Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Flywheel Generator Project  (Read 13273 times)

SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: Flywheel Generator Project
« Reply #15 on: August 11, 2019, 04:34:17 PM »
Hi alvaro_cs, you're fine and thanks for looking at the thread.
This project aims to use mostly off the shelf items and homemade items, such as the homemade pulse motor controller.
Though a cheap boost converter may work also, for adjusting motor speed from 12 volt battery.

peace love light  :)

SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: Flywheel Generator Project
« Reply #16 on: August 13, 2019, 03:19:54 AM »
Hi all, the project is progressing well.
Completed the flywheel support structure and painted the flywheel to protect against moisture.
Will work on the motor support structure next and v-belt and pulley install.
peace love light  :)
(https://i.postimg.cc/FdXLMZSL/flywheel-generator-project-2.jpg)

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Flywheel Generator Project
« Reply #17 on: August 13, 2019, 01:54:32 PM »
Nice wood work SkyWatcher123. Looking forward to see more :-)


Vidar

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: Flywheel Generator Project
« Reply #18 on: August 13, 2019, 04:53:21 PM »
Hi Skywatcher123,   I really look forward to seeing your results with this.   A lot of youtube vids seem to show this type of setup working well but since I don't trust the truth in many youtube vids I will look forward to your results as I completely trust your information.   One thing I've come to conclude over some years of looking at this type device (I think Chas Campbell device was the first one I saw that seemed legit) is that the flywheel needs to be fairly heavy and that a slightly loose belt on the shaft may be important - not loose enough to slip but loose enough that it might set up an oscillation.   Just some thoughts and not at all sure this is correct.   Best of luck in this project.

SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: Flywheel Generator Project
« Reply #19 on: August 16, 2019, 10:18:01 PM »
Hi e2matrix, thanks for the kind and positive words.
Will do the best I can to see some positive results.
Finished mounting the motor and motor pulley support structure.
Next step is to get a v-belt that fits , meausred around 48" long, for the 3:1 pulley ratio on motor to flywheel shaft.
Then, will start mounting the permanent magnet alternator and long v-belt.peace love light  :)
(https://i.postimg.cc/G9SLGGQT/Flywheel-project-motor-mounted.jpg)


ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #20 on: August 16, 2019, 10:31:30 PM »
Your design is pure shit, did you even look at the Chas Campbell video and try to replicate his build? Why is his thing so shaky? How to interrupt the driver wheel from wheel to source and back again and just give enough force
to drive it.

If we are to believe the pseudoscience, then at least follow some theory other than just connecting 1v1 on a static frame. I believe however that this technique does not work since Chas Campbell has not been heard from.

 believe I have solved these devices, and will refer to them as kinetic oscillators, they simply are a form of pulse magnetic motor, but with pulleys.

But not like Bedini, this is like ideal magnetic situation, tangantial and shielded, so dollar for dollar it is in fact superior technique.

The trick revolves around pulley squeeze  by hidden eccentric or on a hidden eccentric on floating bouncy wheel and any variation thereof.

So you must engineer the bouncing frame accordingly and make use of that, with the pulleys.

Thus creating pulses of tangantial force, and this causes OU when right freq is hit, and this depends on load, too much load and the oscillation dies.

Think variable loading jus before the point of degeneration. The big Flywheel absorbs this but your must regenerate it.

ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #21 on: August 17, 2019, 05:04:00 AM »
Know your place padawan, listen to rakarskiy.


SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: Flywheel Generator Project
« Reply #22 on: August 21, 2019, 06:01:39 PM »
Hi all, still working on the flywheel project, just taking my time and not rushing it.
Have the alternator and long belt lined up and mounted, need to get a short belt for the drive motor and then adjust both sides for proper belt tension.
All positive and helpful replies welcome.  ;) :)

ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #23 on: August 21, 2019, 09:15:32 PM »
Bad, bad design.

Show the design and I will confirm if good or bad. You need 3 wheels, + a static bouncer wheel. The motor has a wheel between it and the intermediate bouncy frame wheel. The intermediate wheel drives the big wheel with proper frequency according to your load, wich should be adjustable. The tension of both ends of the intermediate should be adjustable, the weight of the eccentric should also be adjtstable The pulley themselves can act as a spring to a certian extent but a static wheel can also absorb that shock. But your design objective is to find the perfect middle ground of tensions, so as  your eccentric intermediate wheel can act as a sort of clutch/transistor, and minimize wasted friction with pulleys in this exchange.

Keep in your place, padawan. Negative feedback is what you need.

ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #24 on: August 30, 2019, 10:04:49 PM »
https://www.quora.com/Does-centrifugal-and-centripetal-force-acts-on-the-electrons-of-an-atom

Investigate this.

If the electron and protons are being affected by centrifugal force, is it possible that they can cause a wave like motion that persists in the flywheel and helps us multiply our force and reduce our recharge cost? And we just "keep pulsing" to keep it all working.

Maybe using acceleration/deceleration cycles accomplishes the miracle you seek.

The question I am asking myself is first of all, how does this even look like inside the solid balanced flywheel, in terms of mass distribution and the motions of protons, do the protons rotate around an axis or they oscillate back and forth? Second, is if the rate at wich you are accelerating/decelerating your flywheel with described technique(based on my gut instinct and watching the video) is even fast enough to have an effect (beneficial) on the molecular structure.

Because I am pretty sure that Chas Campbell uses the eccentric technique I described for you.

ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #25 on: August 31, 2019, 08:00:23 PM »
I saw your little comment on energeticforum.com

For an old guy, you sound awful lot like a thin skinned millenial.

This is because I know exactly who I am dealing with, a girly dude, a "my feelings first" type of builder,  red paint vs not having anything adjustable, I know you dont feel adding all the gear I told you,you like doing it your way,  just another a non-cooperative old guy. These people I like to troll, I dont like them, they cramp my style and discourage everything because they are just bad.

Why do you do have do do these projects? Its not for you, you should do gardening and help around with other things.

Its too bad you know... Your whole attitude. Because I have a special design for this, a flywheel experimenters dream, a fully adjustable test bench, a researched design that is a "doubler" of the effect I described for you, basically an assault of the Flywheel by massive force inputs, the kind of numbers you could never get with magnets, with carefully placed pulleys, and tension wheels.


ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #26 on: August 31, 2019, 09:39:52 PM »
I'm taking over this thread, I'm the captain now thx  8).

here is some interesting litterature 

http://www.zamandayolculuk.com/html-3/space_warp_principles.htm

http://www.resonantfractals.org/Magnetism/Flywheel.htm

SkyWatcher123

  • Hero Member
  • *****
  • Posts: 844
Re: Flywheel Generator Project
« Reply #27 on: September 01, 2019, 06:11:51 AM »
Hi armcortex, thanks for the productive aspects of your posts, the other things and assumptions will be ignored and you are forgiven always.


Please continue to share, It's not your thread or mine, it's all of ours, to share ideas with mutual respect.

It is unfortunate you have difficulty with that, though I will read anything you wish to share.

Though it is my choice which path I take, just as you are free to choose your path.peace love light  :)

ARMCORTEX

  • Hero Member
  • *****
  • Posts: 717
Re: Flywheel Generator Project
« Reply #28 on: September 01, 2019, 06:47:13 AM »
https://www.youtube.com/watch?v=2qyvX9j5i3U

https://overunity.com/4672/accelerating-forces/msg96915/#msg96915

Listen to David Lowrance, he is special.

I am not forgiven, you are forgiven, for now. But you must become more obedient.

Read David's post, and see what applies and what doesnt. Then, see what I said about the eccentric and see if it applies (Its my opinion), then, go watch the other Chas Campbell videos.

Now, try to improve your design to succeed. Your flywheel needs to act like a magic dean drive but Force is at the circumference right where you want it instead, the energy comes from the Dean drive effect.

alextecmen

  • Newbie
  • *
  • Posts: 49
Re: Flywheel Generator Project
« Reply #29 on: September 02, 2019, 05:12:24 AM »
Flywheel Energy Multiplier Mini Project 2019

https://www.youtube.com/watch?v=XJ761y8G06g