Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: IEC Earth Engine First Magnet motor installed in Las Vegas  (Read 88298 times)

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #75 on: May 02, 2019, 10:22:11 PM »
Hi Ben, welcome back. Good to see you again.What abiout your Thomas motor ? Did you try to scale it up with the Orbo effect yet ?
Sorry for this offtopic question...
Back to the IEC Earth Engine:
Also I got more and more the view, that the IEC Earth Engine is not working...Surely it would have been presented in a different way, if these motors could really drive KWatts loads...
Maybe they just have a motor, that generates just a few MilliWatts or Watts and they just let the big flywheel accelerate over a long timeframe  from this low magnetic power input and then use the stored energy in the flywheel to generate some power from it...
But I doubt they could provide a few  KWatts for longer than a few minutes...

Vortex1

  • Hero Member
  • *****
  • Posts: 518
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #76 on: May 02, 2019, 10:31:03 PM »
Very simple to verify.  Put a 500 watt resistive load on the Alternator.Watch the RP'm. if they stay constant, Rat on...If they drop till it stops.....bah humbug.I guess that would be too easy!

Ben K4ZEP

Yes that would be too easy. And why not a small tabletop model continuously lighting a small incandescent lamp, as magnetics are downwardly scaleable. Make it such that there is no possibility of hidden compartments for batteries and let experts disassemble it after a lengthy run.

Oh I forgot, common programming technique is to dazzle the eyeballs so you need to make it very large e.g. Bhoudini's ferris wheel. A lot of spinning black and yellow safety tape helps with the trance induction, then the hypnotic spell is complete, just sign on the dotted line.

Regards

k4zep

  • Hero Member
  • *****
  • Posts: 650
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #77 on: May 02, 2019, 10:46:19 PM »
Hi Ben, welcome back. Good to see you again.What abiout your Thomas motor ? Did you try to scale it up with the Orbo effect yet ?
Sorry for this offtopic question...
Back to the IEC Earth Engine:
Also I got more and more doubt, that the IEC Earth Engine is not working...Surely it would have been presented in a different way, if these motors could really drive KWatts loads...
Maybe they just have a motor, that generates just a few MillieWatts or Watts and they just let the big flywheel accelerateover a long time from this low power and then use the stored energy in the flywheel to generate some power from it...But I doubt they could provide a few  KWatts for longer than a few minutes...
Off topic is OK with me.  It is good to be back.  The Thomas motor is just sitting on the shelf for now.  I never pursued the switching effect in it any further.  Maybe someday!
Also the "Put Put" motor that showed some anomalous behavior at very high voltages, but again, maybe later. 

As most on the list have built pulse motors, shifting field motors, shielded motors, etc.  What we are seeing is not all that newand from the long term results that we see, it is easy to get a jaded view. 

IF with a 20 watt average input to the governor and magnetic switching or mechanical motor driven switching, etc., they can get 500 watts out continuous with the "Plastic" motor, or 5-600 Watts in and KW out with the larger motors, they will have something.  I don't think they have demonstrated that to us here.  If the flywheel in the small motor can generate the 500 Watt output for hours at a time into a regulated circuit/charger/inverter, etc. without the flywheel slowing down they will have something.  But as my last name is "Thomas", I'm a show me.  I see some beautiful work INTO a neat pulse form of motor but I have yet to see confirmed OUTPUT from the same device.  Am I missing that mechanical switch as seen on the plastic motor vs. the BIG motor? 

Someone on the list said to Google "Dennis Danzik" !  I just did....Do you like to read large PDF files???  Make your own opinions.

RespectfullyBen Thomas, K4ZEP, Worlds Smallest Lab

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #78 on: May 10, 2019, 11:55:05 PM »
We really need someone with good technical measurement knowledge to go there and have a personal lookand see what the real output under load is...
Is no one living near the shooting range installation or near Scottsdale ?
Please let me know.Maybe we can arrange a visit via Karl Walsh for you..
Regards, Stefan.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #79 on: May 11, 2019, 04:40:44 PM »
In less than 3 days they will have a LIVE Demo 24/7 via Livestreaming here:

http://earthenginelive.com/
They write:

The World’s First Magnetic Propulsion Engine was developed by Inductance Energy Corporation and will be streaming LIVE 24/7!

 “Crystal” is a fully transparent laboratory scale model of the Inductance Energy Earth Engine. Crystal is driven by Magnetic Propulsion, which is the science of moving a mass (such as a flywheel, vehicle, elevator) in a rotator reciprocating, linear, or vertical direction soley by means of controlling permanent, imbalanced magnetic radiation (field). Using the repulsion (opposing force) as a fuel source, the Inductance Energy Earth Engine, driven by magnetic propulsion pushes large, heavy flywheels with zero-contact. Inductance Energy zero-contact drive system allows the Earth Engine to operate variable speed transmissions, drive shafts, reducers, and other devices without the requirement of gears, sprockets, chains, or belts. This provides a near friction-less connection between power source and the final selected device, such as a pump, compressor, or generator.

 Inductance Energy is proud to display Crystal to the world on this Live Streaming broadcast here at EarthEngineLive.com.   If you are looking for more information about this world changing technology, visit us at ie.energy, or sign-up here to be added to our communication list.

conradelektro

  • Hero Member
  • *****
  • Posts: 1842
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #80 on: May 14, 2019, 07:32:06 PM »
I just checked at http://earthenginelive.com/ , the wondrous thing is not online. What is going on?

I was expecting some KW output? What a shame or scam!

Greetings, Conrad

Thaelin

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1093
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #81 on: May 14, 2019, 08:09:47 PM »
I even cracked a beer to celebrate and and and ..... nothing to see here folks, move on.


Now its saying will be launching soon. Just modified.   Good Grief Charley Brown.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #82 on: May 15, 2019, 02:04:14 PM »
It seems they are just redesigning their Website right now...
Now this new explainer video is online embeded into one new page and at Youtube it is here:


https://www.youtube.com/watch?v=wS92Mm4A8a0

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #83 on: May 15, 2019, 02:25:46 PM »
Well now they show at least their inserted generator and now one knows, how they want to extract the electrical power...
But unfortunately they show it only idling with a real electrical load connected...
Hopefully driving a real load will be shown in the upcoming Live video ?

Also here is a new picture of a newer ? model at their new contact page:

https://ie.energy/contact/
Regards, Stefan.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #84 on: May 15, 2019, 02:32:11 PM »
Maybe someone knows these inverters and devices that hang on the wall at 00:15 minutes in the video andcan tell us, what kind of inverters these are and how much power they are capable to convert ?
Have a look here:

https://youtu.be/wS92Mm4A8a0?t=15

You can also watch in in FullHD, so the picture is pretty clearto recognize these devices...
Many thanks in advance.
Regards, Stefan.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #85 on: May 15, 2019, 02:41:45 PM »
It seems they are using one of these invertes here from Schneider Electric:

https://solar.schneider-electric.com/product/conext-xw-pro-na-solar-hybrid-inverter/



k4zep

  • Hero Member
  • *****
  • Posts: 650
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #86 on: May 15, 2019, 02:59:57 PM »
John Bedini must be rolling over in his grave laughing. No disrespect! to John.
Where are the numbers?  Power in power out. Long term load vs. speed of those damn flywheels!The big flywheels are just accumulators  of the input pulses!  Unless those pulses are unique and we don't understand them, there is no way that it is "Free" energy.  When  large
load is applied, watch the speed/RPM's of wheel and rate of pulses (power input) to the wheel.  Measurementshere are so critical.  Load must be in the Kw range to show up in system within a reasonable time. 
Power the system/flywheels and the load from the generatorand see what happens. One inverter and one load should do it. Take it off the grid.What webs we weave!



 



hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #87 on: May 15, 2019, 04:35:30 PM »
Here is a datasheet of the Schneider Electric Inverter:

https://41j5tc3akbrn3uezx5av0jj1bgm-wpengine.netdna-ssl.com/wp-content/uploads/2019/01/DS20190125-Conext-XW-Pro.pdf


So contineous output power is about 6 KWatts.
Hopefully they will show it sometimes with such a load...

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #88 on: May 15, 2019, 07:00:46 PM »
Also one can see around minute 1:00 in the video, that the Red and Black Generator output cablesgo via the ceiling steel T-Beam to the Schneider Electric inverter, so it seems they put the output of the generator to theInverter to convert it to normal AC power.
So I hope we will soon see some electrical loads, that are connected there via the inverter...

Regards, Stefan.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: IEC Earth Engine First Magnet motor installed in Las Vegas
« Reply #89 on: May 15, 2019, 07:20:19 PM »
Karl Welsh just posted, that the Live Demo will start today at Noon PST Timezone, so in about 2 hours from now...

So get your adult beverages out and enjoy the show.. lol...
Regards, Stefan.