Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1147311 times)

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1815 on: January 29, 2020, 03:55:44 PM »
Probably "Kirchhoffs laws" are giving answer ,beside circuits also thermal radiation related

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1816 on: January 29, 2020, 04:37:29 PM »
The answer is that the energy is gone, and when perfectly destructive.

I dont understand why maxwell would say the energy si zero is there is heat energy.

I will have to review it, did you read above?

Yes heat, probably, I guess, that would be the immediate answer from the internet, I will stop my searches.

Maxwell was disturbed by this, I dont think he would be disturbed if it was All heat.
What are you like? you trust the word of a polytical polatician b (sad) ;D ;D What is heat? hmm? it's a vibration!  the Atom is the Bullshiter!
go back to school that man, start here > https://www.youtube.com/results?search_query=jim+al-khalili

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1817 on: January 30, 2020, 07:49:06 AM »
https://www.youtube.com/watch?v=anvb_PXG1YA&feature=emb_title
https://www.youtube.com/watch?v=yKjgMmZcFA0

2014, demonstration of a resonant transducer. Westley, this guy must be a Russian-speaking provocateur again.

It probably uses a similar scheme for swinging the contour: http://pikucha.ru/wp-content/uploads/2016/07/Jelektricheskaja-shema-indukcionnogo-nagrevatelja.jpg

The guy tells how he removes, and calculates the resonance of the secondary circuit and demonstrates the work on the load. Unfortunately, it does not demonstrate the consumption of the reference resonant circuit.

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1818 on: February 01, 2020, 04:37:55 PM »
Wesley, from what American device is this board? Presumably a device of the 60s.
It was abducted by me a very long time. But the device is still older. :)

Toolofcortex

  • Hero Member
  • *****
  • Posts: 577
« Last Edit: March 05, 2020, 12:36:26 AM by stivep »

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1820 on: February 02, 2020, 08:56:18 AM »
https://www.cryptomuseum.com/df/1100ar/index.htm
Thanks for the interesting site. But it seems to me there were digital indicators. And the performance is desktop, not in the rack.Although it seems that it was in a past life ...

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1821 on: February 02, 2020, 11:56:10 AM »
  Well I do not know what is going on with this device.....it is now running on a minimum... 2 induction coils, 1/2 ferrite core, 1 diode , 2 capacitors and the OPA541,plus heavy grounds...and I have the same output with 1/2 the core missing...It now starts with momentarily touching the dipole ground to the 1/2 core,15 turn winding.....The output of the core is now one wire which goes through a .3 micro-farad capacitor which itself runs cold.The single diode gets warm but can be held in the fingers, yet tries to light 370watts of bulb power.The core also does not appear to be warming up....The OPA541 is running 44.8 volts @ .8 amp @ 85 kHz now and must be somehow powering those bulbs through that small .3uF capacitor---I can feel the heat radiating from the orange filaments.I do have a heavy ground connected to the diode and the OPA541...If the induction coils are moved too far away,the system shuts down and will not restart until the dipole ground is again touched to the core winding.The ground can stay attached or removed--makes no difference.
It does appear though that both capacitors play a significant role in the resonant core.I know the coils do.I adjusted the capacitors,a month ago, for maximum output, and minimum capacitance for the 14 watt bulb I was using.
    Now here, I removed the second half of the core while it was running, I held the second half of the core to the first half and felt the buzzing from them as they tried to connect.I then decided to try just the one half (15 turn half) and it lit the bulbs,I then removed the ground side and the bulbs stayed lit. So I am now down to one wire trying to light 370 watts. Bulbs colour and brightness have not seemed to have changed as when I had all that other attached,but the frequency of the system has went from 65kHz to about 80 kHz.OPA541 can be ran without its fan for cooling but appears to warm up over time------------- ..Note this is an ongoing project and I can only tell you what I have discovered....Schematic is correct as I believe it to be.Nothing hidden.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1822 on: February 03, 2020, 11:30:12 PM »
I posted a bit too soon it seems because my system no longer uses the small caps,nor does it need a momentary contact--it starts as always by adjusting the bi-fi-coil,of which 1 is only required but 2 gives it a boost.And the bi-fi- hookup lines have been reduced only because it made no difference in output that I notice,so I left those off too.It is much more streamlined for a given output.----The ground line---that has a big influence I now notice...The system will not run with a flat copper cable line to the copper water pipes,I tried...It uses a 40 ft. line, of 2/0 silver coated,multi strand cable ,clamped  to a 3 foot copper pipe hammered into the ground...System appears to run the same without all the extra baggage.System resonance has dropped to about 54 kHz from 65 kHz.Still uses a single diode.System will not start nor run without the 1/2 core attached with its dangling wire.It will run with either the 15 or 150 (cadaceous) coil/core attached,despite the wire to nowhere.The core gives out a stronger field with a larger load..... RWG Research on You-Tube makes similar induction coils if your curious where to find them.Im sure he still makes them.

Ansis

  • Full Member
  • ***
  • Posts: 112
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1823 on: February 04, 2020, 05:14:28 PM »
This is interesting!
https://youtu.be/jHK7kKsVVw0

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1824 on: February 05, 2020, 03:44:39 AM »
Yes it is interesting.
Wesley

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1825 on: February 08, 2020, 03:13:07 AM »
Ok..looks like a fail...it lights the bulb without the core @ 35kHz. I tried 3 different core winding combinations and they all responded about the same,which made me wonder.So I removed the core and used a straight hookup ---Im sure I tried this earlier and it did not work.This time the bulb lights...Back to the drawing board !!

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1826 on: February 14, 2020, 02:41:22 AM »
Quote of Mark comment:

Quote
All of the answers for you is provided by guy name Wesley in his 3 videos
https://www.youtube.com/watch?v=XOTLfnMOSqQ
https://www.youtube.com/watch?v=zE4GjB1cWLQ
https://www.youtube.com/watch?v=yNs2wc8nRJw&t=277s
his youtube is  -   stivep1
For more detailed technical aspects go to 
Start  up or down from here
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg533486/#msg533486

Zenneck wave is transferred from Top capacitor of Tesla air Transformer, at Brewster angle  to Earth/Air interface.
That wave doesn't  propagate in FAR Field.
We may describe it as :
 Wave from group of Surface Waves
-type Zenneck Wave
mode: TM mode ( Transverse Magnetic. )

And that wave in Fresnel zone between Near Field and Far Field at angle  around ~67 degrees  is trapped in the interface.
The receiver looks exactly the same as transmitter.
Receiver can be placed at any point of the earth or ocean.
--------------------------------------------------------------------------------
 Viziv  with  PhD J.Corum and K Corum ( brothers)  and involvement of Chevron  plays with Tx-Rx energy transfer.
But Schumann Waveguide by its own energy fluctuation inside of that Waveguide  triggered by lightnings  has two boundaries
-Earth
-Ionosphere

The Earth is accessible to us.
If at Brewster angle  energy is deposited   to that boundary as  Zenneck Wave at TM mode ,- this energy is trapped in the INTERFACE earth/air.
For simplicity think of it as 2D space around the earth.
Than this energy can be  "extracted" - (received)  by a Tesla coil with Top Capacitor   tuned to  this particular frequency.
 more you will find in links attached to this comment . 

Dear Mark you absolutely correct
thank you

Wesley

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1827 on: February 19, 2020, 11:25:55 PM »
.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1828 on: February 20, 2020, 09:37:51 PM »
 I found a "recent"  (2013) patent that uses an interesting device for either testing or for use..It is the device,that I find interesting.The patent itself describes a process
for making GHz ferrite.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1829 on: February 21, 2020, 09:01:41 PM »
http://www.hatz.hr/hrv/skupovi/tesla_unesco_proceedings.pdf
the only  interesting  was page 53
and cavity filters
Wesley