Kapanadze and other FE discussion

[AlienGrey]

These are not Schumann's resonance waves in Kapanadze's devices.

I think you will find all the KT device ones that work are base 8 or 9 or a combination and even the Don Smith device was 31k5 (3+1+5=9)!
Or you could do it the dummy's way 31,500khz / 9  goes 3500 times! which is the Univers! or the God number

[Void]

Void,
I'm wondering if it intended to replace the wired grid but not the power generating hubs? I cannot see this idea being viable unless all infrastrucure costs, including de-commissioning and removal of the existing grid networks are bourne by the tax paying public, so therefore, only escalating energy costs to look forward to. Also, the system will need to be able to pinpoint all leakage and illegal tap points to stop guys like you from getting a free   meal  There are likely to be H&S issues that although unlikely to raise real problems to its implementation in the US, may well in Europe under its present political structure. So, likely just a rich guys toy at present.

Hi Hoppy. Yes, I would guess that is the plan. Maintaining the wired power grid is
very costly, so if power corporations could do away with all that cost by sending power
to most places via the ground, they could greatly increase profits, and that is what
corporations are all about. Maximizing profits. Yes, at this point it just appears to be
an expensive experiment, so that is why I was curious who all is funding this project.
It will be interesting to see what they can do with their variation of a Tesla magnifying transmitter
tower under a new name. 

[lancaIV]

Brain-Space~ Gedanken-Raum :  Space-Age-Creativity

https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=Winfield+salisbury&CPC=&IC=

https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=Siegfried+stargard&CPC=&IC=&Submit=Search

https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=Dd&AP=&PR=&PD=&PA=&IN=Manfred+gregor&CPC=&IC=

[r2fpl]

Most likely not. We do not see him make any fine tuning adjustments and the length of ground cable appears not to be critical, as he swops over from the radiator ground wire to the water pipe ground and these are very different lengths of wire. The electrical conductivity of the ground is probably more important, as the device appears to work better on the water pipe ground. I think Ansis is closer to the truth, that the device is using the water pipe with its 'hard' connection to grid earth as part source of the energy supplied to the device. I think the discussion would be more productive if ideas on how indirect grid connected powering might be achieved, that is without a straight and faked direct connection to Tariel's house mains consumer unit, at least to eliminate this possibility, rather than continue with the more complex and esoteric idea of powering with surface waves.

There are rather two possibilities:
1.The system works by supplying it with energy through air and ground. Just like the Tesla wireless system.
2.On the principle of accelerating electrons by an HV resonator.

#1 - the success of such a system is 100% and this is a scam.
#2 - such systems have low efficiency but all work 100Mhz to nGhz
What would happen if they were forced to operate on frequencies of 10Mhz and less?

[Hoppy]

https://m.youtube.com/watch?v=Q9YsuEeCTqs

[Ansis]

Hi!
There is only 1 biggg problem with Kapanadze "coil"(That is not Tesla Coil).
We need Sinuss+Spark.
Every transformer with 50-400Hz range, have metal cores.
Ferrite is used at much higher frequencys.
In original? Kapanadze drawing we see Ferrite+Bifilar type of core-coil.
In fact, my friend tell me, look at Kapanadzes desktop!
There was black material and hammer.
Skype commrades remember what I write about very low technology of Kapanadze.
We see primitive laboratory.
No HiEnd.
Core is veryvery important part of All "FreeEnergy" generators.
TPU or Kapanadze use the same principle.
MagneticField multiplication with Mechanic type of resonators!!!
I think, we must copy Kapanadzes coil.
And yes.
Inductor 6 turns is connected in series with 6+6 fat wires(Litz or simple?).
It is important to feel all lenth of coil with Magnetic Pulse+Sinuss!
It is for Maximum efficiency.
Maybe Spark must be tuned to Maximum and Minimum of 50Hz "modulation".
To make copy of that coil we need 1?- 3? days?
We need 2 generators.
I have only oscilloscope and no generators.
I use PC.

[r2fpl]

The system must be open or grounded. This is the basis for further action.
The principle is the same only describes it differently.

[lancaIV]

http://www.nutsvolts.com/magazine/article/the_magnetic_amplifier


The " magnetic amplifier" for itself is a system control device !  Which makes part for a semi-loop FE-device !
Loop-/ closed systems= storage 

generating maschines: open input/output circuit  !

[Hoppy]

if you look how slopy his kontraptions are made i would say if anything than a few khz .. but never MHZ ore above.

how ever i said this long bevore. Look at all the work they put in to the groundingpoint  and than look what cable the use
one woult think  if you want to have a perfekt ground you keep the distance close to your device and  use som substandcial wire for that.. but they don't so what does this wire?

Agreed, in electrical best practice sense but I think Tariel chose his demonstration area as higher importance over the location of the grounding point. So, the ground is important to the optimum efficient functioning of the device but its length is not critical in my opinion. We observed no evidence that the device could operate without the ground wire, despite Tariel's comment to the contrary. However, we did observe that the quality of the earth connection had a marked effect on the brightness of the lamp load. Also, the heavy gauge of the ground wire and clamp meter readings, suggests that it may have been carrying a heavy current but not necessarily at a full grid voltage level. How could Tariel have powered his device from a cleverly 'processed' high differential ground voltage, so as not to have registered on his consumer electricity meter and without making any wire connections within his service compartment / box / cupboard? Remember, at the time Tariel carried out his box demos, grid power 'tapping' was well practised and widespread in Georgia. We need to totally eliminate the liklihood of this before seriously considering the alternative more technically complex possibilities already put forward.

[AlienGrey]

if you look how sloppy his contraptions are made I would say if anything than a few kHz .. but never MHZ ore above.

however, I said this long before. Look at all the work they put into the grounding point and then look what cable the use one would think if you want to have a perfect ground you keep the distance close to your device and use some substantial wire for that.. but they don't so what does this wire?

I don't think so! You really need to read more

[Ansis]

To lancalV.
Ordinary MA use Direct Current for amplification of Amplitude Current.
I think there is no FE in MA only.
Current came from Accumulators.
If Tariel steal energy from grid, than Figure 9 is candidate of "magic".
But...
Just think little bit different!
If we get super mega magnetic material with Supermaloy or beter magnetic properties, we can save DC.
Chubinidze use Supermaloy(Пермалой).
In Audio Amplifiers Supermaloy use for Small Signal amplification.
Because of High Efficiency transformers was small, but effective in 20-20000Hz.
But material is very expensive and I have no money for experiments, but I use very
small piece for 25Hz flutter and wow elimination. Very effective!

[r2fpl]

To lancalV.
Ordinary MA use Direct Current for amplification of Amplitude Current.
I think there is no FE in MA only.
Current came from Accumulators.
If Tariel steal energy from grid, than Figure 9 is candidate of "magic".
But...
Just think little bit different!
If we get super mega magnetic material with Supermaloy or beter magnetic properties, we can save DC.
Chubinidze use Supermaloy(Пермалой).
In Audio Amplifiers Supermaloy use for Small Signal amplification.
Because of High Efficiency transformers was small, but effective in 20-20000Hz.
But material is very expensive and I have no money for experiments, but I use very
small piece for 25Hz flutter and wow elimination. Very effective!

Supermaloy ? What to do? to Mhz resonance ?

there is no magic core there.

[Hoppy]

To lancalV.

Current came from Accumulators.

What current comes from accumulators? Please expand on your statements.

[Ansis]

To Hoppy.
http://www.nutsvolts.com/magazine/article/the_magnetic_amplifier
You must read that.
It was respond to lancalV link.

[lancaIV]

Hello Ansis, a new beginning  ?  ;)
Okay,

A.  http://www.nutsvolts.com/magazine/article/the_magnetic_amplifier
      Figure 3,4

B.  https://m.youtube.com/watch?v=lB3HBoKPbOQAC AC-circuit + DC-controle circuit

C.  https://m.youtube.com/watch?v=cBFAe3rArCg


Comment : 2nd poste Alex Manzanero  then Doug Konzen
https://m.youtube.com/watch?v=QoYDbHhbaNY. 
Part 6

https://m.youtube.com/watch?v=pDXKnk9hFMI
Part 5
https://m.youtube.com/user/kdkinen

EMF + MMF
https://m.youtube.com/watch?v=RIAQvvfAE0M

EMF + MMF

https://tesla3.com/hilden-brand-jack/
  "..Double the flux lines four times the force... "  electromagnetic valve  a. DC circuit b. Impulse DC   a2. force amplifying  b. force neutralisation


1 x AC- circuit + 2 x DC circuits

Magnetic Amplifyer circuit feed and battery feedback circuit  ? ( Made in Algerie)

https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=2&ND=3&adjacent=true&locale=en_EP&FT=D&date=19831209&CC=FR&NR=2528257A1&KC=A1#

The above feed and feedback circuit also useable here :
https://worldwide.espacenet.com/publicationDetails/description?CC=JP&NR=H11204353A&KC=A&FT=D&ND=3&date=19990730&DB=EPODOC&locale=en_EP#