Wesley's Kapanadze and other FE discussion forum

[Void]

I  did not touch  any other terminal of the lightbulb as you see on the pictures
Wesley

Even if you are not touching the other terminal of the light bulb directly, your hand holding the bulb glass capacitively
couples to the other terminal on the bulb. If the electric field is strong enough, that will be enough, especially at higher frequencies. 
The fact that you have ignored the question a few times about what input power levels you are using to light the bulb is not
good at all Wesley. The electric field must be very strong to have caused sparking in your mouth,
so presumably you are using a relatively high amount of input power to create the HV electric field.

[AlienGrey]

I agree with you. Wesley plays with classical electromagnetism, highlights classical phenomena, and tries to bluff us by lying by omission: unknown transmission power, unknown received power, unknown distance between light and antenna, unknown antenna type, capacitive coupling never mentioned....
I too played at remotely turning on lights (only 10W RF for this one). When you know the domain, you can see his tricks.  He would like us to believe in brilliant discoveries when there is nothing, perhaps he deludes himself out of ignorance or wants to parade. Our objections are ignored, and the thread is continued with irrelevant comments, and with links to academic science that we never see him to rigorously apply to what he is talking about. This thread has become a joke.

Instead of faffing about around the bush trying to display some kind of guilt trip to the other party, why don't you ask the other party if they are interested I a nondisclosure contract, or if they are interested in any other way, instead of just winding them up?
No offence but then everyone might get what they want.

[Void]

Everything in it's time frame
Nothing brilliant just physics
Read my previous post again
You may have noticed that there was no metal structure near by. I was touching antistatic board specially made to prevent electrostatic discharge
and damage of sensitive electronic components.
So please show me anyone who presented such experiment in youtube with 120W equivalent of incadescent lighbulb.
-that was maximum I have tried ever with this setup till now
Wesley

Hi Wesley, as already mentioned, without at least indicating the total input power applied,
your demonstrations of lighting a LED bulb does not tell anyone anything at all. I have explained why.
Read my previous posts again.

See the attached picture where I show the origin of this type of secret free energy technology.
I can't reveal any more details beyond what I have indicated on this picture of Tesla, as I
am planning on patenting this technology so people don't try to steal my IP. Once I have
patented this, I may reveal more details if enough people suitably grovel at my feet.
All the best...

[Ansis]

And yes, Fabrice Andre use 220W from grid!!!
Kapanadze use Power from Grid in Turkey experiment!!!
Kapanadzes device is Amplifiere!!!
There is no FE.
GreenBox video last only some minutes and after listening of "tapes" I know about that!

[lancaIV]

To lancaIV.Re : to Ansis

You are supermega troll of overunity.com!
Who makes me an offer to built a COP=1 and doing a grid connection is for me not a troll but in simple words a.

 an equipment seller b.  a maths idiot

Your jazz is funny!
I am not doing jazz but listen to jazz-playrrs and play their music or vids

You are a Clown!    Life is funny, CHARLY, n'est ce pas?

You are like a bomb in the ass!    For anybody a foot is enough

Here is the End.I hope not that you are planning your sudden final 


 Music!

Music-box A https://m.youtube.com/watch?v=r1OnVxfy6iM.


to Z.  https://m.youtube.com/watch?v=66zUY8UZn4M

wmbr OCWL

[SolarLab]

F.Y.I.

Interesting and helpful REAL LIFE examples of the use of modern Computer Aided
Engineering (CAE) to find the answers and solve the mysteries of excess energy generation.

Example #1.

https://www.youtube.com/watch?v=rCC8mY7ykM4

Intro/Overview: "Watch to the end if you want to understand! Installation Principle
Ruslan Kulabukhov 2019, Tariel Kapanadze, Stephen Mark, Akula083 Calculator
http: //cxem.net/software/download/cal ... Single Phase Current Push System
https://vk.com/doc442363570_487639626 Two Phase Current Push System
https: //vk.com/doc442363570_488467031 Two Phase Current Push System for Meier
Cell https://vk.com/doc442363570_489097188" 

Example #2 (today).

Another proof that modern Computer Aided Engineering (CAE) software tools can/will
definitely assist in FE research.
https://overunity.com/15154/selfrunning-free-energy-permanent-magnet-motor-the-simon-magnet-motor-motor/msg530048/#msg530048

From Simon to Hartiberlin [Stephan posting]: Quote, in part:

"Now, after having perfected my understanding of how to rightly use ANSYS Maxwell,
I simulated the two modified versions that he built; the software confirmed the behaviour
of the prototypes.The software confirmed the extremely high cogging torque and the
extremely short deceleration time.

Here's the sweet part. The software revealed that for the prototype to work, the rotor
magnets should be reduced to either 40, or 30, or 20, or 10, etc. (Note, his prototype
has 50 rotor magnets.) The software also revealed that the net forward and net back
magnetomotive forces(mmfs) of the prototype are heavily dependent on the airgap
lengths between the rotor magnets." 

It's for sure happening; as hoped and expressed - yay!:

Using modern Computer Aided Engineering to solve the Excess Energy (Free Energy)
mystery; as promoted and predicted here in this "SAEC Project paper presented in the
forums December 29, 2018:

https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg529052/#msg529052

ALTERNATE ENERGY DEVELOPMENT - TIME FOR A PARADYNE CHANGE

Quote, in part:

"Recent capabilities in the areas of worldwide networking and Computer Aided Engineering (CAE)
have reached a level where it is now possible to employ skilled energy developers throught the world
by linking them all together to collectively engineer solutions through the use of a coordinated, modern,
analysis and simulation engineering tool set."

Interesting - could be we're "Three in the Green," "On course and on the Glide Path,"
"our Rate of decent is good," and we'll be at the "Destination Gate" within a few minutes!

Just a heads-up about some real work that's actually taking place out here... Hopefully it will
help to relieve the depression and dispare that some appear to have right now and serve to inspire!
Some REAL proofs. Lots more in the pipeline.

FIN

 

[forest]

Some interesting videos
https://www.youtube.com/watch?v=BPk345S4GGY
https://www.youtube.com/watch?v=eH2TWPJiwEA
now, you can do a third coil on top of this loosely coupled and  this will be very close to Kapanadze device I think

[Hoppy]

And yes, Fabrice Andre use 220W from grid!!!
Kapanadze use Power from Grid in Turkey experiment!!!
Kapanadzes device is Amplifiere!!!
There is no FE.
GreenBox video last only some minutes and after listening of "tapes" I know about that!

Hi Ansis,
Nothing surprising about that but what is amplified - the voltage?

[AlienGrey]

This is 90 deg phase shift try getting that out of a TL494

[lancaIV]

Some interesting videos
https://www.youtube.com/watch?v=BPk345S4GGY
https://www.youtube.com/watch?v=eH2TWPJiwEA
now, you can do a third coil on top of this loosely coupled and  this will be very close to Kapanadze device I think

The second video with the Zatsarinin transformer is the change from Kirchhoff circuit law to Ampere law well demonstrating. !
https://m.youtube.com/watch?v=Dz0GUqxCPp4

https://books.google.pt/books?id=Xry7DAAAQBAJ&pg=SA4-PA22&lpg=SA4-PA22&dq=zatsarinin+transformer&source=bl&ots=XVbJ2PchAJ&sig=KuRjHfd37JyNS01yg4hSkOjQI-Q&hl=de&sa=X&ved=0ahUKEwiGkteQqe7fAhWh1-AKHY68DhkQ6AEIFzAE#v=onepage&q=zatsarinin%20transformer&f=false
not unknown :
https://www.overunityresearch.com/index.php?topic=2315.0

[stivep]

Thank you SolarLab for delivery of Russian News

Спасибо за доставку ваших новостей.
Трамп называет его поддельные новости. Посмотрите на это снова.
Wesley

[stivep]

type of the dielectric
Look at sparks at the edge
compare it  with video https://youtu.be/KLAPRNWuAn4?t=1187
Wesley

[Void]

Hi Wesley. I did already point out to you here that those anti-static blocks that you have
contain a lot of carbon (very conductive) to give the material its anti-static properties.
This is why the material is a dark black color. The material may be covered with a thin plastic
coating to act as an insulator to lower voltages, but HV will pass right through such a thin plastic
layer and be conducted away, which is how it works as an anti-static material.

If you measure the surface resistance with an ohmmeter, does it measure infinite resistance?
If so, then it is probably coated with a thin layer of insulating plastic. Basically those carbon filled
anti-static blocks are about the same as using a block of conductive metal.

[stivep]

_{Hi Wesley. I did already point out to you here that those anti-static blocks that you have
contain a lot of carbon (very conductive) to give the material its anti-static properties.
This is why the material is a dark black color. The material may be covered with a thin plastic
coating to act as an insulator to lower voltages, but HV will pass right through such a thin plastic
layer and be conducted away, which is how it works as an anti-static material.
If you measure the surface resistance with an ohmmeter, does it measure infinite resistance?
If so, then it is probably coated with a thin layer of insulating plastic. Basically those carbon filled
anti-static blocks are about the same as using a block of conductive metal.}

https://www.quadrantplastics.com/na-en/products/engineering-plastics/standard/tivarr-uhmw-pe-family-of-products/tivarr-dryslide/
No my friend  the resistance is  >20GOhm
Product Overview   
Electro Static Dissipative 
Ideal for dusty environments 
Helps reduce surging 
Won't mar packaging or products 
Corrosion-resistant 
Self-lubricating   
Reduces noise 
No moisture absorption
Product Data Sheet
http://qepp.matweb.com/search/DataSheet.aspx?Bassnum=P1SMP17&ckck=1

Product Details:Modified with special lubricants, TIVAR® DrySlide has the lowest coefficient of friction of any of the TIVAR® products.
The enhanced coefficient of friction and anti-static properties make TIVAR® DrySlide an excellent performer in dusty environments.
Even damp boxes or parcels covered in shrink-wrap won't stick to TIVAR® DrySlide. In addition, the enhanced surface lubricity won't
mar packaging or products, but allow them to move freely without jamming from dirt, grit or static build-up.
TIVAR® DrySlide is and available in 48" x 120" sheets, with gauge sizes ranging from 1/4" to 2".

Wesley

[stivep]

Wesley