes and fails in business with no political experience to lead my country... I mean what's the worst that could happen?.

Uhm, wait I think we all know what can happen as the U.S. is on the verge of a civil war and our planet has basically turned into a dumpster fire. Seeing that blind faith has turned into a complete shit show maybe we could give intelligent decisions based on sound reasoning a try?...

Regards
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 09:03:18 PM


I will ask the same question Stefan did.

Where are the victims of Chris "Scam"?

Where are they?

For 10+ years researchers try to replicate Chris device.
It cost money, and it costs lots of time (which is money).
Are you not seeing victims yet?

If you dont, spend another few years investing in Chris device,
then, for sure you will start to see victims!

If you can not see victims even after that period,
find a closest mental institution and pay your vacation there.


If all of that its not enough for you, then there is no word, term,
for your condition.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 09:22:37 PM



In 10+ years Chris did not make even one (1) device.
Because he did not make any, he can not measure what he didnt made!

Can it be simpliest than this?

No device, no measurements!
Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 09:25:10 PM
look to the next  post of mine.
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 09:26:28 PM

And now, I will be accused because I am teling the truth!

So, accuse me.

Who will be the first who will throw the stone?


(personally, I dont care anymore.)


Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 10:05:12 PM



Emj, you are so boring that is torment to listen to your stuff anymore!
It explains nothing, it shows nothing!




...The Sound of Arrogance echoes through the universe at the speed of Light!The very same dissenters that said the Wright Brothers could not fly! The very same!Take the name of every dissenter, mark my words, they will end up being forced to eat their words! Some even imprisoned for their active part in keeping this Technology from you for many decades!Even in the light of evidence, they still try the best they can to stifle truth! The input Coils does send Energy back to the input Power Source, here is a small, very simple, not difficult at all example:Best wishes, stay safe and well in these Dire Times,   Chris SykesP.S: They probably don't know about the Four Quadrant Argand Diagram and how this works! 1 * -1 = -1 right? Work it out! It is not hard or complex! 1.28 - 0.0957 / 2 = ? Forward, and Back, approximately....So many Dumb experts here!


Title: Re: RANT CAFFE ASYLUM
Post by: stivep on September 30, 2020, 10:53:48 PM
I CORRECTED the link:

I thought EMJ was just a troll
Can anyone can clarify this?/..  for full text click link
   are you all just going to let him run the show??? 
   EMJ comes here (after being banned), insults everyone, including Stephan, .
     
EMJunkie has just deleted my post
He accused me ..//Gyula
    I am also wondering why EMJ can do whatever he likes "regardless". 
Makes me sick
verpies asking EMJunke:
What was Itsu banned for ?
His behavior alone tells the whole story. /../ Sykes who has nothing.
To EMJunke
think before you move.
EMJ,
 you rant and insult everyone like a spoiled little brat who doesn’t get his way so you’re taking all your toys and going home! 
What good is it?  Just a waste of time as he has demonstrated NOTHING IMO.  We need to ignore him and his rantings!
slinging insults,
I forgot there are certain conditions where the patient is incapable of embarrassment.
In my line of work I saw many better than you.
But I never saw so badly behaved person as you.
Too much time Chris, your lie is huge now,
so huge that nobody can digest it.
Just convince me that you are not just like a simple piece  of Russian  currency - ruble  devastated by degradation  of all values.
Wesley

Crazy explanation of EMJunke role here Let's take it "humoristically"  but who knows :)
That maybe  not  as crazy at all?
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551435/#msg551435 (https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg551435/#msg551435)
Wesley
Title: Re: RANT CAFFE ASYLUM
Post by: citfta on September 30, 2020, 11:48:38 PM
Haven't any of you raised any children?  The easiest way to stop a child that is in the habit of throwing tantrums is to just ignore him or her.  Then they get tired of not getting any attention and stop with the antics.  Or in this case will probably just go away.  As long as we keep posting about Chris and his antics he is getting the attention he wants.  If we stop he will get bored and go away.  I stopped reading his posts long ago when I realized he had nothing to offer.  Don't waste your time reading his posts or responding and he soon will go away.  Or at least you can concentrate on more important things than an egomaniac that is starved for attention.
Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on September 30, 2020, 11:51:37 PM
Haven't any of you raised any children?  The easiest way to stop a child that is in the habit of throwing tantrums is to just ignore him or her.  Then they get tired of not getting any attention and stop with the antics.  Or in this case will probably just go away.  As long as we keep posting about Chris and his antics he is getting the attention he wants.  If we stop he will get bored and go away.  I stopped reading his posts long ago when I realized he had nothing to offer.  Don't waste your time reading his posts or responding and he soon will go away.  Or at least you can concentrate on more important things than an egomaniac that is starved for attention.


You are right!
And it becomes boring, like bad commercial!
Yea, OK!

Title: Re: RANT CAFFE ASYLUM
Post by: NickZ on October 01, 2020, 04:12:39 PM
   Not just boring, but very disruptive to this forum, as well. 
   Makes me wonder what's going on. To let guys like EMJ, and Rick F, insult everyone and blow it for the rest of us.
While the Admin, is too busy to deal with his own forum now, after letting him back when he was banned previously.
EMJ has been trying to get banned, but no one will give him a hand. Isn't it sad.
   The only point that I can see of any of this unnecessary bull shit, is money. What people will do for it...   We can now see what a waste of time this has all been, for us. With not the slightest bit of OU, from any on it.
   You want more?...
   NickZ
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on October 01, 2020, 04:41:39 PM
Yes I personally want every bit
Until exact replication can be shown


And any gain whatsoever that will survive!


We see that Smudge explained his comments
Taken completely out of context for five years to feed lies
Against members ( Chris quote “see they hide for themselves and speak open source “)
1000% lie and has hindered community greatly
A forum was built on this lie( used to rally persons against great evil)
We see Brad dragged along as proof !!
We see Graham dragged out as proof !!


They have less than Zero to do with Captainloz
Build


As Chris already wrote “ nobody has ever done this”


Let’s set Brad aside (and Chris 24/7 365 doxing effort on Brad and his family aside  (Chris posts
Brads private home and personal info for very very long time here at his forum ( Disgusting)


Let’s just look at Chris solid state work
Which Captainloz is building with a two times output
Claim over input


PLEASE let Verpies and Itsu’s Captainloz replication continue!!


The world and forum needs this ( he hides it for a decade from world
In cryptic walls of text and images)



And we need the answer !!


Chris writes “the whole world is watching “
—-://///———-
I certainly hope so !!


The whole world has needed this forever IMO


PLEASE Help the builders replicate your build Captain ??


https://overunity.com/18638/captainloz-replication-discussion/msg551468/#new (https://overunity.com/18638/captainloz-replication-discussion/msg551468/#new)








Title: Re: RANT CAFFE ASYLUM
Post by: lancaIV on October 01, 2020, 06:13:18 PM
From DE29812556 Anton Wallner
to citing documents

EP1033807 Klaus Amann " energy converter" :
Output 1500 Watt and input 800 Watt ~ C.O.P. 1,875 , not far from CaptainLoz his ' measured' 1,9
Sincerely


Title: Re: RANT CAFFE ASYLUM
Post by: ramset on October 01, 2020, 09:00:53 PM





Quote from: Emjunkie


“”Some here are so DUMB!
 They are


NAZI Troll Shills,


so dumb they don't even know they are working for the


Nazi Party!


Clown Idiots!


Best wishes, stay safe and well in these dire times,
    Chris Sykes””

 [/font]

What does this mean?

That I dont know that I work, post for Nazi Stefan?

What a fuck this mean?

I am not Nazi servant!

You can ban me, you can moderate me, but I will never be Nazi servant!


This kind of post from EMJ
Is typically removed before reported to admin on his moderated
Topics ( game he plays like infant)
100’s similar over the years
And many ,much ,much worse 


@Lanca
If you could provide more info ?
Is it as simple as Chris “solid state ““10 minute build “
“With few dollars in parts “


There is one build on bench of itsu
(Well two actually... his NMR Smudge
Replication too
 ( with help from Conrad
And Verpies and.....?maybe more will
Help when it’s open source like this?


However
Captain loz first time ever shared COP 2 gain
Replication of Chris solid state “one unit
In “”two units out” aboveunity” claim!


The world desperately needs this !!
Now more than ever !!


This would have saved millions of lives this last decade
Read Stefan’s mission statement above!


Yet Here the builders struggle ?


Perhaps when others start to replicate at aboveunity forum ?
They too can help open source this solid state super simple COP2
Claim
https://overunity.com/18638/captainloz-replication-discussion/msg551468/#new (https://overunity.com/18638/captainloz-replication-discussion/msg551468/#new)

PLEASE
Enuff games !!
We need this yesterday!!( 10 years ago


Ps
Lanca
If I don’t see you again
Was nice knowing you
(Might get banned for telling
Truth here

Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on October 02, 2020, 12:15:47 AM
Ramset, old buddy, let me help you out a little, on color's thread he has a you tube link (I forget witch one now
as i had to drop everything to attend to some thing more pressing, as one does) any way, the link goes to
another build but not capt,loz but it wasn't too different strange that, well the builder was saying
unless the pipe is 2 '' (inches in dia the phenomena wont work and it not so much the turns being accurate
ether as winding's having the same mass is!

So you need a scales and a way of selecting different wire Dia

But all this i have said will be water of a ducks back and some will say WTF do i know about any thing  ;D ;D
Some of the time they might be right Ha,Ha.

So in some ways I just don't bother in fact some prominent guys on here and departed didn't like me asking questions
and got me kicked off just by trying to get at the truth. Guys in white coats don't know everything.
The BBC did a documentary a while back about laws of ENERGY conservation that can't be broken and then Tesla came into it.

 8) 8)
Title: Re: RANT CAFFE ASYLUM
Post by: ramset on October 02, 2020, 12:22:04 AM
AG
If I go to colors thread


I might have to stay for dinner...
To much to do here myself


Please ask him to find it ..and any others
That can help


Thank you
Chet
I owe you a cheeseburger or some chips
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on October 02, 2020, 12:30:15 AM
Ramset, old buddy, let me help you out a little, on color's thread he has a you tube link (I forget witch one now
as i had to drop everything to attend to some thing more pressing, as one does) any way, the link goes to
another build but not capt,loz but it wasn't too different strange that, well the builder was saying
unless the pipe is 2 '' (inches in dia the phenomena wont work and it not so much the turns being accurate
ether as winding's having the same mass is!

So you need a scales and a way of selecting different wire Dia

But all this i have said will be water of a ducks back and some will say WTF do i know about any thing  ;D ;D
Some of the time they might be right Ha,Ha.

So in some ways I just don't bother in fact some prominent guys on here and departed didn't like me asking questions
and got me kicked off just by trying to get at the truth. Guys in white coats don't know everything.
The BBC did a documentary a while back about laws of ENERGY conservation that can't be broken and then Tesla came into it.

 8) 8)






AG is Correct, in part!

The Mass of the Coils is something that would be nice, to be the same, 100 turns of 1mm wire, should be equal to 4 turns of 10mm wire, x = y in Mass.

Basically, Resistance/Impedance of the Wire, is what this comes down to. Ask why? Why do we need to look at the Coil Impedance? What's the Delta of the Coil if Impedance Changes by 3?

This is not critical, but it is desired!

Tariel Kapanadze had the same: https://www.youtube.com/watch?v=O7bOBKN9qA0

AG, you have many more answers than you may realise!

Best wishes,
   EMJ

Title: Re: RANT CAFFE ASYLUM
Post by: v8karlo on October 02, 2020, 12:49:16 AM

AG is Correct, in part!

The Mass of the Coils is something that would be nice, to be the same, 100 turns of 1mm wire, should be equal to 4 turns of 10mm wire, x = y in Mass.

Basically, Resistance/Impedance of the Wire, is what this comes down to. Ask why? Why do we need to look at the Coil Impedance? What's the Delta of the Coil if Impedance Changes by 3?

This is not critical, but it is desired!

Tariel Kapanadze had the same: https://www.youtube.com/watch?v=O7bOBKN9qA0 (https://www.youtube.com/watch?v=O7bOBKN9qA0)

AG, you have many more answers than you may realise!

Best wishes,
   EMJ


Another riddle?

To buy time! Pretending that you know?

And you want to help humanity? Open source?

This is not only boring, but disgusting!


You will fall one day, big time.


Title: Re: RANT CAFFE ASYLUM
Post by: AlienGrey on October 02, 2020, 02:28:58 AM
Why change the habit of a life time ?

Why not Stop blaming others and make your your own way in life
before it be comes a real problem.
Title: Re: RANT CAFFE ASYLUM
Post by: EMJunkie on October 02, 2020, 04:18:13 AM

Another riddle?

To buy time! Pretending that you know?

And you want to help humanity? Open source?

This is not only boring, but disgusting!


You will fall one day, big time.






Whoops, Foot In Mouth Again!






Quote from: Tesla Coil Design, Construction and Operation Guide link=http://www.teslacoildesign.com/design.html


The length of the secondary coil is used to calculate the wire weight. In the past it was thought that the secondary coil wire length should match the quarter wave length of the Tesla coil's resonate frequency. However, it has since been determined that it's unnecessary.



Quote from: Tesla Coil Geometry and Cylindrical Coil Design link=http://www.am-innovations.com/tesla-coil-geometry-and-cylindrical-coil-design/

From further investigation by others, notably Dollard[5,10], where the density of the conductor in the primary and secondary is the same, (e.g. for a primary and secondary both with copper as the conductor), equal volumes of the conductors can be considered equivalent to equal weights of the conductors, and has been found to apply best when working at lower frequencies where the skin effect does not have a significant effect on the impedance of the conductor, e.g. when working with normal copper or aluminium conductors at a frequency < 3000kc. At higher frequencies where the skin-effect can dominate the impedance of the conductor, balancing the bounding conditions for the two fields of induction can be better accomplished by equal surface area of the conductors.







I think the people here, that know nothing, could be a bit quieter and try to learn something, what does everyone else think?

Learning something valuable is better than constantly listening to Dumb is it not?

Grow, Evolve, Unite, Share and Love Each Other! Please try!

Best wishes,
   EMJ
Title: Re: RANT CAFFE ASYLUM
Post by: hartiberlin on October 02, 2020, 04:45:47 AM
Well, I am getting many emails that here is going on only libel and flame wars...
As Chris has its own forum, maybe it would be better, if he will continue with his stuff only on his own forum...
Well...so I will close his thread and link to his own forum...
http://www.aboveunity.com/thread/partnered-output-coils-1/