Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: 170 watts in - 1600 watts out - looped - Very impressive build and video  (Read 223955 times)

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
https://www.youtube.com/watch?v=h_-xw_hL8nQ

 part 3


AWESOME!!!   Completely Self Running!  Looped!   I haven't watched the whole video yet as I skipped ahead to see if that is what he was going to do and it appears he has done exactly that.   Interesting action with the iron filings showing the rotating magnetic field with no mechanical rotation.   It looks like there may be some commonality with the Steven Mark's TPU.

x_name41

  • Sr. Member
  • ****
  • Posts: 254
Hello everyone, the principle of this generator represents multiplexing all 36 coils (with a coefficient = 1/36) , only one coil is powered all the time. Obviously there is a summation of the power from all windings.

and a simulation of the 1 of 36 electromagnet cells: http://tinyurl.com/y92yff76

memoryman

  • Hero Member
  • *****
  • Posts: 758
Of course, the question of where the claimed extra energy comes from, is never answered.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
start here there are over 20 digest and enjoy  ;D ;D

pmgr

  • Full Member
  • ***
  • Posts: 184
    • Stop organ harvesting from Falun Gong practitioners
Slow down the Youtube video to a factor of 0.25 of normal speed, then focus on a single relay LED and use your phone stop-watch to see how long it takes for 10 flashes of the LED.


I get about 10.5secs. So this means that the frequency of the relay switching is about 3.75Hz.


He measures a frequency is 60.6Hz, so it is not clear how his switching frequency is multiplied by a factor of about 60.6/3.75=~16 to get from 3.75Hz to 60.6Hz. Anyone?

seaad

  • Sr. Member
  • ****
  • Posts: 311
I have toggled the film frame by frame and found that it is always between 6 -12 relay LEDs lit simultaneously.  . . . . 10 12 10 10 6 8 10 10 8 6 10 .... 6 8 10 10 10 8 8 8 8 8 12 10 12 8 8
Regards / Arne

Temporal Visitor

  • Full Member
  • ***
  • Posts: 190
Number 4

https://www.youtube.com/watch?v=t1abEsE4R3U

The 60 HZ is very impressive ?

or Odd...

Hi Chet,
The output frequency is a matter controlled by the Arduino internal clock/crystal and the software/code routines running inside it to control the outputs that fire the hardware/relays being switched. I don't have any experience with Arduino but have worked with 8051/80552 since dinosaurs roamed.

His whole system is very logical and impressive, my hat is off to him.

tinman

  • Hero Member
  • *****
  • Posts: 5365
Of course, the question of where the claimed extra energy comes from, is never answered.

Thermionic transconductance  :D

But the flashing lights are pretty ::)

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
I think the frequency is too exact for the mechanical relays to get exactly 60.7 Hz and
only changin in the 1 digit after the decimal point....
With an upconverted frequency from 3.75 Hz to 60 Hz like this, the frequency should basically change more ??
Well if these are really always 12 LEDs on, then he is really using some kind of flux overlapping to convert the lower frequency to a higher one,
like using phase shifting at the 16 x frequency or so.... or it is a full fake powered somehow by the mains frequency...but then, how has he done it ?
Just powering his supercaps from behind, where one can not see the cables going to the supercap boards ?
But this would not explain the really exact 60 Hz..Hmm....
« Last Edit: April 01, 2018, 04:41:48 AM by gotoluc »

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
I have toggled the film frame by frame and found that it is always between 6 -12 relay LEDs lit simultaneously.  . . . . 10 12 10 10 6 8 10 10 8 6 10 .... 6 8 10 10 10 8 8 8 8 8 12 10 12 8 8
Regards / Arne

Yes, Arne you are right, he seems to use some kind of interleaving setup.
In the circuit board below the Arduino he uses 5 rows where always 2 or 3 LEDs are on and location shifted, so already an interleaving.

Then the Relay board under the Supercaps bank also has always at least 2 or 3  LEDs on at the same time, but not directly the next one but
the next but one point position....
Hmm, seems he uses very complex interleaving to upconvert the frequency somehow...

Regards, Stefan.

seaad

  • Sr. Member
  • ****
  • Posts: 311
I have been interested in the Figuera principle a long time see my last thoughts here: http://www.energeticforum.com/307838-post2691.html  Post 2691
Here at this thread my A)-part/ thoughts fits.
I have tried in many experiments to "simulate" a magnet passing bye a coil with fixed coils. Not succeeded yet.
But it's there we have to start !

Regards / Arne


memoryman

  • Hero Member
  • *****
  • Posts: 758
It would be interesting to see the real line frequency displayed at the same time as the 'generated' one. I suspect that they will be identical.

seaad

  • Sr. Member
  • ****
  • Posts: 311
Stefan, all

Check the slow "beat" rate of the iron fillings. I don't think it is interferences with the movie frame rate. And we see many  "islands" of filling in a circle!  They don't rotates as hell. 60 Hz. And the template with magnets didn't spin? (Frame interference??)

Regards / Arne

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
I think I have figured it out, how the poles are aligned inside the rotor.
He is using a 16 poles virtual field, like this, which is rotating, so the coil gets 16 inductions per rotation...
Like these car wheel spikes would cut the coil 16 times per revolution...
So that is how he could have interleaved his coils...to generate the fields like these car wheel spikes show...

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Actually this wheel has 15 spikes, must be probably a wheel with one more spike....lol... did not find a better picture right now...