Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Creating TPU Steven_Mark  (Read 84240 times)

DavidWolff

  • Jr. Member
  • **
  • Posts: 75
Re: Creating TPU Steven_Mark
« Reply #180 on: November 15, 2019, 12:16:31 AM »
This site monitors the earth’s heartbeat
http://https://www.disclosurenews.it/en/schumann-resonance-today-update/


Any receiver tuned to a multiple of this freq.
will be able to harness energy from it


A resonant (tank) circuit and appropriate transistor, can amplify it.


This is what the TPU is designed to do.
Tesla also built an equivalent circuit
Mr Smoky2 I think we have all tried that out over the past 10 years or so, I'm pretty sure it doesn't work in that mode!
PS your hyperlink fails for me too  8) :o
Dave

endlessoceans

  • Full Member
  • ***
  • Posts: 137
Re: Creating TPU Steven_Mark
« Reply #181 on: November 15, 2019, 12:21:57 AM »

Last, get a current data reading of the Schumman
I believe it was approaching 8 last time I checked?
And do the math down to a ‘reasonable’ length for you to handle


And always remember: Steven left us everything we need to know



If SM left us everything we need to know then this site would have a hundred replications by now.   Opposite is true.  SM told the public only what was necessary to completely muddy the waters so that NOBODY would ever be able to replicate based on WHAT HE SAID.  He was a liar and versed in the art of misdirection.


1)  Schumann Resonance is NOT just one freq.  The Schumann resonances (SR) are electromagnetic oscillations of the Earth-ionosphere cavity at frequencies of 7.8, 14, 20, 26, 33, 39, and 45 Hz.

2)  I almost guarantee that his device has nothing to do with those particular resonances  .SM himself showed a number of TPUs in different sizes and ALL of them ran at vastly different frequencies.  One was at the thousands of HZ.  Go watch the videos again. 

3)  There are other forces at work that it may have been based on and he did NOT say anything about those.  That is what is more interesting.


sm0ky2

  • Hero Member
  • *****
  • Posts: 3948
Re: Creating TPU Steven_Mark
« Reply #182 on: November 15, 2019, 05:02:16 AM »
1) you are on the right track, but your math needs to be more precise,
as it has to be carried out into a manageable length of wire.


2) He told us why they were different sizes.


3) the only forces at play are positive feedback.
  (constructive interference)
the entire system has to be designed to the base signal.


It doesn’t have to be the earth’s freq.
These days there are thousands to tap into.

onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Creating TPU Steven_Mark
« Reply #183 on: November 19, 2019, 08:15:54 AM »
Endlessoceans
Quote
If SM left us everything we need to know then this site would have a hundred replications by now.   Opposite is true.  SM told the public only what was necessary to completely muddy the waters so that NOBODY would ever be able to replicate based on WHAT HE SAID.

I guess it would depend on your perspective and what you think he said.

In my opinion the best clue SM left was probably the one everyone ignored when SM said to consider all the things which could happen in a single length of wire. It's silly isn't it because we know everything about everything and we have nothing to learn about a silly wire. However as we know every individual part inside that wire is moving near the speed of light. That wire contains enough internal atomic/molecular energy to level a small city if only we could access the energy.

Fission and fusion are one very expensive and complicated way however I suspect some people found easier methods. Think of it this way, nuclear fission, as in an atomic bomb, creates a chain reaction liberating massive amounts of latent atomic energy within matter. However what if we only wanted a little energy... a little kick?. Could we use a different low energy process to produce only a few high energy particles and knock a few electrons around to produce a little kick versus a thermo-nuclear detonation?.

Apparently the answer is yes and some real Engineers at the "SAFIRE project" say they have produced a low energy variation of cold fusion using a HV plasma in an almost table top unit. Imagine that, now what if we could take a bunch of wires and switches and produce a HV plasma and co-ordinate the electrical forces in such a way that it produced forces similar to SAFIRE which could look like anything. It could look like a motor-generator, a Tesla coil, a transformer... so long as the internal process produced similar results.

No energy from nothing, no secret sauce or over-unity would be required... just a little knowledge, understanding and a great deal of ingenuity.

Think of a thermo-nuclear device or the Sun then reduce it down to something half the size of your refrigerator like the SAFIRE device. Now reduce that down by the same magnitude to something the size of a component, say a commutator brush or switch. Why it could be that the missing ingredient, the secret sauce could be transmutation/cold fusion occurring in the plasma created in between the switch contacts as it opens under the proper conditions. That extra little "kick" which appeared in the circuit for reasons most couldn't explain.

Science is like that, science is like a box of chocolates and you never really know what your going to get under the right conditions. The we know everything and predetermination nonsense, that's for egomaniacs not real scientists because in fact there is more that we do not know than we could ever know. I mean, everything we think we know as tangible is actually 1% matter moving near the speed of light in 99% free space filled with terrawatts of Electro-magnetic energy ie. "Feynman's free space energy" ... so what do we really know of Energy?.

Quote
Physicists Richard Feynman and John Wheeler calculated the zero-point radiation of the vacuum to be an order of magnitude greater than nuclear energy, with a single light bulb containing enough energy to boil all the world's oceans.

Regards




onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Creating TPU Steven_Mark
« Reply #184 on: November 20, 2019, 06:51:46 AM »
Quote
Physicists Richard Feynman and John Wheeler calculated the zero-point radiation of the vacuum to be an order of magnitude greater than nuclear energy, with a single light bulb containing enough energy to boil all the world's oceans.

I added this quote so people understand that "Energy" was never the problem as we are obviously swimming in a sea of energy. All of the most intelligent scientists and physicists agree energy is everywhere in everything and it is only the misguided who think differently. So this notion of "getting energy" from somewhere is wrong as the energy is already present and what we want is to convert or transform energy.

My first experiments were based on basic observations of the TPU and it seemed like an obvious first step to me. The TPU configuration has horizontal collector coils with three control coils, equally spaced at 120 Deg, wrapped around the collector at right angles to it. This is a problem because one coil A wrapped around another coil B, at a right angle, cannot induce any amount of current in B. The changing magnetic field poles from coil A are acting in the same direction as the path of conduction of B which is longitudinal to it and does not work. In order to understand why we must go back and study Faraday's Laws of Induction to understand what Faraday actually said and more so what he implied. If you want to understand a law then we should read it in the words of the person who actually wrote it not some second hand interpretation.

However sometimes our experiments at the bench do not always agree with some often misinterpreted law written in a textbook. As it were I found I could induce a current with the coils at right angles because of another set of laws, Weber's Electrodynamic Laws, which supersede Faraday's Laws and do allow for a longitudinal force to produce induction. Which is kind of a kick in the pants isn't it?, sure the laws apply and are equally valid in the context they were implied but that does not change the fact there are two sets of laws for induction. Faraday's law for parallel induction and Weber's law for serial or longitudinal induction.

So I was wondering how many experimenters here found they could induce a current in a coil with the inducing coil at right angles to the induced coil?.

Regards


Turbo

  • Sr. Member
  • ****
  • Posts: 271
    • Youtube
Re: Creating TPU Steven_Mark
« Reply #185 on: November 24, 2019, 07:03:56 AM »

In order to understand why we must go back and study Faraday's Laws of Induction to understand what Faraday actually said and more so what he implied.

Regards

This is exactly what you should NOT do.
You can study Faraday's Laws of Induction until the end of time and it's not going to help you one iota.
The only thing that can and will help people is doing the specific tests and analyzing the feedback from it's results.
It doesn't matter what you believe or think or understand, these test results are undeniable, and especially, repeatable, and they will show you where to look next without wondering what it could possibly be in terms of your current understanding.

onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Creating TPU Steven_Mark
« Reply #186 on: November 25, 2019, 04:57:13 PM »
Turbo
Quote
The only thing that can and will help people is doing the specific tests and analyzing the feedback from it's results.
It doesn't matter what you believe or think or understand, these test results are undeniable, and especially, repeatable, and they will show you where to look next without wondering what it could possibly be in terms of your current understanding.

Which tests are you talking about?.
How are you analyzing the results?
Specifically...



onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Creating TPU Steven_Mark
« Reply #187 on: November 26, 2019, 05:52:37 AM »
I believe my question still stands...
Quote
So I was wondering how many experimenters here found they could induce a current in a coil with the inducing coil at right angles to the induced coil?.

This is what the TPU is and is reflective of what it must do and it does not matter if there are one hundred horizontal collector coil turns or one turn as the effect must be the same. The control coils must act on the collector coils at right angles which as we know is in violation of Faraday's Law.

Faraday's Law states the inducing coils field must induce and couple to the induced coils at which point Lenz Law is invoked. As such parallel coils have maximum induction and as one of the coils rotates through 90 degrees the induction falls to zero as the coils align at a right angle. The TPU coils are at right angles thus Faraday's law of induction cannot apply... so how does induction occur?.

I have done the experiments and what I have claimed holds true. Coils at right angles have literally no induction occurring with pulsed DC or AC currents. I am not saying the TPU cannot work and I believe it does, what I an saying is it cannot work using Faraday's laws of induction as we know them and it must be something different... so what is it?.

Regards


sm0ky2

  • Hero Member
  • *****
  • Posts: 3948
Re: Creating TPU Steven_Mark
« Reply #188 on: November 26, 2019, 06:09:20 AM »
Consider for a moment, Faraday’s postulate.


In our 3-dimensional universe, can two coils not be
Both perpendicular to one another, while also being
both perpendicular to the electric field?


The magnetic force is considered to be 0.
This is simply a convenience. It is “actually” along the length of the wire.
Perpendicular to the flow of current in the first wire
the 2nd wire experiences no force, but the Current does!


Test this on your oscilloscope

sm0ky2

  • Hero Member
  • *****
  • Posts: 3948
Re: Creating TPU Steven_Mark
« Reply #189 on: November 26, 2019, 07:35:41 AM »
Currents in parallel wires attract each other on opposite directions.
In like directions they repel


Why?


What direction is the force?


Now,.......


If your base frequency oscillation was “free”, or omnipresent
What happens?


Harmonics are a convenience for us “humans”
Because, quite frankly a wire 38287670.2426564 meters long
Is not reasonable.




citfta

  • Hero Member
  • *****
  • Posts: 1050
Re: Creating TPU Steven_Mark
« Reply #190 on: November 26, 2019, 12:33:00 PM »
I believe my question still stands...
This is what the TPU is and is reflective of what it must do and it does not matter if there are one hundred horizontal collector coil turns or one turn as the effect must be the same. The control coils must act on the collector coils at right angles which as we know is in violation of Faraday's Law.

Faraday's Law states the inducing coils field must induce and couple to the induced coils at which point Lenz Law is invoked. As such parallel coils have maximum induction and as one of the coils rotates through 90 degrees the induction falls to zero as the coils align at a right angle. The TPU coils are at right angles thus Faraday's law of induction cannot apply... so how does induction occur?.

I have done the experiments and what I have claimed holds true. Coils at right angles have literally no induction occurring with pulsed DC or AC currents. I am not saying the TPU cannot work and I believe it does, what I an saying is it cannot work using Faraday's laws of induction as we know them and it must be something different... so what is it?.

Regards


If what you are saying is true then how does a clamp-on amp meter work?  The clamp part does in fact go AROUND the current carrying wire.  So some current or at least voltage must be induced into the sensing circuit of the meter.  And all the older ones were only mechanical with no batteries or outside power source yet they could still move the meter needle.  Maybe the very weak coupling between coils at right angles is part of the secret to the TPU working.




Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Creating TPU Steven_Mark
« Reply #191 on: November 26, 2019, 02:25:00 PM »
Currents in parallel wires attract each other on opposite directions.
In like directions they repel


Why?


What direction is the force? that depends on 2 or 3 factors going on here (bucking coils spring to mind


Now,.......


If your base frequency oscillation was “free”, or omnipresent
What happens?


Harmonics are a convenience for us “humans”
Because quite frankly a wire 38287670.2426564 meters long
Is not reasonable.
Thanks for the advice but this isn't good avice  ;D try connecting a good earth or 'MASS' like a car battery. to some sort of catcher, it will pull itself to a harmonic of the earth resonance, you would know that if you experimented instead of quoting gremlins.

onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Creating TPU Steven_Mark
« Reply #192 on: November 26, 2019, 10:28:39 PM »
Citfa
Quote
If what you are saying is true then how does a clamp-on amp meter work?  The clamp part does in fact go AROUND the current carrying wire.  So some current or at least voltage must be induced into the sensing circuit of the meter.  And all the older ones were only mechanical with no batteries or outside power source yet they could still move the meter needle.  Maybe the very weak coupling between coils at right angles is part of the secret to the TPU working.

The clamp part of an amp meter which goes around the main conductor is a circular iron core. The secondary winding's are then wound around the circular iron core not the main conductor. It's pretty ingenious because the main conductors magnetic field is parallel to the circular iron core which is why the core can induce the secondary winding and produce a voltage.

However as I said if a copper wire is wound around a single conductor the inducing magnetic field is at right angles to the conductor and induction does not occur. In my opinion first we have to understand how Faraday Induction actually works then understand when it does not work then apply this to the TPU. The collector coils are being induced by the control coils however it is not Faraday Induction it is Weber Induction. Everyone is using the wrong kind of induction which is why they cannot make the TPU work.

In fact in the late 1800's to early 1900's there were many different theories to explain thousands of extraordinary phenomena which were discovered. However Maxwell discarded most all the things he couldn't explain and all the alternate theories and only published a few of the most popular theories in his work. Maxwell did this because there are in fact thousands of different variations on the laws of physics we know and it would be almost impossible to include them all. So you see, what you know is only the condensed version of physics not the whole story.

Regards





Toolofcortex

  • Hero Member
  • *****
  • Posts: 577
Re: Creating TPU Steven_Mark
« Reply #193 on: January 02, 2020, 11:15:31 PM »
Ok Here is my proposal.

And I now am holding Turbo in high regard due to this funny way of going about thing, and respectfully invite him to discuss the TPU in his thread, as I always did.

My starting point is simply the Bruce TPU video, and going from there. Something that can be mastered here is 3D modelisation of electrical vectors, for understanding of how exactly it works.

My prosalsal is simply this. "Fuel" material is used to provide electrons, this material is powered, pulsed, in order to release electrons, surrounding this is 3 perpendicular powered/pulsed pickup coils, wich may or may not be overlapped across the fuel loop.

A certain alloy wire is turned in a loop, this alloy must be well researched.

When the frequency/phase is right, the power is collected in parallel format.

Now the next part is finding the frequency.

kajunbee

  • Full Member
  • ***
  • Posts: 161
Re: Creating TPU Steven_Mark
« Reply #194 on: January 03, 2020, 10:12:06 AM »
I'm not much of and artist but someone might be able to make sense of it. I am having trouble visualizing the magnetic field of the inner conductor of TPU. As I see it current will flow in a loop around the circumference of the inner wire, not end to end. But there should be a magnetic flux in the core loop. The inner loop is the equivalent of the laminated core in a transformer. But since it's a loop of wire , instead of laminated steel sheets what would this magnetic field look like. Would it be the same as the flux in a laminated core or not. I'm not sure if I have the direction of the loops correct but you get the idea.
« Last Edit: January 03, 2020, 04:11:29 PM by kajunbee »