Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1131648 times)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2265 on: October 14, 2022, 10:54:26 PM »
ADRIAN MARSH, PhD he was a guest of
2022 ENERGY SCIENCE & TECHNOLOGY CONFERENCE PRESENTATIONS
organized by
Aaron Murakami and Eric Dollard
I was thinking to go there few years ago .


https://www.youtube.com/watch?v=k5raG28xqDs
biography:
Adrian Marsh  PhD
1980s  electronic engineer specializing in RF, microwave, and solid state technologies
-wave astronomical applications, properties of the high-gain cross-field antenna.
measurement ,  network and impedance analysis, RF power measurement, and time-domain reflectometry.
 1990s  Microelectronics Research Centre, at the Cavendish Laboratory, Cambridge University cryogenic linear amplifiers
for satellite and astronomical applications.  hall effect, ballistic coherent electron conduction, nano-scale charging
superconductor-semiconductor junctions;  superconducting transistor,  patents on superconductor-semiconductor
junction to high-speed computing and communications.

 1999 Adrian  the work of Tesla, Eric Dollard, and Edwin Gray,
 2003 his own self-funded, not-for-profit, research company called AMInnovations,
 research activity: “Displacement and Transference of Electric Power”. 
 relationship between the electric and magnetic fields of induction, and their balance and equilibrium throughout the common medium.
Displacement of electric power,


PRESENTATION: ADVANCED MEASUREMENT TECHNIQUES FOR TESLA COILS –
Building, operating, and optimising a working Tesla magnifying transmitter (TMT)
power transmission system for the maximum transfer of electric power with minimum loss,
 Detailed measurement, tuning, and accurate generator and load matching.
Measurement of such a TMT system in the frequency domain, using affordable  vector network analyzer, 

 a practical demonstration,   and  the small signal impedance characteristics with frequency for a Tesla coil,
and hence for a complete working TMT system. The presentation and demonstration includes:
1. An introduction to the basic principles of network analysis.
2. An introduction to the basic properties of Tesla coils, including resonance, coupling, tuning, and matching generators and loads.
3. Taking a look at equipment suited to this measurement technique both at the high-end, and the
    affordable end, with a comparison of the range of measurements available from both, and the likely accuracy and limitations which they present.
4. How to calibrate, setup, and prepare a network analyser to measure a Tesla coil.
5. How to make impedance measurements over a frequency band, and interpret the meaning of the measured results.
6. Impedance measurement comparison under different operating conditions, including the effects of coupling, primary and secondary coil tuning, and loading.
7. How to identify the best points of operation from the measurements, and then optimize the system for the maximum transference of electric power.
8. How to match a generator to a Tesla coil using the measured impedance characteristics.
9. A live measurement demonstration using the complete transmitter coil from a working TMT system, and connected to a portable and affordable VNA
complete biography is  here:
https://energyscienceconference.com/2020-speakers/
_______________________________________________________________


Adrian Marsh  PhD
YouTube:
https://www.youtube.com/channel/UCTxU51o4RL3R0rb4mpvpEMg/videos

YouTube from conference was posted as preview
https://www.youtube.com/watch?v=gTGqEH7gCgs
to watch full video you need to pay for it.

example of video from his YouTube, channel:
https://youtu.be/25C-bHBdF34?t=1732

pros and cons:
the gentleman seems to be quite knowledgeable  spent a vast amount of time to make quite nice presentations

cons:
however my first impression was blown by him using a term
"magnito -dielectric longitudinal mode."

What the heck is that?
absolutely insane but this is my opinion.
what kind of quirky science is that? ??? ??? ??? ??? ?

cons:
although he is experienced ham radio operator, and  PhD
The two of his video books are in their full version
Available only if you pay for it around  $50+ each.you can buy it from Aaron Murakami .


Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2266 on: October 15, 2022, 06:27:46 PM »
Continuation from the post from above.

________________________________________________

Now lets analyze  ingenuousness of "genius" Adrian Marsh  PhD and  Erick Dollard the icon of energy for free research.
Some history  first:
it looks like Our PhD "hero" is supporting Eric Dollard with his:
longitudinal magneto-dielectric (LMD) transmission mode .
and  for some of you it may look like  quirky or possibly "quacky ."
________________________________________________

Motivation:

-Adrian Marsh  PhD is a businessman, promoting something.
-Erick Dollard
is widely recognized "holy cow"   the symbol for all of us.
 Despite of what he says, and how much craziness we might see from him, we tend to  forgive it.
 I completely disagree with many of Erick Dollard statements, but I respect him very much.
 e.g he's like if we were to look at the  Statue of Liberty We may don't like the material, the color the size, but it is a symbol.
 -innocent and great although not perfect.
________________________________________________

evaluation possible errors if any:
Adrian Marsh  PhD looks like  he is the key to "holy grill of energy for free"
although for some of you it doesn't look like and he supports  it as much as he is able to. But as  a businessman, he wants to make a buck on it,
so he doesn't give you something like IKEA bookshelf
that you can put it together and enjoy it.
Wesley: I am also not perfect and not free from errors but I  look at him from the perspective of fundamental science physics and electronics with willingness
- to look at both of the gentleman revelations fair enough.

________________________________________________

what is it about:
Every American in New York receives two bills for electricity
-one for delivery and - the other one for usage, were usually
delivery bill is higher. If someone were to eliminate the last one
he will become crazy wealthy or at least financially independent for life.
Promoted by  me Dr. James Corum (Viziv) EM wave  in the Earth/Air interface
as energy carrier is the key to success.
Adrian Marsh  PhD claims delivers promise and very accurate
 instruction
how to  tune Tesla coil  impedance to maximum
of power transfer. If it works it gives regular citizen a complete guidance
of how it works and how to do it in your backyard.

How to make a money on it:
Electricity can be purchased by you for much less as a bundle .
First few of your clients covers your own delivery cost while paying much less now.
Your delivery cost to your clients is close to zero, !!.
Example:
5 miles from Niagara Falls, energy delivery is $10
Your clients much far away usually pay for energy delivery bill $180
So in theory every client brings you $170 gross, but you decided
that you would be happy to charge them only $60 making them happy as well.
However if you were to use energy extraction from Schumann waveguide
then all of that energy is for free.
it will become like another Niagara Falls, paid one time for the devices
and now the only cost is  the maintenance.
look at this video only for ~two minutes:
https://youtu.be/k5raG28xqDs?t=69
________________________________________________

the video:
first look at:
https://www.youtube.com/watch?v=k5raG28xqDs that is chopped and full version of it
you may get if you pay for it to nonprofit organization run by  Aaron Murakami, that organizes every year
energy for free conference in  Spokane, Washington Washington State USA.
https://aaronmurakami.com/biography/
 then you look at:
http://vinyasi.info/circuitjs1/graphs/two-lmds-shorted.cmf_.htmlIt is followed by simulation:
http://vinyasi.info/circuitjs1/graphs/two-lmds-batt.txt_.html
then you look at:
https://youtu.be/fneUVW0RXec?t=65
Parametric Oscillator
then you look at:
https://en.wikipedia.org/wiki/Parametric_oscillator

The cost of VNA can be $90 for VNA nano. but more sophisticated one is  ~$2000+

Wesley

 


 
« Last Edit: February 28, 2023, 09:51:50 PM by stivep »

magnetstoo

  • Newbie
  • *
  • Posts: 27
47MHz to 65MHz
« Reply #2267 on: November 01, 2022, 08:30:57 AM »
Mr. Wesley... Im including a schematic of the 24v .25a 52MHz system I built, that,somehow, took out my PCSU1000 scope,USB mouse,instantly shut the computer down,and popped the SBB5089 input FET of the (now 1watt) 4w 50MHz to 1.1GHz Linear Amp.
Took me 30+ hours to restore the computer with a different board but the wrest was trashed.Im trying to get the Linear amp up and going again.In my area the frequency seems to be in the +/- 53MHz range of the background.I have no scope now to test my amp..Im trying to use an NE72084 GaAs FET for the front-end as a replacement as I have several.
  The Linear amp -off Ebay-was a 4 watt,50 MHz to 1.1 GHz 36 Dbm used for digital TV,But I blew out the 4 watt SM6S4 and replaced it with a 1 watt IRFDZ13.Somehow,when I turned on the VARIAC which was set at 0% a surge took place in the system and did all that damage. I make these schems for my own research.I thought you guys might
have an interest or similar experience.This is more in line with Don Smiths suitcase device and other work.Perhaps Akula and some of his devices.

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: 47MHz to 65MHz
« Reply #2268 on: November 01, 2022, 04:55:59 PM »
I thought you guys might
have an interest or similar experience.
I had something same once.  For some reason, my device went into disarray, broke,fire for a reason that is still not clear to me. But it was a completely different device, an oscillatory circuit with parametric oscillation excitation. By means of capacitors switched by means of mechanical relays.
That is, there was a complete decoupling of the power circuit from the control circuits, all the more it is not clear how this could happen.It was many years ago, but still haunts. :)

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2269 on: November 01, 2022, 11:07:55 PM »
   I took some screen shots from the video and included comments--hope they are readable.I ordered 2 more PCSU1000 for 190$US each..
What I read they are being discontinued..the new model does not do the 250+ MHZ range,but it includes the signal generator within.
Im getting them from EIO electronics.Some wanted 340$US each.There are smaller units,handheld, with the LCD flat screen but like the "Tiny Spectrum Analyzer" and "Tiny Vector Analyzer" Im sure the screen update is waaaaay too slow.Im lucky I did not have a more expensive  scope.These PC units can be sacrificed if need be, and the PC repaired.The Lithuania experiment---you advised not to hook directly to the output but use a HV probe--this unit does not use HV,nor should it spark,but I cannot rule out it may have, somewhere...I also find that HV and HF have very similar characteristics that they "migrate" and "penetrate." I do not know what happened but I am looking over the data carefully, obviously to not take out more equipment...The "1.2uH can" is a small adjustable IF can used in early radios,the back side (with blue insulation tape) can be seen in the picture of the Lin amp.----I forgot to mention that when the PC (running win ME) shut down and I restarted it later,it would still run fine except the USB ports-all of them,would not recognize anything.The Hdwr section also showed no problems.I looked through my stuff and found some boards and sorting proceeded to rebuild---also the Hard drive was still fine . But the new board just proved the PCSU1000 was dead and the USB mouse was dead.More investigation showed the Linear Amp front end had died also.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2270 on: November 02, 2022, 10:46:33 PM »
  After viewing the video, this schematic shows what I found to the best of my knowledge.I included the part# of the "Signal Transformer" and any pertinent info.I hope Im not chasing down a rabbit hole again or sending anyone else.Don Smith taught over in Europe and Asia after being rejected in the USA with his patents.I keep wondering if Terial Kapanadze was inspired at any point or if he even knew of Don Smith.Im still waiting for parts to come in so I can continue.The 4w Linear Amp (no brand name) came from EBAY for 88$ US out of China--took about 1 week.
  My work bench is a non-insulated wooden table which also lends to hv migration.I believe also the GND system had a lot to contribute,not that its poor but its a separate system.The ext. gnd uses a 60ft silver coated multi-strand 00 wire attached to a 4ft x 3/4" copper water pipe hammered into the ground next to the house.Also,the scope Probe was not even connected,just its GND..The probe end was sitting near the Trfmr.Also,the computer would not turn back on,even after I shut the VARIAC off.Only when the amp was turned of did it start back up and I found the USB ports dead..So I suspect the whole Gnd system was modified somehow.The computer is an old Windows ME Celeron 2.8 Ghz (it was,now its a 2.2 GHz Celeron)   that wont give up.The Vector Vid power supply was not affected at all.....This is all I can tell you because there is no more.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2271 on: November 04, 2022, 05:57:23 AM »
  Short update....the VARIAC, when I turn it on (set at 0%),I notice it sends out a single pulse into the transformer,probably due to the in-rush of voltage/current.This pulse varied in freq. but
I notice one was in the 44MHz-48MHz range (pulse too short to capture),some higher.So it must have pulsed at ~44MHz and started that avalanche...I also notice on my secondary 20MHz TENMA Palmscope, that ~18MHz is a more pronounced frequency and the 44.7 MHz,,,plus others,,, are buried in between these pulses....My conclusion is the ext GND was modified and caused all this that was connected  to it.--which interests me more, now that I know what to look for.
      If you have a 20 MHz scope with a zoom capability,look in the 50nS range,you may be able to measure up to 100MHz.They are at very small voltages.My house is presently at +3v 60Hz (voltage varies with day & weather) just sitting on stuff...That kind of voltage is not coming from a 120v 60Hz source.My house is also about 1/2 km from a small power station  and 3/4 km from overhead high tension lines.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2272 on: November 06, 2022, 06:13:50 PM »
  Here's the video if interested   https://www.youtube.com/watch?v=lyrFFk7P0v4  some cussing at the end,,sorry for that..

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2273 on: November 14, 2022, 09:11:12 PM »
EIO.com now informs me they do not have any PCSU1000 but are contacting the manufacturer (for a discontinued product? !!)--I ask "why advertise?"
 I  find my ext gnd. is sitting at 330mvDC relative to the electrical ground,the wire measures 3.3M ohms and has at least a 180kHz frequency.
I have not been able to recreate  the surge or whatever you can call it.
I have repaired the 24v 5watt linear amp (scavage-ing parts from a 1watt amp)and running it at or near where it avalanched but the resonant frequency is now only at 41MHz to 42 MHz...not 44MHz or 52MHz? (where the bulb lit).I may have to buy another 5w amp or bigger. Here is another schematic that I made trying to make sense of this.
  I did find,when it is resonating,the transformer core ,the linear amp body (=24v power gnd),and the outside ext. gnd. all rose to .5v to 1v depending on the tuning.So I did have a positive voltage feeding back into the ground of the scope at some unknown freq.

magnetstoo

  • Newbie
  • *
  • Posts: 27
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2274 on: November 17, 2022, 06:34:39 AM »
 -This system had 60v-90v out of it to the bulb, though at a low current, I seen this when the  o-scope was working...  Well, my present idea on what happened was an oscillation got set up in the 10:1 transformer ,perhaps the VARIAC too,and then resonated into the 120v coil --this caused the 12v side to go to possibly 900v.Best  guess it is.I have had that OSC take high voltage surges and the most it would do was hang and tell me the USB could not be found...always a USB issue.That O-scope did not like static electricity.Ive had static settle on my table and it then took over the keyboard..opening windows,menus,programs,occasionally shutting down.... But I do not remember,a flat, shut OFF.I could not get that system to do it again.So Im now shoving--at 50MHz-70MHz-12v into a micro-wave trfmr using a different Linear amp and a bi-fi 38g antennae coil as pickup..,because my 30v amp got shorted out again and I do not have anymore spare parts.Brightness looks about the same as with  the disaster bulb but Its costing 11v @ 1.6a input to get it.....No VARIAC here.Variac was used to try and add a 60Hz to the 50MHz.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2275 on: November 22, 2022, 03:21:54 PM »
Quote
I saw you mentioned :
The cost of VNA can be $90 for VNA nano. but more sophisticated one is  ~$2000+
I could not agree more
But I also found out that the nano is not as stable as I would have it, especially when measuring inductance and impedance 
low resistance (50 - 1.5 mOhm) csr / shunts in "shunt thru" mode.
So I am looking for a more sophisticated VNA.
I have set my mind on an HP 8753E as I understand that still is a very sophisticated and stable piece of equipment.
I saw you have such an HP 8753, so I wonder what you think of it and if you can recommend that type.

I have many vector network analyzers, and someone would be very surprised
that I prefer 40 years old HP 4194A that is just Impedance/Gain-Phase Analyzer,
https://www.testequipmentdepot.com/usedequipment/hewlettpackard/impedanceanalyzers/4194a.htm

In the world of science, it doesn't matter how old is the instrument, the most important is how it functions and what it does.
I have in my lab few over 100 years old devices that would never sell.
_________________________________________________________

From a practical standpoint:
R3754B Advantest  https://testequipment.center/Products/Advantest-R3754B

]application is important:[/b]
Specifications:
Frequency Accuracy: 0.0005%
Frequency Range: 10 kHz - 150 MHz
Output Impedance: 50 ohms
Output Power Range: 0.0005 mW - 125.89 mW
Sweep Range: 0.1dB

it is extremely fast and it starts from 10 kHz , - that is your statue of limitation for the lower range.
And in my application Zenneck Wave,  the frequency of interest is 18 kHz and lower.
-the upper range is 150 MHz which is for me plenty too much.
and yes it has a Smith Chart
-------------------------------------
in comparison:
HP 4194A is very slow but has High accuracy and wide range-
 Impedance measurement:
 100 Hz to 40 MHz,
0.1 mΩ  to 1.6 MΩ, 0.17% - 10 kHz to 100 MHz, 0.1Ω  to 1 MΩ, 1.5% when used with the HP 41941A/B
 Gain-phase measurement:
 10 Hz to 100 MHz,
-107 dBm to +15 dBm, 0.1 dB resolution color graphic display
\
we are looking at starting range 100 Hz for gain and phase ,
 -and yes, it doesn't have Smith Chart ...so what,  this is  a tool the very precise tool!!!!
so if you're interested with having RLC impedance meter then you know that it will do so perfectly well but only starting from
100 kHz and up.
However in my application the most important is gain and phase - and that starts from 100 Hz for HP 4194A.

Despite of how modern or how old is the device is likely better than any nano VNA made in China.
however everything depends from the application.
For those who deal with frequencies over 1 MHz and mostly antennas they need something small and portable and that's what nano VNA is for.
---------------------------------------------------------------
 HP 8753 has few different versions and for VNA
for a hunter, it is the most confusing what to choose from that particle model.
The name seems to be always the same but there is a huge difference in configuration
for example the lower range may start from 300 kHz or from 30 kHz
and the model that I have starts from 30 kHz
so that VNA is mostly unused by me for Zenneck wave application
however it has very high upper range for those who deals with gigahertz
https://www.kirkbymicrowave.co.uk/Everything-you-wanted-to-know-about-the-HP-8753-VNA/


Wesley
« Last Edit: November 24, 2022, 01:48:03 PM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2276 on: November 23, 2022, 01:39:54 AM »
https://youtu.be/yMz_rtiM7FU?t=121
electrostatic lifting  now applied differently

 Those of you dreaming about floating objects in the air, might be interested.

https://youtu.be/2If9ZJQCyLA?t=307


Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2277 on: November 23, 2022, 02:08:35 AM »
 more  entertainment:
https://www.youtube.com/watch?v=R9-HWyYdB1g
Perendev Magnet Motor - Does IT WORK?!

you can buy it to check it out.
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2278 on: November 25, 2022, 01:22:20 AM »
5 Motors You Have To SEE To BELIEVE
https://www.youtube.com/watch?v=Jlo-sDrq24w
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #2279 on: November 25, 2022, 06:16:22 PM »
https://www.youtube.com/watch?v=nrEBoPYS4nsA Next-Gen Ionic Thruster! (For Flight)

https://youtu.be/wci0pJoMOqQ?t=232 7 STRANGEST New Drones

Wesley