Free Energy | searching for free energy and discussing free energy

Solid States Devices => Wireless Energy Transfer => Topic started by: synchro1 on December 06, 2019, 12:08:06 PM

Title: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 12:08:06 PM
I should start a new "Quantum Receiver" thread at this point.

I need to fully credit Dr. Stiffler as the Marconi of Quantum radio. The permanent Neo magnet is a miniature Earth with two planes of Energy that share a boundary layer. These boundary layers both have frequencies; Earth's 7.8 Hz and Neo's 13.56 Mhz. The Neo magnet is a saturated capacitor with a voltage of C squared. The dielectric value of the magnetic field line is the Lorentz force of 90 degrees. This raises the capacitance voltage of the magnet core's static field to near infinity. The right hand rule causes the force fields to spiral. This force makes the World turn. Tesla's Wardenclyff used the Earth and Stiffler's "Quantum Receiver" the Neo magnet.

SFM or "Static field modulation" of the magnet core dielectric field is the equivalent of Tesla's excitation of the dielectric field of the Earth, which has the same value of capacitance, but at a different boundary frequency. These static fields are identical and totally coherent as the same thing; The Plenum!

The stronger the magnetic force, the higher the dielectric value of the field lines and the greater the potential of the static field.

The heaviest element, Moscovium 115, would result in the most powerful magnet material. The frequency in the boundary layer of this UFO propellent would be in the Plank constant range. This would act as a 'Gravity Venturi".

Shock polarizing the 115 electrons would raise the dielectric value of the field lines to the highest possible limit in the physical universe. The frequency in the boundary layer with the "Zero "charged" static field would press the envelope toward the Plank constant, and repel or attract gravity. This 115 magnet wafer may be compared to a "Gravity Crystal", that can lens the force. This would be a macro application of SFM, and in this case, static field modulation would supply guidance control to the craft.

Dr. Greer would say this craft was 3d printed in a different dimension and phased into our world.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 02:11:25 PM
That's the most interesting new thread here since many months. Thank you for opening it.   :)

Where does the frequency 13.56 MHz come from ?  Is it the NMR frequency of neodymium ? 

But the NMR frequency would not be fixed, it depends on the strength of the magnetic field.

About one year ago i also stumbled upon Dr. Stiffler's 'quantum energy receiver' and i tried to replicate it.
I also got some voltage and was impressed... but only until i removed the magnets, and the voltage was still there.
Finally i discovered that it was only EM radiation i was picking up.


Edit:
According to http://triton.iqfr.csic.es/guide/eNMR/chem/Nd.html the NMR frequency of 143Nd is 27.188 @ 11.744T.
So the 13.56 MHz would be at roughly 5.8 T but i doubt that any Nd magnet has such a high field density, not even inside.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 02:46:09 PM
That's the most interesting new thread here since many months. Thank you for opening it.   :)

Where does the frequency 13.56 MHz come from ?  Is it the NMR frequency of neodymium ? 

But the NMR frequency would not be fixed, it depends on the strength of the magnetic field.

About one year ago i also stumbled upon Dr. Stiffler's 'quantum energy receiver' and i tried to replicate it.
I also got some voltage and was impressed... but only until i removed the magnets, and the voltage was still there.
Finally i discovered that it was only EM radiation i was picking up.


Edit:
According to http://triton.iqfr.csic.es/guide/eNMR/chem/Nd.html (http://triton.iqfr.csic.es/guide/eNMR/chem/Nd.html) the NMR frequency of 143Nd is 27.188 @ 11.744T.
So the 13.56 MHz would be at roughly 5.8 T but i doubt that any Nd magnet has such a high field density, not even inside.


@skywatcher,


Good to hear from you. The resonant frequency at the boundary layer is an exchange of energy in transition between the two planes of energy like an LC tank.

The specifications for the resonant frequency of the neodymium material that you referenced to is a different measure. The grade of the magnet material has a closer ratio to Tesla strength then the frequency of the boundary layer. frequency of the Bloch wall. 2 chral spirals converging in a knot, not a 2d line.


EM can cause a huge problem, that's why Stiffler used his microwave as a Faraday cage to isolate it.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 03:37:48 PM
I reported that hyper dimensional aliens phased Outer World technology into my attic, but the F.B.I. continues to ignore me; Plus that line extension is always busy, hinting that it's possible they're targeting multiple victems.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 04:51:31 PM
The polarized Umpentium dielectric field propels the UFO craft with a superluminal doughnut turbine jet ski effect in a Sea of Gravity like the actual one does in the Ocean. Cavity and gravity implosion.

Lazar showed the 115 wedge cupped between the electrodes of a spark gap in the cockpit. The material needs regular polarizing shocks to remain stable and fully magnetized. Allowed to demagnetize this material will begin to decay. This element can only exist as a magnet.
Title: Re: "Quantum Receiver".
Post by: Raycathode on December 06, 2019, 05:16:43 PM
The polarized Umpentium dielectric field propels the UFO craft with a superluminal doughnut turbine jet ski effect in a Sea of Gravity like the actual one does in the Ocean.
Ah yes that reminds me Richard Nixons replacing expensive sugar with the glycol plant fructose-rich corn oil that has smaller particles that can saturate ones arteries with calcium blocking sludge that both fat and fructose witch is toxic and ends in either a stroke or heart attack or aneurysm I suppose the glycol would make folk happy, so the point do you think Aliens could improve on that as more or less ? as they must already be far more organized than flies running the show at the moment and aint sweeteners in everything ? ;D ;D

Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 05:17:49 PM
BTW 13.56 MHz is a ISM frequency and is used for RFID applications.
Title: Re: "Quantum Receiver".
Post by: Raycathode on December 06, 2019, 05:27:15 PM
BTW 13.56 MHz is a ISM frequency and is used for RFID applications.
Realy ? https://en.wikipedia.org/wiki/Talk:ISM_band


https://www.rfidinc.com/frequency/13-56-mhz/
 Nothing an IMP couldn't fix  ;D

https://www.youtube.com/watch?v=K6iF5sINVns
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 05:31:21 PM
That's the magnetic lock frequency on the garage door opener.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 06, 2019, 06:55:51 PM
Synchro seems to know his theory, why dont you people listen to the man and build?

I dont wanna interject here at all.

Buy I saw the ufo alloy and it was like a succession of 4micron layers of bismuth and such, whats your response to this?

Synchro1, make a circuit for these men. At least a workflow. It seems that the tuning is extremely difficult.

Kolbacit?

I have already suggested proposals, why dont nobody check out all this stuff synchro is bringing forward.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 07:03:13 PM
Synchro seems to know his theory, why dont you people listen to the man and build?

To be honest, i don't understand his theory well enough to be able to build anything.   :-\

Some more info about this 13.56 MHz frequency would be helpful... maybe some concrete experiment which shows some effects and can be replicated.


Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 09:23:16 PM
Two Neo magnet tubes with their static fields in resonance at 13.56 Mhz, would Quantuum couple and open a pathway for the transmission of power and signal data through counter space. Two crystal oscillators and two tube magnets would be able to transfer power and data instantly from Earth to Mars if they did it across a test bench.

Dr. Stiffler privately disclosed to me and a few others that he had indeed confirmed this "Quantum Link", but chose to keep it guarded from the public to avoid stress.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 09:31:29 PM
Two Neo magnet tubes with their static fields in resonance at 13.56 Mhz, would Quantuum couple and open a pathway for the transmission of power and signal data. Two crystal oscillators and two tube magnets would be able to transfer power and data instantly from Earth to Mars if they did it across a test bench.

Dr. Stiffler privately disclosed to me and a few others that he had indeed confirmed this "Quantum Link", but chose to keep it guarded from the public to avoid stress.

Did you confirm this by own experiments (not to Mars, across the bench would be enough for the moment  ;) ) ?

What do you mean by 'neo magnet tube' ?  A tube-shaped neo magnet with one pole inside and the other pole on the outside ?
How are the crystal oscillators connected to the magnets ? 
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 09:33:21 PM
Did you confirm this by own experiments (not to Mars, across the bench would be enough for the moment  ;) ) ?

What do you mean by 'neo magnet tube' ?  A tube-shaped neo magnet with one pole inside and the other pole on the outside ?
How are the crystal oscillators connected to the magnets ?


There is no electrical connection between the oscillator and the magnet, only capacitive. Tubes are longer ring magnets. Any Neo magnet will work. Lidmotor has a few good videos.

I never tested it. I'm setting up to run my first video.

Stiffer never discribed his set up, but modulating the resonant wave would carry the signal .
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 09:40:14 PM
You mean this sort of ring magnet ?
https://media2.supermagnete.de/themes/pdesign/pics/icons/rings_outline.png
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 09:51:33 PM
You mean this sort of ring magnet ?
https://media2.supermagnete.de/themes/pdesign/pics/icons/rings_outline.png (https://media2.supermagnete.de/themes/pdesign/pics/icons/rings_outline.png)


That's an axial polarized ring magnet. A tube would be longer. The static field appears in the hollow core, but it's irrelevant. Dr. Stiffler sandwiches first a high perm bifilar toroid coil then a HV capacitor between a stack of Neo discs to modulate the static field. I use a 1" diametricly polarized tube magnet in my synchro coil and wrap it with copper windings. The capacitors on the two receiver LC tanks would need pico farad tuners to get the twin resonant "Q". Crystal oscillators are trouble free.

Two quantuum coupled "Synchro Coils" in static field resonance should share the same rise in voltage potential transmitted through the capacitors from one to the other. A second receiver would rise in voltage from the scaler value along with the first receiver and the transmitter.

I'm talking about touching a 9 volt battery, to the transmitter capacitor electrodes, which could be any one of the three receivers. We charge one, and the other two or multiple numbers would rise to the same voltage instantly tuned to the same static field resonant frequency.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 06, 2019, 10:36:36 PM
Well I guess Synchro1 that you do a crappy job @ explaining then.

Your audience is not getting you.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 11:09:54 PM
Well I guess Synchro1 that you do a crappy job @ explaining then.

Your audience is not getting you.


Position two Neo tube magnets next to crystal oscillators with tin foil attached and batteries connected, so both magnet core static fields resonate at 13.56 Mhz. These magnets are now coupled in the quanta and a superluminal pathway opens between them.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 06, 2019, 11:19:29 PM
So let's say i have a cylindrical neo magnet (you said the hole in the center is not important) for example i have some N42 neos with 10 mm diameter and 60 mm long.


Then i need a crystal oscillator tuned to 13.56 MHz. Is any other (tunable, but stable) oscillator also possible ?

What i don't get: How is the oscillator coupled to the magnet ?  Is there a coil ?  A picture would be helpful. 
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 06, 2019, 11:40:05 PM
You will get it eventually. Stienmetz: There are two equal energies in the Universe: One static (Energy) the other magnetic (Matter). E=MC2. This is the Lorentz force field dielectric ratio of magnetism and voltage.
The infinite voltage inside the static magnet core field is equal in potential to the static field in the vacuum of space that surrounds it. This constitutes a fifth dimension, continuum or Quanta (Whole). This field is not in space and time. Modulation of this field is in counterspace.

Voltage has no magnetic value. Electricity does. This static field oscillates from static (electricity) not an electrical connection. The static Plenum of zero point (Infinite Voltage) is outside the material and physical World.

Everything else is insulator dielectric, blocking this power around itself with magnetic field lines. This field shows up inside the Neodymium magnet core dielectric as C2 (Light Squared) power field potential. That is equal to everything around it with nothing in the way. So a signal through this (Hyper-Dimensional rabbit hole) goes everywhere with no resistance or impedance. Nothing to slow it down. Instantaneous and superluminal.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 12:35:44 AM
The static field potential in a Neo magnet core is in equilibrium with the the surrounding Plenum potential that is infinite and timeless. The magnetic field connects to a larger field outside itself as well, but it's on the physical plane in the 4th dimension..
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 01:49:33 AM
Wrapping the two tube magnets with bifilar coils would allow us to increase the magnetism in one. hence raising The capacitive charge level of the static field, and measuring the rise in potential in the receiver coil through the other bifilar wrap. The resonant frequency of the bifilars should match the 13.56 Mhz of the static field oscillating crystals.

We could Skype between Earth and Mars in real time from laptops connected to the quantum through Neo magnet cores just like this "Dollar Store" table version.

Lidmotor should step to the plate at this time to score his rightful place as our "Quantum Marconi". I'm Lobbing this one to Randy, Dr. Stiffler's best pupil.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 01:59:52 PM
The first public demonstration should be a convention event coupled with the formation of a new company:

                                                          Quantacom

This event would be as important as Marconi's first Transatlantic broadcast.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 07, 2019, 02:35:03 PM
If you cant desig a complete circuit from A to Z and express yourself with a complete drawing.

You cant be a position to know how FE energy works. Dont expect others to design your theory for you. For that, you would need to come up with excellent box diagram communication methods that better describe your circuit.

Of how you THINK its going to work. Right now, its all LAZY talk.

Simple as that. This is basic engineering.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 02:44:14 PM
If you cant desig a complete circuit from A to Z and express yourself with a complete drawing.

You cant be a position to know how FE energy works. Dont expect others to design your theory for you.

Simple as that. This is basic engineering.



You're right about that; However, examining the consequences of a success is not completely invaluable. A new Zenith would be achieved that would completely revolutionize our current technology.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 07, 2019, 02:45:19 PM



Your right about that; However, examining the consequences of a success is not completely invaluable. A new Zenith would be achieved that would completely revolutionize our current technology.

No, I want none of that smooth talk.

Zip it. I dont want excuses.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 02:47:46 PM
No, I want none of that smooth talk.

Zip it. I dont want excuses.


I am not your sneaker.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 07, 2019, 02:48:58 PM
Well if you dont know how to express yourself, go and learn how to do it, then come back.

This has to come form you.

Otherwise, keep being that talking clown.

I'm done here.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 04:06:14 PM
Well if you dont know how to express yourself, go and learn how to do it, then come back.

This has to come form you.

Otherwise, keep being that talking clown.

I'm done here.


My test failed.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 07, 2019, 09:13:14 PM
The basic question (which has not yet been answered) still is: what about the 13.56 MHz ?

Is this frequency based on some 'theory' (if yes, i would like to hear more about it), or has it been discovered by experiments ?
Have any experiments been done at all ?  Or is it only some idea 'out of the blue' ?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 07, 2019, 10:42:14 PM

@skywatcher,


Start here:

https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s (https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s)
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 07, 2019, 11:23:03 PM
@skywatcher,


Start here:

https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s (https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s)
There is not even a magnet involved...  and i'm sure it would also work with any other frequency when you tune it to resonance.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 01:09:33 AM
There is not even a magnet involved...  and i'm sure it would also work with any other frequency when you tune it to resonance.


@skywatcher,


The magnet is the "Earth Field" in this video.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 08, 2019, 10:34:47 AM
The magnet is the "Earth Field" in this video.

But didn't you say for using the earth field the Schumann frequency of 7.8 Hz has to be used and 13.56 MHz is only for Nd magnets ?

I want to see unusual effects with Nd magnets which occur at 13.56 MHz (and ONLY at 13.56 MHz). 

That's how i understood your first post in this thread.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 12:21:54 PM
But didn't you say for using the earth field the Schumann frequency of 7.8 Hz has to be used and 13.56 MHz is only for Nd magnets ?

I want to see unusual effects with Nd magnets which occur at 13.56 MHz (and ONLY at 13.56 MHz). 

That's how i understood your first post in this thread.

I'm sorry for too hasty an answer. it's not the Earth field:

Earth field and magnet field both have two planes of energy, equal in strength, the "Static Dielectric" and the "Magnetic". Lidmotor is modulating the dielectric plane of his Stiffler L3 Inductor coil.

Lidmotor's L3 coil has both a dielectric and a magnetic plane, just like the Neo magnet. He is modulating the dielectric field of the charged L3 coil at 13.56 Mhz like Stiffler does the static field of his stack of Neo magnets..

Tesla used the static Earth field with his Wardencliff transmitter. His frequency was determined by the Earth field boundary layer, not magnetic dielectric field resonant frequency.

What we see going on here is transmission through the "Quanta" not the Earth field dielectric. That's the bifilar spiral wireless broadcasting frequency of 7.8. The Tesla spiral coils transmit and receive power through the "Earth Boundary Shell", the Stiffler patth uses the dielectric plane of the magnet or magnet coil, both with identical boundary layer frequencies of 13.56.

This energized coil would work the same way in outer space as the Neo magnet. The frequency of the dielectric plane in Outer Space is 13.56. "The Cosmic Resonance" with a dark matter Inductor absorbing energy.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 01:29:25 PM

                                                         Unified field theory of Stienmetz:

The "Galaxy Field" has an LC resonance where the Neutron Star at the center acts as an Inductor absorbing energy. Cosmic radiation is the Energy from the transmutation at the dark matter boundary layer, this frequency is 13.56 Mhz.

Matter and Energy can neither be created nor destroyed. They exist as equal. They transition at the rate of E=MC2. This transition takes place both between the boundary layer of the Neo magnet and the perimeter of infinite Energy and Infinite Mass at the same frequency of 13.56. The Plenum!

Stienmetz fed Einstein that equation based based his LC theory and the "Planck Constant". Dr. Stiffer discovered this frequency!

Tincan'sful of Coladas said piezo not pedo.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 02:32:33 PM
13.56 divided by 52 equals .260. The days in the sacred Mayen Year. "The Maya sacred calendar is called Tzolk'in in Yucatec Mayan and Chol Q'ij in ... in combination with the numbers 1 to 13, and produces 260 unique days". The Mayen Calendar is calibrated in units that are a pulse beat of the Galaxy.

 "Venus can be seen from Earth (https://en.wikipedia.org/wiki/Earth) as a small black dot moving across the face of the Sun. The duration of such transits is usually several hours (the transit of 2012 lasted 6 hours and 40 minutes). A transit is similar to (https://en.wikipedia.org/wiki/Occultation#Occultations,_transits_and_eclipses) a solar eclipse (https://en.wikipedia.org/wiki/Solar_eclipse) by the Moon (https://en.wikipedia.org/wiki/Moon)". One fourth an Earth revolution.

 The Lunar cycle is 13 months of 364 days: 4 thirteens are 52: 20 thirteens are 260.

The Planetary orbit cycles are a harmonic of the Galatic LC frequency. This is "Mayan Cosmology". Poker deck.

These Cosmic harmonic conjunctions are not a coincidence. The Harmonic conjunction of of the solar transit of Venus with, Earth's rotation rate, Luner revoloutions and Eclipse frequencies. These carefully recorded observations helped the Mayans redact this "52 Loom factor" as a Roundoff.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 02:46:09 PM
The Quantum grid is the Loom of Maya.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 03:02:45 PM
The Earth has a black hole in the center. This "Black Hole" is connected to the "Black Hole" in the center of the Galaxy and the Sun by a Hperdimensional force. This "Earth Core Black Hole" generates a closeted base frequency from the boundary layer between dark matter inside the Earth's core like our Heavenly Father Hu'Nobku. The "Atun of the Maya". (Regaring the subject with reverence)

13.56 Mhz is a "Quantum Constatnt", not just one frequency among others.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 03:35:30 PM
Stiffer started resonating the static field of coils with our Earth ground frequency and discharging the increased capacitance into LED's to generate electricity.

Next, he resonated a deeper nested "Ground Frequency" that he discovered, from a more powerfull Gravity source within the Earth's center. Lidmotor amplfied it by Crystal.

Tesla's (wireless theory) can be applied to transmit power and signals through this deeper ground. The "Quanta".

Lidmotor amplified this frequency with a Crystal Oscillator. He succeeded at this. He could blink it and send a Morse code signal instantly to Mars with a receiver. His wireless power is traveling through the Quanta layer, not the Earth static field like Tesla's.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 06:23:32 PM
What are the odds that the Magic Stiffler frequency of 13.56 Mhz would yield a quotient of 260, the number of sacred days in the Mayan Tzolk'in year (to the decimal point), when divided by the "Mayen Loom" factor of 52?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 07:08:21 PM
12/60 time is from Sumer; That's the one we use to tell time. Mayan time was 13/26. That's the one they used to tell time.

Sumer time was an abstract product of clay wedge economics, not a deeper "Cosmic Harmonic" deduced from observation of natural cycles like the Mayan.

Terestrial gravity describes a parabola like our Galactic center. We occupy the rim area of a "Black Hole".
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 07:23:59 PM
"What’s a quantum computer?

To understand why, you need to understand how quantum computers work since they’re fundamentally different from classical computers. A classical computer uses 0s and 1s to store data. These numbers could be voltages on different points in a circuit. But a quantum computer works on quantum bits, also known as qubits. You can picture them as waves that are associated with amplitude and phase. Qubits have special properties: They can exist in superposition, where they are both 0 and 1 at the same time, and they may be entangled so they share physical properties even though they may be separated by large distances. It’s a behavior that does not exist in the world of classical physics. The superposition vanishes when the experimenter interacts (https://en.wikipedia.org/wiki/Quantum_superposition) with the quantum state".


A Quantum grid would share the same properties, except it would operate in a Macro Dimension!.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 08, 2019, 07:40:42 PM
Google Quanta Computing needs to partner up with Quntacom, Synchro's Macro-Quanta wireless power and signal transmission company based in Garabito Costa Rica. A tax free zone.

Lidmotor's first transmission signal would act as the transfer of a micro "Quantum Qubit" on the Superluminal Macro plane "Quantum Space Cellphone".

I suggest we reincorporate in Costa Rica as "QuantaGoogleCom". (QGC)
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 09, 2019, 10:22:04 AM
13.56 Mhz is the "Common Denominator" frequency of the Universe. Lidmotor turns his receiver coil sideways and we can see it illuminate the LED's in his video. Normally induction would fail to work at 90 degrees. Power is transferred via the Quanta. The circuit has insufficient voltage to power the LED's brightly via the Quanta; However if Lidmotor traveled a long distance with his receiver, he would be able to detect a wave modulation transmitted from the source.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 09, 2019, 02:05:40 PM
I'm still skeptical... but i found 13.56 MHz crystals on ebay and ordered some.   :)
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 09, 2019, 02:32:22 PM
Start here:

https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s (https://www.youtube.com/watch?v=PqsVQPLXi3E&t=3s)

What is inside the coils ?  Single layer air coils ?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 09, 2019, 02:38:33 PM
What is inside the coils ?  Single layer air coils ?


The L-3 coil is single wire air core. This coil is precision wound and has a specific inductance and resonant frequency that resonates at that 13.56 Mhz with the Crystal. Dr. Stiffler formerly sold them. Try and Email Lidmotor to find out how to get one.

The Crystal resonates the "Static Field" of the coil. There is no electrical connection.

Do you have a signal generator?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 09, 2019, 02:50:01 PM
The L-3 coil is single wire air core. This coil is precision wound and has a specific inductance and resonant frequency that resonates at that 13.56 Mhz with the Crystal. Dr. Stiffler formerly sold them. Try and Email Lidmotor to find out how to get one.

If it's an air coil i can easily make one, and tune it to 13.56 MHz.


Quote
The Crystal resonates the "Static Field" of the coil. There is no electrical connection.

In Lidmotor's video the crystal is part of the circuit, isn't it ?  The output of the oscillator goes from the coil to the LED panel, and then to this crocodile clamp thing on the right side, which acts as some sort of 'virtual ground' ?


Quote
Do you have a signal generator?

Yes, i have an Agilent DDS generator which can also generate 13.56 MHz, with milli-Hz resolution.   ;D
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 09, 2019, 03:37:49 PM
If it's an air coil i can easily make one, and tune it to 13.56 MHz.


In Lidmotor's video the crystal is part of the circuit, isn't it ?  The output of the oscillator goes from the coil to the LED panel, and then to this crocodile clamp thing on the right side, which acts as some sort of 'virtual ground' ?


Yes, i have an Agilent DDS generator which can also generate 13.56 MHz, with milli-Hz resolution.   ;D


Look, you're really set up nicely for this test! Let me explain a little more. The Neo magnet can substitute for the Crystal. The 13.56 Mhz is the resonant frequency of the Neo magnet's boundary layer. Stiffer attaches a wire from his signal generator set at 13.56 to a L-3 coil then one side of a stack of Neo magnets; Then he exits through an LED array. The coil is tuned to resonate with the magnet static field, and the Crystal merely generates the frequency cheaply. I'll try and upload the relevant videos:

https://www.youtube.com/watch?v=FFhRx8PgK8c&t=29s (https://www.youtube.com/watch?v=FFhRx8PgK8c&t=29s)


In this video Stiffler generates power by sandwiching a capacitor between Neo magnets. The static field begins to resonate and generates voltage through a FWBR into a capacitor:


https://www.youtube.com/watch?v=FFhRx8PgK8c&t=29s (https://www.youtube.com/watch?v=FFhRx8PgK8c&t=29s)
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 09, 2019, 11:02:25 PM
Both the transmitter and the receiver need a 13.56 Mhz crystal. Only then can we hope to modulate the amplitude and phase in one and get the isomorphic signature in the twin.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 01:08:44 AM
Can you make a paint drawing with as much detail as possible?

Box diagram.

Organize all your stuff.

To me this looks extremely complicated, for Dr stiffler to say its hard is a bit of a bummer, so I need all the help I can get.

But that dont mean its no good, I just think it would be better if you layed out your thoughts in a more compact manner.

However, if the guy who initiated me to this idea is acting like an uncooperative autist dude, I might as well totally ignore all of it.

You seemed to have studied this alot. Your failed experiment, what was the setup? What would you like to improve?






Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 09:42:42 AM
The "Magnetic Field" is both inside and outside of the magnet, or coil. The "Static Field" is both inside and outside of the magnet or coil too.

We can sense the "Magnetic Field" as physical pressure. We cannot sense the "Static Field" because it is not in the physical World. The static field is infinite voltage. It's in the background, everywhere from the the onset of the Universe. We refer to it as: Quanta, Ether, Vacuum, Plenum etc.

Two resonate "Static Field" Frequencies are both separate and identical when viewed from their different dimensional perspectives. Two magnets and two crystals resonating their static fields simultaneously at the same frequency is not anything we really need a detailed drawing to help describe. (I'll attempt one anyway)

People find this intermediate level project difficult because they keep trying to run electrical current into it, with an incomplete understanding of the "Static Field". There's really nothing to it!

"Magnetism is Matter" and "Static Field is Energy". They exchange states at the boundary layer of the magnet with a power ratio of E=MC2 at 13.56 Mhz. These rates and power ratios are the same in the Earth's core and at the center of the Galaxy.

Stienmetz conceived of this Unified Field Theory, and Einstien applied it to the Physical Universe. There is no room for "Counter Space" in Einstien's theory!

13.56 is the frequency of the Mass Energy exchange in the Galactic and Quanta LC tank, and very close to a Mayan sacred number: 52X260. (Plus the 13 Moon Day out of time leap year factor: 13X28=364-365.25=1.25 .25X4=1).

P.S.

I brought this Mayan divisor up to Dr. Stiffler once. and he assured me he didn't get it to add up that way as a connivance.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 11:50:25 AM
We are modulating Non-Magnetic energy. Magnetism has an insulating strength of a 90 degree Lorentz force to energy. Magnetism is a wall to energy.

There exists a Macro Quanta and a Micro Quanta with no difference between them. Photon's are nothing more then frequencies in the Quanta. Light travels in a field of Infinite Energy. This same "Infinite Energy" field is in the micro plane we use to Quantum compute through. Stiffler's "Static Field" frequency obeys the laws of Quantum Physics, not our customary ones.

Modulating the amplitude of a Stiffer frequency in a broadcaster and detecting a reaction in a reciever, generating it's own wave in resonance, would amount to a major (Quantum) advance in our sciences of power and communication.

Both Dr. Stiffler and Lidmotor supply plenty of schematics. The challenge presented here in this thread is to construct two units and attempt a signal transfer.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 03:35:40 PM
No time to watch lidmotor or Stiffler, wouldnt know where that schematic is at.

Why dont you include that in a paint diagram, to go along with these boring lines of text.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 10, 2019, 04:01:27 PM
I sent a PM to Lidmotor some minutes ago. Maybe he finds some time to post something here.   :)

The 'theory' about the special 13.56 MHz frequency is still beyond me.


I think the most important point is to get a *concrete* and *detailed* description how to set up an experiment which shows unusual effects. The description should include everything necessary to replicate it. In the videos not everything is clearly visible and not everything is explained. I don't have the time to figure everything out by try and error. This might take months or years. I want to see something 'special' which convinces me that there is something worth investigating, and if i have seen this i will invest more time and effort into it. But i'm not willing to invest my time without seeing any positive results, and others telling me 'you did something wrong' all the time.   :-\

One of the basic principles of science is that everything is published i a way which allows others to reproduce the results without needing to start from scratch every time.

Title: Re: "Quantum Receiver".
Post by: skywatcher on December 10, 2019, 04:22:29 PM
Additional remark on describing experiments:

In some cases videos are fine, but in most cases some high-resolution photos together with a written explanation gives a much better understanding.

Many videos on YT are blurry and shaky, the camera is held with one hand and with the other hand something is done, the audio often is hard to understand (especially if it's not your native language) and all this leaves you wondering about the details. Sometimes i wonder why people still seem to use 30 year old camera equipment. High-resolution cameras are affordable for everyone today. And any still picture is better than a underexposed, blurry and shaky video.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 05:29:26 PM

1352 in Mayan: Look at the values of the number places.

top=400

middle=20


bottom=1
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 05:31:51 PM
*concrete* and *detailed*

This site has been replaced by space cadet autists and delusionnal ego types that spin their wheels in a loop.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 05:33:37 PM
Additional remark on describing experiments:

In some cases videos are fine, but in most cases some high-resolution photos together with a written explanation gives a much better understanding.

Many videos on YT are blurry and shaky, the camera is held with one hand and with the other hand something is done, the audio often is hard to understand (especially if it's not your native language) and all this leaves you wondering about the details. Sometimes i wonder why people still seem to use 30 year old camera equipment. High-resolution cameras are affordable for everyone today. And any still picture is better than a underexposed, blurry and shaky video.


Try and get something from that frequency the way Strffler does, by just oscillating a piece of tinfoil with the capacitance from your scope electrode at frequency with No Power!
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 05:45:04 PM
That is a paint drawing alright.

Great, It works just like mayan symbols, wow, thats amazing.

Its 100% clear to me how the Stiffler device works and how to replicate.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 06:39:57 PM
The Earth and it's physical environment are like a bubble at the bottom of a deep sea of infinite voltage. The static frequency reduces impedance between the layers to the physical World. A pathway of conduction opens and energy flows in from the Vacuum of Space.


Stiffler's diode loop, at his resonant frequency, is a capacitive antenna for this Vacuum power.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 07:05:31 PM
No idea what you said, but it sounded beautiful.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 07:42:18 PM
"The coincidence of the annual cycles of the apses (closest and further approach to the sun) and calendar dates (with seasons noted) at four equally spaced stages of precessionary 26,000-year-cycle".


26,000 years? A 260 day year and the Galactic Denominator?
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 07:47:13 PM
You know what? You are pretty smart and good at this.

Keep it up.

Maybe some crazy autist will understand you and build the device you imagine.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 08:00:19 PM
You know what? You are pretty smart and good at this.

Keep it up.

Maybe some crazy autist will understand you and build the device you imagine.


Do you guys know what an "Avramenko Plug" is? An LED with two reversed diodes connected together and to the ends of the LED. Do you know what it's good for and how it works?

Here's a tunable receiver that can receive the 13.56 frequency:

https://www.youtube.com/watch?v=fOkkF4pr23s (https://www.youtube.com/watch?v=fOkkF4pr23s)


An L-3 coil resonating at 13.56 Mhz from a Crystal oscillation (Signal Generator) no power, will illuminate an LED wirelessly with this simple kind of LED diode antenna. Just holding the plug close to an oscillating crystal at 13.56 Mhz should enough by itself to generate a current in the LED. A slow guy could handle that.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 09:47:30 PM
work of genius;
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 10, 2019, 10:12:40 PM
Placing the LED where the spark gap is above, would make, 3 diodes end to end in a loop from Avramenko's patent; Stiffler's diode loop collects the same static energy. Without a coil or magnet, modulating this loop will work fine too.


Modulating the static field in this loop opens a spillway for Quantum Power from the Infinity of Space.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 10, 2019, 10:52:16 PM
Ok smarty pants.

What is your opinion on the Steven Marks TPU?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 12:37:01 AM
Ok smarty pants.

What is your opinion on the Steven Marks TPU?


I think there's something to it; He worked with amps and apparently was log jammed by an overheating problem. The Capacitor coil of Hendershot and Akula look more like capacitive resonators..
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 12:55:09 AM
"Intel Corp. unveiled a chip Monday meant to speed the development of commercially viable quantum computers. Code named "Horse Ridge," the cryogenic control chip is meant to control multiple quantum bits, or qubits, which must be maintained at a few degrees above absolute zero. Unlike traditional bits, which take on a value of either "0" or "1," qubits are considered to be able to exist in multiple states simultaneously in a superimposed quantum state, allowing for more complex calculations. So far, quantum computing has been demonstrated in experimental conditions".


This chip needs to be cooled down to nearly absolute zero to function. What advantage would a room temperature version supply?
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 12:58:41 AM
Ok then, When you have time, I would like you to study it more carefully.

And then propose to me 3 coil designs.

Your designs will go into an automatic test bench.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 01:12:29 AM
https://www.youtube.com/watch?v=qcT_D7yf6OY&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=8&t=0s (https://www.youtube.com/watch?v=qcT_D7yf6OY&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=8&t=0s)


14 diodes in same direction loop illuminating 12 LED's with no electrical input! The clip lead from his L-3 coil to the frequency generator electrode at 13.56 Mhz, and his ground electrode hanging free.


                                       There is no current going from the wire to the loop!

This power is flooding in from the static field surrounding it and circulating to it's ground discharge in the LED's. The capacitance resonance between the clip lead and the diode capacitance is opening a switch way for power from the surrounding infinite voltage from Space that circulates in the loop!
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 01:37:22 AM
https://www.youtube.com/watch?v=1y3AcIlBSX0&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=11&t=0s (https://www.youtube.com/watch?v=1y3AcIlBSX0&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=11&t=0s)

At 3:28 in this video, Dr. Stiffler states that his L-3 coil has an SRF (Self Resonating Frequency) of 13.6 Mhz.


Everyone of Dr. Stiffler's and Lidmotor's wireless power transfer videos features this 13.6 SRF single wire coil. That's all it really takes to do any or all of the experiments. You need a scope and a signal generator to build one. Good luck! He used to sell them, maybe find one on eBay?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 03:02:22 AM

Slayer has a tuner to reach the 13.6:

https://www.youtube.com/watch?v=JNH6UMBo2LE
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 04:48:12 AM
So you think stiffler and Hendershot have something in common?

Look at the stacked magnets.

http://www.resonantfractals.org/PCC/Hendershot.html

And look at those nodes, I wonder where Bruces electron ejection theory fits into this.  I'd be ready to bet he is trying to maximize this effect.

https://www.youtube.com/watch?v=pux_QHARA5Y

But the show stopper for Hendershot is just the coil, its too long to wind, versus a TPU that could be machine wound if you were to test many.

What can I do that Libra Spirit didnt do? The guy is top quality. All I got more is that I watched Bruce TPU's electron ejection video, I dont feel confident at all with Hendershot.

Find me those coil designs synchro1. For the TPU.

Some metallic or soft material looped/pulsed, with coils on top also pulsed but perpendicular, so 4 pulses ( Am not sure now anymore). Maybe an initial pulse train is given to this loop then closed and disconnected.

Figure it out I guess, what causes the chain reaction, you are the esoteric wise man, not me.

Play with this idea, Its like the evolution of Stiffler, because first of all his house is a palace, his videos are excellent photoshops at worst, and the power was satisfying.

Vs your tech, with unproven power capabilities, perhaps very meager.

Play with them coil ideas  synchro1.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 11, 2019, 11:59:54 AM
https://www.youtube.com/watch?v=1y3AcIlBSX0&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=11&t=0s (https://www.youtube.com/watch?v=1y3AcIlBSX0&list=PLO6FJVqlxatcX-8A4L7fhyUUlYJcdNziq&index=11&t=0s)

At 3:28 in this video, Dr. Stiffler states that his L-3 coil has an SRF (Self Resonating Frequency) of 13.6 Mhz.

But he also says that it would work with other frequencies as well, if everything is tuned to resonance.And 13.6 MHz is not 13.54 MHz.


Quote
There is no current going from the wire to the loop!
RF needs no direct wire connection to transfer energy. Some years ago when i experimented with HF transmitters and magnetic loop antennas i also saw weird effects sometimes, but everything was explainable in the end. I still don't see anything really remarkable here.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 12:45:42 PM
But he also says that it would work with other frequencies as well, if everything is tuned to resonance.And 13.6 MHz is not 13.54 MHz.

RF needs no direct wire connection to transfer energy. Some years ago when i experimented with HF transmitters and magnetic loop antennas i also saw weird effects sometimes, but everything was explainable in the end. I still don't see anything really remarkable here.


@skywatcher,


You will catch on eventually. Once again; It's not RF energy, it's power from the Vacuum of Space. There is only a capacitive link, not RF magnet wave. There's no Radio Wave that could carry enough power to illuminate 12 LED's to full brightness!


Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 01:23:35 PM
The Universe filled with infinite voltage beyond the boundary of light travel over distance in an instant and never lost any power. Energy can not be destroyed.

A diode loop impedes current flow in one direction. The pressure of the "Lorentz Force" against this dielectric is at 90 degrees. The right hand rule dictates that the 90 degree force turns the energy same way! So as Dr. Stiffler states; Current flows spontaneously through this loop from the difference in potential between the diode layers and the infinite voltage of the Ether.

Now that leaves us asking; How do we get the current out of there? He first gives it a place to go, then provides a way to help it run in.

There's a field of "Infinite Voltage" surrounding the diode loop! This is pure potential. Modulating the static field at 13.52 Mhz (Mayan number) unlocks a "Transmission Keyhole" for the high potential to flow from the vacuum of surrounding Space, to the discharge destinaination inside the LED's.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 11, 2019, 02:30:08 PM
You will catch on eventually. Once again; It's not RF energy, it's power from the Vacuum of Space. There is only a capacitive link, not RF magnet wave. There's no Radio Wave that could carry enough power to illuminate 12 LED's to full brightness!

LED brightness is not a precise power measurement, and brightness is often overestimated.
It takes only a few mW to illuminate these LEDs.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 02:40:45 PM
LED brightness is not a precise power measurement, and brightness is often overestimated.
It takes only a few mW to illuminate these LEDs.


I know what your talking about, like the LED's a crystal radio can light, the "Electronic Smog Scavenger" etc.
The power in Lumens Stifler generates is many orders of magnitude greater then anything inputed into the circuit from broadcast radiation. He's not running a short wave radio transmitter in his test lab. Stiffer was cautious about that and used his microwave as a Faraday cage to demonstrate the actual nature of the power.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 03:04:58 PM
I believe it would help to name this the "Mayan Frequency" Established ideally as 13.52 Mhz but actually a range between: (13.50 Mhz and 13.60 Mhz) This is a the frequency of E=MC2. This is a harmonic of the voltage of Space. The cradle of light.

The transition of Mass to Energy in the rim of the "Dark Star" is going on in the center of the "Sun" and the "Earth". The polarized electrons in a Neo magnet fusion energize the magnet field and all four transitions take place at the "Mayen Frequency" The "Frequency of E=MC2"!
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 03:18:26 PM
All the I.C.'s from Stiffler's first SEC-13 Slayer's exciter, Lidmotor's Crystal, Stiffler's signal generator; All of them couple with a coil with (SFM) to resonate capacitively at 13.52 Mhz The Mayan Frequency.

It takes a frequency generator and a coil for any and all of these tests, and a frequency of 13.52 Mhz. 

Thst is the "Hertz" of the "Space Grid". The "Frequency of E=MC2 is 13.52 Mhz." The Mayan Frequency! The infinite cradle of light that Bed Rock's the Universe. 52 is 4 13's.

This frequency unlocks a keyhole to infinite potential surrounding Everything! This frequency let's us plug in to the Ether of Space.

The "Mayan Factor" assumes that the "Planetary Cycles", rotation rates and confluences are all a harmonic of a "Common Denominator"! This factor was extrapolated from Astronomical observations and Nature; The nine month gestation period of 260 days for example. They evolved a theory of evolution and Cosmology based on this view. This is a 'Unified Field Theory". They were aware of the Black Hole and the Cosmic Ray.


We can assign one factor to it. Call it May like Pi or Phi. An algebraic symbol.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 04:18:16 PM
Who is the researcher or famous physicist who talks so highly of the 13.52 Mhz?

Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 11, 2019, 05:15:27 PM
Who is the researcher or famous physicist who talks so highly of the 13.52 Mhz?


Your t.v. Remote control?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 05:58:09 PM
Cosmic Microwave Background (CMB). is different from the speed of light measured at 300,000 m/s.

CMB is a constant, so is the speed of light in a vacuum. Both factors have a common denominator of 52.

The Universe is past it's halfway point at 13 billion accelerating toward a more massive center that is beyond the frontier of light in the direction of the Great Attractor in the constellation Hydra along with Andromeda. The is a 26 billion year cycle of our pulsar Universe. Sacred number.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 06:12:42 PM
I dont understand.

13.52*52=703 Mhz

Wich is not even microwave frequency.

Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 06:16:21 PM
I dont understand.

13.52*52=703 Mhz

Wich is not even microwave frequency.

Micro-wave frequency is 300 Mhz to 300 Ghz. Plank calculated the speed of light at 300,000 M/S and the highest frequency from the same constant. Light is supported in a field of infinite energy that cradle's it in a carrier frequency. Also, we are attracted by Gravity from an unseen source too far for light to travel yet connected.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 08:10:35 PM
The exact speed of light is 299,792,458 meters per second divided by the "Mayan Frequency" of 13.61 Mhz equals a quotient of precisely 22, zero one place to the right of the decimal point, followed by a meaningless. irrational series starting with 27.


                        THIS IS PROOF THE FREQUENCY IS A "WAVE FRACTAL" OF LIGHT.

                                  It's no coincidence that this yields a pure harmonic.

This is a Plank constant harmonic frequency. This frequency is a "Denominator Frequency" that couples the Ether with the Physical Plane like a pipe fitting with two dimensions of inlet and outlet that connects a mainline to a house.


Acid Punk Visual 22 Hertz: Listen to the Vibe:


https://www.youtube.com/watch?v=y9sRGwO0hqQ (https://www.youtube.com/watch?v=y9sRGwO0hqQ)
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 08:59:56 PM
https://overunity.com/7359/salt-water-fuel-from-radio-waves/

Now tell me wich user got you started on the 13.56 bandwagon.

I know its not you.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 09:06:44 PM
https://overunity.com/7359/salt-water-fuel-from-radio-waves/ (https://overunity.com/7359/salt-water-fuel-from-radio-waves/)

Now tell me wich user got you started on the 13.56 bandwagon.

I know its not you.

Quote from the thread:

"Are there ways of generating 13.56 MHz "RF" at high energy efficiency? Many here believe there is".


We discussed them: You can start burning Salt Water at any time with the Crystal I just helped sell skywatcher.
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 09:10:12 PM
Yeah RFID uses that aparently.

Guess you in luck.

Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 09:21:35 PM
Yeah RFID uses that aparently.

Guess you in luck.


Stiffer got started with the Kanzius frequency then pulled it out of the background with his scope!


Lidmotor has a cool video where he Hydrolyzes water with a 13.56 Mhz Crystal.


https://www.youtube.com/watch?v=faEOqyMY1Ew (https://www.youtube.com/watch?v=faEOqyMY1Ew)
Title: Re: "Quantum Receiver".
Post by: Toolofcortex on December 11, 2019, 09:31:22 PM
Show me the video where Dr stiffler talks about 13.56 being special.

Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 09:34:43 PM
Show me the video where Dr stiffler talks about 13.56 being special.


Dr. Stiffler contributed to the Web site and participated in the Forums. Not everything he taught was revealed by him in his videos.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 11, 2019, 09:47:00 PM
To burn Salt Water like Dr. Kanzius, you would need to include a high voltage generator in the circuit. Lidmotor is Hydrolyzing with 12 volts. Connecting a power transistor between the Crystal and an Ignition coil would boost the potential to 40,000 Volts. This HV pulse would cause Salt Water to burn at that frequency.

Let me reemphasize; Dr. Stiffler noticed this frequency naturally occurring in the background with his Oscillascope. Got it! From Outer Space, not the Ocean, Understand?
Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 12, 2019, 03:52:13 AM
Micro-wave frequency is 300 Mhz to 300 Ghz. Plank calculated the speed of light at 300,000 M/S and the highest frequency from the same constant. Light is supported in a field of infinite energy that cradle's it in a carrier frequency. Also, we are attracted by Gravity from an unseen source too far for light to travel yet connected.


The theoretical max freq. was based on the same constant we named after him.
Our thinking was this is the shortest possible wavelength.
We have since then found shorter wavelengths and thus higher frequencies
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 10:03:55 AM

The theoretical max freq. was based on the same constant we named after him.
Our thinking was this is the shortest possible wavelength.
We have since then found shorter wavelengths and thus higher frequencies


@smOky2,


The thumb of measure blocks the view. We would have a "Translational Frequency" in (Quarts?). From the reference of any number base. 52 is the Co-efficient of any Odd system and 76 (76 is an automorphic number) Even. Martin Heidigger wrote a track on Metaphysics and the law of Identity, the origin of Mathematics. Watch this video, it's pertinent.

E. W. Davis and H. E. Puthoff, “On extracting energy from the quantum vacuum,”  It's already here!

https://www.youtube.com/watch?v=klXj198vY4A (https://www.youtube.com/watch?v=klXj198vY4A)

Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 10:31:49 AM
Dr. Puthoff told Dr. Greer he and his family would be killed if he tried to bring this "Quantum Energy from the Vacuum" out; Well Here's Jonny!

All anyone needs to do is to wrap a single wire air core coil with a (SRF) of 13.56 and they can help themselves. It really doesn't take that much What's the big deal?

Dr. Stiffler shows that you can place multiple diode rings in adjacency to the resonating clip wire and generate any amount of electrical power!

We have a new word: 13.52 is an "Automorphic Frequeny". The Ideal Frequency of 13.52 squared matches the last digit of itself.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 11:38:19 AM
The point I'm making that's different from Dr. Greer's is that if we receive power from the Quantum we can use that medium to transmit all our information too. A Quantum Web!

Let's say you had a diode ring and I had a diode ring; Suppose I could receive a single blink signal from you through it. I could receive an A.M. broadcast signal longitudinally next with a quick fix.

A Quantum "Ham Radio" club would eventually replace the entire linear Grid.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 01:07:07 PM
Dr. Puthoff told Dr. Greer he and his family would be killed if he tried to bring this "Quantum Energy from the Vacuum" out; Well Here's Jonny!

All anyone needs to do is to wrap a single wire air core coil with a (SRF) of 13.56 and they can help themselves. It really doesn't take that much What's the big deal?

Dr. Stiffler shows that you can place multiple diode rings in adjacency to the resonating clip wire and generate any amount of electrical power!

We have a new word: 13.52 is an "Automorphic Frequeny". The Ideal Frequency of 13.52 squared matches the last digit of itself.

If it's so easy, can you show us a picture of your quantum energy generator which powers all your electrical devices ?   ::)
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 01:48:03 PM
If it's so easy, can you show us a picture of your quantum energy generator which powers all your electrical devices ?   ::)


No; But we wouldn't need to Cryocool a diode ring to transmit a Quantum bit by field modulation.

The point Dr. Greer makes is that if Dr. Puthoff showed the picture of his, he and his family would be killed.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 02:41:39 PM
The 13.60 divided by the OM frequency of 432 Hz equals Pi or 3.14.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 03:26:08 PM
I have made a coil:  0.4 mm wire wound tightly on a plastic pipe of 16 mm diameter,  the coil is 68 mm long.
It looks very similar to the coils i saw in the videos. I measured an inductance of 76.1 µH.

I connected this coil to my frequency generator (via 1 kOhm resistor) and tried to measure the voltage of the sine wave on the coil with my scope.
But i don't see any resonance at all. The voltage remains more or less the same regardless of the frequency.
If i connect a capacitor (some pF) parallel to the coil i get a very weak resonance, but the 'peak' is some Mhz wide so i don't want this to call a resonance...

Edit: If i use a 100 Ohm resistor instead of 1k nothing changes.
 
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 03:34:55 PM
I have made a coil:  0.4 mm wire wound tightly on a plastic pipe of 16 mm diameter,  the coil is 68 mm long.
It looks very similar to the coils i saw in the videos. I measured an inductance of 76.1 µH.

I connected this coil to my frequency generator (via 1 kOhm resistor) and tried to measure the voltage of the sine wave on the coil with my scope.
But i don't see any resonance at all. The voltage remains more or less the same regardless of the frequency.
If i connect a capacitor (some pF) parallel to the coil i get a very weak resonance, but the 'peak' is some Mhz wide so i don't want this to call a resonance...


Right. Dr. Stiffler says it's not easy to learn how to do it. These guys like Lidmotor bought them from Stiffler as part of his SEC-13 kit. Stiffer says inductance measurement and formula won't serve as an accurate enough measure to arrive at the true (SRF). I don't know where to go from here. The precision of that coil is the critical criteria for any success. Lidmotor's L-3 coil is like a precious Jewal.

Dr. Stiffler stated that; You would need an introductory course in basic Scope Engineering before he could begin to teach the technique to arrive at the precise dimension.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 03:51:10 PM
If i understood it right, it's a normal single-wire, single-layer air-core coil. Nothing special. The only parameters which can be varied are wire size, coil diameter, and number of turns. But even if my coil has not exactly the right parameters, it should have a resonence somewhere, and this could be tuned to the desired frequency by varying some parameters, like numbers of turns for example.

Looks like you are spinning some theories here without even having done the most basic experiments...   :o
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 04:04:14 PM
If i understood it right, it's a normal single-wire, single-layer air-core coil. Nothing special. The only parameters which can be varied are wire size, coil diameter, and number of turns. But even if my coil has not exactly the right parameters, it should have a resonence somewhere, and this could be tuned to the desired frequency by varying some parameters, like numbers of turns for example.

Looks like you are spinning some theories here without even having done the most basic experiments...   :o


I have wound many coils and built multiple resonant tank circuits. I don't have a scope. I know from experience that you can strip windings back, and get the correct (SRF). You can get nearly close enough with the formula, then the scope work is needed. Stiffler's coils are like precious jewelry. I don't have the precision instruments needed to craft one.

I would offer to buy one from you if you could make one that works. You would find people behind me in line.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 04:30:08 PM
@skywatcher,


I would order a gross number if you could help find an outfit that would be willing to manufacture them with high tolerances.




Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 04:30:35 PM
I don't have a scope.

OMG... that's a really serious problem.  Hint: You can get one for free, there are companies throwing out perfectly working digital scopes on the junkyard only because they are 5 years old and so they 'have to' buy new ones. I'm currently using such a scope for which i didn't pay a single penny.


Quote
I know from experience that you can strip windings back, and get the correct (SRF). You can get nearly close enough with the formula, then the scope work is needed. Stiffler's coils are like precious jewelry. I don't have the precision instruments needed to craft one.

What precision instruments you need for winding a coil ?  These instruments are called 'fingers'. 


As i already said, the problem is not tuning the resonance, the problem is that there is not even a resonance, so i don't know what i should tune...

This is my coil:
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 04:40:30 PM
I just submitted an order to "Sag Harbor" industries for an estimate on the manufacture of the coils. I know what you're talking about because no one else can figure out how to do it either. It's like trying to make a transistor.

Professional equipment is really needed for it to come out right.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 04:48:18 PM
This is Lidmotor's coil. I can not see which wire size he used but the size of the coil is not so much different from my coil.
Maybe it's slightly bigger. But this should not matter because it can be tuned.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 05:02:01 PM
 Jonnydavro's L-3 coil is 620 turns of 26 swg wire.

62 of 26? Further evidence of "Mayan Synchronicty"? The "Runes of Saknussemm"? (Fictional character in Jules Verne novel) We may need the lagina brothers!
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 05:21:37 PM
I got some hints how to measure the SRF (use a 1-turn sensor coil around the coil) and now i'm at least seeing a resonance... which seems to be slightly above 20 MHz so i have to make the coil a little bit bigger.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 05:31:12 PM
I got some hints how to measure the SRF (use a 1-turn sensor coil around the coil) and now i'm at least seeing a resonance... which seems to be slightly above 20 MHz so i have to make the coil a little bit bigger.


You're on the right track. Dr. Stiffler makes mention of a "sensor coil". Keep it up, it's getting really exciting. Can you upload a video? They may act as "Crystal Receivers" for a Quantum radio club.

I will buy a scope if you can show me how you made one that works. A lot of people would benifit from that kind of instructional video.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 06:41:24 PM
I made a new coil with 32mm diameter. Initial length was 53 mm.  SFR was 8.08 MHz.
So i removed some of the windings... at 40mm length it was 9.48 MHz...
Now i'm at 12mm length (almost nothing left  :o ) and it's at 11.04 MHz.
But i'm getting a second peak slightly above this frequency... 


Maybe i will go back to the 12mm coil. 

Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 06:47:47 PM
What wire gauge are you using?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 06:54:49 PM
Jonnydavro's ratio would be 620 turns of 26 Swg = 0.018” / 0.457mm.
620 turns of 0.457mm wire would give a length of 283mm.  Which core diameter ?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 07:04:31 PM

Here's one from Blumoon:

L3= 100 turns of 0.3 wire on 3cm plastic tube.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 07:32:02 PM
Measuring Self-Capacitance and Self-Resonant Frequency SRF of Inductors


https://www.youtube.com/watch?v=tjbK4LsOQRk
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 07:34:09 PM
Two coils, built to the same (SRF) in that wavelength, connected to two variable capacitors and tuned to high "Q" resonance would send a short wave signal to a receiver over International distances through an antenna and ground. Tesla patented this "Double Tuner" and it's known as the "Ham Radio".
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 08:37:39 PM
Measuring Self-Capacitance and Self-Resonant Frequency SRF of Inductors


https://www.youtube.com/watch?v=tjbK4LsOQRk (https://www.youtube.com/watch?v=tjbK4LsOQRk)


Nice find. Excellent video. A square wave generator and an osciilliscope. DR. Stifler was right though, you need a basic course in Scope Tronnics to run the equipment.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 08:40:33 PM
13.59 MHz   ;D
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 09:04:08 PM
That scope chop would disappear if you rewound the coil with magnet wire. Looks like you have the technique down, congratulations!. Good chance that one will work! Won't be long now!
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 09:14:20 PM
Build an Avramenko plug to test it. The plug can have two reversed LED's connected to the ends of the two reversed diodes; It will work one way or the other. Connect one end of the coil to the signal generator electrode set to the 13.52 Mhz with no power, with the ground wire free; Then see if an LED illuminates in the static field in proximity to the coil.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 09:45:05 PM
Would it be better to use a higher diameter for the coil, and less turns ?The highest Q is achieved by using only 1 turn of very thick copper (magnetic loop antenna).Those antennas have a very high Q.
Or maybe a flat coil with only a few windings, like Tesla used ?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 09:59:09 PM
Would it be better to use a higher diameter for the coil, and less turns ?The highest Q is achieved by using only 1 turn of very thick copper (magnetic loop antenna).Those antennas have a very high Q.
Or maybe a flat coil with only a few windings, like Tesla used ?


This L-3 coil is I/2 of a short wave radio transmitter resonating tuner circuit tank. It is tuned to receive a power broadcast from Space. It's no different from a normal short wave radio transmitting or receiving coil. Does yours work?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 09:59:12 PM
There are also commercial 13.56 MHz antennas available, for RFID applications, like this one: 

https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html (https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html)


I wonder why nobody detected any strange effects with this frequency, when it is so widely used in the industry.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 10:04:45 PM
There are also commercial 13.56 MHz antennas available, for RFID applications, like this one: 

https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html (https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html)


I wonder why nobody detected any strange effects with this frequency, when it is so widely used in the industry.


Go ahead and buy a bunch of those. They're only 12 cents! I don't see any reason why they wouldn't work. That would really be something! The wire gauge is diaphanous though.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 10:29:35 PM

Here's a thicker gauge variety of spiral:

https://www.aliexpress.com/i/32859268160.html
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 10:38:10 PM
Here's a thicker gauge variety of spiral:

https://www.aliexpress.com/i/32859268160.html (https://www.aliexpress.com/i/32859268160.html)

I doubt those have a SRF of 13.56 MHz... with only 20mm diameter and only a few turns.

I now have 2 identical coils (like the yellow one i previously showed) and both have SRF of 13.44 MHz. That's as close as i can get.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 11:08:01 PM
Build an Avramenko plug to test it. The plug can have two reversed LED's connected to the ends of the two reversed diodes; It will work one way or the other. Connect one end of the coil to the signal generator electrode set to the 13.52 Mhz with no power, with the ground wire free; Then see if an LED illuminates in the static field in proximity to the coil.

*hmmm*

It's not enough to illuminate a LED (only 250 mVpp) but the strange thing is: the voltage does not depend on the distance between sending and receiving coil.   :o
(i varied the distance from 10 cm to approx. 1.5 m and in this range the voltage is constant)


I connected the sending coil to the generator (only one end, the other end open), generator was running at 13.44 MHz and 10V sinewave.
On the receiving coil i connected only one LED, no other diodes. What is the purpose of the normal diodes ? 

The LED itself is a diode so it should also work without additional diodes (?)
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 11:15:23 PM
*hmmm*

It's not enough to illuminate a LED (only 250 mVpp) but the strange thing is: the voltage does not depend on the distance between sending and receiving coil.   :o
(i varied the distance from 10 cm to approx. 1.5 m and in this range the voltage is constant)


I connected the sending coil to the generator (only one end, the other end open), generator was running at 13.44 MHz and 10V sinewave.
On the receiving coil i connected only one LED, no other diodes. What is the purpose of the normal diodes ? 

The LED itself is a diode so it should also work without additional diodes (?)


Do you know what an Avramenko plug is? Nothing connects to the end of the coil except the clip lead. You need to make a plug now to receive the capacitance.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 11:17:12 PM
With a wire (30 cm) at the open end of the coil the receiving voltage increases to 350 mVpp.
Ok, this is not a miracle, it's what ham radio operators do all the time: they are also using short vertical antennas with a coil at the base to tune it.
And everything i tested was near-field, less than one wavelength between transmitter and receiver.
It works even better when i change the frequency at the generator to 12.4 MHz.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 11:19:55 PM
With a wire (30 cm) at the open end of the coil the receiving voltage increases to 350 mVpp.
Ok, this is not a miracle, it's what ham radio operators do all the time: they are also using short vertical antennas with a coil at the base to tune it.
And everything i tested was near-field, less than one wavelength between transmitter and receiver.
It works even better when i change the frequency at the generator to 12.4 MHz.


You need an Avramenko plug to illuminate the LED. Do you know what I'm talking about?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 12, 2019, 11:20:14 PM
Do you know what an Avramenko plug is?

I googled it, and there seem to be many different versions...
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 11:32:56 PM
I googled it, and there seem to be many different versions...


Take 2 diodes and one LED. Connect the two diodes end to end positive to negative. The two LED electrodes connect to the two remaining opposite pole diode wire ends. It won't work if the LED is connected the wrong way. 3 components 3 connections. The coupled wires from the diodes act as the antenna. Try 20 volts.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 12, 2019, 11:48:27 PM
Stiffler has 12 LED's burning at full brightness with a 14 diode ring. What would happen if we stacked 12,000 diode rings in a steamer trunk? Could we get a "Luxor Spotlight" of 144,000 LED's running off a 9 volt battery?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 12:03:51 AM
Take 2 diodes and one LED. Connect the two diodes end to end positive to negative. The two LED electrodes connect to the two remaining opposite pole diode wire ends. It won't work if the LED is connected the wrong way. 3 components 3 connections. The coupled wires from the diodes act as the antenna. Try 20 volts.

Where is the receiver coil connected ?
Like here:  https://www.youtube.com/watch?v=PqsVQPLXi3E   if i interpret it correctly:  coil - diode - LEDs - diode - coil
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 12:15:25 AM
Where is the receiver coil connected ?
Like here:  https://www.youtube.com/watch?v=PqsVQPLXi3E (https://www.youtube.com/watch?v=PqsVQPLXi3E)   if i interpret it correctly:  coil - diode - LEDs - diode - coil


It's a 3 second job to build the plug. The plug will act as the test receiver. Everyone thinks it's funny that this is causing you a problem. I built my first one 15 years ago. I was just as confused, and you'll be just as surprised as I was when you discover how simple it is.

You don't need a physical connection to the coil to generate electricity at this point.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 12:29:50 AM
Like this one ?
https://overunity.com/6123/joule-thief/dlattach/attach/42163/image//
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 12:36:31 AM
schematic;
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 12:43:53 AM
Ok... i built it like in the pictures. The LED is working when i connect the plug to the open end of the transmitter coil.
But it's also working when i connect it to the generator output directly, without the coil. And it works at any frequency.

It doesn't work as a wireless receiver.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 12:49:06 AM
Ok... i built it like in the pictures. The LED is working when i connect the plug to the open end of the transmitter coil.
But it's also working when i connect it to the generator output directly, without the coil. And it works at any frequency.

It doesn't work as a wireless receiver.


Attach a clip wire to the end of the coil. What kind of diodes are you using? Fast switching Shottky are the kind preferred. Try turning the power up to 20 volts. Watch you don't burn the LED out. Check it if possible periodically if you're making contact.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 12:51:43 AM
1N4148
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 12:59:21 AM
1N4148

O.K. The diode checks out. You're very close to illuminating your first LED with wireless power from the Quanta. You made tremendous progress so far. Maybe it's time to take a rest and reflect on your achievements.

I'm sorry you went ahead with thick insulated wire. I didn't realize what you were up to in time. It was a mistake to use insulated wire on the coil. Insulation kills the resonance. Magnet wire is essential.

Think about what happened. You lit a bulb through a single wire. Why; The capacitance is seeping out between the wire and the insulation. It can't broadcast through the insulation. Understanding why the LED lit at all will show that your experiment was at least a partial success. That's not electricity! That small amount of power flowed in from the "Infinity of Space". There is a ground to the signal generator, but the ground from the generator is laying on the bench; So how could it be possible that there's electricity flowing through the coil wire? The voltage that lit the LED from the end of the coil wire was not generated by the signal generator, but channeled from the Quanta.

You officially succeeded! Congratulations.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 02:14:25 AM
It may be time to move down to the basement.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 03:17:22 AM
plug and plug schematic;  try and connect the coil to an aluminum plate, and retest the plug.
Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 13, 2019, 06:58:40 AM
There are also commercial 13.56 MHz antennas available, for RFID applications, like this one: 

https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html (https://www.alibaba.com/product-detail/Free-Sample-Long-Range-PET-13_60597153218.html)


I wonder why nobody detected any strange effects with this frequency, when it is so widely used in the industry.


100 of these for only $12
We could build one hell of a receiver


Have you considered that the power might be coming from our own human transmissions?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 10:30:31 AM
I'm sorry you went ahead with thick insulated wire. I didn't realize what you were up to in time. It was a mistake to use insulated wire on the coil. Insulation kills the resonance. Magnet wire is essential.

The method i used to measure the resonance (ringing the coil with a square wave) does not only show the SRF, it also shows the Q factor (how fast is the resonant oscillation decaying). I didn't see any significant difference between my magnet wire coils, and the other coils with the thicker insulated wire. However, there is a difference: the gaps between the windings are much tighter with magnet wire, this means that the capacitance between the windings is much higher.

But i have another doubt: the coils in the Lidmotor and DrStiffler videos can not have a SRF of 13.x MHz. That's completely impossible. I started with coils of similar dimensions, and their SRF was FAR below 13 MHz. I think the DrStiffler/Lidmotor coils had their SRF on a subharmonic of 13.xx MHz, maybe 1/2 or even 1/3 of this frequency.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 11:39:12 AM
This is a 60 watt Cree board; Look at the Avramenko plug connected to the Cree board on the left in the schematic. All the diodes are connected in series end to end with a 1 Ohm resistor between the diodes for power measurement.


The L-3 coil runs a 1 Ohm resistor between the SG electrode and the coil to the back plate of the Cree board, connecting all the LED grounds..


No electrical connections, but Dr. Stiffler is powering the equivalent of a 60 Watt bulb!
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 11:53:30 AM
This coil has SRF of exactly 4.52 MHz which is 1/3 of 13.56 MHz.
Coil length = 73mm, core diameter = 16mm,  0.4mm magnet wire

It has similar dimensions to the DrStiffler/Lidmotor coils.

But when i connect it to the generator (13.54 MHz) the LED of the AV plug does not even light up if i connect it directly to the end of the coil.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 12:05:19 PM
From this picture we can estimate the size of the LM coil.
The spacing between the breadboard contacts is 2.54 mm.
This gives us a coil length of approx. 52 mm, and a coil diameter of 17 mm which is identical to my coil.
The wire size might also be similar.

So maybe the LM coil resonates at 1/2 of 13.56 MHz = 6.78 MHz ?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 12:39:19 PM
@skywatcher,

Sounds like you may be measuring  the "Half Wave".
 
"Since the coil isn't grounded in this model, the first resonance is half-wave resonance".

This is only a radio coil calculator. (Click on the"X" to clear the advertisement).

https://coil32.net/theory/self-resonance-frequency.html (https://coil32.net/theory/self-resonance-frequency.html)

"If the coil operates at frequencies close to SRF, as for example in a helical resonator (https://coil32.net/design/helix-resonator.html) or Tesla coils, RLC-model gives incorrect results",
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 04:18:29 PM

@skywatcher,

  Quote from you:

 "at 40mm length it was 9.48 MHz... Now i'm at 12mm length (almost nothing left   ) and it's at 11.04 MHz".

Assuming you were mistakenly measuring the Half Wave, you would have been at 18.96 Mhz and should have increased the windings to lengthen the coil to lower the frequency to 13.56; Instead you released the windings to shorten it which indicates you may have decided on the wrong direction.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 05:22:49 PM
I changed one of my coils to get a SRF of 13.56 MHz / 2 = 6.78 MHz. But also this coil didn't do anything unusual.
No LED lighting whatsoever, not even if i touch the open end of the coil.

I will stop my experiments at this point because i didn't see anything unusual until now, maybe there is something but without any concrete infos how to do it (from people who have actually done it) i don't want to waste lots of time with endless experiments, without even having a clear direction where to go. I asked Lidmotor to come here and explain his experiments, but i didn't get an answer. His last activity here was more than 1 year ago so maybe he isn't active on this forum any more. I also wonder why he didn't post any updates on this topic on youtube. Maybe he discovered that all the effects he saw could be explained otherwise. I know from my own experiences that high-frequency stuff sometimes can be tricky, and it's very easy to fool yourself.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 07:44:35 PM
I changed one of my coils to get a SRF of 13.56 MHz / 2 = 6.78 MHz. But also this coil didn't do anything unusual.
No LED lighting whatsoever, not even if i touch the open end of the coil.

I will stop my experiments at this point because i didn't see anything unusual until now, maybe there is something but without any concrete infos how to do it (from people who have actually done it) i don't want to waste lots of time with endless experiments, without even having a clear direction where to go. I asked Lidmotor to come here and explain his experiments, but i didn't get an answer. His last activity here was more than 1 year ago so maybe he isn't active on this forum any more. I also wonder why he didn't post any updates on this topic on youtube. Maybe he discovered that all the effects he saw could be explained otherwise. I know from my own experiences that high-frequency stuff sometimes can be tricky, and it's very easy to fool yourself.


The insulated wire is responsible for the dysfunction. Lidmotor fielded many inquiries about his coil and rejected all of them because he bought it from Dr, Stifler years ago as part of his SEC 13 kit and knows absolutely nothing about it.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 08:14:29 PM
Anyone attempting to wind one of these coils needs to know in a advance that when testing for (SRF) with a sensor coil, the test coil needs to be GROUNDED to read an accurate frequency.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 09:21:37 PM
The insulated wire is responsible for the dysfunction.

No. I used one of the magnet wire coils for the last experiment.



Quote
Lidmotor fielded many inquiries about his coil and rejected all of them because he bought it from Dr, Stifler years ago as part of his SEC 13 kit and knows absolutely nothing about it.

Look at this video:  https://www.youtube.com/watch?v=hdWBj8Lyb1g

Lidmotor is replicating the Stiffler loop in this video. But it's at 11.x MHz, and he says in the video that it also works at any other frequency, as long as the coil is at resonance. So nothing about 'special frequency 13.56 MHz'. The comments below the video are also interesting. In one answer he says that it's dimming down when he adds a second loop. So the energy which can be received is always constant (as it should be expected) and is limited by the energy of the the generator output. There is no 'free energy' here. It's coming from the generator, 100% of it. I think Lidmotor knows this, and i also think this is the reason why he didn't work further on this project and moved on to other stuff.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 09:56:19 PM

The Exciter and Crystal:

"The Slayer Exciter shown here is a commercial unit called a 'Musical Mini Tesla Coil'.  It is an inexpensive China kit that can be purchased online thru several outlets".


Lidmotor is exciting the ring with his SEC-13 L-3 coil that resonates at 13.56 Mhz. I bet hooking his Slayer Crystal circuit up to one of those antennas might work as well.

Lidmotor says it's just a "Very Special Frequency". His Crystal is oscillating at 13.56 Mhz. I see nowhere any reference to 11 Mhz.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 13, 2019, 10:02:22 PM
Didn't you watch the video ?  He used a frequency generator at 11 MHz.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 10:05:18 PM
Here look at this. We're really in business now! Lidmotor says he's just faking the function generator, and using this "Tesla Music Player" in the video. Dr. Stiffler is mentioned at 3:12 in the video, so voila! Looks like we found our coil. Nice discovery, This one's a real treasure:

https://www.youtube.com/watch?v=GdhTVwSygqo (https://www.youtube.com/watch?v=GdhTVwSygqo)

Lidmotor could stack diode loops ten high and be exponentially overunity with this Music Video circuit and the crystal. Dr. Stiffler demonstrated that nested loops boosted resonance and output.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 13, 2019, 11:10:47 PM
Order's in:

Order total: US $6.88

Order number: 23-04283-16805

(https://i.ebayimg.com/images/g/QUQAAOSwWWtayuiL/s-l96.jpg (https://i.ebayimg.com/images/g/QUQAAOSwWWtayuiL/s-l96.jpg))

Mini Tesla Coil Plasma Speaker Kit Electronic Field Music DIY Project Play Gift
You should get this by Feb 20.

February 20? This is December 13. I have to wait over two months for this! Welcome to Costa Rica.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 12:56:45 AM
1 Set Mini Tesla Coil Kit 15W Mini Music Tesla Coil Plasma Speaker Tesla Wireless Transmission DC .... 13.56MHz I2C/SPI RFID MF RC522 Wireless Module.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 01:10:23 AM
Two "Tesla Music Coils" may be able to communicate via the quanta. I believe we may be looking at the finished project.
Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 14, 2019, 11:07:55 AM
With an intelligent telephone that has blue teeth
you can communicate to your coil and send quantum
music through the etherspace.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 12:31:38 PM
With an intelligent telephone that has blue teeth
you can communicate to your coil and send quantum
music through the etherspace.


Buy one or two. I ordered three! We can try for a Morse Dot! Two of them in adjacency coupled in resonance would act as a "Short Wave" radio transmitter. Are you in Europe?

We could probably start talking through them on that wavelength with the sound circuit. We can start a "Music Coil" Ham Radio club; A "Party Line".


How about "Marcaroni" the "Spider Web Antenna Pasta".!


                                                       "The Marcaroni Dish"
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 02:08:42 PM
The "Music Coil" is playing songs from a cell phone in the video. The circuit coverts digital to longitudinal waves. This signal should carry the video as well, and if a second unit were turned on in resonance, a video could appear on a cell phone like a blue tooth video. (Blue Tooth Short Wave)


This would open the way up for a Ham style "Music Coil Skype Web" in parallel with antennas and grounds.


This amounts to the "Quintessential" high water mark achievement of "Light Gimmick Wizardry"!
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 05:58:10 PM
@skywatcher,


I clicked on the wrong video, lucky for us, watching the 11 Hrs signal diode loop and got the "Music Coil" by mistake.

Here's the Music Coil in action:

https://www.youtube.com/watch?v=F7zBvOEJSP4 (https://www.youtube.com/watch?v=F7zBvOEJSP4)


The "Music Coil Kit" has an L-3 coil tuned to a (SRF) of 13.56. Lidmotors signal generator diode loop and L-3 with wire clip decreases the coil's (SRF) to 11 Hrz because the wire clip increases the Impedence and raise the frequency  by (RLC) resonancee formula, so the signal generator frequency may need to be lowered. Dr. Stiffer doesn't tell us this, but the kit supplies the coil for $6.98. Now we can duplicate the experiment with a a signal generator like Lidmotor.

Regardless, we need a coil tuned to this frequency to get it to work with a signal generator anyway, and one's included in the Kit.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 14, 2019, 10:13:24 PM
The "Music Coil Kit" has an L-3 coil tuned to a (SRF) of 13.56.

No. The coil has too many turns of thin wire. I would estimate the SRF of this coil well below 5 MHz.

I also don't see anything special in this video. This small Tesla generator is throwing out lots of RF power (you can see this if you look at the heat sink) so it's no miracle that everything is lighting up near it. You can do the same with every HF transmitter.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 10:16:24 PM
No. The coil has too many turns of thin wire. I would estimate the SRF of this coil well below 5 MHz.

I also don't see anything special in this video. This small Tesla generator is throwing out lots of RF power (you can see this if you look at the heat sink) so it's no miracle that everything is lighting up near it. You can do the same with every HF transmitter.


Your right, the circuit is a real power hog. Four 9 volt batteries and an Inverter would run the Crystal transistor version.



Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 10:20:08 PM
1 Set Mini Tesla Coil Kit 15W Mini Music Tesla Coil Plasma Speaker Tesla Wireless Transmission DC .... 13.56MHz I2C/SPI RFID MF RC522 Wireless Module.


What do you make of this information?
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 14, 2019, 10:30:47 PM

What do you make of this information?

I don't know where you got this from. There are many ebay sellers for this item.

http://www.icstation.com/mini-music-tesla-coil-plasma-speaker-plasma-loudspeaker-tesla-wireless-transmission-kits-module-p-12005.html
On this page you can find lots of pictures and videos about this generator.
In one picture you can see '0.12/350T' printed on the PCB. I think this means 350 turns of 0.12mm wire. You could enter this data into the calculator to get an estimate for the SRF. But i'm sure it's not 13.56 MHz. Not even close.
Title: Re: "Quantum Receiver".
Post by: skywatcher on December 14, 2019, 10:35:28 PM
A BD243 transistor is used in the kit, which has a transition frequency of 3 MHz. So we can assume that the working frequency is well below 3 MHz.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 14, 2019, 10:40:54 PM
A BD243 transistor is used in the kit, which has a transition frequency of 3 MHz. So we can assume that the working frequency is well below 3 MHz.


The circuit is complex. How do you know what the transistor is for? We'll find out after my models arrive, but the posted operating frequency for the Toy is 13.56.

Here's a video of Lidmotor adapting the "Music Coil" to a Stifler SEC circuit:

https://www.youtube.com/watch?v=2Xi0Vv3qHq4 (https://www.youtube.com/watch?v=2Xi0Vv3qHq4)


Quote from Lidmotor:


"This is the coil from the Mini Tesla Coil kit being used on my old homemade  Dr. Stiffler SEC 15-3 Exciter.  The coil worked great"! He identifies it as an L-3 coil.
Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 15, 2019, 12:09:40 AM
You “assume” it is operating at the low-freq characteristics
Because this transistor is primarily used as a power-gain MOSFET
However, it makes a perfectly useful switch at higher frequencies
Though the current gain curve levels out at 1


How did you see that it was a BD243?
I can’t see anything in these pictures, he’s got them upside down
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 12:28:32 AM
Lidmotor has identified the Music Coil as an L-3 coil. He's running the wireless transmitter off a 12 volt D.C. battery and a cool transistor, not 24 A.C. transformer volts with a heat sink! Plus he says the coil works great.

I guarantee you that this "Music Coil" would help illuminate an Avramenko type Stiffler diode bridge from a signal generator like the videos.
Title: Re: "Quantum Receiver".
Post by: sm0ky2 on December 15, 2019, 06:36:34 AM
What does LidMotors Stiffler set-up have to do with 13.56 million cycles per second?
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 11:40:29 AM

Watch this: Lidmotor's running a 110 volt LED panel at full brightness from a 9 volt battery. COP has to be over 10,000. This circuit will illuminate the LED panel with 9 volts through a "Music Coil".

https://www.youtube.com/watch?v=PqsVQPLXi3E&t=7s (https://www.youtube.com/watch?v=PqsVQPLXi3E&t=7s)

This 9 volt Crystal circuit could illuminate a Stiffer diode loop. The question haunts us; How many "Diode Loops" can be fully lit by the same field? Stiffer demonstrated that multiple diode loops reinforce each other and grow even brighter as more LEDS are added due to capacitance resonance.

However; The focus of this thread is the "Quantum Telegraph" not the "OU loop".
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 01:07:52 PM
Skywatcher appears to be really confused because he said the "Music Coil" was lower in frequency because the wire was finer. This is backwards!

Anyone can see that Lidmotor's L-3 Stifler SEC coil is very close in size to the "Music Coil". Skywatcher said he estimated the (SRF) of the "Music Coil" at 3.5 Mhz because the coil is smaller is exactly backwards because it would need to be three times as large to be that much lower in Hertz.

Lidmotor shows how to tune the air core coils with a ferrite core by increasing the coil's inductance when penetrating the air core with the ferrite rod thereby lowering the frequency. Just like increasing the size of a capacitor would lower the frequency in an LC tank. Increasing either Henries of inductance or Farads of capacitance lowers LC frequency, and the inverse is the same; Reduction of either value will increase frequency.
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 06:23:57 PM

Watch the Input Voltage when this tester illuminates an additional 120 volt panel of LED's:

https://www.youtube.com/watch?v=F3bjYHG1jfg&feature=youtu.be (https://www.youtube.com/watch?v=F3bjYHG1jfg&feature=youtu.be)
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 07:01:40 PM

Lidmotor discusses the possibility of modulating the transmitter signal with the addition of a trimmer capacitor. What's the likelyhood that these units could communicate between each other from the far reaches of Space?

https://www.youtube.com/watch?v=4_9kBBPCJoE
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 15, 2019, 08:06:53 PM
Voltage has a "Scaler Value". The addition of a trimmer cap connected between the base and collector of the  "Slayer Music Coil" transmitter would modulate the amplitude of the "Scaler Longitudinal Wave".

The addition of this trimmer capacitor should allow the transmitter to modulate the voltage through the Quanta to the transmitter. Anyone can see how this would differ from the transmission of an electromagnetic wave through "Physical Space", not the "Energy Dimension"!

Lidmotor already built the finished "Quanta Space Phone" from these "Music Coil" parts. I plan to replicate and test it's Quanta transmission and reception characteristics.

Lidmotor is attepting to regulate the frequency of his "Tesla Music Coil transmitter". The unseen advance by Lidmotor includes the modulation of Scaler Potential. This is a longitudinal Scaler Value.  This modulation takes place outside Physical Space in the Quanta.

Voltage is not transmitted from the transmitter to receiver through Space by radio wave; It's received instantly via the Quanta!
Title: Re: "Quantum Receiver".
Post by: synchro1 on December 16, 2019, 01:51:43 PM
Voltage has a "Scaler Value". The addition of a trimmer cap connected between the base and collector of the  "Slayer Music Coil" transmitter would modulate the amplitude of the "Scaler Longitudinal Wave".

The addition of this trimmer capacitor should allow the transmitter to modulate the voltage through the Quanta to the transmitter. Anyone can see how this would differ from the transmission of an electromagnetic wave through "Physical Space", not the "Energy Dimension"!

Lidmotor already built the finished "Quanta Space Phone" from these "Music Coil" parts. I plan to replicate and test it's Quanta transmission and reception characteristics.

Lidmotor is attepting to regulate the frequency of his "Tesla Music Coil transmitter". The unseen advance by Lidmotor includes the modulation of Scaler Potential. This is a longitudinal Scaler Value.  This modulation takes place outside Physical Space in the Quanta.

Voltage is not transmitted from the transmitter to receiver through Space by radio wave; It's received instantly via the Quanta!


Voltage modulation could transmit digital Wi-Fi data.