Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1147197 times)

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #525 on: November 07, 2018, 06:49:52 AM »
Hi Wesley and members,
I am posting this Anomaly related to accelerated frequency output as just discovered from the kapanadze device of Akula.I also considered this device a Electron accelerator device.

The output of the kapanadze coil with 10nf 2kv ceramic cap and 5watt bulb in parallel produce around 36khz unfiltered waveform.In Akula circuit there is a low frequency line filter then a 5nf cap is connected at output.
But the input of  the IGBT gate is driven at around 12khz.This is without powering on the Tesla coil yet.The 26 turns of toroid does seems to play a role only if 40nf 1kv ceramic capacitor is connected at it's output as shown in video.
I am still little lost as this is achieved merely by trial and error method using various hv ceramic capacitor at my disposal.
My youtube video posted today to reveal this Anomaly related to the input and output frequency.Screenshot was extracted from uncut video.
https://www.youtube.com/watch?v=_o2Ecwd71lU
----------------------------------------
Using resonance nothing new was achieved since output frequency would be the same as the input frequency.Kapandze coil would behave like a step up  transformer but Air core.
Yes i am little lost at this point also because the last round i achieved pure 80khz sine-wave at output only if tesla coil was activated.But 100nf 2kv cap was used at output.But i did not record all the configuration made the last round around 1 year ago.Then took a year break from this device.

Tynoo

  • Newbie
  • *
  • Posts: 15
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #526 on: November 07, 2018, 10:47:23 AM »
Hi Magpwr

Congratulations for your work.The last scheme that is out there...maybe it helps!
See the green and red circle, feeback to the IR 2153 oscillator.

https://postimg.cc/7f8dFy3x

Regards
Tynoo

Hoppy

  • Hero Member
  • *****
  • Posts: 4135

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #528 on: November 07, 2018, 01:16:42 PM »
Magpwr,
https://www.youtube.com/watch?v=JzSBWJu24gU
Hi Hoppy,
I have seen the video have also achieved the damping type of waveform for some other configuration depending on the capacitor value used at output coil.She tried to show 1/2 and 1/3 harmonics as well but the waveform does looks very distorted.

----------------------
Honestly the hint i have not mentioned  but was shown in Tariel Kapanadze video.
Tariel was actually using much lower frequency via spark plug in order to shock kapanadze coil to self oscillate at a much higher frequency than the input.

If you try pulsing a typical step up coil manually(low frequency)you may get bulb to light from the back emf.
But in order to power higher load there would have to be some kind of high frequency ringing happening in the kapanadze like coil.
This which we have not figured out on how to unlock fully.


Akula was using around 1.7Mhz much higher frequency to achieve similar feat.


The only trick left is how to apply low frequency to unlock kapanadze coil such that it will yield higher frequency.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #529 on: November 07, 2018, 02:42:26 PM »
Magpwr,
https://www.youtube.com/watch?v=JzSBWJu24gU
Magpwr and hoppy, both interesting videos isn't it golden ratio you want here?   ie  1,2,3,5 etc

I tried using a pic chip a few years ago to generate the sequence with EW 50/50 outputs it starts to get complicated
with a micro and you need a vast amount of memory and you get jitter and 4 bits is the maximum.

If you look at the TK glass box the backboard has a pile of power transistors and other components
you don't suppose e is using simple logic to get golden ratio numbers and thus harmonics as an accelerator.

Any way to decide by 3 is easy with a CD4013 and a CD4093, as an xor gate it couldn't be easier
I will post a circuit later.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #530 on: November 07, 2018, 04:04:21 PM »
Read the section entitled: 'ON THE LIGHT PHENOMENA PRODUCED BY HIGH-FREQUENCY CURRENTS OF HIGH POTENTIAL AND GENERAL REMARKS RELATING TO THE SUBJECT.' in the following link:

https://teslauniverse.com/nikola-tesla/articles/light-and-other-high-frequency-phenomena
Is Kapanadze using a Tesla plasma lighting effect using high frequency and high potential on regular light bulbs to achieve high illumination from a conversion of a low power, low frequency input??

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #531 on: November 08, 2018, 05:00:55 PM »
Hi Wesley. In my opinion, unless a person can at least show a video reasonably demonstrating that a
particular configuration produces 'over unity', or at least shows an interesting or unusual effect,
then any 'theories' and schematics, etc. that someone presents are likely not going to get too
much traction. It will likely just be seen as more unproven speculation to be added to the mountain
that can already be found here. This should really be a given at this point. :)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #532 on: November 08, 2018, 05:17:56 PM »


7. look at video https://www.youtube.com/watch?v=zg8V9XCgIqs ( no sound)
Fabrication of a KNO3 capacitor
Explanation of the video is in point below Note2a
==============================================================================

Ferroelectric  Capacitor

The construction of a KNO3 capacitor, and the hysteresis loop it displays.
The circuit used is the standard Sawyer-Tower circuit.
From TLP: Ferroelectric materials, http://www.msm.cam.ac.uk/doitpoms/tlp...
the link is not working but: there is copy  here explaining what video is about  https://www.doitpoms.ac.uk/tlplib/ferroelectrics/printall.php
For these who want to know more  https://www.doitpoms.ac.uk/tlplib/ferroelectrics/index.php


It will help also  to look  at:
https://www.youtube.com/watch?v=X0WnddW5gZI
https://www.youtube.com/watch?v=p7SkE5pERtA
Ferroelectric capacitor

https://en.wikipedia.org/wiki/Ferroelectric_capacitor



Wesley
« Last Edit: March 09, 2023, 02:08:31 AM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #533 on: November 09, 2018, 03:16:36 AM »
Note#3
from video https://www.youtube.com/watch?v=zg8V9XCgIqs

Square hysteresis:
Quote
What the square S-curve hysteresis loop means is that, in one region of operation, with only a very tiny voltage change,
you can get a rather enormous current change from that capacitor. 
In another region of operation, you can get a very large voltage change from the capacitor for a very small current change. 
In other words, biased into one region, you have essentially a voltage device. 
In the other region, you have essentially a current device.  Neither device will "cost" you very much energy to operate it in its region. 
However, if you then nonlinearly mix the two outputs just right, as we filed on methods of doing, then bingo!
You had a mixer device whose output now had both large current and large power, but you "paid for" and input not nearly so much "energy dissipation"
(remember, engineers calculate energy dissipation flow, never energy transport flow!)
to the mixer as what would be output by the mixer.
 The whole question is this. 
We all know about ordinary nonlinear mixing and mixers.   
We know that two signals can indeed be mixed nonlinearly.
Can we build a nonlinear mixer and a dual circuit, where we feed a voltage-like signal in and also a current-like signal in
to the mixer, get the two combined into a high voltage, high current signal output, and do that without back-field coupling onto the two input "signals"
to force equal energy dissipation in the input

3a
Fabrication of a KNO3 ferroelectric capacitor
A capacitor can be made from potassium nitrate (KNO3), which is ferroelectric below 120°C.
(The temperature dependence of ferroelectrics will be explained later.)
The following video clip shows the construction of a KNO3 capacitor, and the hysteresis loop it displays.
The circuit used is the standard Sawyer-Tower circuit.
The result is a hysteresis loop.
This arises from the fact that a system does not respond immediately to a given set of external conditions.
Rather, there is a history dependence and this is the basis for memory (two states are possible in E=0).
 doitpoms@msm.cam.ac.uk, © University of Cambridge DoITPoMS, Department of Materials Science and Metallurgy, University of Cambridge

3b.

Tom Bearden:
Quote
Ferroelectric Capacitors and the Magnetic Resonance Amplifier
In a nonlinear ferroelectric capacitor there are three major nonlinear processes involved, so it is possible to carefully choose and arrange
conditions so that the current through the capacitor moves against the voltage across its terminals.


With adroit switching and timing, and some consideration for resonance effects, it is in theory possible to use such highly nonlinear effects in a circuit to allow
(1) an overpotential at the terminals of the battery as a reaction from the ferroelectric capacitor,
(2) consequent recharging of the battery via that back potential on the battery side, while the load is also being powered,
(3) consequent driving of the load on the load side of the terminals, and
(4) having a bypass ferroelectric capacitor across the terminals of the battery, where the capacitor is in the "current against the voltage" condition.

McLain and Wooten patented a great little MRA (magnetic Resonance Amplifier) system, based on that application.
 Dr. Robert Bass, a very fine electrodynamicist of exceptional knowledge, experience, and ability wrote the patent for them, and assisted in their work.
 For that he was persecuted, unjustly attacked, and suffered financial difficulties.
The "system" does not forgive highly qualified scientists who take a serious interest in "perpetual motion machines" — as permissible Maxwellian
open dissipative systems are erroneously and derogatorily labeled by the orthodox scientific community.
 Any scientist violating that inquisition suffers the consequences.
After technical discussions back and forth, the Patent Office even notified
Wooten and McLain that the patent had been accepted and the patent would be issued. 
Within days, to their consternation the patent was rejected and that was the end of that.


Wesley

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #534 on: November 09, 2018, 08:09:18 AM »
Note#3
from video https://www.youtube.com/watch?v=zg8V9XCgIqs

Square hysteresis:

3a
Fabrication of a KNO3 ferroelectric capacitor
A capacitor can be made from potassium nitrate (KNO3), which is ferroelectric below 120°C.
(The temperature dependence of ferroelectrics will be explained later.)
The following video clip shows the construction of a KNO3 capacitor, and the hysteresis loop it displays.
The circuit used is the standard Sawyer-Tower circuit.
The result is a hysteresis loop.
This arises from the fact that a system does not respond immediately to a given set of external conditions.
Rather, there is a history dependence and this is the basis for memory (two states are possible in E=0).
 doitpoms@msm.cam.ac.uk, © University of Cambridge DoITPoMS, Department of Materials Science and Metallurgy, University of Cambridge

3b.

Tom Bearden:


Wesley

hi stivep,
I recall there was mentioned of S-curve hysteresis capacitor as one of the important requirement in one of the free-energy device i can't recall if it was Don smith or someone else.This was way before i even stumble upon Kapanadze discussion.
I can only recall fragmented information from my memory (Only Human)-There was mentioned of one of the American base company that manufacture this type of S-curve hysteresis capacitor for the Navy or military.The last thing i can recall from my head that this type of capacitor was not available to public.Around 10years have past from my last research related to this cap.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #535 on: November 09, 2018, 12:10:43 PM »
Hi Wesley, So how big is this capacitor and how do we build such a capacitor to work in this device and have you any more build information?

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #536 on: November 09, 2018, 10:52:20 PM »
SolarLab thank you for update
=============================================
Thank you very much  to speedy125
The new member for  helping me to find links with Ferrocapacitor
Please look at:
topic
Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
Replay #6264   March 31,2011    Page 418  https://overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg280009/#msg280009
          #6297    April 03,2011      Page 420  https://overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg280255/#msg280255
          #6304    April 03,2011      Page 421  https://overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg280291/#msg280291
          #6309    April 03,2011      Page 421  https://overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg280301/#msg280301 
                                                 Page 624  https://overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg307131/#msg307131                 

Wesley
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
« Last Edit: November 10, 2018, 11:16:51 AM by AlienGrey »

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #538 on: November 10, 2018, 09:24:30 PM »
http://eng.sepc.ac.cn/images/mbs1.png  do you see energy here ?

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #539 on: November 10, 2018, 09:48:12 PM »
I see energy every where. :)