Thanks Wesley. This is strongly suggesting that Kapanadze as I previously suggested, is using the non metered grid neutral to his DIY earth ground 'common-mode' voltage, which could be quite high on a long single phase and heavily loaded grid supply line. Resonating transformer primary winding with pos to pos electrolytic cap pair low frequency AC working to produce HV in secondary. This explains the apparent simplicity of his box devices and erratic operation dependant on ground conductivity.
No my friend this only says that
physics: no static field can do the work.
At 1m from the ground the potential, is 100V, at 10 m it is 1000V
All you need is to amplify it.
Silly Example:
There is pretty young girl at the corner , she does not do anything . she is not performing any work but.... she is attracting other males and possibly some females.
That is your difference of potential. And the closer you are the more attracted you become.
It is nature that creates difference of potential.
Cold water pipe in 3D from the street has much bigger surface contact with Telluric current for that particular ground.
Now take another ground at the distance amplify it by means of high voltage transformer. In the right way at the right frequency and Yes... your current will be small but your spark will spark... creating Negative resistance of that small quiet plasma.
Do you remember spark of SR193? or green box?
to have it right way German guy used GDT. you did not pay attention to that did you? (Gas Discharge tube)
The German part of my video explains it all.
Look at German wording in my video showing in digits
800+% of gain. ( more explanation is needed)
I was explaining to you guys how electrostatic pump works.
The higher the voltage the bigger is ionization.
At one point he says that it works
like antenna system...
You guys fight with me when
I was talking a bout it asking me what antenna system has to do with it It does have: elevation , impedance match ionization at its capacitive character ( smith chart)
and negative impedance if you connect the spark gap.
Loop antenna can be capacitively having over 500V at regular few W Tx
And that what I did not explain in the video- is how to take advantage of higher elevation!!!
Sorry I can go only that far.
You can agree or disagree but the magician knows his tricks.
However it does not mean that trick is not
real....
.... but if you have leak in service electrical installation than it is even easier... You are not dependent as much on presence of Telluric current.
Gush.... think about small valve on the big water pipe connected to river water flow..
How much energy do you need to open it?
And how much energy you attracted and than let it go forward?
Wesley