Wesley's Kapanadze and other FE discussion forum

[Void]

@ VOID, to prove that an air conditioner is an over unity machine is easy.. It can more
efficiently cool your room and heat up water simultaneously than just cooling your room..
That has to be proven, but from my little experience that is over unity..Not by this observation,
but by calculating the electrical power consume as per the work done.

Hi seychelles. It is not over unity. For example the electric circuitry and electric components in a heat
pump are not producing more energy than they are consuming (which would be over unity), the heat
pump is pumping heat from one place to another. If the total energy in the heat that is pumped
is greater than the input electrical energy being expended by the heat pump circuitry, then
that would be a COP > 1. Look up coefficient of performance (COP) if you want to learn more about it.
All the best...

[seychelles]

What i am saying is that if a person calculate the time it take to cool a
1liter condenser, of water and heat up a different 1 liter  evaporator of
 water simultaneously one will come to the conclusion that the electrical power consume
 in this process compare to work done  is cop >1..

[Ansis]

About heatpumps.
There is 1 Country which have Heatpumps with COP>10000 or more
It is Iceland.
Because they have Vulcanic heat for Free!
In Latvia where is cold in Winter, we are not so happy.
Peoples who make very deep drills in to the ground, get better results, but if they make cheep
setup, then COP≤1. I know many real stories...

[lancaIV]

About heatpumps.
There is 1 Country which have Heatpumps with COP>10000 or more
It is Iceland.
Because they have Vulcanic heat for Free!
In Latvia where is cold in Winter, we are not so happy.
Peoples who make very deep drills in to the ground, get better results, but if they make cheep
setup, then COP≤1. I know many real stories...

Searchmachine : Super Deep Fusion Drilling
Each place on earth can have this " Vulcano-deep whole"- dis-/advantage and explore potential

[lancaIV]

What i am saying is that if a person calculate the time it take to cool a
1liter condenser, of water and heat up a different 1 liter  evaporator of
 water simultaneously one will come to the conclusion that the electrical power consume
 in this process compare to work done  is cop >1..

https://www.google.com/search?q=hot+cold+thermal+generator&client=firefox-b&oq=hot+cold+thermal+generator&gs_l=mobile-heirloom-serp.3...21730.26639.0.27274.9.9.0.0.0.0.225.1382.1j7j1.9.0....0...1c..34.mobile-heirloom-serp..2.7.1058.SjivexS_WCA
A very cold side for free ( Ant-/Arctic )or a very hot side for free ( Solar concentrating Tower ) ?
 Or a cold/colder/coldest cascade ( - 180° C ) Schukey Delta Omega Machine :

https://www.google.com/search?q=schukey+delta+omega&ie=utf-8&oe=utf-8&client=firefox-b

Probably also by analyzing : "Diode" ! Material,  configuration, function in a conductor, effect
and micronizing such idea :
  https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=28&ND=3&adjacent=true&locale=en_EP&FT=D&date=19920507&CC=DE&NR=4035445A1&KC=A1#
for example for up to 2000x solar field concentrator cells as cooling device or Plasma charge controler

Easier : an " endless belt,  bimetalic" , hot bassin and cold bassin and belt moving from hot to cold to.....

Endless belt motor :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=Endless+belt+motor&AB=&PN=&AP=&PR=&PD=&PA=&IN=&CPC=&IC=

Endless belt generator :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=Endless+belt+generator&AB=&PN=&AP=&PR=&PD=&PA=&IN=&CPC=&IC=

Endless belt converter :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=Endless+belt+converter&AB=&PN=&AP=&PR=&PD=&PA=&IN=&CPC=&IC=

[Hoppy]

Hi Hoppy. Thanks. Yes, I am well aware of all those things. However, I have probably run about
40 or 50 test runs with close variations of this particular arrangement alone in the last couple of months,
so I know well what is normal discharge rates for my specific setup and what is out of the ordinary.
The latest results do appear to be somewhat out of the ordinary compared to all the other test runs. However, I certainly
could still be overlooking something which is contributing to the seeming out of the ordinary results I am seeing, 
and I am still looking into it to see if I could be overlooking something. No one said this type of experimenting is easy.
It really takes a lot of careful analysis and testing to try to avoid getting tripped up. Ha ha.

Hi Void,
The problem in getting any meaningful results is that the useable capacity of an LA battery is clearly very dependant on the condition of its plates. Repeated load test cycles conducted with short intervals between them will show small improvements until the battery condition stabilises, which can take many cycles. Starting a series of test cycles after a few days rest will again exhibit the same general behaviour. The other problem is that equally timed re-charges from set voltage data points do not return equal amounts of capacity to a battery, so with non-linear charge and discharge curves, attempting to scientifically establish that there is a real FE effect when experimenting with LA batteries is in my opinion futile given battery vagaries.

[lancaIV]

Void,  there are " battery charger" studies : with-/ out software controle
By LA-batteries : memory-effect,  the first load DOD sometime decides!

[seychelles]

THE MOTHER AND FATHER OF FREE ENERGY IS EFFICIENCY AND
 ONE NEED TO KNOW WHERE THE ENERGY IS COMING FROM. So ansi is
half correct, so here in Seychelles it is bloody hot and 80% humid, so the energy
is already available from the ambient air.. The air con is a very efficient heat pump.
I rest my case SOORY STIVEP..

[Belfior]

Well this was something I wasn't think I ever see. Egyptian djed pillar made out of stone

https://www.youtube.com/watch?v=-cPuMugnCvQ

maybe tesla coils or other coil under it. I never believed djed was a battery, but a series cap

[Ansis]

About Bedini and LA batteries.
I work much with accumulators and everything which is done by Bedini is BS.
Sorry fans, I love true.
Battery is simple device and every battery die.
LA die of staying a side.
Just leave it without charging and it is dead.
LA must be Always under DC Current with Voltage which is more! than 6×2.1V=12,6V.
I have 13,2V on battery in Winter time always.
I use LM317 chip which works beautifully.
With Voltage allways connected LA battery can work 5-7 years.
Death is comming if we drop LA battery with Undervoltage.
It is 10V.
Never do that.
There is Rick Friedrich.
Listen about Bedini from him, BUT!!! He is sometimes shoot BS too.
He is right about plate deformations.
All other his theories is sometimes right sometimes BS.
Be wise!
Always!
 

[Hoppy]

Good advice Ansis. 

[AlienGrey]

Hmm Lead Acid are crap I have one for my shed roof solar panel the LA cost a fortune and it wastes 50% and the regulator wastes another 30% of the energy I have some super caps I got when an electronics company went bust my advice is dump the lead acid and get Super caps as the price comes down

[AlienGrey]

Another thing The Akula device and Adrian Gustove machine has anyone got it going or had any results with it yet?

Only with Wesleys posting and Solar's posting there might be some other avenues to explore with the phase shift
rotating memento.
Only wasn't it strange how everyone had toroids working with a ring of PP3 batteries in them then it all died 
Joking apart though what happened to all Akulas designs?

[Ansis]

Nope.

[Belfior]

About Bedini and LA batteries.
I work much with accumulators and everything which is done by Bedini is BS.
Sorry fans, I love true.
Battery is simple device and every battery die.
LA die of staying a side.
Just leave it without charging and it is dead.
LA must be Always under DC Current with Voltage which is more! than 6×2.1V=12,6V.
I have 13,2V on battery in Winter time always.
I use LM317 chip which works beautifully.
With Voltage allways connected LA battery can work 5-7 years.
Death is comming if we drop LA battery with Undervoltage.
It is 10V.
Never do that.
There is Rick Friedrich.
Listen about Bedini from him, BUT!!! He is sometimes shoot BS too.
He is right about plate deformations.
All other his theories is sometimes right sometimes BS.
Be wise!
Always!
 

I have to thank Rick Friedrich for putting up all the don smith videos on YT, but I do not care for his theories that much. He is a Bedini funboy and worked with Bedini. Not a big fan of Bedini either. What is his legacy in this world, if we still have no free energy?