Author Topic: Alternative Partnered Output Coils and Free Energy (Read 24518 times)

Raycathode · « **on:** April 03, 2020, 06:14:05 PM »

If any one is interested in posting related on the subject Partnered Output Coils - Free Energy iplease feel free here!
many thanks Raymondo.

Raycathode · « **Reply #1 on:** April 03, 2020, 06:43:43 PM »

Here is an interesting posting from

Offline WhatIsIt

Full Member
***
Posts: 244
At The End It Will Matter!

Re: Partnered Output Coils - Free Energy
« Reply #8638 on: March 23, 2020, 12:28:59 PM »
https://youtu.be/nIOQWV-hrcY
similare to Nelsons work.

nelsonrochaa · « **Reply #2 on:** April 04, 2020, 02:37:22 PM »

Quote from: Raycathode on April 03, 2020, 06:43:43 PM

Here is an interesting posting from

Offline WhatIsIt

Full Member
***
Posts: 244
At The End It Will Matter!

Re: Partnered Output Coils - Free Energy
« Reply #8638 on: March 23, 2020, 12:28:59 PM »
https://youtu.be/nIOQWV-hrcY
similare to Nelsons work.

Hi Raycathode,
Hope you goes well .
could you clarify the point on the video you think is important ? What The similarity you find in this video , that you relate with my work ?
Are you referring, the difference of input vs output in the bulbs? is that ? or the use of square wave indeed the sinusoidal signal to excite the coils ?

Best rewards

Nelson Rocha

WhatIsIt · « **Reply #3 on:** April 04, 2020, 02:55:51 PM »

Lately I been experimenting with bucking fields,
and have unusual effects.
I wont call it bucking coils anymore, but rather bucking fields.

There are differences in a matter how coils are wounded,
Some coils share electric field, some magnetic field, other share both,
creating different outcomes.
They all have one thing in common.
Bucking fields.

I am still in phase to determine differences, and for now had some progress in that direction.
Until then, there is not much to say.

At the end it really wont matter who was first, last or not involved at all.
We.are all making progress on our own way.

lancaIV · « **Reply #4 on:** April 04, 2020, 03:15:52 PM »

What is a capacitor,physically ?

With how many coils minimum you can construct a capacitor ?
Not " partnered coils" : a capacitor classical ? Up to "Litz" ? Or now " partnered foils" !

"Capacitor" meaning and production history !

What would be a physical anti-capacitor ?
Electret/Magnetret comparison !

You know that a dc motor can also easily be used as dc generator !
And it is easy to let it rotate ccw or cw by coils positive and negative pole change !

What is it about ac motors ?
How someone can use an ac motor as ac generator ?

motor nominal rpm ! Fixed : grid-normativ 50Hz/3000 rpm 60Hz/3600 rpm
or variable

a-or synchron (ccw or cw) is for ac ever conceptual unidirectional

With/- out capacitor !

So now : pulsed dc
Which dis-/ad vantages from dc machines and dis-/ad- vantages from ac machines ?

Off-topic ? On demand this poste will become deleted !

Raycathode · « **Reply #5 on:** April 04, 2020, 04:06:24 PM »

First I want to make it clear I clam no originality here and each published contributor
Reserves there own originality and copy right if any claimed respectively.
Hello Nelson, great to see you here, and yes some time ago your self Nelson published three videos on one of the threads on OU
which got me interested after watching Mr Preva videos it appeared to use a vertical ferrite re wound reactive (bucking coil) idea
Similar to Akula porch light circuit but simplified.

I tried replicating or more like finding out how it worked my biggest mistake was using square waves it didn't work.

It's all been a huge learning curve for me and I don’t know every thing by any means in fact I now relatively nothing
by your standards its all about experimentation but knowing some threshold limits and tried and tested circuits
can help, as Mr Watson has shown here.

Other published reference to same type circuit idea were published by Dr Stiffer some years a go using a bifilar wound
mains filter circuit coil. Unfortunately he gave no component values or how the circuit actually worked. Or where the energy came from.

Main points to start experimenting with.

Keep winding impedance to a minimum
Found coil ratio 3 to 1 works best
Works well using a sine wave input
Works best with small incandescing filament bulbs rather than LEDs.
Note finding the common resonant freq can be end up being quite high

Raymondo

Raycathode · « **Reply #6 on:** April 04, 2020, 04:12:20 PM »

Quote from: lancaIV on April 04, 2020, 03:15:52 PM

What is a capacitor,physically ?

Off-topic ? On demand this poste will become deleted !

Hi there, unfortunatly I won't cover any of this what you ask as it's electro mechanical and those interested might find it difficult
to find your contrebution here.

Raymondo

nelsonrochaa · « **Reply #7 on:** April 04, 2020, 04:58:53 PM »

Quote from: WhatIsIt on April 04, 2020, 02:55:51 PM

Lately I been experimenting with bucking fields,
and have unusual effects.
I wont call it bucking coils anymore, but rather bucking fields.

There are differences in a matter how coils are wounded,
Some coils share electric field, some magnetic field, other share both,
creating different outcomes.
They all have one thing in common.
Bucking fields.

I am still in phase to determine differences, and for now had some progress in that direction.
Until then, there is not much to say.

At the end it really wont matter who was first, last or not involved at all.
We.are all making progress on our own way.

Hi WhatIsIt,

I will tend to agree with you about how the coils are wounded , and maybe is problem that most experimenters find when make this type of experiments.
Depending how the coil are wounded , we could obtain different results .
People interested is such theme, maybe could put there eyes in some of this documents I share . https://drive.google.com/open?id=0ByZY5hj0h0hXSlJFVkZMVGFXLUE
I have sure that will help improve the understand about the subject of “partnered coils” and help forward on how should be wound the coils to able control the inductance of other coil , acting like a current valve .

But to me the most important point is how to “blind” the input ; this means ; make use of the output without increase the main input current, if that is not achieved, well ..
Tesla talk about this aspect in some of their literature, about blind one side of coil or in other words , cancel mutual inductance between coils .

And Yes coils sometimes share electric field, magnetic field, and not forget last one, the dielectric field

Best rewards

Nelson Rocha

nelsonrochaa · « **Reply #8 on:** April 04, 2020, 05:09:07 PM »

Quote from: Raycathode on April 04, 2020, 04:12:20 PM

Hi there, unfortunatly I won't cover any of this what you ask as it's electro mechanical and those interested might find it difficult
to find your contrebution here.

Raymondo

Hi Ray, are you talking about exactly circuit ? Could you point me please to the link of topic ? Thanks

Best Rewards

Nelson Rocha

lancaIV · « **Reply #9 on:** April 04, 2020, 05:47:08 PM »

Quote from: Raycathode on April 04, 2020, 04:12:20 PM

Hi there, unfortunatly I won't cover any of this what you ask as it's electro mechanical and those interested might find it difficult
to find your contrebution here.

Raymondo

In rotational devices you see and feel kinetic forces,where are these kinetic forces in static devices ?
Or instead where " how converted ?"! HEAT ? Over ambiental temperature process ?

1 stator/rotor coils couple to multiple stator/rotor couple
analog to 1 primary/secondary couple or multiple secondaries/primaries couple !

From a german EE-advicer his " Electropedia": 1 motor + 1 generator ~ 1 Capacitor

Primary ccw or cw winding ,secondary ccw or cw winding,.......

Is an ac output static inverter not also replaceable by ac- generator and ac-motor or dc motor couple :
Transverter Rotoverter

When rotoverter ~ Capacitor ?
analog :

When transverter ~ Capacitor ?

Be variable in thinking and physical experimental trials ( when you neutralize and when you accumulate EMF ?For what cores when air-coils possible ? )

Maths laws ! : Physics laws ?
++ =
+- =
-+ =
- - =
When you are designing an electro- magnetic circuit scheme/schemata,are the positive and negative streams flows only the theoretical "educated orientations(without classical correction from wrong definition) and appears 1:1 = 1 perfectly in your physical experiment model ?

Raycathode · « **Reply #10 on:** April 04, 2020, 05:49:34 PM »

Quote from: nelsonrochaa on April 04, 2020, 05:09:07 PM

Hi Ray, are you talking about exactly circuit ? Could you point me please to the link of topic ? Thanks

Best Rewards

Nelson Rocha

Hello Nelson I’m getting a bit confused here sorry, which link are you referring too A. your circuit to T1000 in the Dally thread back in last May?
or B. Mr video of the bucking circuit / field ?

If your talking about your circuit I have just found it but after all the time laps I think I might have made a mistake as your layout
Looks rather like the circuit you published using series parallel inductances, however you appear to have miniaturised the circuit and
Produced the same effect using off the shelf inductors if I’m not mistaken.

I don’t suppose you could comment on the subject

Sorry about that but I’m still learning slowly.

Regards Raymondo

PS if you want me to deleate any of this let me know !

nelsonrochaa · « **Reply #11 on:** April 04, 2020, 06:15:31 PM »

Quote from: Raycathode on April 04, 2020, 05:49:34 PM

Hello Nelson I’m getting a bit confused here sorry, which link are you referring too A. your circuit to T1000 in the Dally thread back in last May?
or B. Mr video of the bucking circuit / field ?

If your talking about your circuit I have just found it but after all the time laps I think I might have made a mistake as your layout
Looks rather like the circuit you published using series parallel inductances, however you appear to have miniaturised the circuit and
Produced the same effect using off the shelf inductors if I’m not mistaken.

I don’t suppose you could comment on the subject

Sorry about that but I’m still learning slowly.

Regards Raymondo

PS if you want me to delete any of this let me know !

Hi Raymondo ,
I really don't remember post that circuit in OU ! .
I think i only share a video about that with AlienGrey but never share any diagram to duplicate them.
But I am not shocked

that my things have been appearing around since they pirated my personal data in my pc; the deleted almost my accounts, and stolen private information ... is really sad but is the reality .
Yes that circuit is a small simplified model to study some aspects similar with the related theme of partnered coils , but i never finished that circuit ,but i have that circuit

maybe i could remove the dust and try put it work again

. If i remember , that circuit run in auto-resonance without use any external signal .
What is your doubts about that circuit ?

Best rewards

Nelson Rocha

Raycathode · « **Reply #12 on:** April 04, 2020, 07:45:04 PM »

Quote from: nelsonrochaa on April 04, 2020, 06:15:31 PM

Hi Raymondo ,
I really don't remember post that circuit in OU ! .
I think i only share a video about that with AlienGrey but never share any diagram to duplicate them.
But I am not shocked that my things have been appearing around since they pirated my personal data in my pc; the deleted almost my accounts, and stolen private information ... is really sad but is the reality .
Yes that circuit is a small simplified model to study some aspects similar with the related theme of partnered coils , but i never finished that circuit ,but i have that circuit maybe i could remove the dust and try put it work again . If i remember , that circuit run in auto-resonance without use any external signal .
What is your doubts about that circuit ?

Best rewards

Nelson Rocha

Hi Nelson you can find the posting here on this page https://overunity.com/12736/kapanadze-cousin-dally-free-energy/21240/

So is the circuit self oscillating only 2 or 3 wires toddle off unseen some where, you must perhaps use some sort of vfo with feed back locking
I would have thought and the other problem is the output isolation use of the mains filter and choke. Which is a little mind boggling
with out seeing how your advanced mind knowledge has sorted that one out

as i said I’m unprofessional but like experimenting on a
Educational level.

Regards Raymondo

WhatIsIt · « **Reply #13 on:** April 05, 2020, 04:29:25 PM »

Quote from: nelsonrochaa on April 04, 2020, 04:58:53 PM

But to me the most important point is how to “blind” the input ; this means ; make use of the output without increase the main input current, if that is not achieved, well ..

How did you blind input?

How much AC source spend if it has only one capacitor in circuit? (or one inductor?)
Basic knowledge.
Source does not see capacitor, zero consumption.

Let's say that bucking field coil has only 0,1 ohm resistance, zero inductance, high gauge copper.
If we connect serial with that capacitor zero inductance bucking field coil of 0,1 ohm,
will the consumption of source change a lot or near nothing?

Can you extract energy from bucking fields while source consumes nothing?
Source is blind in that case.

Now, we are coming to essence of my current research.
How different arrangement of bucking electrical field only,
bucking magnetic field and both bucking fields together combined gives different solutions to that situation.

For example, bifilar bucking field coil has strong electrical field because the way it is wound.
(Floyd Sweet, kill magnetic field, double electrical field).
What will happen?
Just one example.

lancaIV · « **Reply #14 on:** April 05, 2020, 05:08:17 PM »

Quote from: WhatIsIt on April 05, 2020, 04:29:25 PM

How did you blind input?

How much AC source spend if it has only one capacitor in circuit? (or one inductor?)
Basic knowledge.
Source does not see capacitor, zero consumption.

Let's say that bucking field coil has only 0,1 ohm resistance, zero inductance, high gauge copper.
If we connect serial with that capacitor zero inductance bucking field coil of 0,1 ohm,
will the consumption of source change a lot or near nothing?

Can you extract energy from bucking fields while source consumes nothing?
Source is blind in that case.

Now, we are coming to essence of my current research.
How different arrangement of bucking electrical field only,
bucking magnetic field and both bucking fields together combined gives different solutions to that situation.

For example, bifilar bucking field coil has strong electrical field because the way it is wound.
(Floyd Sweet, kill magnetic field, double electrical field).
What will happen?
Just one example.

"Source is blind in that case " in german for "reactive current" in use "Blindstrom"

https://www.youtube.com/watch?v=ekeptjvd1zE

hot,hotter or near,nearer + nelsonrocha ; dielectric

reactive current to active current conversion

net-grid negative power to positive power without extra-costs "Blindstrom-Kompensation"

Maxwell "displacement current"

News:

User Menu

Author Topic: Alternative Partnered Output Coils and Free Energy (Read 24518 times)

Raycathode

Alternative Partnered Output Coils and Free Energy

Raycathode

Re: Alternative Partnered Output Coils and Free Energy

nelsonrochaa

Re: Alternative Partnered Output Coils and Free Energy

WhatIsIt

Re: Alternative Partnered Output Coils and Free Energy

lancaIV

Re: Alternative Partnered Output Coils and Free Energy

Raycathode

Re: Alternative Partnered Output Coils and Free Energy

Raycathode

Re: Alternative Partnered Output Coils and Free Energy

nelsonrochaa

Re: Alternative Partnered Output Coils and Free Energy

nelsonrochaa

Re: Alternative Partnered Output Coils and Free Energy

lancaIV

Re: Alternative Partnered Output Coils and Free Energy

Raycathode

Re: Alternative Partnered Output Coils and Free Energy

nelsonrochaa

Re: Alternative Partnered Output Coils and Free Energy

Raycathode

Re: Alternative Partnered Output Coils and Free Energy

WhatIsIt

Re: Alternative Partnered Output Coils and Free Energy

lancaIV

Re: Alternative Partnered Output Coils and Free Energy