Kapanadze and other FE discussion

[v8karlo]

Happy New Year to everyone in the world!

[vasik041]

It is the right observation. Power trough L2 is bigger then trough L1.Remove C3 and work with C1, C2 only. The L1 will light up but L2 will light up more. You will still see the difference in power.

You CAN NOT fake the heat if there is no real power!

Do your experiments and change your mindsets.

There is only one small issue here. Power on L1 is NOT power consumed from power source. Current is not power.

[Belfior]

There is only one small issue here. Power on L1 is NOT power consumed from power source. Current is not power.

Yes well L1 is still connected to the grid. With an AC grid it does not matter, which way you plug your device into it. It is push&pull and not from plus to minus. This means the voltage has to be there to light the L1 bulb AND the current in L2 seems to be bigger.

I think what you are saying is that maybe the same current goes trough L1, but there is very little voltage?

[lancaIV]

V8Karlo,which savings or circuit work C.O. P.  should be ex(s)pected ?
At first a great work which gives partial explanation these methods related :
series connection
  https://patents.google.com/patent/WO2004100349A1/en
Voltage step down transformer
  https://patents.google.com/patent/WO2016070292A4/un

load controler
https://patents.google.com/patent/US5130608A/en 

                              !! WOW!!
 ! - effect " Example 1" saving results related
And about dotation/ donation let me see
Sincerely and good entrance in 2019 and success

OCWL
p.s.: in search for the cheapest " zero energy" infrared heat system 
https://patents.google.com/patent/GB2203529A/en   + most efficient energy drive !?"ONLY" 15° C ambiental room temperature ?
In the 70' 13° C has been the average indoor ambiental temperature in the U.K. !

[vasik041]

Yes well L1 is still connected to the grid. With an AC grid it does not matter, which way you plug your device into it. It is push&pull and not from plus to minus. This means the voltage has to be there to light the L1 bulb AND the current in L2 seems to be bigger.

I think what you are saying is that maybe the same current goes trough L1, but there is very little voltage?

Power from source != power on lamp

[v8karlo]

Yes: the message is: brush up on basic electrical principles to avoid getting mislead!

It uses simple existing principles. It does not violate any of the laws. It is made to be simple.

If I used 100 components in there, nobody will be able to understand. It is stripped to minimum so you can understand it.

[v8karlo]

Build CZero. Start from there. You all have voltmeters.

For a start you don't need anything else.

At the end it is project which can be made in an hour?
Why talk to much?

[seychelles]

my advise is to use low esr electrolytic capacitors to increase
life expectancy and increase efficiency.

[v8karlo]

When powerline in second part of Zero circuit has more voltage in it it becomes source.
It is trying to move back to grid. It opposes grid. Grid is at lower voltage at that moment.
At that moment it is trying to feed the grid.


It becomes source.

[lancaIV]

When powerline in second part of Zero circuit has more voltage in it it becomes source.
It is trying to move back to grid. It opposes grid. Grid is at lower voltage at that moment.
At that moment it is trying to feed the grid.


It becomes source.

https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=12&ND=3&adjacent=true&locale=en_EP&FT=D&date=19900104&CC=DE&NR=3821856A1&KC=A1#
zero crossing : http://translationportal.epo.org/emtp/translate/?ACTION=description-retrieval&COUNTRY=DE&ENGINE=google&FORMAT=docdb&KIND=A1&LOCALE=en_EP&NUMBER=3821856&OPS=ops.epo.org/3.2&SRCLANG=de&TRGLANG=en

[v8karlo]

You mention that this may be a relationship with Kapanadze. You can say what you have on your mind.

The Kapanadze device is lighting bulbs and that energy his device is returning to source at same time.
That is why he needs to add to source only a little to keep it going. It is obvious when you look his videos.
The Kapanadze himself said : The energy is not lost, it is been captured!

How do you capture energy which is already used?

I think, but this is only my thought that he using something like Q device principle!

It is my observation I made only on what I saw in his videos.
He had more than 20 years to perfect it, but in first videos he started lighting up only small bulb in his hands in that video.He didn't start with monster.

[v8karlo]

Well, I think you are a little closer to the truth by suggesting that his devices are connected to the grid.

If you are using 20A and returning 19A to source do you need grid?
You have to add to source only 1A to keep it going and rest 19A is for you.

[lancaIV]

v8Karlo,who claims such work process efficiency ?

About pulsed dc devices and how these function/ oscillation generators parametrical works :
https://worldwide.espacenet.com/publicationDetails/description?CC=US&NR=5942858A&KC=A&FT=D&ND=3&date=19990824&DB=&locale=#

[Hoppy]

If you are using 20A and returning 19A to source do you need grid?
You have to add to source only 1A to keep it going and rest 19A is for you.

I like that idea but why not return all of it and just start it on a 9V PP3 battery.

[Jeg]

I like that idea but why not return all of it

Because there are losses that have to be compensated. Hi Hoppy