Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1147349 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #465 on: September 23, 2018, 09:15:21 PM »
Mag here in Poland there is a very large copper producer KGHM Copper. Some producers add zink to lower the cost of copper and other elements don't presume it's all the same copper wire..


Like Wesley has said isotopes of copper are many .. It may be the impurity that has an affect on the Russian Kapanadze device.. As of yet unknown ...A scientific method was not done here...


Variables are many it's like a combination lock as one adds to the depth of the tumblers in that, the chance to hit the right combination is in the orders of magnitude...randomness will not work trying to unlock that tumbler safe.


Complexity is in the state of mind as to an engineer looking at a suspension bridge it looks very simple to build and yet to an average man it is a hard thing to understand the complexity of individual parts...


As of yet that elusive effect in the " west " is missing.
Acca I don''t have a white coat  nor do I have a doctors degree but I have said and got ribbing back from many, perhaps this might help
it came from else where in this internet  youtube concerning different metals but i will say it again 'iron or steel, this metal the skin effect 'charged
partials are one of the slowest to travel' and the gains are obvious !

Thanks Acca for mentioning this phenomena and Dr Tanju Argun university of Ankara Turkey~




Quote

 “The Conservation of Energy Law”? edited and quoted.

In 1993 Tom Bearden came up with the idea of “Massless Displacement Current”. I was inspired (Tanju Argun) by that.
As you might know   there is a process called “The Skin Effect” where Electrons (charged particles),
before forming a current, must travel from the center of a conductor to the peripheric rim to travel. The time,
the electrons traverse from center to the rim is called the” Relaxation Time”. We are talking Microseconds here. So, what I did  here was to simply,
 by just letting a big Capacitor to sniff the Potential of a 24 volts Battery for only 100 Microseconds. During these 100 microseconds,
 electrons start to move to outside perimeter of the conductor to start the current.
But unfortunate for them time is not enough to form the current.
Instead those trapped electrons just attain a “Potential Gradient “across them.

So, the capacitor gets the Potential Difference across it with minimum current, which is called the “Mass less Displacement Current”. In analogy;
the young man “the capacitor”, just catches -a glimpse of a passing by super-mini skirted young lady- “the battery”. Capacitor is loaded with minimum power.
 Ideal case is to use iron wire or doped conductors and plates to block the electrons from forming a current by increasing the “Relaxation Time”.
After 100 microseconds, the Mosfet switch opens and disconnects the battery from the capacitor.




AG

nelsonrochaa

  • Hero Member
  • *****
  • Posts: 653
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #466 on: September 23, 2018, 10:50:21 PM »
I find this cherkunov guy a bit strange. If he is posting these antigrav videos why doesn’t go around the thing with a stick to show no wires? In one video he does,  but only goes in the front of the device. The plates are not level, but the device floats straight? What kinda force is that?

Antigravity was patented by tt brown already:)

antigrav levitation is not same thing like levitation :)  .I made a video showing some sort of levitation some months ago  with diamagnetic materials like aluminum under influence of dielectric fields , where is possible levitate a aluminum even without any wire connected .  https://youtu.be/kXdBKhVG2Bg?t=1
I really don't believe that those videos show any type of real anti gravity process , maybe some sort of levitation but not some type of antigravity  :) .

chears

Nelson Rocha

cheappower2012

  • Full Member
  • ***
  • Posts: 245
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #467 on: September 24, 2018, 01:28:20 AM »
On the Cherkunov device:
When someone levitates an object,say thru the use of magnetic fields
the magnetic field is transferring the force of the weight,thru action/reaction
this is not an anti-gravity effect.You are merely pushing against the magnetic field,this provides a lift by repulsion which has a limited range,it transfers the weight to what ever its pushing against.In
hes device,lets say it weighs 3 pounds,you are providing a 3 pound lifting force to counter
 the weight of the object,it is not pushing against anything.If it is not a
 trick, it is extremely important,could an object escape the earths gravity
if it produced a small up ward force not dependent on chemical fuel.
Consider a balloon with helium it keeps going until it reaches the edge of the atmosphere.
A device if real would keep going until it escaped the earth.
The problem is if its real and he does a good test of hes device the government will move
on him quickly,can't have there enemies have this information.
Right now he would be considered a crackpot.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #468 on: September 24, 2018, 04:21:41 AM »
---------------------------------------------------------------------------------------
https://www.youtube.com/watch?v=iXLWu6jSHQU
https://www.youtube.com/watch?v=bPqEtBYnkmQ
https://www.youtube.com/watch?v=X0WnddW5gZI
https://www.youtube.com/watch?v=0xx_cyo3OX0
https://www.youtube.com/watch?v=3r4wytAjrU
https://www.youtube.com/watch?v=jAsRp4dvJCU
https://www.youtube.com/watch?v=-FsmEwlgF94 (video  from our perspective  valuable as he uses soft iron wires  substituting ferrite core.)
https://www.youtube.com/watch?v=nHjayUoi8L4
https://www.youtube.com/watch?v=ARKHcq-Ee8g
https://youtu.be/-kLkc7uS-r0?t=6 rusting of ferrite particles is usually done in porcelain cylinders.
https://youtu.be/BHuWloNGo6c?t=47 we are not interested with neodynium, we  are interested with process of manufacturing only
https://youtu.be/HhpPwg89j6I?t=70  Wesley's Wayne Kerr  Magnetic Analyzer
https://youtu.be/flkrwW4Ht-I?t=14     Wesley's LCR
https://youtu.be/izzujmKROWI?t=106Wesley's Beta and Alpha
https://youtu.be/hnY1Zbi7sgM?t=21another DIY
https://www.youtube.com/watch?v=z8jybTInqeQ furnace
https://youtu.be/noGGcyPHtdI?t=166 not importanthttps://www.hitachimetals.com/materials-products/soft-ferrites/ni-zn-materials/stress-and-magnetic-field-resistance.php
http://tscinternational.com/tech13.pdf
http://www.fair-rite.com/wp-content/uploads/2015/08/2007.pdf
https://www.youtube.com/watch?v=QvwXMPnbG8k ferrite material
https://www.youtube.com/watch?v=bt_0QcvsIbo    ferrite material
http://www.hpmemoryproject.org/an/pdf/an_1297.pdf
http://www.johnbreslin.org/files/publications/19960900_vpec1996.pdf with HP 4194A ( Wesley's Lab) for Low frequency
second picture
http://www.ieice.org/proceedings/EMC14/contents/pdf/16P2-B3.pdf  for Low frequency
third picture

---------------------------------------------------------------------------------------------------------------------
http://literature.cdn.keysight.com/litweb/pdf/5980-2862EN.pdfhttp://www.datatronics.com/pdf/distributed_capacitance_paper.pdf we do the same  but with low frequency.
Capacitance  of transformer is important  at resonance. In Lithuania Experiment  we had been  at audible LF region.
Strong vibration. 
Figure 6 shows the phase angle of current plotted against frequency, using a Hewlett Packard HP-4194A.  The plot is the same coil as discussed in (2). The resonant frequency is 499 KHz

https://www.researchgate.net/publication/254057540_Analysis_of_the_Complex_Permeability_Versus_Frequency_of_Soft_Magnetic_Composites_Consisting_of_Iron_and_Fe73Cu1Nb3Si16B7
The complex magnetic permeability of most materials varies with frequency with iron powder peaking when exposed to magnetic fields close to 100 kHz [17].
Iron particles on the other hand have a peak complex permittivity of 50 at around 100 kHz [17].
iron filings are readily available at particle sizes of around 1 μm, and can be readily mixed with water, soil, or in our case, sand particles with average sizes of 1 mm as shown in   ...


Wesley
« Last Edit: March 09, 2023, 01:34:03 AM by stivep »

PolaczekCebulaczek

  • Full Member
  • ***
  • Posts: 160
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #469 on: September 24, 2018, 04:31:53 PM »
Cherkunov levitation device is pure fake, I was about to debunk his outdoor demo and make a video using trash can lid but I could not find a suitable place nearby my house (two trees on the sides of an open field) its all about fishing line on bright background (sky) and the stick test is so simple to fake that you would laugh, I can tell you how its done but you will be ashamed that you didn't notice how its done.

There is no way on the world to generate such a lift using weak EM and magnets.

Same thing may be about Kapanadze but not that easy, for kapa-hoax I have some ideas but that involves "displacement ground current" in truly russian (and dangerous) fashion.

Right now I have no time for this stuff, working my ass of to survive in ex soviet poor country (bogactwooo macie w tej amerce nie to co u nas w polszy za miedza u putina )

I'm till working on woobling and vibrating magnetic motor project (not OU but just cool stuff)

Thats my two cents for now.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #470 on: September 25, 2018, 04:21:25 PM »
Hi,
Finally i have assemble the Kapanadze PVC support and Antenna after around 1 year of inactivity on this device.

Akula would likely use solid core copper "6 AWG solid core copper" which i used white shrink wrap as shown in yellow marker for Antenna.

This device was oscillating at it's own frequency around 80khz(Sine-Wave from kapanadze winding output) for input frequency around 10khz(parametric waveform, 1/3 sub-harmonics) which the circuit i have assembled was designed to operate  at 1/3(Frequency divider) of it's resonance frequency after 3 turn toroid which the L/C resonance test was around 30khz.I had overlooked impedance mismatch back then and did not measure voltage at the 26 turns on toroid after the kapanadze was operating at a higher frequency
Forgot to mentioned tesla coil was on pulse interrupted at around 1.7Mhz around (multi pulse at 55us...60us wide need to re-confirm again base on last trimmer setting)for the accelerated frequency 80khz which appear as pure sine-wave.
-------------------------------------
I am still the only person in this forum whom did not use resonance since my belief before the findings was the kapanadze winding needs to oscillate at it's own frequency but unknown at that time whether  it will go higher or lower than the drive frequency.------------------------------Hint for me was provided in this video of Akula device translated by Wesley.The device winding did look similar to Kapanadze and Akula was applying 1/3 resonance but in the reverse order.Coil was driven at around 55khz but the internal winding was designed to osc at 155khz which is around 3 times of input frequency.
--------------------------------------Reverse engineered Ruslan circuit and found that his device was using divide by12 (6 from 4017 and div 2 from Flip-Flop)
Tesla magic,prime number 3,6,9,12..That's all for now.It's late.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #471 on: September 30, 2018, 03:40:53 PM »
Hi everyone,
Latest findings while fine tuning device..many preparation to do before lift off. :)
Previously i mentioned 4017/74HC4017 configured as divide by 3 for Akula device.But the duty cycle output from 4017 isn't 50% (It's more like around 65% ) even if a 50% duty signal is applied to 4017 clk input.
Today i discovered the output of 4017 from mosfet driver is actually 49.5% and 50.5% since i am using small blue toroid(current sense) with 8 turns after the 3 turns from huge toroid(6mm sq) before the 0.47ufx2 Wima capacitor.The other i/c configured as divide by 3 with 50% duty 4xCLC previously shown in my youtube channel related to programming.This i/c no longer produce 50% duty if combined with current sense transformer.So in another words Akula is a smart guy.

I have attached the a pll image which previously i have made  modification for the pll circuit to work.
Only for the experienced just use LM393N portion an combine with current sense blue toroid with 8 turns combine with 74HC14.74HC2G14(SOT23-6).But i am not advising anyone to work on this pll circuit(Tested to be working after minor mod) since resonance isn't the key.

-------------------------
Tuning without HV enabled and w/o Grounding.I noticed that output from 26 turns on toroid is around 422Vpp at around 11khz near square wave with 100nf 2kv CBB cap.The kapanadze out is also connected to 100nf CBB capacitor.Variable supply settings 12.6volts at 1.9Amps.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #472 on: October 01, 2018, 03:02:53 PM »
Hi everyone,
Latest findings while fine tuning device..many preparation to do before lift off. :)
Previously i mentioned 4017/74HC4017 configured as divide by 3 for Akula device.But the duty cycle output from 4017 isn't 50% (It's more like around 65% ) even if a 50% duty signal is applied to 4017 clk input.
Today i discovered the output of 4017 from mosfet driver is actually 49.5% and 50.5% since i am using small blue toroid(current sense) with 8 turns after the 3 turns from huge toroid(6mm sq) before the 0.47ufx2 Wima capacitor.The other i/c configured as divide by 3 with 50% duty 4xCLC previously shown in my youtube channel related to programming.This i/c no longer produce 50% duty if combined with current sense transformer.So in another words Akula is a smart guy.

I have attached the a pll image which previously i have made  modification for the pll circuit to work.
Only for the experienced just use LM393N portion an combine with current sense blue toroid with 8 turns combine with 74HC14.74HC2G14(SOT23-6).But i am not advising anyone to work on this pll circuit(Tested to be working after minor mod) since resonance isn't the key.

-------------------------
Tuning without HV enabled and w/o Grounding.I noticed that output from 26 turns on toroid is around 422Vpp at around 11khz near square wave with 100nf 2kv CBB cap.The kapanadze out is also connected to 100nf CBB capacitor.Variable supply settings 12.6volts at 1.9Amps.
Hi Magpwr i'm not trying to be clever here but trying to clear my confusion, if my Tesla coil is tuned to, for the sake of argument 1.728mhz it will divide down to a 'base 8' Don Smith chose 31.5khz that's a base 8 and 9  ie base 9 3+1+5=9  the creator the universe, don't know if you know what i'm getting at here but 8 is the other energy that involves the earth..

Anyway the Akula Tesla coil or whatever you want to call it generates a sine wave so in effect if you follow that train of thought your pushing the static field then pulling it, How does that work ? so to get one polarity or the other you need a 10Kv full wave bridge, and if you want to use a spark gap or some other device you need a charge caps up to some sort of timing
looks complicated like a TV EHT fly back thus using the one haif wave to charge the cap and the other as the capacitor dis charge as per Don Smith and Mr TKap'zy.

Your thoughts please AG

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #473 on: October 01, 2018, 03:46:54 PM »
Hi Magpwr i'm not trying to be clever here but trying to clear my confusion, if my Tesla coil is tuned to, for the sake of argument 1.67mhz it will divide down to a 'base 8' Don Smith chose 31.5khz that's a base 8 and 9  ie base 9 3+1+5=9  the creator the universe, don't know if you know what i'm getting at here but 8 is the other energy.

Anyway the Akula Tesla coil or whatever you want to call it generates a sine wave so in efect if you follow that traion of thoght uour pushing the static field then pulling it, How does that work ? so to get one polarity or the other you need a 10Kv full wave bridge, and if you want to use a spark gap or some other device you need a charge capst up to some sort of timing
looks complicated like a TV EHT fly back.
Hi AlienGrey,
I can't advise much on Don-Smith.But the only thing i understand is the lower the number of turns like Don-smith the higher the input voltage we need to use like neon-transformer with spark gap.
--------------------Back to Kapanadze the last round around 1 year ago i was using 6x10nf Mica 1000volts rated after 3 turns from toroid combined with 4layers on the primary coil in order to get around 30khz at L/C resonance signal test.
But i overlooked impedance issue with low value capacitor since i was focused on resonance like the rest and but i was applying 1/3 resonance.The output is nice sine-wave at around 80khz if tuned right and it will stay that way even upon power on.
This time primary winding reduced to 2 layers on kapanadze and capacitor value increased to 0.47ufx2 parallel.

The output of kapanadze will look like this as attached without applying power to telsa coil at around 1.7Mhz.The probe used was x100 but settings was still at x10  re-attached corrected version.My scope is now running on battery power via pure sine-wave inverter after measuring power consumption at 230v outlet to be around 28watts.On 12v battery uses 2.7Amps with scope on.Saved money on portable isolated scope. :)
The device will start hissing once the tesla frequency is right at around 1.7Mhz and the test pen will glow at a distance from ferrite rod to Antenna at 12volts tesla coil supply interrupted pulse at 260ns(each pulse) at around 55us wide for now.

I am still tuning device at the moment  with tesla and can't advise much for now and starting to kill IGBT now even with lowered varistor rating 150v from 470v.



AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #474 on: October 02, 2018, 12:43:42 PM »
Yes  that is fast it's almost a |X10-9 a charged partials travel about 12" in that time, I made a PCB for that PLL circuit you published and i made it
I couldn't get it to be Equally Waited on the 4046 output gave up in the end and the pick up circuit was also crap, how have you got the decide by 3 etc
connected up ? one way would be to include a 4013 after the 4046.

AG

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #475 on: October 02, 2018, 02:39:31 PM »
Yes  that is fast it's almost a |X10-9 a charged partials travel about 12" in that time, I made a PCB for that PLL circuit you published and i made it
I couldn't get it to be Equally Waited on the 4046 output gave up in the end and the pick up circuit was also crap, how have you got the decide by 3 etc
connected up ? one way would be to include a 4013 after the 4046.

AG
hi AlienGrey,
That circuit was flawed which i have shown the amendment made merely at the front end LM393N.Take note of the suffix.


You will need to use small blue toroid which is large enough to go over the 3 turns.

I can't stop you for trying with 4046 pll.I run from this pll stuff if i were you. :)
I have attached a obsolete but working  PLL circuit which can lock onto L/C resonance(After 3 turns) between 17khz to 38khz  which was saved for my my reference.Phase shift using just 2 gates 74hc14 after LM393N was implemented in my current circuit.

------------------------------------------------------------------------------

The distorted waveform i have attached previously needs to be dancing or fluctuating constantly without the HV tesla powered on.
This i think will indicate  there is ionization happening at the kapanadze coil without tesla coil turned on.

This is just one of the key ingredient.

I just remembered to look for this effect which i forgotten to apply after the last Sunday experiment.
I will stick with battery like the last round.The mains powered scope is never the issue because not many ppl know the scope ground is also connected to scope earth.

-----------------------------------------------------------------------------

I may need to redo  the IGBT drive circuit using IR2113 like Akula circuit.But need time to do it on breadboard first.
------------------------------------------------------
I have attached image of the semi Tesla Coil then wind as semi Helix coil.Hint was given in Akula video or photo.


I have previously done experiment with full Helix coil which produce the highest current reading to Earth via clamp meter*Used as indicator but not accurate measurement.
Tesla Transponder 2.0 -Interrupter 1.7Mhz https://www.youtube.com/watch?v=Yun3HjsNNKs

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #476 on: October 02, 2018, 11:26:56 PM »
Do you mean this one ?  https://www.youtube.com/watch?v=PPHipGkfSAY



How many turns are under the blue tape ??????????????????

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #477 on: October 03, 2018, 01:29:09 AM »
Do you mean this one ?  https://www.youtube.com/watch?v=PPHipGkfSAY



How many turns are under the blue tape ??? ??? ??? ??? ??? ???


Hi Aliengrey,


The video about helix coil was posted in my youtube channel link as shown in previous post.Tesla transponder 1.7Mhz.


I can't recall how many turns left on tesla coil.But it's about the primary outer coil length at 4th top winding from the left.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #478 on: October 03, 2018, 12:16:12 PM »
Drawing shows grenade winding setup
 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #479 on: October 09, 2018, 09:29:10 PM »
Hi Wesley. For an alternative view regarding how ferrite or iron etc might be used to produce
free energy, you might be interested in George Bugh's ideas about Spin Waves. I don't necessarily
agree or disagree with his ideas, but I find them interesting. He is a very smart guy.

George J. Bugh Videos:

Spin Waves:
Overview_of_Spin_Wave_Technology_part_1
https://www.youtube.com/watch?v=VDEtPGB13NM
Overview_of_Spin_Wave_Technology_part_2
https://www.youtube.com/watch?v=EEMFqOvViDg
Overview_of_Spin_Wave_Technology_part_3
https://www.youtube.com/watch?v=Ge4Ni3ke2I8

Spin Wave Technology part 1
https://www.youtube.com/watch?v=ZkOuGRU8akA
Spin Wave Technology part 2
https://www.youtube.com/watch?v=HjsL1zfmKvA
Spin Wave Technology part 3
https://www.youtube.com/watch?v=craHcstJJZ0
Spin Wave Technology part 4
https://www.youtube.com/watch?v=izlcZPUMkdA

Gravity (I haven't watched these yet, just found them on his youtube channel):
Where Gravity Comes From, Part 1 of 3
https://www.youtube.com/watch?v=lB5qG5wHJ_s
Where gravity comes from part 2
https://www.youtube.com/watch?v=KSbG1vaxSWE
Where gravity comes from part 3
https://www.youtube.com/watch?v=J02-iLzjFbE

George J. Bugh Book (may not be currently available , goes into a bit more detail than his videos):
Spin Wave Technology
https://www.vasantcorporation.com/vc002.php

More Info on George J. Bugh and his Spin Waves ideas:
https://www.vasantcorporation.com/
Spin Waves in magnetic levitation and propulsion:
https://www.vasantcorporation.com/downloads/swt_magnetic_levitation.pdf