Wesley's Kapanadze and other FE discussion forum

[mkjekyll]

Microwave has been known for wireless charging way of rectenna for years, just keep the beam width tight but it is still lossy except for near field loose coupled resonance, if one can parallel keep high Q and get eventual gain but major pain.  There are more tricks of the trade like anything but for a drone is not efficient use of energy.

Wesley I was interested in which you reach for more often impedance or VNA, just curiosity and in the case of the impedance analyzer how do the in and output impedance work if not limited to 75 ohm coupling, I have never used.

I can do quite a bit with VTVM bare bones so yeah I know I don't need this gear and already have some good stuff for my audio business so may not bother.   Just would be cool to have some RF gear to help with antenna design.

Thanks again

[stivep]

OK  I knew something is fishy here.
I did not check their  Russian patent on it.
But in Russia <"everything is possible.">


Let's go to: https://www.youtube.com/watch?time_continue=4&v=A58auF2dhCQ
The interview  is with : Leonid Plekhanov CEO of Global Energy Transmission (GET corp since April 2015.) established in  2015.
But patent application  is filed as company ( not as corporation,)  with 2 years later date. 03 17 2017.
So it looks like These Russians,  did not close their company,prior to opening corporation
and in USA company  can be you, and you, can be company.
Company is your "second last name" if you will.

So  that Patent Application  is not property of corporation unless stated.
However  company and corporation  can be  operated by the same people
and they can do changes   any time, all the time. And Russians  do it  all the  time on  our land.
So  when contracts are  signed with corporation , than any client and/or party is at risk.
Corporation  has no money, no patent and can be  closed if needed.
Clever Trick.


OK so  they do not have AMERICAN PATENT.
But hey ..money can not wait.
That is somehow quite normal practice that production starts and it says patent pending on the product.
However patent pending was not printed on the product.
That means  production did not start yet.
Show was needed to attract investors and clients.
The  filming entity  doing that interview makes money from publishing  it in  their youtube.
So the entity is paid by  interested party to do it.
I know them for the long time.

Go here.:
So many other guys did the same:
typically bunch of these film guys are cruising  between the bots
offering their services  for $100 or  so.

https://www.youtube.com/channel/UC_9zn1vg6UbvFmJHj50bUcg/videos
Publisher had  only 20,224 views for all of their videos for all of this years.
Video generated only 83 views since published on Jan 21, 2019.



So the hero based on his  interview  has quantum physics background from the Moscow high school  of Quantum  Physics  and Electronics.
and his brother  has got the same.
That is why they are  so good with quantum physics .

However in other piece of paper they are shown as highly educated Moscow

Moscow Institute of Physics and Technology (MIPT) in 2005
(Department of Physics and Quantum Electronics),
Master of Science in applied physics and mathematics.  and  so on.

Compared :  video testimony and  this link:
http://getcorp.com/get-introduction/team/


It "looks like" they have got an investor: William R. Kallman — US Director, Partner since June 26, 2017.

Twenty five years experience in technology ventures as founder, executive, CEO, board member, chairman,
and venture capitalist with the Draper Network.

Draper Network means he pays for membership.
 He is a Partner at Timberline Venture Partners. ( some , venture capitalist group)
Managing Partner of Timberline Fund I, L.P. -
(another entity managing money  in case the first one got problems  so the money is safe.)

Traditionally Venture capitalist acts like a butcher.

Venture capital firms or funds invest in these early-stage companies in exchange for equity, or an ownership stake,

https://en.wikipedia.org/wiki/Venture_capital
 
The idea is brilliant:
1.You need several kW  preferably 3 phase  delivered to  charging device
2.Drones can be always in air .
3. Drones must be inside the loop of ~5 to 10m( 15ft to 30ft. )
4. Distance between separate loop antennas  can be 1 mile apart.

Drone must be inside of the loop for 8 minutes and that charges  battery of drone  for another 20+  minutes  ( minus 8 minutes for charging)

But  this is  old loop charging known for  over 70 years
Do you remember loop  under the carpet? Or you didn't play with it   in your young years .
I did.
If these guys get American patent in our American system, it will be just something that
is theoretically possible,  but unlikely real.
But   Russians  can try..This is free country after all.
They can also try with FCC..This is free country after all.

Literature:
https://thetechranch.com/global-energy-transmission-provides-ultimate-solution-for-infinite-drone-flight/
http://www.freepatentsonline.com/y2017/0271925.html
https://patents.google.com/patent/US20170271925A1/en
https://patentimages.storage.googleapis.com/ba/95/34/16c08cb522ba87/US20170271925A1.pdf
 
Wesley

[stivep]

Step1 measuring of real  structure  of Tesla   coil with VNA

We have been talking  about VNA and NA
That gives you Smith Chart  as a tool to see  everything you need
in all ranges of frequencies.

I did not use simulation in my  professional life.
I do have  comfort  of playing with  parameters in real life
based on real structure.

But if you need it than you can see  what would be your outcome
without building  a device.
So for possibly few of you including mkjekyll
This video will be   delicious.
For me it was great entertainment.
It tells you  how to use Smith Chart  but now in 3D,
and what can  you  expect  from:
1.your amplifier ( signal of generator is amplified)
2. impedance matching network
3. your resonance circuit  Tesla coil)
You  can easy without  HV find exact frequency of the signal at the load that matches impedance of  dynamic load
However  we are dealing with purely resistive loads  so you  can connect variable resistor of low power instead of lightbulb   
to find  what resistance gives you the most power out ( dissipated at load).

If you do not have  purely resistive value of your load  than you will see,
what should be  desired load resistive or complex impedance dynamic value.
Network Vector analyzer can do the job for you in given frequency range
Just in  one single measurement when dealing  with resonance  circuits.
However there is  some thing  you must remember.

In transformers such as Tesla coil you have presence of HV so you need attenuation
on HV  side before you connect VNA or your VNA  is done for good.

https://www.youtube.com/watch?v=RDJpXUfDVDE
Designing a Broadband Amplifier with a 3D Smith Chart

Now how to get the cheapest RF High Power generator in frequency range of 10Hz  to 50kHz or even more.
Car  audio amplifier with  load at the output  in form of antenna.
Such as  primary coil of Tesla coil.
However we dealing with impedance match ( point )
Output of amplifier is 4 to 8 ohm.
and vector network analyzer can analyze this particular coil
for its impedance  value that must be close to say  8 Ohm
in that given frequency range.


Wesley
 

[stivep]

step 2. measuring of real
Tesla  coil structure with VNA
Original link:
_{https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/dlattach/attach/172114/image//
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg531984/#msg531984}

Wesley

[stivep]

 step 3 - 3aa. measuring of real
Tesla  coil structure with VNA

Literature:
page 3-9
page 3-10
https://www.advantest.com/documents/11348/146687/pdf_mn_ER3754_user_MANUAL.pdf
So one simple measurement and you know everything about   it.
It'll save you days of work .
So is it that simple?
Yes and no.
It is  simple but there are some variables that can not be solved by use of VNA.
_{example: your load ( output) is measured as if it was 50 ohm.
So you can connect in real  test few lightbulbs in series to compensate for 50 ohm.}
And that's another discussion.

Wesley

_{Original link:
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/dlattach/attach/172114/image//
https://overunity.com/17735/wesleys-kapanadze-and-other-fe-discussion-forum/msg531984/#msg531984}

[stivep]

step 3.aaa measuring of real
Tesla  coil structure with VNA
<sub>Note: Attenuator is needed , but:
a. it is good to measure output voltage of your VNA
    or check what is the voltage it in manual.
b. Than prior to use VNA, connect tracking generator from your spectrum analyzer  or any sweep generator
    to primary of Tesla coil and at secondary connect your oscilloscope.
c. find frequency that has maximum amplitude on your oscilloscope.

d. based on this measurement you will know already  a lot about  your Tesla coil and you may not need  VNA.
    Voltage present in secondary of  Tesla coil will allow you to  get proper  attenuation required  by manual of your VNA. 
e. generator of  your working prototype should be tuned to red region of frequency generation</sub>
 
Wesley

[stivep]

Note:
Some posts  are deleted without notice
_{e.g 1:
spammers or people who spam or people who did it ,in the past are ask to ignore this
part of forum.
Record  of  spamming that includes  name of spammer, can be published if needed.
e.g 2: the user name is not published yet.} 

Wesley

[stivep]

VNA

Some  of the VNA have been made for production line of X-tal
crystal oscillators.
And they have build in more tools to
measure  resonators and  resonating  circuits.

Tesla coil is:
- air transformer
- resonant transformer
- can act as filter

Assembly made of coils and capacitors can be treated as  one DUT
(Device Under Test )with single input and output.example of possible measurements is listed below:

Conclusion.
That what was taking months  and years now can be done in few minutes.
Most of you are happened to dig in the dark  for years, and VNA is your pair of glasses.
But you need some flashlight too.
I do really try, to provide it for you guys

Device made by you,  has one purpose, and that is Electrical Energy for Free
Such  a devices are exotic as:
 - scientific base of energy origin is questionable.
_{Note:Wesley provided  explanation, in this  part of forum.}
 - prior art  exists  mostly in form of unexplained pieces of information
 - any device that is made for any purpose must be replicable (able to be copied or reproduced exactly.)

_{Note: on the picture below
  -any time crystal resonator is used for our purpose you can use word  filter
   and Tesla Coil can  be our filter .
  That will analyzed in  next  post.}

[stivep]

I didn't know that anyone was interested with it that much.
https://youtu.be/W4GS1AAmGLo
Some people  published that what  they thought was important to them about
history of my trip to Tariel Kapanadze.
That includes history of  attempted
assassination, and my  first reaction to it .
Wesley

[mkjekyll]

Wesley,

Yes yes the VNA is better than graph paper and a a scope and mush guessing in the dark from all the interactions of RF.  OK I ordered old HP for few hundred bucks, hope it gets here and works, of course it will not be aligned so next I must ask do you think it is necessary to have the alignment kit or to just to rent ?   This unit supposedly goes from DC to 2 gHz and i don't plane on working more than a few mHz aside from that old 300 mHz battery we discussed if I ever get back to it.

Also a large expense are the probes, what does one need to work up to a few mHz besides some very good coax and connectors for the DUT?  I have heard that using the BNC to SMA adapters and some premade SMA cables can work pretty well, your thoughts?

Thanks,
Mick

[mkjekyll]

Wesley,
As always digesting the very good info you post and the Smith tube video is super cool!   Thanks for all the charts and explanations.

Hey someone obviously wants you around.

Can I ask what it was you did in professional life, or is this too personal? 

Thanks again,
Mick

[stivep]

Thank you for kind words.
Before you pay for VNA or NA.
some pros and cones.

https://www.youtube.com/watch?v=LN9PKKdFibo
note:
-Calibration kit can be any.
-look  at second picture.


some additional literature:
http://www.rfwireless-world.com/Terminology/S-Parameters-Scattering-parameter.html
http://www.antenna-theory.com/definitions/sparameters.php

Question is:
Do you need S parameter?
No you do not need S parameter but is good to have it.
And that  gives you a lot of room to hunt for used VNA or NA that is  not compromised  like  VNA from video.

 
Wesley

[lancaIV]

Remote energy transmission, either thanks to the near field at a short distance that does not greatly exceed the size of the resonant system, or at a long distance by radiowaves beams or light beams, are conventional techniques known since the beginning of the 20th century.
Their efficiency is poor, and implementation is difficult, especially for powering mobile equipment, which is why the industry has made little use of them so far.
It has nothing to do with free energy.

Do somebody think that this kind of science results are unused or not improved since these papers/ knowledge publication worldwide ?

https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=Dd&AP=&PR=&PD=&PA=Manfred+gregor&IN=&CPC=&IC=&Submit=Search
F.e. un-/ visible light beams in Terra-/Giga-Watt range( per sqcm)

For example for lunar/orbital/astral "Solar Farming" and 24/365 to earth transmission.
Or as Fusion reactor beam.
Or as welder.
Or for tunnel/channel construction ( stone/rock melting)

Similar research :
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=Winfield+salisbury&CPC=&IC=
East-/West-world comparison, completing and improving

As "13 years old boy/girl " you can soon begin to change your world  like he did :
https://translate.google.com/translate?hl=de&sl=de&tl=en&u=https%3A%2F%2Fde.m.wikipedia.org%2Fwiki%2FSebastian_Ziani_de_Ferranti
Age in numbers does not indicate intelligence or wisdome.

[stivep]

lancaIV  I do thank you for your post very much;

From theoretical stand point:
1. I have solid argument  Viziv  with their billions dollars of investment and solid surface wave theory.
    We Americans and entire Western World - we do not waste  such money if we aren't  sure it works.

2. My opponents  they have nothing in hands, some old isolated phrases cut out of my posts  and comments.
    I would love to have someone who  presents himself as  valuable, credible,  independent  opposition.

3. Surface wave theory  was academically and practically  proven to work.
I may comment more in my next post.

Wesley

[forest]

I agree Zenneck waves exists but misconception is it's radio waves.
Tesla knew about theoretical explanation of this kind of waves and this is what
we should investigate first. However the notion that it's an explanation of free energy is far from truth.
Free energy is much more simple.