Free Energy | searching for free energy and discussing free energy

Mechanical free energy devices => mechanic => Topic started by: ARMCORTEX on May 09, 2019, 12:01:38 PM

Title: Physicist needed, will this self-loop?
Post by: ARMCORTEX on May 09, 2019, 12:01:38 PM
It would be nice to have a nice mathlab simulation of this model done by somebody good enough to upload the model?

Somebody with good education who can model this difficult to calculate conversion device.

Please, I dont need opinions of amateurs. I need numbers of pro engineer who wants a nice challenging model to practice.
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on May 09, 2019, 08:31:48 PM
https://www.youtube.com/watch?v=i0O0YKsBXUY

Like this...

load the center and watch it all desynch.

Is there people who are not just trash and actually know mathlab and can calculate this.

Site is filled with wankstas.





Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on May 16, 2019, 09:31:00 AM
Will it work?

It looks like a choo choo train.
Title: Re: Physicist needed, will this self-loop?
Post by: Geatnows on June 11, 2019, 09:10:12 AM
Get more knowledge. I like it. Thank you for giving advice.
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 14, 2019, 09:57:37 PM
Hello, is there a physicist good with matlab?

Please, no bullshit.
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 16, 2019, 06:54:39 PM
Are there actual researchers out there who know how to go about calculating such a device?

Or modeling it?

Or is this site just filled with wankstas? God damn internet shitted on every subject of interest.

Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 26, 2019, 06:01:42 PM
bla bla bla bla bla... All I see is trash

Here it goes again

Is anybody here good with mathlab and can help?

Is anybody good/smart and can help?

Nooooo.... Not u noobie, not ur trash, that guy, not you.



Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 27, 2019, 02:32:57 AM
https://www.youtube.com/watch?v=G5LcCdM4qzc

Quad setup, pulse driven.

Can it self loop?

This is a challenge for the highly skilled only, people such as myself.

Please come here, nooo not you...Him (or her), that guy(girl) who is of good pedigree/education. We can share this 30/70. Get the 70% I dont care.

I'll be in charge of cad design, machining, you confirm the numbers, we will need much optimization, special shaped, composite materials, high precision, high strenght  low weight arms.

I said NOT YOU, SMALL CHUMP! Go find your own project, cool kids only here GTFO.

Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 27, 2019, 06:46:27 PM
I just wanted to say that I am god of D2 on yt.

And soon god of D4 and D2R.

I am the man, the 1 man army.


Title: Re: Physicist needed, will this self-loop?
Post by: Low-Q on August 27, 2019, 11:35:43 PM
To answer your question: Your device will not work.


Vidar
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 01:47:20 AM
To answer your question: Your device will not work.


Vidar

O.. I was expecting this type of answer by a mongrel.

Rule #1 Please, I dont need opinions of amateurs. I need numbers of pro engineer who wants a nice challenging model to practice.

Thank you, have a good day.

I think you are just jealous, is what I think... Lil noooooobie.
Title: Re: Physicist needed, will this self-loop?
Post by: Low-Q on August 28, 2019, 12:02:24 PM
O.. I was expecting this type of answer by a mongrel.

Rule #1 Please, I dont need opinions of amateurs. I need numbers of pro engineer who wants a nice challenging model to practice.

Thank you, have a good day.

I think you are just jealous, is what I think... Lil noooooobie.
Not jealous, and not an amateur. Sorry, your device will not self loop. Even if your idea is unike, it is still a closed mechanical system. Such systems has been debunked/proved wrong every single time. People confuse force with energy, and do not know that energy is a product of force and displacement/distance. So you are the amateur. Not me ;)
Rule 2: Accept the truth even if you don't agree.
Physics and science isn't about opinions, democracy, agreements, or wishful thinking.
Fortunately for me, the burden of proof is on you.


Good luck.


Vidar
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 12:12:19 PM
You fell into my trap, this will be delicious mmmm.

And dont you think I know that? The in/out efficiency is like 20% on a single array, 50% on a dual array, and 75% on a quad array ( these numbers I got considering wheel diameters,  based on breaking point @ maximum torque value then substract sum of individual motor hp). There is angular speed and torque present on the shaft everywhere so I use power in comparison to power. I notice that the more moments of peak force repeats, the stronger the device will resist breaking untill breaking point, the single array is very fragile and has very poor efficiency.

So it works either in single array form, or in pairs, that are simply phase shifted based on the number of pairs you have.

My guess if that more and more arrays would "plateau" and a final value of 99% would be there since my arm components are weightless and frictionless, the "pendulum like" movement in the arm component is actually a damping factor here, I want it to be weightless if possible.

Having said that, you can see now that these  freewheeling bob weights are good candidates for "pulse force input mechanism", so this is a very unique situation that was never tried.

Its not possible to build more than quad array in the sim, wich represents my design above nor is it possible to test pulse inputs, wich is where a good system modeler (physicist) would be handy.

And no, I am not about to turn myself into a physics graduate just so I can be good enough with mathlab and system modeling to come up with definite results, neither do I expect that from you. So to be clear, you are not smart enough to know, you might think you are, but you are not.

And the same goes for all of those that came before you and flapped their gums on this forum.

You dont understand that pulsed flywheels unbalanced systems, can never be connected directly to the generator, this kills the pulse and all momentum, and you end up with stalled system. Here the fact that centrifugal force is used to keep the motion going does not kill the momentum, too much brake on the main staft simply lags the arms, once this happens the device stops abruptly and is too late nothing can bring it back even reducing the load.

But still, my idea shows that power is present on the shaft, and that the independant weight feel nothing untill a breaking point, wich intoduces lag and loss of resonance, my simulation cannot take into account pulse system efficiency of my ideal drive system, is simply has a motor, with an angular speed and torque slider.

It is said that kinetic energy is conserved, kinetic energy(in this case) causes motion, motion causes centrifugal force to have a  concentrated vector direction on an unbalanced wheel, wich causes its centerpoint to shift if its not totally rigid, such rigidity would causes immense force on bearings in any event, a problem wich cannot be overcomed unless higher rating longer cylinder bearing is used, and this is a longevity formula wich again, is complicated since not all cylinders will use at the same rate. You can use this shifting force and guide it via many ways, and even to generate a rotation with some torque in it, and losses in it. Yeah center point shift is an issue of loss but still it causes a nice elliptical trajectory and a mass can still be kept in motion and the dual arrangement pinches that in the direction I want. How efficiently can I keep these masses in motions is the point I am trying to make, and NO, you are not in your place to answer this in any quantifiable terms, put a zipper on your mouth.



My system is an "open system". But you know, this term is actually empty of all meaning, it is simply a non-professionnal term that was coined by Aaron Murakami.

You, and this site, are simply uncapable in calculating such a device in a phased array, so stfu, you assume things wich far surpasses you, based on the results of trash users, past and present.


Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 02:32:31 PM
Ok Low-Q has been educated.

Whos next?

Come flap your gums in my thread.
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 04:06:59 PM
You know what I need?

I need a person with much energy and social skills to present this in a more physics oriented forum where people are actually educated about science, not just pulse wood built bullshit pseuso-science.

I dont think I am the right person prepared to deal with these people, I will take this too personal...My beautiful invention.

I think my mind has been altered and I "believe that an impulse is somehow special" and would ignore whatever they say anyways since they will probaly just be a bunch of lazy dumbasses anyways.
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 10:31:05 PM
I am now accepting woodbuilder candidates.

Work you fools! Work harder!

Wear a helmet.

Title: Re: Physicist needed, will this self-loop?
Post by: citfta on August 28, 2019, 11:33:03 PM
Why don't you just build it.  Then you will have your answer.  Someone with your great intellect should have no problem turning your drawing into a working device.


Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 28, 2019, 11:59:59 PM
Why don't you just build it.  Then you will have your answer.  Someone with your great intellect should have no problem turning your drawing into a working device.

I think its better to waste other people's ressources before a physicist models it for me, in the way I am satisfied with.

But even then, I may suspect foul play.

But its good, I can see you are curious as well now that it sinks in. You are not really sure anymore are you ?

https://www.youtube.com/watch?v=vTuaXOFbLjs

8 of these, as symmetrical squeeze forward units, suspended in the air as drivers. I wish to investigate mass lag with impulse load such as an incoming pendulum bob, wich will be slower.

Flywheels have an infinite rate of transfer of energy, this is interresting.

Wichever method recharges faster the flywheel after a spontaneous load, direct motor connection or pulse magnets, to maintain perfect equilibrium with motions.



Title: Re: Physicist needed, will this self-loop?
Post by: conradelektro on August 30, 2019, 05:06:03 PM
Your design shows your high intelligence and your very inventive mind.

The design will turn all by itself, faster and faster, till it self-destructs. Therefore you should think about a break which keeps the turning of the device below a certain speed.

You have found the solution for the energy needs of mankind.

I wonder if you will give it away for free?
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 30, 2019, 05:23:40 PM
Conradeleckro, you are too kind.

But I fear these excessively optimistic comments just as I fear excessively negative comments, untill we know more. Ok, maybe I prefer the positive ones  ;)

This is because such a machine is a big endeavour, even for a professional fab shop.

This device is an interresting museum machine either way, it looks like a choo choo train.

Certainly there will be things to break it ;) That problem you speak of would be a nice one to solve right?  ;) It all depends on launch condition, this is a "computer launch" mechanism, once this happens it likes to stick to its resonance and almost auto-syncs.

If I will keep it? I am not keeping any more info at this moment... Yes it is mine, I do intend to patent it since I am the inventor of it, in part, the co-inventor is another youtuber.


Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 30, 2019, 05:56:03 PM
And this is why there must be good interest in this device.

Because it is big, and it is cool, and we cant just let this idea slip away because its just too mysterious.

Yeah its big and expensive and requires alot of work, that is why I came here and talked about it.
Title: Re: Physicist needed, will this self-loop?
Post by: conradelektro on August 30, 2019, 08:48:31 PM
.. Yes it is mine, I do intend to patent it since I am the inventor of it, in part, the co-inventor is another youtuber.


Everything has been disclosed in an open forum, therefore it is now in the public domain.


Too late for patenting!


The correct sequence of events should have been: do not tell anybody, patent the device, tell everybody. If you reverse this sequence, no patent.


Greetings, Conrad
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 30, 2019, 09:05:24 PM
Ok enough of this, its easy to get lost in these pointless debates about MIB/Patenting/who gets what, etc... Its hard to use our brains and predict the outcome of such a device, using the totality of the physics involved, and leave no rock unturned, all the secret techniques about "pulse orbital systems" if there is any.

You are entitled to think that this idea does not belong to me, it does.

I am simply sharing it with you.

You should always think in the back of your mind (ARMCORTEX invented this, I am forever grateful to this greater man).

Whats cool about this device if it were to work is that its too big to be really useful in any type of transport or flying object, wich is what the powers that be are really afraid of.

The dominant countries would still be dominant, thus changing nothing besides having a better environment.

So I believe this is fully safe and we may proceed with tremendous vigor. (Dont inject these subjects in my thread, leave your paranoia elsewhere)

When it comes to saving the world, I believe that I can get a satisfactory "piece of the pie", so talking about it is no problem at all.
Title: Re: Physicist needed, will this self-loop?
Post by: conradelektro on August 31, 2019, 06:01:52 PM
It was not me who put in the paranoia, you started with patents. So, I had to remind you how patents work.


I thought you are a world savior just out of goodness. Now you want a pie? How much of a pie? A slap on the back? Or a bit more?


Greetings, Conrad
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 31, 2019, 07:13:08 PM
I want a cheesecake, thats what I want.

http://sweelongtan.blogspot.com/2019/08/how-to-convert-centrifugal-force-into.html

I contacted the physicist who will answer our questions.

Now comes the time that you slackers should be comfortable with, sit back, do nothing, wait for smarter individual.

This site should be in competition vs eachother about solving this, I started this gangsta shit and this the mothefuckin thanks I get? Where are my physicists at?
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on August 31, 2019, 09:56:57 PM
http://www.inertialpropulsion.com/dean_drive.htm
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on September 01, 2019, 09:19:01 PM
https://overunity.com/4672/accelerating-forces/msg96915/#msg96915

Listen to David Lowrance, he is special.

It seems, that there may be more to this than I thought.

Now, do I even need a Physicist anymore if the orbital slingshot effect applies? This is basically a titan with a hammer smacking my weight at the optimal time of acceleration, should I arrange this with my drive scheme.

Of course the next turn is coming... But all those pair of pressures are reflected into rotation during the whole swing when it is in resonance, but at what % is the question, it seems to have the ability to push an elephant but not an elephant + 100 pounds... This smells powerful, but now I am losing centrifugal force should this be re-applied at a different angle under pulse, perhaps for a small time? Lol... No I think I need a physicist... This is truely a marvel on engineering.

I have created the mother of all mindfuck exeptions to newtonian physics. Somebody find a solution to this mindbender I beg of you.

I think I deserve my 10,000$, I will share 75% of this to the person who solves this.


Title: Re: Physicist needed, will this self-loop?
Post by: conradelektro on September 02, 2019, 08:53:16 PM
I have created the mother of all mindfuck exeptions to newtonian physics.

Again, your superior intelligence is showing, long live the new Newton!

Why do you need a physicist, you did it all by yourself?

What do you think a physicist will tell you?

Greetings, Conard
Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on September 03, 2019, 11:58:51 PM
Ok thank you Conrad, but its not necessary.

I feel like talking seriously now.

I know you are sad that I cant calculate it and show it works and you feel like making it but dont have enough money so you just troll instead.

These are the moments when you feel bad about not knowing more about differential equations and mathlab.

I also have a feeling that the theory of slingshot will be hard to model, since this is very "obscure" science, the degree at wich the centrifugal and centripetal are actually deflected to reach "out of balance" state wich is beneficial, I believe the rate of change of speed must very high, not smooth, with very steep derivative at that moment.

A model allows you to predict what will happen, its true for this device just as its true for a normal servo motor.

The power of these MIT kids is unreal, they can do this in a weeks work maybe. I'm such a bad scientist...



Title: Re: Physicist needed, will this self-loop?
Post by: ARMCORTEX on September 11, 2019, 08:09:37 PM
https://www.youtube.com/watch?v=_3sHn6LOu9A

The quest has ended, overunity can be provided.

Either by magnetic doudble sided pulse gun system, or with flywheel double squeeze method, force amplification will be available.

Should we be able to keep the weights synchronous and follow a constant frequency, Horsepowers can be harvested by simply pulsing a multitude of unbalanced weights if a stable and fast frequency we can optimize.

Spread across time such as our energy input is constant, but given as impulses of kinetic energy, wich = constant enery expenditure, but I believe it will be worth it.