Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: The solution !!!!  (Read 44664 times)

efusystem

  • Newbie
  • *
  • Posts: 2
The solution !!!!
« on: June 10, 2019, 05:48:24 PM »

Thomas Townsend Brown discovered in 1929 that a charged capacitor experiences a push towards the positive side.
Anyone can check this in a laboratory.

There's only one problem: Electric charges have very little mass, so ...
... according to the Law of Universal Gravitation, this effect is impossible.

This may seem like a paradox, but it is not.

The truth is that we can NOT apply the Laws or Principles of a branch of Physics to the phenomena observed in another branch of Physics (which also has its own Laws).

If we have two objects with different temperatures and we put them in contact, what happens?
What happens is that the object that is at the highest temperature releases energy to the one that has less until the temperatures are even.

Thermodynamics has its own Principles.

It would be a TOTAL absurdity to say that: "According to Ohm's Law this is impossible, because there is no intensity between the objects, the resistance between them is infinite, therefore there can be no heat transfer"

Faraday, in his experiments, discovered that a copper coil reacted to magnetic changes by producing electrical current.

What happens is that copper is a diamagnetic material, and in order to oppose the magnetism of the magnet, it must put its own electrons in motion in order to generate a magnetic field that opposes that of the magnet.

There is no magnetic energy "transforming" into electrons.
There is no kinetic energy of the magnet "transforming" into electrons.

The electrons come out of the copper of the coil to generate a magnetism opposite to the external to it.

The Principle of conservation of energy was enunciated for Thermodynamics, which is the branch of Physics that describes the states of thermal equilibrium.

And when it talks about energy, it refers only and exclusively to thermal energy.

It is NOT demonstrated for any other type of energy (nuclear, electrical...).

But we continue to use it to deny the possibilities of other branches of Physics that have their own Laws.

Making a simple experiment is an added job (no matter how small the experiment).

I guess it's much easier to "seem" smart by saying: "According to the second Principle of Thermodynamics ...", so you don’t have to experiment.

I leave a link for downloading a pdf of only 18 pages with drawings and little text.
I have tried to make it as simple and basic as possible to make it understandable by anyone (even if you do not have much knowledge of the subject).

I assure you that what it says is true, is science and of course verifiable.

I would not publish it here if I had not checked it myself.
The pdf clearly explains the principle on which systems like Tesla, Kapanadze, Gray… are based.

It only remains then to check it or deny everything (without checking or reading it).
 I recognize that the latter is much easier.

Greetings, Gentlemen.

https://www.4shared.com/office/SSQfWl-iee/EFUSystem.html

https://www.mediafire.com/file/ezikicxbgqvhqmz/EFUSystem.pdf/file

tomd

  • Full Member
  • ***
  • Posts: 144
Re: The solution !!!!
« Reply #1 on: June 11, 2019, 10:28:43 AM »
Makes more sense than anything else I've read.

 I think this principle applies to many of Don Smith's devices. In spite of what he said about the electric field resulting in a "heat death".

When I first watched this video https://youtu.be/XkAMNFKjds4 I new there was free energy but lacked the skills to create a suitable circuit.

tomd

  • Full Member
  • ***
  • Posts: 144
Re: The solution !!!!
« Reply #2 on: June 11, 2019, 10:48:49 AM »
Duplicate post deleted

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #3 on: August 23, 2020, 07:02:59 AM »
"The electrons come out of the copper of the coil to generate a magnetism opposite to the external to it"
This is exactly what's happening with AC impedance--the copper valence electrons break free from their orbits and come together to impede the externally applied AC. Actually, I don't think the electrons break-free in order to impede. It's just that the positive high voltage provides a greater attractive force to the electrons than does the copper atom, and the +HV in essence tricks the electrons into thinking that they have somewhere to go much like the positive of a charged battery is somewhere for the electrons to go. The impedance comes during the negative phase of the AC cycle when all of the freed electrons in the coil in essence butt heads with the negative of the AC cycle (like repels like). So forced current isn't the only way to get a coil to release its cemf! Electrons want to be where electrons are not. Electron-free positive High voltage is exactly where electrons want to be! So simple yet so elusive to those who are tunnel visioned! BRAVO!!!!!!!!!!!
« Last Edit: August 23, 2020, 09:03:03 AM by NdaClouDzzz »

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #4 on: August 23, 2020, 07:58:23 AM »
Makes more sense than anything else I've read.

 I think this principle applies to many of Don Smith's devices. In spite of what he said about the electric field resulting in a "heat death".

When I first watched this video https://youtu.be/XkAMNFKjds4 I new there was free energy but lacked the skills to create a suitable circuit.

What Don was talking about was forcing current into a coil to get it to produce a magnetic field as is traditionally done. You can never get out more than you put in by doing it that way. On the other hand, you don't need to force current into a coil to get it to produce a magnetic field if you use current-free high voltage at the coil's resonant frequency. Just think of how a crystal radio works. The impedance to AC is when your coil is in resonance and producing a tremendous magnetic field; hence "magnetic resonance".

conradelektro

  • Hero Member
  • *****
  • Posts: 1842
Re: The solution !!!!
« Reply #5 on: August 24, 2020, 01:23:36 PM »
To Efusystem:

I do not doubt that the "systems" described in the PDF-File "EFUSystem" generate spikes of high Voltage and very low Amperage.

I play a lot with electrostatic generators (electrophore, Wimshurst Machine, Triboelectric effects) and can also generate such spikes, even with up to a hundred spikes per second. The big problem is to find a practical application, since the overall energy output is very very low (in the Microamps). One can hardly light a single LED (it will always blink instead of shining continuously). Also gas discharge lamps will only blink. One can drive an electrostatic motor with these spikes, but the torque of the motor will be very very low.

So, did your wisdom lead to any practical applications? Or are you only engaging in theoretical speculations?

Greetings, Conrad

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: The solution !!!!
« Reply #6 on: September 25, 2020, 11:06:16 AM »
I think some guys found solution to this problem among them was Tesla. The solution is the way to generate strong magnetic field with HV low current. I think Tesla way was to use properly matched antenna and resonant rise to create amps and surrounding huge magnetic field pulses.

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #7 on: September 25, 2020, 01:46:58 PM »
I think some guys found solution to this problem among them was Tesla. The solution is the way to generate strong magnetic field with HV low current. I think Tesla way was to use properly matched antenna and resonant rise to create amps and surrounding huge magnetic field pulses.

Yes, Sir! The below video is a perfect demonstration of the magnetic field that the primary coil is generating from the resonance and applied low current high voltage. In the video, the primary coil is producing maybe 1% of the magnetic field that it could be producing with the correct amount of applied voltage. A length of copper wire is made up of an amount copper atoms. Those copper atoms each have a valence electron that will come free in response to a positive, electron-free high voltage. When those valence electrons come free, they will give off magnetic energy. The idea is to release the maximum amount of valence electrons that are contained within that length of copper wire, and in so doing, generate the largest magnetic field possible using only high voltage. At the resonant frequency of the coil, you will need a high frequency gauss meter to measure the magnetic field coming off of the coil. In the below video, if he would have increased the voltage in steps and measured the magnetic field from the primary coil at each voltage step/increase, he would have witnessed an increasing magnetic field. At some point in increasing the voltage, that magnetic field will no longer increase no matter how much voltage you put in. Why? Because the maximum amount of valence electrons contained within that length of copper wire will have been freed from their valence bonds. Joseph Newman recognized and documented this in his book "The Energy Machine Of Joseph Newman". Thus, a small amount of energy/power is used to generate a magnetic field with power far exceeding the input. Just study how a crystal radio gets its energy! To keep my explanation here short, I've tried to summarize the gist of phase one of a true free-energy device.


https://youtu.be/kQdcwDCBoNY

Bob Smith

  • Hero Member
  • *****
  • Posts: 733
Re: The solution !!!!
« Reply #8 on: September 27, 2020, 04:32:49 PM »
Yes, Sir! The below video is a perfect demonstration of the magnetic field that the primary coil is generating from the resonance and applied low current high voltage. In the video, the primary coil is producing maybe 1% of the magnetic field that it could be producing with the correct amount of applied voltage. A length of copper wire is made up of an amount copper atoms. Those copper atoms each have a valence electron that will come free in response to a positive, electron-free high voltage. When those valence electrons come free, they will give off magnetic energy. The idea is to release the maximum amount of valence electrons that are contained within that length of copper wire, and in so doing, generate the largest magnetic field possible using only high voltage. At the resonant frequency of the coil, you will need a high frequency gauss meter to measure the magnetic field coming off of the coil. In the below video, if he would have increased the voltage in steps and measured the magnetic field from the primary coil at each voltage step/increase, he would have witnessed an increasing magnetic field. At some point in increasing the voltage, that magnetic field will no longer increase no matter how much voltage you put in. Why? Because the maximum amount of valence electrons contained within that length of copper wire will have been freed from their valence bonds. Joseph Newman recognized and documented this in his book "The Energy Machine Of Joseph Newman". Thus, a small amount of energy/power is used to generate a magnetic field with power far exceeding the input. Just study how a crystal radio gets its energy! To keep my explanation here short, I've tried to summarize the gist of phase one of a true free-energy device.


https://youtu.be/kQdcwDCBoNY
So you're saying to bring the short primary into resonance? What is the effect of the primary's resonance on the secondary?
If I'm not mistaken, in a coil at series resonance, the inductive and capacitive properties of the coil (inductive above resonance and capacitive below resonance) cancel each other out.
Similar, but reversed with parallel resonance RLCs, where the below resonant inductance cancels out the above resonant capacitance.
So what exactly is the resonant primary doing to the secondary?
Respectfully,
Bob

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #9 on: September 28, 2020, 01:27:07 AM »
Greetings, Bob.
Bringing the primary into resonance is the first step. The second is finding the ideal voltage, i.e, the voltage which releases the maximum amount of valence electrons contained within the length of copper wire that you're using as your primary coil. The reason? The greater the amount of freed valence electrons the greater the magnetic field produced by the primary. This is Don Smith's "magnetic resonance".
The "effect" of the primaries MAGNETIC FIELD on the secondary is electromagnetic induction. What you do with that magnetic field after the primary is up to you. But the idea is to cause the coil to generate the largest magnetic field that it can using the smallest amount of current possible. This video should clarify it a little: https://youtu.be/x-1EKjOtrPM
This is all counter intuitive to the establishments way of creating a magnetic field using forced current.

Bob Smith

  • Hero Member
  • *****
  • Posts: 733
Re: The solution !!!!
« Reply #10 on: September 28, 2020, 02:10:18 AM »
Thanks NDA,
It makes sense to me, and it seems consistent with others have said regarding the DS devices, and magnetism being a key component. This is a very helpful hint. I'll catch the YT video when I get a chance this week.
Regards,
Bob

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #11 on: September 28, 2020, 02:56:19 AM »
The EFU pdf above and some deep thinking on the matter will help to clear the establishments fog and open doors you didn't even know were there.
Cheers!

NdaClouDzzz

  • Sr. Member
  • ****
  • Posts: 305
Re: The solution !!!!
« Reply #12 on: September 28, 2020, 08:17:03 AM »
Thanks NDA,
It makes sense to me, and it seems consistent with others have said regarding the DS devices, and magnetism being a key component. This is a very helpful hint. I'll catch the YT video when I get a chance this week.
Regards,
Bob

Rick Friedrich has taught a lot on this, although He can be a little difficult to follow sometimes as He doesn't break things down in the simplistic way that I do.
https://youtu.be/18kOGVfkoik

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: The solution !!!!
« Reply #13 on: September 30, 2020, 10:09:03 PM »
My intuition tells me that Tesla used some very strange coils as described in one of his early lecture and something closely related was then replicated in Edwin Gray motor which was known to convert electrostatic into large magnetic force.A. Hubbard was a boy interested in early radio systems, probably also knew the method of creating antenna to produce large magnetic field from small current. Amman brothers device had two antennas in form of metallic balls , possible they run current in circle creating near field radio and catching it until the avalanche produced strong magnetic current pulse they converted into DC huge power for driving their car ....the same used Tesla later...Of course all above are only speculations

v8karlo

  • Sr. Member
  • ****
  • Posts: 385
Re: The solution !!!!
« Reply #14 on: September 30, 2020, 10:27:43 PM »
And there is one more fact on Tesla.

He never used bucking coils in his search for ultimate energy source.

1. Because he was stupid and never saw their potential?

2. Because he tried bucking coils and saw no potential at all in them?


Was Tesla stupid person?

I would place my bets on 2.


What others say?