Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1147095 times)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1350 on: April 03, 2019, 10:34:05 PM »
did you  wind coils  of magnetostructive rod  -(points  1 to 5)
for each given material permeability is given.
http://www.free-energy-info.com/Smith.pdf
go to right page.

Quote
Magnetostriction (cf. electrostriction) is a property of ferromagnetic materials
that causes them to change their shape or dimensions during the process of magnetization.
The variation of materials' magnetization due to the applied magnetic field changes the
magnetostrictive strain until reaching its saturation value, λ.
https://en.wikipedia.org/wiki/Magnetostriction

Wesley
« Last Edit: April 04, 2019, 03:19:00 AM by stivep »

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1351 on: April 03, 2019, 11:17:55 PM »
We  are living in a "design"- world : https://newatlas.com/gold-melt-room-temperature/57327/
Fullerton worked with 200.000 Ampere bursts to change " conventional structure".
             sentire( to sense), fuehlen( to feel) power density :

https://contest.techbriefs.com/2016/entries/sustainable-technologies/6390

2 shoeboxes total ( battery + controler) , but net the generator only 1 shoebox-dimension for xxxxxx KW output.

One cube, 1 cm x 1 cm x 1 cm : 2 KW output, by related cycle process frequency.

It is time to make this " generator" 3d-printable.


1 cm x 1 cm x 1 cm : 2 KW x 24hpeak= 48 KWhp per day

human individual body cooling / heating energy need. : 12 W
MDI Dome,112 sqm : 2400 W heat peak by 400 W electric heat pump ( -20 °C ambient condition )
Electric multimotor-gear car 1 KWh/ 100 Km , 150 Kmpeak velocity( 130 Kmpeak street legality)
Electric intelligent household power need per day : 3 KWh ( /24 : 125 W )


kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1352 on: April 04, 2019, 09:47:09 AM »
There are only ferrite rods. :'(
But what is (positive dc input)?
 if there is no way for it. is a capacitor in the path? :)

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1353 on: April 04, 2019, 09:51:12 AM »
There are only ferrite rods. :'(
But what is (positive dc input)?
 if there is no way for it. is a capacitor in the path? :)
Can you, kolbacict, define -by eye - in " solar ink dots" the capacitor/condensator ?!  ;)
1 cm x 1 cm x 1 cm compact " solar ink dots" -cube output compared with 2 KW 1 ccm cube  !?
Goldbaum device : " coating" ! Material,physical emf effect !?
« Last Edit: April 04, 2019, 04:03:05 PM by lancaIV »

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1354 on: April 04, 2019, 06:17:24 PM »
this circled in red. if it were not there, a cascade with a common base would result.

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1355 on: April 04, 2019, 10:16:21 PM »
was made by me, it does not work like an oscillator. and can not work, the direct current is broken.
 ??? >:(
There are only ferrite rods. :'(
But what is (positive dc input)?
 if there is no way for it. is a capacitor in the path? :)
this circled in red. if it were not there, a cascade with a common base would result.

Hi kolbacict,
I have edited the schematic you uploaded, at least to make the circuit work as a kind of blocking oscillator. 
I agree that the original schematic cannot work: "the direct current (to the emitter) is broken" as you said.
If you attempt to build this modified schematic, and you are not getting any pulse at the output where it is indicated originally, flip the ends of either the feed back coil to the base or the main coil at the collector, ok? (i.e. only the wires of any one of the coils) 

For your information: 
--the positive DC input is the supply voltage input with respect to the ground (which is the negative polarity),
--try to use a variable power supply, starting from a few volts to as high as 12 or 15 V, to find the best operating point for the oscillator, this also depends on your transistor specifications--the indicated output is via a coupling capacitor from the collector of the transistor, use here a capacitor whose capacitive reactance is but a few Ohms at the pulse frequency

I do not know where you can get a "negative magnetorestrictive rod" though... and I do not think its high price (if true) is worth the trouble to purchase such.

Gyula

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1356 on: April 05, 2019, 01:12:14 AM »
gyulasun I do thank you very much  for your contribution
good work
======================================

I think application is a part of the problem:
https://fas.org/man/dod-101/navy/docs/es310/asw_sys/asw_sys.htm
Figure 17. Bi-static sonar.
Material must be as listed in green color.
the system acts as  mechanical transducer
look at link below and the lower picture marked as figure1 system Block diagram
https://www.ijert.org/research/sonar-fish-detection-and-measurement-system-with-pic16f873-IJERTV4IS060453.pdf

So the unfortunate was that  book http://www.free-energy-info.com/Smith.pdf
was trying to refer to something that was  wrongly  explained.
but the idea is quite fascinating.
If you compare Tx configuration  from the lower picture and Rx configuration, it looks like both  use transducer .
and Smith assumption is that process of receiving is just reverse action  .

Note: I should  make schematic more easy to understand
but let it stay this way for now.
All that is important is to make Base able to open  emitter/collector junction  at first.
Than you can chose what you want to send  between collector and emitter.
And for how long. There is no output in the schematic.
So you can exclude this part.
The amplification can be done from the same + impulse.
but if you want to have train  of impulses send than you can use terminal marked output as external impulse delivery.
Would that be as long as  saturation of the capacitor?
-or you want to  cut  power to Base before that.
Wesley
literature: https://www.youtube.com/watch?v=WaHD7665NeM
 
« Last Edit: April 05, 2019, 03:22:00 AM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1357 on: April 05, 2019, 03:03:16 AM »
 

Wesley
« Last Edit: March 09, 2023, 05:33:51 PM by stivep »

mkjekyll

  • Jr. Member
  • **
  • Posts: 56
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1358 on: April 05, 2019, 04:31:53 AM »
Wesley perhaps I am a bot off topic now but a very solid RF guy turned me onto this VNA, looks interesting have to find out more such as is tracking gen limited like in the Chinese box.

https://www.arraysolutions.com/antenna-analyzers%20/vna-uhf-dx

Looks as though the coupler is inside the unit similar to many antenna analyzers, I do not know the downside of this config.

I don't participate on these forums much but have watched presentations and I highly respect the stuff Tinselkoala presents, thank you for participating in Wesleys tech circus!

Mick

mkjekyll

  • Jr. Member
  • **
  • Posts: 56
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1359 on: April 05, 2019, 08:28:31 AM »
$1300 I think,  they have a single port unit for about $500.   The frequency response looks good but so did the Siglent until one gets to the lowside of the tracking gen which did not match lowside of the spectrum analyzer.  Not o mention the crazy software pricing.

Still looking for a you tube or video of performance.  Likely CPU-Ram related if code is not bloated DLL files that choke the puter.

The pci card unit you mentioned did not go low enough and the HP Vxi card unit that does go low enough

https://www.ebay.com/itm/HP-Agilent-89640A-VXI-Based-2-7-GHz-RF-Vector-Signal-Analyzer-PRICE-DROP/232488518625?hash=item36216543e1:g:PBkAAOSwo-RZuuSv

https://www.keysight.com/us/en/software/application-sw/89600-vsa-software.html#Bundles

 the software is very costly and may not have the scattering or smith charting.  I cant find the software free from Keysite except the 30day trial  Maybe I should sell the HP 89411 I got working and get the little computer based one, lower S/N ratio but more functionality.  Although that HP can go super low so may be worth hanging onto even without the S parameters.

Most of the cheap puter ones do not work below a few hundred MHz so I think the unit I posted is different in that it is based on a lower freq unit and uses freq multiplication for higher frequencies, this would explain the lower dynamic range on the higher frequencies.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1360 on: April 05, 2019, 02:26:12 PM »
It looks like the best deal you can make is buying old used VNA.
Other options:
Software from  Keysight / Agilent is crazy  expensive.

The toughest part is that  we  are dealing with HV.


https://youtu.be/YrRc-xieWjE?t=683
https://youtu.be/Mn8TLBsR3r0?t=501





Wesley
« Last Edit: March 09, 2023, 05:36:48 PM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1361 on: April 06, 2019, 02:29:15 AM »
I do not use any form of decoupler.
Coupling in measured circuit is critical to make it work.
Devices used to measure must not be in any way a part of this process.

Inverse square law is primary tool to  be able to take measurement   safely to equipment.
https://en.wikipedia.org/wiki/Inverse-square_law
When possible I  use decade  attenuator.

Short wire 1cm, inside N connector of Spectrum Analyzer not connected to anything
if  HV is involved.

Wesley

mkjekyll

  • Jr. Member
  • **
  • Posts: 56
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1362 on: April 06, 2019, 04:09:05 AM »
Wesley,
 
I meant to isolate the power side from ground and kill common mode noise on the supply side, not decouple the measurement side. 

Nice setup with the divider pads though.



kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1363 on: April 06, 2019, 10:55:36 AM »
but I can’t do anything. I wanted to get it. There is a strong desire.
But not yet. :'(

seychelles

  • Hero Member
  • *****
  • Posts: 991
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #1364 on: April 06, 2019, 11:32:59 AM »
stivep with all those sofiticated instruments what you have not figure out how
make a free energy machine..look just send me over an oscilloscope spectrum analyzer and a swr meter
and i will put you all on a platter the kapadnaze free energy machine..easy.