Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1146345 times)

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1740 on: January 11, 2020, 06:17:45 PM »
Without getting too involved here would not harmonics fit into this Categorie of the drawn-out elastic band.

Raymondo

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1741 on: January 11, 2020, 06:25:01 PM »
You welcomed with any  findings  thank you for that.However  you  didn't respond to my questions from above. Can you?

Мы приветствyeм вас с любыми выводами, спасибо вам за это.
Однако вы не ответили на мои вопросы сверху.
Ты можешь....прежде чем вы углубитесь в то,нa чем вы пытаетесь сосредоточить наше вимание??
Простой вопрос :
от  куда энергии берется и как
от  куда Энергия берется до того,и как она попадет на устройство.
Объяснить весь процесс

Wesley

DELAMORTO replied that it was an oscillatory circuit. They call it REKTIVKA, I think you know what it is.
The problem is that no one can get that power out of this circuit. It is only in calculations and measurements before loading. When you do load, the resonance falls and the circuit begins to operate normally.
Until the phases overlap, it looks like kW, that's why some see power here.

DELAMORTO

  • Newbie
  • *
  • Posts: 9
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1742 on: January 11, 2020, 06:36:28 PM »
r2fpl, да именно так, как сказал Капанадзе- никто не мог заставить его работать.
Весли, а по вашему что потребляет 60-100ват  в видео "Банка" ? Это накачка колебательного контура!

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1743 on: January 12, 2020, 09:49:25 AM »
https://youtu.be/-PMMK4KHXYU
Have you gotten that Los Alamos radiation meter? Probably Opengheimer worked with this yet. :)
I also want this. ;)

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1744 on: January 12, 2020, 11:05:02 AM »
  I now have a 250 watt, 2.2a, 4.1 ohm IR bulb running on my system.Bad thing is, brightness is only about 1/10 of what the actual output would be if the D.C. input was applied straight to the bulb. Power input is now 48v @ .85a---I received the OPA 549,it works fine but has a 30v limit,so Im using the OPA541 with its 40v limit pushed to 48v.Overall the  core still runs cool but the heat sink on the OPA is getting rather warm.I had to re-adjust for the 250 watt,now the IF is down to about 95 kHz from the previous 190 kHz,and the output at the bulb is now 45kHz from its previous 100kHz.There is one small area where the antennae adjusts,about 1 sq.in, where the bulb lights the brightess. The AM radio still has a clean signal with no static,but no stations can now be heard so I assume its over-riding the 455kHz IF.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1745 on: January 12, 2020, 11:45:37 AM »
 Let me add this unusual fact about this---this 250 watt has  the same "color" or " brightness" as the 4watt I tried,the 20 watt, and the 125 watt,....It all appears as if the voltage is constant in all of these,but the amperage is what varies with the load, (that is just an observation) .....Why I cannot fully light a 4 watt / 125 volt bulb puzzles me when I can light, just as easily, this 250 watt bulb....But Im on the case...I have 45 KHz to go.
   This is the first time,as I recall , Ive seen such a frequency drop in my IF stage.Did not appear to drop before,but things changed when I tried the OPA549 and then switched back....I have noticed this drop  in earlier trials with this split core setup,but I was using Neon bulbs as the load in which case the voltage output kept going up,I had 1700v before the 7 watt stereo amp driver gave up (I think the 1700 volts back-flashed)..It was never the same after.
   Im not trying to "ramble", just letting anyone interested  know the data I have accumulated.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1746 on: January 13, 2020, 07:02:13 AM »
I now have 375w hooked up ---(again, only 10% output / input ratio)---I have included some measurements taken direct from the antennaes ( L-coils ).
    Also ,the ground line I use is about 40 feet of what appears as silver coated, multi-strand, 2/0 wire.It was a little expensive but not the worst in price.
   The system did not drop in frequency adding the extra 125 watt,so I have not reached that limit yet I guess.I also found that with a smaller load the core output can be run off just one leg of the 150 turn cad. coil...Also, the IF stage can be eliminated too but a small load and careful tuning would be needed.
   I hooked up a 120v / 250 watt, 67 ohm heating element and it reached 125 deg F inside 15 minutes with an input of 48volts / .28amp..It will draw twice more amps but will not be as efficient. I can tell by the output on the scope when it resonates or does not. I guess the OPA541 absorbs this extra current, because I cannot find any where else it goes.

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1747 on: January 13, 2020, 10:07:35 AM »
What are these plates? Outlined in color.

endlessoceans

  • Full Member
  • ***
  • Posts: 137
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1748 on: January 15, 2020, 02:36:08 AM »
This is a good example of an excess energy machine.  The process of which is defined clearly and has been replicated and exhibited in other patents and applications.

Clear explanation of known principles

No hogwash pseudoscience such as fancy waves and surface energy that Wesley goes no about

https://patents.google.com/patent/US20160049839A1/en?assignee=Arion+Technologia+Brasil-Gestao+De+Ativos+S%2fA


r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1750 on: January 15, 2020, 09:56:04 AM »
https://patents.google.com/patent/US20160049839A1/en?assignee=Arion+Technologia+Brasil-Gestao+De+Ativos+S%2fA#legalEvents

Wesley

This guy only makes dummies. Others also confirm this.
I talked to him and asked why he did it. He replied that he had a purpose in what he was doing.
Just read the patent and then read how much MION reaches the ground to understand that the guy does not know what he is writing about.
I found in his movie the moment the device turns off before turning off. It looks like someone next to him turns the device off and on or is controlled.

https://www.youtube.com/watch?v=G7oYqjiiQJg

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1751 on: January 15, 2020, 10:06:51 AM »
https://www.youtube.com/watch?v=D-mVLHf5ws4    =====   https://www.youtube.com/watch?v=E5PtzEVMe7k

It is enough to understand that it is a transmission of energy. Wesley showed the same thing a year ago with a light bulb. Is this an FE? NO !


groot

  • Newbie
  • *
  • Posts: 34
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1752 on: January 15, 2020, 01:41:44 PM »
In the light of modern scientific view we all should know that energy can not be created or destroyed  so all devices must transmit and/or convert energy from one state to another , from one place to another.

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1753 on: January 15, 2020, 01:58:14 PM »
Quote
My friend Māris Slanārs, will give you 1000$ if you will make perpetum mobile device which lite up LED diode which will never ends!
What about this?

https://www.youtube.com/watch?v=5ho0_obiakM

groot

  • Newbie
  • *
  • Posts: 34
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1754 on: January 15, 2020, 02:02:51 PM »
Now keeping that in mind how LC circuit can increase energy?
Common knowledge is that resonant tuned LC circuit multiply/increase voltage or amperage and its not at the cost of other like electrical transformer.
So what transmitts energy in to this circuit?
Thx
P.S.
If you object this point of view please direct me to publications that states this is not happening.