Free Energy | searching for free energy and discussing free energy

2020 builders survivor board => Floors MMM-2 builders board => Topic started by: Floor on May 25, 2020, 09:34:23 PM

Title: The magnet fantasic
Post by: Floor on May 25, 2020, 09:34:23 PM
This is a new topic in which to post and share / discuss  one's own, as well as internet discovered
PERMANENT magnet interactions.

the Halbach array

V gate designs / principles

the Magnetic Tractor   like  @ https://www.youtube.com/watch?v=0RqXjIGyk50

magnetic ramp accelerators  like @
https://www.youtube.com/watch?v=n-fnlmzjsYQ&list=PL18F92E8FE71E9FBA&index=7

magnetic shielding (diamagnetic, mu metal, Floor's, others

magnetic levitation

the Edward Leedskalnin  perpetual motion holder

magnetic force beams
                                                    others

      cheers
           Floor
Title: Re: The magnet fantasic
Post by: Floor on July 15, 2020, 04:17:58 AM
 Re: Floor's Magnets explained
« Reply #61 on: June 28, 2020, 03:04:33 AM »

   

https://www.youtube.com/watch?v=lT4kgO41K3o


At 1:30 in this video, we see a motor of reciprocating shear pistons. This design would pump the overhead spring with connected pistons:

Interesting build
            floor

Title: Re: The magnet fantasic
Post by: Floor on July 15, 2020, 04:36:23 AM
interesting designs

https://www.kundelmagnetics.com/


Title: Re: The magnet fantasic
Post by: lota on July 15, 2020, 07:31:22 AM

Hello
I have tried this. It seems to be fungizing. But the set-up is not finished. I want to print it in 3D. You need an exact curve for the construction. Calculated for the magnetic length. There is a simulation program for this. I'm going to pick it out.
Greeting
Lo


https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/ (https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/)


The Software for Simulation.
https://www.artas.nl/de/downloads
Title: Re: The magnet fantasic
Post by: Floor on July 15, 2020, 08:42:18 PM
Hello
I have tried this. It seems to be fungizing. But the set-up is not finished. I want to print it in 3D. You need an exact curve for the construction. Calculated for the magnetic length. There is a simulation program for this. I'm going to pick it out.
Greeting
Lo


https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/ (https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/)


The Software for Simulation.
https://www.artas.nl/de/downloads

I don't know how to open this attachment 

https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/ (https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/)

   best wishes
      floor
Title: Re: The magnet fantasic
Post by: gyulasun on July 16, 2020, 12:24:19 PM
I don't know how to open this attachment 

https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/ (https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/)

   best wishes
      floor
   

Hi Floor, 

The attachment member Iota refers to in his link is the same you attached to your Reply #2 above i.e. kedron_eden_project.pdf (https://overunity.com/18501/the-magnet-fantasic/dlattach/attach/176690/)   

There seems to be conflict between recent upgrades in Firefox browser and this forum software and the attached files lose their name and extension when they are downloaded by Firefox.  The byte size of the downloaded files does not change and by renaming them to the original name and file extension will solve the problem.  I already wrote about this to Stefan Hartmann and he indicated a forum software uprgrade. 

If you use other browser than Firefox, the attached files can be downloaded without problems. 

Gyula
Title: Re: The magnet fantasic
Post by: Floor on July 16, 2020, 02:52:48 PM
Thanks Gyula
 
@ Lota

Lota quote

Hello
I have tried this. It seems to be fungizing. But the set-up is not finished. I want to print it in 3D. You need an exact curve for the construction. Calculated for the magnetic length. There is a simulation program for this. I'm going to pick it out."

End of Lota quote

There was recently, a member (here at the O.U. forum) working
on replication of the Kedron Eden claims.  That person
did not complete those tests, I think.

I prefer not to take it for granted that those kinds of claims
are true.  I want to see for my self.

I will start a topic here for the purpose of
presenting some sets of measurements of...

the work done to shear magnets apart
           as compared
to the work done to pull them directly from one another

That topic will be titled

"Magnet shear to direct pull work ratio"



        greetings
      floor
Title: Re: The magnet fantasic
Post by: Floor on November 22, 2020, 10:34:20 PM
I have moved this post by Lunkster from
the "Magnet shear to direct pull work ratio" topic

QUOTE FROM Lunkster
Floor,

The results of your testing will be very useful for me.

I do want to ask if it would be possible to have a set of data
where there is one magnet stationary at the bottom and
the one magnet raised above it enough so that
it could rotate 360 degrees.

I see a lot of designs that are not parallel to each other and
this would help me to better understand those designs.

Lunkster
END QUOTE FROM Lunkster

     I maybe understand your question, maybe not.

     Give a drawing and explination of the magnet interaction you are
    wanting to know about, and I probably can give an answer.
 
Please respond in this topic.
thanks
   floor
Title: Re: The magnet fantasic
Post by: Lunkster on November 23, 2020, 07:24:26 PM
Floor,

The drawing is what I would like an answer to.
So I was not sure of how to ask how to break this
configuration up for useful test sub parts that
we could all benefit from the data.

Do you if this is something that can be broken up an analysed?

Lunkster
 
Title: Re: The magnet fantasic
Post by: Floor on November 24, 2020, 03:19:51 AM
@Lunkster

Thanks for the post.
Interesting design / question.

I'm doing another test currently.

I do not make a promise to measure your ideas at this time, but
I will contemplate them, and maybe measure for you in the future.

   thanks
   again
   floor