AlienGrey:
My interests are focused on any member who is writing and acting on several masks.
The data of the past 8 years is so abundant that I am worried about what to start with ....
============
Akula says that the device of Ruslan that appears to produce 4kW at output should have minimum 12kW circulating in Russlan's device to enable processing 4kw atr output.
And Akula critics is pointing at Russlan device as unreal ( no presence of significantly thick wires utilized by Ruslan.)
Quote
Akula :Thin wires must get damaged.
And by that Akulas conclusion is that Russlan device can not work at that load level.
I do not agree with this statement of Akula .- in the typical aerial power distribution we are dealing with High voltages
The higher is the voltage the lower is the current flowing in the wire.
That saved money on lowered cost of power transmission cabling.
So for example:
power line in your area carries megawatts, and wires are very thin. ( vyt at 12V DC of your Battery car charger you have significantly thicker wires.
The eqation from Ohms Law Power(W)= Voltage potential (V) x Current( A)
By that with the same power distribution requirement to the load , the wire can be of the size of your single hair flex if the voltage is significantly high.
If on the top of it you increase frequency of that AC waveform
than , the higher the frequency, the thinner the wire is required due to the skin effect.
Akula says that Ruslan is - not a fake ... but he also says that Ruslan device can not work at this level of power.
So it is like he does not deny that Russlan device is real but he says that it can not work supporting his statement with
"to thin wires"
For me it is typical French comedy:
-"Vasily, do you see what is written on the sheet of paper in front of your nose?
-Yes. it says on it the word 'impossible' [/size]
-So now, Bob .............. please prove to me that it is impossible?
-OK Prove it to you ........ I see what I see, but it's impossible to see it
-Vasily please open your eyes ... thank you ........... and now you see it?
- Yes I see it but it is clear that it can not be seen ... wait..... yes[/size] ... Well .It clearly says to me, "impossible."
-Okay, I understand it now. You Vasily actually are saying :that this what is possible for Ruslan impossible for you ....
-Yes somehow something like that
Wesley's comment :I can say that Akula clever talker .............
Akula without problems- answered the question of Ilia Tesla with another question >>
so now, Akula listens to answers rather than just trying answer any questions .--that is a typical Russian way of avoid answers.
Akula has repeatedly indicated its collaboration ( association)with number of laboratories and scientific teams conforming and analyzing his device
Any doubt or questions is turn down by Akula
Quote
" I know it better , and you do not. Labs that have high grade lab equipment you guys have no access to have already check it out".
But Akula he never mentioned, the name of any laboratory and any scientist
Quote
Wesley to Akula:
Akula where are the names ... at least one of them?
Roman Karnouhov I support you, I was took my effort , to believe that your product looks real.
If you do not want any more doubt of any other people is is the best for you to prove it to me .. If I conform that your device is real - the world is more likely to give you a confirmation as well.
the right diagram is just crystal radio.
There is no free lunch.
Transmitter of AM radio station sends the power received by the receiver from diagram 2.
the only difference is that this Free Energy is free for you as someone have had already paid for it.
Good idea. Let's say each of us would be in the size of an ant, then a few milliamps provided by a crystal radio could power a complete ant household. So what's the problem? We have just to make a bigger crystal radio, so it fits our size.
Wow ~ ^,.^
blueplanet:
Meta:
Quote
If you do not acknowledge me giving you information or criticizing the info I give with so flippant an attitude as you have shown, you may very well be intellectually dishonest that I don't want to give you anything, for I know something is very wrong with your approach and you may be using all that I present but only secretly, seeing you are so chummy with well funded clandestine organizations under nondisclosure, and I have no need of that either.
Either way, you need further education about harmonics, world grids, mayan bi symmetry, tzolkine,
I ching, esoterics, scalar, tesla howitzers, unified field, longitudinal energy, radiant energy or overunity, no matter how much equipment you have nor how many people you seminar with.
I do not really know what should I answer to this.
I by myself.
I'm not interested with Free Energy.
I'm interested deeply with mechanism that is behind devices of Free Energy.
Overunity (OU) does not exist. However term is no longer used as OU but as OU describing energy transfer that to the naked eye looks like OU.
In reality it is unknown to that very eye, at that very moment what this energy come from.
I Wesley use "OU" word to describe in general form of expression subjects related to that Eye effect of energy consumption manifestation when there is no battery not power supply connected to the device.
Free Energy exists. It is energy that is free of tax. such as solar energy, water flow energy and so on.
Device of Tariel Kapanadze was legitimate and works to the naked eye without battery or any other source of energy .
In reality laws of thermodynamics specify very much that even that device must work of the energy that is consuming.
So for me it is important to find what this energy comes from .
Lithuania Experiment with Arunas is legitimate event.
However mechanism of energy extraction is based on different phenomena that Tariel Kapanadze device.
Will that assumption change?
Possibly yes.
We have changed our models so many times and world goes on.
I'm interested deeply with mechanism that is behind devices of Free Energy.
People who are not interested in free generators come to this cafe and people who are interested in free generators are higher-level jokes than intimidating trolls ......
I pray that you are not slave to Wesley.
Then you have to explain how all these atoms that are compressed together to form objects have their electrons all spinning around with orbitals touching other orbitals and we never see objects just fall apart because of electrons crashing into each other. How can billions and zillions and quintillions of electrons spin around without ramming into each other? So you see the electron flow model is just chock full of holes and areas of reflection that really ask that we all look the other way with regard to these questions. "That's the way it is" is a major basis for understanding electricity in our present days.
===================
https://2.bp.blogspot.com/-GkN3WYHkFqQ/XDZf23Jui3I/AAAAAAAAAxI/kPG1Ms894NUy79gFb-OpHkDfvNgz-nFbwCKgBGAs/s1600/%25ED%2598%25B886.gif The slowest lightning speed is about 400 km.
wattsup:
@all
OK you guys. Let me just put in an new angle.
If I talk about potential ways to make a device work towards OU, I am not saying at the same time that I believe TK is legitimate. I will never say anything good about anyone flaunting an OU device or a supposed OU device in our faces and in the worlds face while the world is in such dire straights. So whatever I say here from now on is to advance OU, and not the likes of TK or any other Show-and-don't -teller.
So let me open up an idea THAT MAY BE RELEVANT TO THE 2004 TK device. But first you need some background.
As far as all my bench works go with both DC and AC pulsing, the main object of all these techniques is to create a strong polarity change in one coil medium that can impart those changes to a second coil medium with or without a core. As far as what I see on the bench and what is taught in our schools about AC, I know now that we are totally off the mark. AC cannot be a true alternating current if it is to also follow the "electron flow" model of electricity. You cannot have both because of one dead give-away. The AC neutral is always grounded hence it can NEVER be hot. The hot side is HOT, OK, but the neutral is exactly that NEUTRAL. There is never any hot signal leaving from the neutral side to enter the coil(s). Anyone can try and dispute this but if you are honest in your unbiased observations, you will also see this to be true.
DC and AC are really not the same thing at all. AC is not a dual DC even if it is full bridge rectified, just try both methods and try to produce the same sinewaves and you will see there is no way possible (except at high frequencies).
Let's take DC first. I need someone to prove to me that a car battery is 12 volts in that the negative terminal is at zero volts and the positive terminal is at 12 volts as we see today the car battery voltage. So prove to me that the battery is truly 0 and 12 volts and not -6 to +6 volts that would both show a 12 volt potential difference. Prove to me with your volt meter or your scope. If using the scope set it to both DC then AC coupling and convince me which is the valid scope waveform. Why is the DC reading supposed to be considered the valid method?
DC pulse is a simple peak, peak, peak where when the pulse is off, there is nothing to hold it from oscillating. This is useful in some ways but counter productive in other ways because the copper atoms are left to themselves to realign before the next pulse. Nothing can rebias the copper wire before the next pulse.
Now let's look a AC. Explain to me how AC can alternate while there is a ground wire on the neutral side. In the common AC discussion the hot AC signal alternates from the HOT side to the Neutral side and back and forth. So tell me how a hot wire can exist on the same line that is grounded. In general experienced EEers will not even want to take on such a discussion because if their brains are screwed on the same way as anyone else, they will quickly realize this to be the case.
AC pulse is however a very strong gradual rise or better worded "controlled rise" and "controlled fall" where the copper atoms are always under a rise or fall stress leaving no moment for the copper atoms to rebias by any other means. AC is a perpetual controlled peak and rebias but there is never any "electron flow" hence there is not any need for electrons since their reason for existing is to "flow" in a wire. If you remove their reason for existing in this effect, you just killed the electron flow model in one swoop which should have been evident to everyone with a brain way back when Tesla first invented AC. Please try to counter this statement as I would be very curious to know. hahaha
OK, AC then is what? If electrons do not flow, what the hell is going on in our wires? Well to answer this question you have to look at the evidence in front of us. We know the copper wire is made up of copper (and other noble metals) ions or atoms. We are told that all atoms have "electrons spinning" around a center nucleus but we also know that the science behind explaining where these mysterious electrons get their energy to spin around a nucleus is not explained to any fluent degree. Also, those same electrons, since they are on the outer shell of the nucleus, are the only thing humans have every touched so when you grab any object, you are grabbing a bunch of electrons with "floating" nuclei in them. Then you have to explain how all these atoms that are compressed together to form objects have their electrons all spinning around with orbitals touching other orbitals and we never see objects just fall apart because of electrons crashing into each other. How can billions and zillions and quintillions of electrons spin around without ramming into each other? So you see the electron flow model is just chock full of holes and areas of reflection that really ask that we all look the other way with regard to these questions. "That's the way it is" is a major basis for understanding electricity in our present days.
The worst part of all this is that under this new Spin Conveyance model I will be publishing soon, all of these effects can be PERFECTLY explained while preserving the same method we use today to measure our devices. Only the construct will change. But in a nutshell, if AC is not "electron flow", because all the evidence proves the contrary, then what is it. What's left if the outer atoms shell is to be considered nothing more then a wide variety of bonding mediums, the only thing that's left is the nucleus itself. This is where we have been robbed of the intellectual ability to consider the nucleus as the main causal medium of electric signal throughput. So the answer from there is so simple. All the nuclei have to do is respond directly to outer stimuli or direct applied stimuli. If the nucleus was able to perform what I call the 6S's as being Stay, Show, Sway, Swing, Spin and Shoot and by doing so it can convey these same "physical nucleic motions" to their neighboring atoms, then we have the perfect platform to explain all our effects on our benches which I call Spin Conveyance.
Stay - Leave a coil alone and the nuclei will simply Stay or hold their Latent position. Some will turn and point down to the center of the Earth at their latent position.
Show - Bring a strong magnet and hold it in one place near the coil and the nuclei will show one quick waveform blip then fall to zero hence the blip is the nuclei turning from the latent position to now Show position that points to the magnet source.
Sway - When a magnet wheel passes by a coil, the nuclei will leave the latent position to point to the oncoming magnet, follow it passing in front of it and point to it leaving the coil so its a motion of left/right left/right. This shows movement from the latent position, going left, passing through the latent position again, then going right. So Sway occurs when the nuclei goes from any two left/right positions by passing though the latent position. THIS IS ALSO AC as a GRADUAL back and forth Swaying of the nuclei.
Swing - From the latent position the nuclei goes either left or right then comes back to the latent position. This is DC and the waveform of DC pulses we see shows exactly that. Quick rise then a tapering off and even a negative rebound.
Spin - When you can Swing an atoms nuclei fast enough for it to pass the peak top point and continue in the same direction with perfectly timed pulses, you reach nucleic Spin. Since not all atoms have the physically ideal inter atomic placement inside the copper wire matrix, not all copper atoms can spin. hence those that do are few and we see this with good voltage but crappy amperage.
Shoot - Hit the two terminals of a car battery together and what happens. Sparks start to fly out of the wires. That's Shoot which is not something we run after every day.
When I say Spin, it can also be any of the six above attributes.
The 6S's do more then what is described in this simplified rendition but it is enough to get the idea that if our atomic nuclei was considered to be smarter then we think them to be today, then we just found all the reasons for all our effects, including action at a distance where the nuclei have the ability to sense energy sources from a distance hence not requiring any magical fields to impart their fingers on a wire to "do something magical" to make electron flow in a conductor.
We can then understand that voltage is a function of the degree of spin from the latent position and amperage is simply the number of copper atoms involved in the wire that are spinning. So for the first time ever, you have real physical reasons for our volts/amps effects. You no longer need to believe in these magical electrons and fields. Field collapse at pulse off becomes coil rebias when under DC. AC does not produce the field collapse while running because all it rises and falls are controlled.
AC Hot then becomes nucleic Sway where there is no need to have any electron flow since all that is happening in the wire is the nuclei themselves are Swaying to the applied AC hot. This explains perfectly how AC works in our wires and also explains that only one hot wire is all you really need to do this while the neutral wire is there as an anchoring post. Again very simplified for this post.
So DC is quick rise in the same way and this is why DC is additive. Try and put two AC lines together that are out of phase as all you get is a major havoc since the nuclei are turning left when another is turning right and this creates a major collision inside the wires.
But AC is so great because it controls all the angular movements of the nuclei while DC just spits up and then releases as an uncontrolled rise and rebias making it hard to concentrate a targeted effect.
Of course again the above is a simplified rendition just to give you guys some background to what's coming next.
Sooooooooooooooooooooooo. Is it possible to marry the best attributes of both AC and DC into one method? DC would provide a constant "additive" upswing while AC would provide the controlled rise to keep all of the copper atoms in action. DC is a hit once a hope method while AC is a totally controlled method. But AC can only be applied to a single coil on a transformer where the coil undergoes a controlled rise and fall hence there is no room to play around like with DC. But in both cases, one cannot produce anything analog to the rotation of a magnetic rotor inside of a stator. This we have been unable to produce since a rotor is a real physical movement that is making the nuclei of each copper atom to physically sway, while AC in a primary has no movement and the sway is always applied at the same vectorals hence the copper atoms cannot follow a physical movement. Same problem applies to DC pulsing as well. In all primary to core to secondary relations, everything has to be accomplished while all are stationary, and this is costing us dearly in our output performance.
So here is the question. hahahaha Always a question hey.
Is it possible to take one AC line and pass it through a type of full bridge rectifier where you can then output TWO DISTINCT outputs that are 180 degrees out of phase? If this is possible, then you can make transformers with two primaries, one left primary, center secondary, one right primary where each primary now gets its own AC peak pulsed that is 180 degrees out of phase and the secondary will now have the impulses coming from two changing vectors. If this can work and increase the intensity of the Sway of copper nuclei, we just made a new toy for working towards OU devices.
Do I need to expand further. Guys in the know will read between the lines. hehehe
wattsup
==============
Someone insists on the US Army and the strange debate rotates the brain of innocent lambs.
Zeitmaschine:
March 22, 2016, 11:20:25 AM »
Quote from: pix on March 21, 2016, 10:42:31 PM
By who???
Could you be more specific?
First, by people who fall eagerly for Kapanadze's eye candys again and again.
Second, by people who write up to four posts in a consecutive row (although this forum has an edit function) in order to stretch the length of this thread unnecessarily and hence make it more difficult to find anything written just a few days ago.
So as it seems I have to quote myself form the long ago buried PAGE 977:
He makes the same mistake as Kapanadze did with his phony spark setup: If the energy output consumed by the lamps is ever in relation to the spark then the lamps have to flicker because the spark flickers. If the lamps are glowing steady then the current that goes through the lamps cannot be related to the spark in any way. Simple as that.
And this still means there is no spark gap that contributes anything to the energy output of the Kapanadze device, especially a spark gap that does not fire at all.
Actually I'm more and more attracted by the idea to open a new thread about a summarization what we know (for sure) regarding the Kapanadze and Stepanov devices, so there is no need to go in circles time and time again.
Quote from: pix on March 21, 2016, 10:51:41 PM
Meta,
Please stop with this negentropy 4th dimension stuff.
Why should he? If someone here comes too close to Kapanadze's principle of work then why not bury it quickly by means of the 4th dimension?