Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze and other FE discussion  (Read 1146361 times)

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #30 on: June 04, 2018, 09:30:17 AM »
In the style of Wesley.  :) Boasting.

Finally I repaired it! Ancient spectrum analyzer, USSR, 1970s.
10 MHz - 40 GHz
It cost me a little money and a lot of work.
« Last Edit: June 04, 2018, 01:15:06 PM by Sergh »

cheappower2012

  • Full Member
  • ***
  • Posts: 245
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #31 on: June 04, 2018, 10:53:15 AM »
In both the green box video and the 2005 video he runs a stepdown transformer
with a bridge rectifier to provide feed back to loop the device,what voltage do you think
that transformer operates at and what  frequency.

The clamp meter I have is made by the same company as the one in the green
 box video,I bought it from harbor freight a while back.In the green box video your inducing large pulses,
why do you think he can't read 220 vac in a part of the video
,because the pulses cause false triggering in the meter.
Tariel is a very smart guy he must have discovered this fake current effect and used it to
create a wild goose chase.The arc ,spark gap and the large coil serve no purpose, its to fake you out that's related to something Tesla invented.

In one video he shows a 3 phase device in it ,there's a panel
that has a frequency meter it reads 50 Hz.


A certain Canadian guy presented a theory that the green box is fake
there is missing a few angles that would show hes theory would not work
however the green box video  is missing these angles this was not an intent
but simply there not shown,so it could be a fake device based on the video shown.
Figuring where things go from a video is hard if an angle view is missing.

I'm from the USA.

People tend to idolize Tesla and almost refer to him as a deity
this causes them to make mistakes.

Everything starts out as an opinion,is something plausible, is what I ask,
does this means its completely correct no ,but it is possible.
What the voltage is and what frequency is,is important as related to the type of load used.

I don't see you provide any scientific proof,your assuming that the
measurement of the ground current was correct,and speculating on that.
Since you don't know how hes device works,your no better than anyone else.I can see that your not open to new ideas and have an ego problem
also,so this will be my first and last post.

https://www.youtube.com/watch?v=BgqUyJwdfVk
Two frequency meters show the output is 50 HZ
here is a jpeg of one,its a 3 phase device



forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #32 on: June 04, 2018, 12:06:17 PM »
If you want to understand Kapanadze you must see all videos of all devices together then search for missing answers in Barbosa&Leal patents. Wesley is partially correct , it's the flow of energy which exists around us, differently explained by various inventors. Some said about telluric currents, some about atmospheric electricity (even Figuera !) some about Earth magnetic field, some about cosmic rays or strange "aetheric force".
THEY ARE COMBINED , that's why we can't find the proper theory. We have situation of multiple energy sources and effects. Add to it possibility that magnetic field is a flow of stead state energy from different space-time and you see what a mess we have to explain !

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #33 on: June 04, 2018, 12:54:26 PM »
Add to it possibility that magnetic field is a flow of stead state energy from different space-time and you see what a mess we have to explain !
This is good in theory.

https://en.wikipedia.org/wiki/Relativistic_electromagnetism
But how to this theory solder transistors and light bulbs?  >:( It does not matter who and how, Tariel or someone else will start the topic and tell how to do it somehow.
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #34 on: June 04, 2018, 01:34:19 PM »
This is good in theory.

https://en.wikipedia.org/wiki/Relativistic_electromagnetism
But how to this theory solder transistors and light bulbs?  >:( It does not matter who and how, Tariel or someone else will start the topic and tell how to do it somehow.
if that is so, look no further than a Don Smith circuit and device lay out, if what you say works for you  ;D

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #35 on: June 09, 2018, 08:46:13 AM »
That was a long time ago... :'( Here is the original, "first release":

https://www.skif.biz/index.php?name=Forums&file=viewtopic&p=106822#106822

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #36 on: June 10, 2018, 09:42:08 PM »

Dropbox :since this is more like diary or  storage box I will store here some handy  links that I found to be interesting or important.
So this  is my :

Dropbox #1
High Voltage Electrostatics:  http://www.keelynet.com/
-intro to electets: 
 htthttp://www.keelynet.com/electret.htmp://www.keelynet.com/indexjan16.html


-Self-Generating Electrical Discharge  Alexander V. Frolov :
http://keelynet.com/energy/frolov1.htm
http://keelynet.com/energy/frolov2.htm

http://www.rexresearch.com/chernetskii/chernetskii.htm                             Plasmatron (this link is partially BS  but has important information)
http://revolution-green.com/high-power-electrostatic-motor-95-efficency/     High Power Electrostatic Motor with 95% Efficency

https://www.youtube.com/watch?v=H6oAZi8Cc5I 
three components  we need :
1.electrical  motor 1 or 3 ph.
2. capacitor
3. diode
all of them are present  in the video.
The guy has no idea  about (conditions and components needed):
a. resonance frequency
b.  two grounds ,
But he has Variable Frequency Drives VFD
to get  anything  is needed.
(this video in in relation  with material from above)

https://overunity.com/12794/re-inventing-the-wheel-part1-clemente_figuera-the-infinite-energy-machine/msg400411/#msg400411  Solar Lab reference links.



Wesley
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #37 on: June 11, 2018, 12:17:24 AM »
Tinsel your a clever guy! any idea how I can generate a 9hz stand alone tone from a freely available crystal by division or knocking out bits ?
Since 9hz appears to be a resonant spacial lock on frequency rather than 8hz, the Don Smith device for one at 35.1khz.

Many thanks
ag

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #38 on: June 11, 2018, 03:13:22 AM »
Tinsel your a clever guy! any idea how I can generate a 9hz stand alone tone from a freely available crystal by division or knocking out bits ?
Since 9hz appears to be a resonant spacial lock on frequency rather than 8hz, the Don Smith device for one at 35.1khz.

Many thanks
ag
Uh huh. I see you posted a link to my "subharmonic" demonstration video... but the message was lost on the target audience. Oh well.


Meanwhile: this might work for you:

MicroSemi ZL30167: among many other features:
"Four Programmable synthesizers generate any clock rate from 1 Hz to 750 MHz"
https://www.microsemi.com/product-directory/otn-timing/4622-zl30167
Get the exact, stable frequencies you need, beat them together, have a fine party.


Of course if you don't need absolute stability or multiple independent clocks you can generate a reasonable 9Hz signal with a 555 timer chip and a few resistors and capacitors.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #39 on: June 11, 2018, 04:40:23 AM »
So here  is another factor supporting working model  of Tariel Kapanadze devices  promoted by me

Рабочая модель Тариэля Капанадзе, продвигаемая мной.
На этом острове нет электричества.
Тариэль подключил к устройству нагрузку 10 кВт. в виде лампочек.
Мы знаем что электродвигател без механической нагрузки тянет  больше тока, только в течение первых нескольких секунд .
После этого требуется часть "начального тока". (этот конкретный двигатель ~ 0.71 A при 220V.)
Почему Тариэль нуждался в этом моторе?
Ответ в сообщении, -( сделанны  мной ранее.) Просто прочитайте


Here  below is the picture  form presentation  that  was made on deserted remote island .
There is no electricity on that island.
Tariel had 10kW load connected to the device.  in form of light bulbs
 
We know that electric motor without mechanical load takes larger current only  during first few seconds and after that  takes   fraction of "start" current.
this particular one ~0.71 A at 220V.

So now THINK MY FRIENDS ...
Why Tariel was in need to have that motor there?

or
as an answer you take   material posted by me earlier?
https://www.youtube.com/watch?v=oXLxTjc9m3k





Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #40 on: June 11, 2018, 05:21:01 AM »
Tinsel your a clever guy! any idea how I can generate a 9hz stand alone tone from a freely available crystal by division or knocking out bits ?
Since 9hz appears to be a resonant spacial lock on frequency rather than 8hz, the Don Smith device for one at 35.1khz.

Many thanks
ag
Interesting, tell me more
 
Wesley

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #41 on: June 11, 2018, 08:19:13 AM »
Interesting, tell me more
 
Wesley
Well Well it's complicated but with out going in to it too much, but it looks like the earth resonates at a base frequency of 8hz
and the universe at 9hz it can get spooky but things tend to end up being high energy based at ether one or the other frequency, or a
combination like 432 adds up to 9 the energy of the universe creation it self like it or not, and also divides equally 9 and 8 and it also in
harmony with us humans as in PLEASING HARMONIOUS music.
If your going to pick a frequency or vibration everything has to be in tune.
However base 9hz or 432hz is not an easy frequency to synthesis of the shelf!
What does it have to do with this subject ? EVERYTHING!

AG

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #42 on: June 11, 2018, 12:44:25 PM »


A century later EINSTEIN introduced  Special  Relativity  and  since  then  it  was  common  to  summarize MAX-WELL’s equations with four-vectors.
http://www.zpenergy.com/downloads/Orig_maxwell_equations.pdf
Wesley
« Last Edit: March 08, 2023, 11:13:15 PM by stivep »

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #43 on: June 11, 2018, 04:39:01 PM »

...  think i will try and get a a 9mhz xtal and a tube of cmos decade dividers  8) 8)
Hi AG,

You may consider these to get a 9 Hz signal:
1)  There is accidentaly just a 9 kHz crystal on sale at ebay ( https://www.ebay.com/itm/263714732731 ) and you divide the 9 kHz oscillator you build from that crystal by 1000 to get 9 Hz. No need for a tube of decade dividers but only 4 pieces...  ;D

2)  There is the NE567 (LM567) tone decoder IC you may know or be aware of. It has a precision RC current controlled oscillator (better than that of say in the NE555) capable of operating from very very low frequencies. 

What I think it would also be practical to run the built-in oscillator at 9 Hz and phase lock it to the 9th harmonic of a 1 Hz reference clock you derive from a normal 32.768 kHz oscillator and divider chain used in crytal controlled watches.

Yes,  the 9th harmonic of a 1 Hz square wave may have a small amplitude at 9 Hz but using say a 2nd order active op amp band pass filter for 9 Hz would help to clean up and amplify  the 9 Hz signal component to feed the phase comparator input of the NE567 and establish phase lock with its internal oscillator, that would be your 9 Hz output signal.

Of course you would need to use good quality RC components for the active filter and for the NE567 oscillator (R1C1).  Here is the data sheet: http://www.experimentalistsanonymous.com/diy/Datasheets/NE567.pdf  and pay attention to the several application hints too.  Texas Instruments still manufacturs this IC as LM567, what is more a CMOS version LMC567  too.   

Good luck.  8)

Gyula
PS,  Wesley,  sorry for this off-topic...

apecore

  • Guest
Re: Wesley's Kapanadze and other FE discussion forum
« Reply #44 on: June 11, 2018, 08:46:15 PM »
Guys,


 I don t know its origin..  or its final doc.