Author Topic: Negative Inductance and measure of Magnetic force. (Read 166815 times)

synchro1 · « **Reply #210 on:** May 22, 2018, 02:30:36 PM »

Here's a comparison of the outer and inner Uxcell SPDT switch. The outer switch has a cam lobe action that caused it to stick, so I removed the internal switch with it's linear press spring. This streamlined switch is the central component that replaces a cumbersome commutator and it's external power supply. I have this tiny internal switch sandwiched between two bamboo barbecue skewers and held in place with elastic bands. Works like a charm! Power in and power out being equal, that leaves the physical work of the magnet lever as a free energy source.

Here's a short video of the switch action:

https://www.youtube.com/watch?v=rnnW4a2WzgI

NerzhDishual · « **Reply #211 on:** May 22, 2018, 08:05:31 PM »

Hi experimenters,

I have not read this entire thread.

Anyways, while we are at electro-magnets, just my 2 cents...

A French "patent" (in attached file) with some translations.
It is a not granted patent, you bet it is not as it claims OU.

-------------------------------------------------------------
FR2363929 - BESSON- 6 septembre 1976
Générateur d'électricité mu par la force magnétique
--------------------------------------------------------------
Magnetically powered electricity generator - uses electric power output
to generate driving magnetic field providing free energy supply.

The generator derives its motive force from a magnetic field and is self-exciting
-- ie a part of the electric energy generated is used to create the magnetic field.
The magnetic field is produced by several electromagnets (1) fixed to a wheel (4)
driven by a motor (2). A mass (7) regulates the generator's (

speed of rotation.
The wheel is linked via a chain (3) and pulley (6) to the generator.
The generator output is in turn used to power the motor, with the weight
(7) preventing excessive operating speeds.

Bien le bonsoir,
Jean

NerzhDishual · « **Reply #212 on:** May 22, 2018, 08:08:25 PM »

Here is the patent:

synchro1 · « **Reply #213 on:** May 24, 2018, 12:10:49 AM »

This Uxcell switch is actually a DPDT switch that I removed 1/2 the poles from. You can see four receptacle pin holes behind the pins below. This is a second switch. So we can use this switch to reverse the polarity. Turning two switches is too much work for the oscillator to shift.

synchro1 · « **Reply #214 on:** May 24, 2018, 01:13:10 AM »

A preliminary measurent:

https://www.youtube.com/watch?v=ArjR7cY1wuY

synchro1 · « **Reply #215 on:** May 24, 2018, 07:10:53 AM »

I've been taking closer measurements, and it appears the generator is operating at a COP 2 after it warms up. There's a "Mag amping" of the electro-magnet that restricts the input the coil can handle after it warms up. The amp draw drops to .003. The amp reading on the output wire from the positive of the coil is .025. The input voltage was 9.65 A.C. and output 2.50 volts. We can see from the math that the saturation restriction on input is boosting the COP to over 200%.

synchro1 · « **Reply #216 on:** May 25, 2018, 04:45:50 PM »

Video of beefed up magnets generating 40 volts:

https://youtu.be/qf_WWjf1Rr0

synchro1 · « **Reply #217 on:** May 25, 2018, 11:36:29 PM »

Here's the twelve pin switch:

synchro1 · « **Reply #218 on:** May 26, 2018, 03:03:11 PM »

Short 12 pin switch video:

https://youtu.be/mEuPt-6cr4M

synchro1 · « **Reply #219 on:** May 26, 2018, 07:18:42 PM »

We can see how increasing the magnet strength increases the output voltage. This is an over unity effect, and is independent of input power.

synchro1 · « **Reply #220 on:** May 31, 2018, 03:03:41 PM »

My initial supposition was that a "Sheer" to "Push Pull" advantage would appear between the permanent magnet piston and the electro-magnet coil. It appears that the relationship may in fact be hiding this kind of an offset value adding to an over unity factor.

synchro1 · « **Reply #221 on:** May 31, 2018, 11:30:56 PM »

New streamlined approach of tucking the bumper discs right onto the rim of th electro-magnet.

synchro1 · « **Reply #222 on:** June 01, 2018, 04:34:07 PM »

Video of the latest oscillator:

https://www.youtube.com/watch?v=D4QONU17UFE

synchro1 · « **Reply #223 on:** June 02, 2018, 10:47:20 PM »

More power generated with higher operating speed.

https://www.youtube.com/watch?v=mLZLcgzEq5k

Reiyuki · « **Reply #224 on:** June 03, 2018, 07:28:55 AM »

Great work Synchro.

Thanks much for sharing

News:

User Menu

Author Topic: Negative Inductance and measure of Magnetic force. (Read 166815 times)

synchro1

Re: Negative Inductance and measure of Magnetic force.

NerzhDishual

Re: Negative Inductance and measure of Magnetic force.

NerzhDishual

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Initial supposition

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

synchro1

Re: Negative Inductance and measure of Magnetic force.

Reiyuki

Re: Negative Inductance and measure of Magnetic force.