Free Energy | searching for free energy and discussing free energy
Solid States Devices => solid state devices => Topic started by: BorisKrabow on July 26, 2020, 07:55:16 PM
-
Hi ! My humble attempt at creating a solid state device . :)
Technology : Exposure to one magnetic pole on the midpoint between the identic poles of magnets .
Description : The magnetic field is easier to control outside the ferromagnetic . Air is good for this .
We have two air coils placed between the magnets . The magnets are facing each other with the same poles .
A ferromagnetic modulator is located between the air coils . The ferromagnetic modulator is made in the form of a grid.
The ferromagnetic modulator has a coil that acts with one magnetic pole.
Estimated results : a small impulse of the modulator causes large fluctuations in the magnetic field in
the air coils .This leads to the receipt of electricity much more than was expended .
Addition : the waveform for the modulator will be found using tests
Design changes are possible .
P. S. I use Google translate. There may be distortions during translation. I apologize in advance .
Best regards,
Boris
-
Hello ,
Device variant with increased reliability . This design allows parts to be added to improve survivability.
What is it for ( a little humor )
If this generator is installed on an interplanetary space probe . And there is a long flight
Earth - Saturn - Pluto - Nibiru ... ;D ;D it will take over a hundred years . You can be sure that the little green men will receive our device in excellent condition . ;D
Best regards,
Boris
-
MY VERSION.
-
Very clever Boris thank you a lot for sharing!!!
You trap magnet's flux inside your ferro modulator by demand, affecting this way the flux that pass through your coils at 90 degrees!!! wow
-
MY VERSION.
Hi seychelles ,
nice design thanks . I want to share the source of my inspiration . Patent US3879622A John W Ecklin 1974 .
Best regards,
Boris
-
THE MODULATED COILS AND THE OUTPUT COILS
ARE PARTNERED PAIRS. OPPOSING FIELDS OR BUCKING. IF YOU OBSERVED A MAGNET
FIELD FLUX PATH THEY ARE LIKE LINES CONNECTING NORTH AND SOUTH
POLES. THE LINES FLUX PATHS OPPOSE ONE ANOTHER.
-
SO THE IDEA IS THAT THE STEEL STRINGS ACT AS A CONDUIT TO THE OPPOSING PERMANENT MAGNETS FLUX LINES.
AND AS THE STEEL STRINGS START VIBRATING IT WILL SET UP EMF STANDING WAVES HENCE INDUCING CURRENT IN
THE PICKUP COILS. THE FREQUENCY OF THE
MODULATING COILS HAVE TO BE CONTROL BY A PHASE LOCK LOOP CIRCUIT.
-
Very clever Boris thank you a lot for sharing!!!
You trap magnet's flux inside your ferro modulator by demand, affecting this way the flux that pass through your coils at 90 degrees!!! wow
Hi Jeg ,
Thank you.
Best regards ,
Boris
-
Thank you Seychelles! Very inventive design! The creativiness went in an other state ;)!
-
Hi Seychelles ,
This is my design of your design ;D ;D
Best regards,
Boris
-
If you take it seriously, then I must say
the field of a permanent magnet located in a ferromagnetic requires a lot of energy to be controlled by an electric coil .
this is the main reason for the failure to find free energy. For this reason, the best researchers admitted defeat. this has been repeated for decades.
To solve the problem, you need to take extraordinary measures .
-
Hi Seychelles ,
This is my design of your design ;D ;D
Best regards,
Boris
You and I created a fantastic design . The air gap is adjusted to make the system unstable . Now the slightest fluctuation of the magnetic field in the modulator will set in motion an avalanche of magnetic field !
And voila a whole sea of Overunity ;D ;D .
-
The air gap is adjusted to make the system unstable
Great key point!!! Seems that you have mastered this idea. Well done and thanks a lot once again!
-
Or the air gap is the water channel in magnetic air coil electrolyzer or MHD or MED !
Adjustable permanent magnets with electromagnet combination !
Variable mmf and emf device
Whom interests John C Ecklin his work will probably also interests William J Putt his ouevre !
-
" ..... Whom interests John C Ecklin his work will probably also interests William J Putt his ouevre ! "
Hi ! LancaIV ,
I just looked at patents William J Putt . He has good ideas .
Maybe I'll make one design ;D
Best regards,
Boris
-
Hello ,
It's time to tell more about the design of MAG 1. ( picture at the beginning of the topic MAG1_2.jpg )
The design of MAG 1 contains many effects that allow you to achieve free energy.
The modulator is located in the Zero Line of the Magnetic Poles ( ZLM ),
located there to avoid the influence of magnetic fields .
To simplify the description, it will be like this: Lenz 1 meets Lenz 2, but since they have the same magnetic pole, they are repelled from the Zero Line. This makes the magnetic field even stronger move through the air coils and generate more electrical energy in them.
This phenomenon will occur with a particular modulator design. When applying a certain waveform. Also, the level of the magnetic field of the modulator must be within a certain range, otherwise the magnetic fields of permanent magnets will burst into the modulator coil and the overunity effect will be reduced.
To be continued
Best regards,
Boris
-
OUT OF SUBJECT BUT WHO CARES.
-
Hello !
I added a picture showing the placement of magnetic fields in the air.
This clearly shows why the MAG device looks like this . https://overunity.com/18563/magnetic-air-coil-generator-mag/msg548448/#msg548448
There is a small gap in the middle of the magnetic fields where there is no magnetic field. By acting on it, there is a possibility of obtaining free energy.
I have an idea to place a Bifilar flat air coil in it.
Regards
-
this is along the lines of kunel and Silverhealtheu
https://overunity.com/18272/kunel-device/
it seems fast rise impulses are key here