Kapanadze and other FE discussion

[r2fpl]

Did you use the diodes in the way he tells us?  He says that the diodes are very, very important as they negate losses =  I speculate maybe negates Lenz?
Clearly, pulsed squarewave with variable duty cycles and frequencies is the experiment to be conducted here.
Also, use a magnetometer and see which frequency/duty cycle combination gives the biggest magnetic field.
Also, use very fast diodes. No two diode types are the same.
He also says that you can keep the transformer together by using ordinary cheap insulation tape.
I hope this helps.

Yes, I know that diodes only stop the LENZ very quickly! Ordinary diodes let through!

[r2fpl]

https://keelynet.wordpress.com/2008/12/20/daniel-dingel-water-powered-car-inventor-gets-20-years-for-swindling/

[Sergh]

r2fpl, Kapanadze in 2001 could not be connected in any way with the geographically remote Filipino Daniel Dingel, and these Tariel words about the theft of the principle of the device by the Filipino are the usual story that the secret of the invention is in danger and can be stolen, so he could not tell anything in detail. 

From antigravity to hydrogen? Is it the same?

Kapanadze says about gravity and antigravity research, but initially on this video says "Gravity forces":
https://www.youtube.com/watch?v=_BJnrlUbb58

But not Einstein, Dirac and Schrodenger's cat etc.
I assume that they studied the rise of groundwater in various types of soils and related topics. As a result, some material was probably found and a process was developed that made it possible to break the water molecule with little energy consumption.
Something along these lines:
https://openpress.usask.ca/soilscience/chapter/soil-physics/

Hydrogen bonding

Because of the polarity of a water molecule, the electronegatively charged oxygen atom can develop an attraction force with the electropositively charged hydrogen as two water molecules come close together. This attraction force creates an intermolecular bond known as hydrogen bond between the protons of the hydrogen atom of one water molecule and the oxygen atom of the other. This force of attraction effectively bonds water molecules together.

Adhesion and cohesion forces

Hydrogen bonds create two forces that are responsible for water retention and movement in soils (Figure 4.8a). The attraction force between water molecules and solid particles is known as force (force between two different materials). The attraction force between water molecules is known as force (force between similar materials). Generally, adhesion forces are much stronger than the cohesion forces as water molecules are tightly held onto the soil-solids (also known as adsorption). These tightly bound water molecules further hold onto other water molecules through cohesion forces. Together, the adhesion and cohesion forces make it possible for soil solids to hold water and to allow water movement through the soil. Increasing distance between the water molecule and the solid surface decreases the binding attraction between the water molecule and the solid surface, thus soil water farther away from soil colloids may not be retained onto the surface of a soil particle (e.g., clay).

Capillary rise

If a cylindrical glass tube is kept in contact with a liquid media such as water in a reservoir open to the atmosphere, water will spread over the inside wall of the glass tube. Due to the stronger adhesion force, the attraction between water molecules and the glass wall will be stronger than the cohesion force between the water molecules. Due to this attraction, the glass wall will “pull” water and there will be a rise of water within the glass tube. This is known as capillary rise (Figure 4.8b). The height of capillary rise of water will be determined by the closeness of the glass walls which creates the attraction force and holds the water against the force of gravity. If the walls are close (or the diameter of the tube is small), the adhesion force will be stronger than the cohesion force, and the water will rise higher. On the other hand, if the diameter of the tube is larger, the cohesion force may surpass the adhesion force and the height of rise of water may be small. Consider the situation in soil, where soil pores created by soil particles may be considered as a buddle of tubes. Now, small pores created by small sized particles (e.g., clay) will have a greater height of rise of water compared to the large pores created by the large sized particles (e.g., sand).

https://geo.libretexts.org/Bookshelves/Soil_Science/Digging_into_Canadian_Soils%3A_An_Introduction_to_Soil_Science/01%3A_Digging_In/1.04%3A_Soil_Physics

[pix]

Subject derailed into hydrogen and antigravity.
In Kapanadze device of interest I could only see wires, coils ect.

[r2fpl]

r2fpl, Kapanadze in 2001 could not be connected in any way with the geographically remote Filipino Daniel Dingel, and these Tariel words about the theft of the principle of the device by the Filipino are the usual story that the secret of the invention is in danger and can be stolen, so he could not tell anything in detail. 

I agree.

Kapanadze says about gravity and antigravity research, but initially on this video says "Gravity forces":

How to relate the gravity of a mechanical device to an electronic one with coils!?

[Sergh]

How to relate the gravity of a mechanical device to an electronic one with coils!?

In all his devices, Kapanadze uses the same process, but in different ways.
Such inventions do not come to mind in batches. Einstein did not create many theories to choose for everyone to find their own. This is impossible.

Compare the sound:

1. https://www.youtube.com/watch?v=Z4HCPrB-KB0

2. https://www.youtube.com/watch?v=X8hvZfw4Z7g

[r2fpl]

In all his devices, Kapanadze uses the same process, but in different ways.
Such inventions do not come to mind in batches. Einstein did not create many theories to choose for everyone to find their own. This is impossible.

Compare the sound:

1. https://www.youtube.com/watch?v=Z4HCPrB-KB0

2. https://www.youtube.com/watch?v=X8hvZfw4Z7g

An interesting comparison, especially since Kapanadze showed a pressure device. This sound is not related to the generation of electricity, but to the movement of the discs! Why ...
See this trag: https://youtu.be/Z4HCPrB-KB0?t=657   (turn the sound full up)
At this point, the device is running already generating FE. Only the moment of switching on the transformer can be heard - the impact of the magnetic field.

[Sergh]

See this trag: https://youtu.be/Z4HCPrB-KB0?t=657   (turn the sound full up)

To demonstrate starting from a small battery, they use a "GreenBox" or "Aquarium" type device as a starter battery to start a "20 kW Hydraulic Generator" type device.
Kapanadze's "Hydraulic Generator" devices cannot be started directly from a small battery. In other videos, to start devices like "Hydraulic generator" without the use of an additional starter device, they use a temporary connection to the 220 volt network.

At this point, the device is running already generating FE. Only the moment of switching on the transformer can be heard - the impact of the magnetic field.

Other things can be heard, for example, the initialization of the vibration of the power cells in the coil.https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg576630/#msg576630

[endlessoceans]

To demonstrate starting from a small battery, they use a "GreenBox" or "Aquarium" type device as a starter battery to start a "20 kW Hydraulic Generator" type device.
Kapanadze's "Hydraulic Generator" devices cannot be started directly from a small battery. In other videos, to start devices like "Hydraulic generator" without the use of an additional starter device, they use a temporary connection to the 220 volt network.Other things can be heard, for example, the initialization of the vibration of the power cells in the coil.https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg576630/#msg576630

Its all fascinating on multiple levels

Here is another time it was on German TV with different angles

Kapanadze is either doing a total deception with the toroid fixed to the shaft (which he always removes for security and breaks the device into its components) or this is a real necessity.  IF SO, there are zero volts (with a conventional multimeter) read off the toroid but that wiring leads into the mystery aquarium.  There is a VERY high chance that this is different superluminal energy and what in the tank is essentially his converting  rectifier.

He guards that tank totally and its blocked out.   He happily shows everything else which indicates he thinks the rest of the components in view are less than 5% of the device and nobody can reverse engineer anything.

https://www.google.com/search?q=kapanadze+spinning+discs+free+energy&ei=So8_ZJi5J4-2oATM57WwCg&ved=0ahUKEwiYhtPBrbX-AhUPG4gKHcxzDaYQ4dUDCA8&uact=5&oq=kapanadze+spinning+discs+free+energy&gs_lcp=Cgxnd3Mtd2l6LXNlcnAQAzIFCCEQoAEyBQghEKABOgQIIRAVOgcIIRCgARAKSgQIQRgBUPQFWNMgYJskaAFwAHgAgAHyAogB5iOSAQYyLTEuMTOYAQCgAQHAAQE&sclient=gws-wiz-serp#fpstate=ive&vld=cid:9a8ab641,vid:3thvqFhFIfY

[r2fpl]

Sergh: The magnetic separator is available in few versions.

The toroid can rotate with the magnet inside if it is a coil and if the magnet is diametrically magnetized.

I don't know what these discs are for, but THIS is coming out of the box. Just like with Green Box

[Sergh]

The toroid can rotate with the magnet inside if it is a coil and if the magnet is diametrically magnetized.

Do you, as an electrical engineer, seriously assume that the shaft, due to the force from this toroid, can rotate a 20 kilowatt generator under load?  Even if the toroid somehow magically spins the axle, it will start to spin in the opposite direction and break the wires, as it is not properly fixed to the frame. In my vision, this can be only a sensor of rotation speed, or mystification of observers. 

I don't know what these discs are for, but THIS is coming out of the box. Just like with Green Box

The discs are located on the axle shafts, between which there is a wooden insert, on which the spring is wound.

This is a mechanical damper to reduce vibration from hydraulic motors and hydraulic pumps. Construction foam on the walls is also for similar purposes.
Hydraulic motors and hydraulic pumps have problems with rotational vibrations on the shaft.
The hydraulic pump or hydraulic motor is usually connected with an elastic coupling.
In addition, hydraulic motors can have a large torque. Because of this, the drive belt to electric generator may break  during acceleration.
To exclude this, a spring is wound on a wooden shaft between the disks.
Although such a system with two flywheels can purposefully multiply pressure vibrations in the hydraulic line. Maybe this is the reason for obtaining free energy in a certain substance.

[r2fpl]

Sergh: I agree with you that the toroid cannot be responsible for the movement of the shaft. I just wanted to show how it should work, if it can be taken seriously at all.
Does the toroid detect the position of the shaft? there is such a possibility.

Is there a pressurized system? I never thought about it, but your observation gives me a different perspective on this device. Thank you.

photo: Someone once wrote that in this device she saw something similar to a water pump. hmm...

[kolbacict]

Well. I see. Without me, you'll never figure this device out.
Делайте мне уже докУменты,и отправляйте в командировку.

By the way, there was no answer what the readings of the hydrogen sensor on the arduino mean.

[Sergh]

An interesting feature of these pumps. They vibrate very strongly if the outlet water pressure is lower than the pump is set at the factory.
This is because the core that drives the piston hits the core of the electromagnet.
  Usually they are adjusted with a spacer washer to a pressure above 6 atmospheres for pumping water from a wery deep well.
When the pump reaches the required pressure, it runs relatively quietly.
Compare sound:

https://www.youtube.com/shorts/I4a58Wpkue4

https://www.youtube.com/watch?v=0Z3S4R_wycU

[r2fpl]

it was supposed to be the pump. (red box)

An interesting feature of these pumps. They vibrate very strongly if the outlet water pressure is lower than the pump is set at the factory.
This is because the core that drives the piston hits the core of the electromagnet.
  Usually they are adjusted with a spacer washer to a pressure above 6 atmospheres for pumping water from a wery deep well.
When the pump reaches the required pressure, it runs relatively quietly.
Compare sound:

https://www.youtube.com/shorts/I4a58Wpkue4

https://www.youtube.com/watch?v=0Z3S4R_wycU

You're right, but that would mean there's water or oil in the box  This is crazy
but maybe it's a mini pressurized system.