Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Negative Inductance and measure of Magnetic force.  (Read 165572 times)

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #195 on: March 09, 2018, 04:26:02 PM »
Check this one out:


https://youtu.be/3ykm-blvC-U


I'm getting better (Attraction-Neutralization) off the kickback from my "500 Newton Electro-Magnet Coil" then with the series bifilar coil. This setup generates a huge amount of current in the "Electro Magnet Coil" from the attraction stroke as I've demonstrated in my videos. All it would take is one commutator Reed switch for output off the "Electro-Magnet Coil". I think I can place the output Reed switch on the other side of the Neo magnet spinner.I'll upload another video of this soon. I believe this combination will prove to be way Overunity.

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #196 on: March 09, 2018, 04:59:56 PM »
I'm shifting my emphasis away from the serial bifilar and back to the induction formula because I found my "Electro-Magnet Coil" outperforms the serial bifilar for the following reason:

Magnetic field strength is a function of inductance and input. Two coils, one with higher inductance and the same input will  generate a magnetic field whose strength is in direct proportion to it's weight in copper and core permeability.

The final design is a pulse motor with a tube spinner and magnetic axle bearings like Skycollection's. This spinner needs one adjustable output coil to regulate R.P.M. with Lenz drag. The spinner has two reciprocating "Reed switches" reverse biased on either side of the tube magnet. One's on for the pulse to the aircore power coil while the other at 180 degrees is off and viva versa. The output switch runs from the attraction neutralization electro-magnet to the destination; Load, capacitor or battery.

The electro-magnet coil is powered by "Inductive Kickback" from the aircore power coil. The output is channeled from the electro-magnet coil through the second Reed switch to the destination as pulsed D.C. during the attraction phase of the piston cycle.

The most important point here is that the output has an asymmetric relationship to the kickback input and is a function of electro-magnet coil and core inductance coupled with oscillating attraction piston magnet strength, not input power.

We're at the dawn of a new free energy era, and public announcement of this free power generator needs to be accompanied by a disclosure of a "Geo Resource" protection policy to avert market panic. Time to pop the corks folks! Every man a sultan and woman an equal.     

 
« Last Edit: March 09, 2018, 08:22:58 PM by synchro1 »

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #197 on: March 09, 2018, 07:43:26 PM »
One additional detail; A timing wheel on the axle hub would permit us to extend the output discharge time with a latching Reed switch. We can increase power to the kickback oscillator and sustain the R.P.M. by repositioning the primary spinner output coil more closely to the magnet tube increasing Lenz drag. Naturally this would result in more output from both sources.

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #198 on: March 10, 2018, 06:59:32 PM »
Here's a video of the pulse coil back spike oscillating a ferrite magnet piston with an electro magnet:

https://youtu.be/Dvhixhl93Qs

The oscillation is greatest at low R.P.M. The piston begins to stand still as the Neo spinner speeds up. At:48 seconds into the video, the spinner R.P.M is gyrating the ferrite rod at maximum output frequency. I can't control the speed with this test setup, however it's very simple to regulate it with the addition of a potentiometer.
« Last Edit: March 11, 2018, 01:29:44 AM by synchro1 »

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #199 on: March 10, 2018, 09:31:22 PM »
These two Hob Nilre videos should both be watched; They are the essential key to understanding the Over-Unity principle behind the "Neutralization Attraction Oscillator":

https://www.youtube.com/watch?v=IIeRR6NjMPQ&t=30s

https://www.youtube.com/watch?v=zu_v7jMs-ms

"Double the copper - half the power. Or you could double the copper but same power - double the force, its just harder to measure".

Double the copper in the EM coil, we double the force for the same power; That would allow us to double the magnet strength in the oscillating piston and double the output through a Reed switch. The addition of a Reed switch timed to make contact as the piston is attracted toward the EM core, turns the EM into a hybrid output coil.

Art Porter had 500 pounds of circuitry under his test bench to generate the kind of pulse I'm generating with my Reed switch pulse coil.
« Last Edit: March 10, 2018, 11:31:49 PM by synchro1 »

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #200 on: March 11, 2018, 02:23:54 PM »
Hob Nilre levitates a stack of tiny ball magnets over his charged aircore copper wire inductors in his first video. What happens when he interrupts the current to the inductor and the magnet spheres fall back toward the wire coil? They generate electrical power in the coil. right? The coil in turn generates a magnetic field of it's own in accordance with Lenz's law that opposes the descent of the spheres, but the net effect results in an electrical charge in the coil. Where's it go? No where because the charge has no pathway to travel away from the coil through, so it just dissipates as waste heat.

This is an elementary analysis that everyone should be able to agree to; Secondly, the charge that's generated by the descending stack of magnet spheres in the larger coil has a COP that's double the COP of the coil and magnet balls in the smaller coil of half it's weight in copper. This is an extremely important point in the understanding of Over-Unity.

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #201 on: March 11, 2018, 03:22:35 PM »
500 Newtons to Pounds-force = 112.4045.

We can make an electromagnet stronger by doing these things:

1.-Wrapping the coil around an iron core.
2.-Adding more turns to the coil.
3.-Increasing the current flowing through the coil.

Here's a question for thought; Would increasing electromagnet strength by wrapping the coil around an iron core produce the same COP advantage as Hob Nilre demonstrates by adding more turns of copper wire to his second coil?

Would the addition of an iron core lift Hob's stack of magnet balls higher for the same input like the coil of additional copper windings?

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #202 on: March 11, 2018, 04:44:18 PM »
Following this logic we arrive at common factor called inductance. The greater the inductance, whether a result of an iron core or increased copper windings yields greater magnetic force per unit of input power.

Suppose we perform Hob's test again with the toy magnet balls. One coil with an iron core the other an air core of greater copper weight then the control coil. Each coil will show the same repulsion advantage of increased magnetic field strength in proportion to their inductance, but what happens when we interrupt the current and measure the output from the free fall of the magnet balls toward the coils?

Lo and behold, the iron core coil will generate more power then the aircore from the addition of the attraction force between the stack of magnet balls and the iron core.

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #203 on: March 11, 2018, 07:24:12 PM »
The iron core coil would need a spring in between the end of the core and the stack of magnet balls to prevent the shock of collision. Secondly, the coil would need a switch to channel the output to a storage destination during the attraction phase.

Art Porter ran a multitude of exact measurements on his GAP coils and determined there was an asymmetrical ratio of input to output. How much Over Unity output would depend on several factors, like inductance and magnet strength, but there exists a disproportion between the neutralization repulsion pulse and the attraction output.

The BEMF powered Electromagnet coil and elastic piston widens the COP gap because we're using waste energy from a closely balanced Pi/Po spinner output coil system. The crude setup in my last video may have a possible Over Unity COP that is off the charts.

Floor

  • Guest
Re: Negative Inductance and measure of Magnetic force.
« Reply #204 on: March 12, 2018, 01:37:57 AM »
@synchro 1

Thanks for the topic and presentations.

Let me preface my interactions with an intro.

I haven't done any serious electronics tinkering in more than 20 years
and ..... it was another 20 years earlier,  that I studied electronics in school.

So to say that that I'm merely rusty in this arena would be an under statement.
...........
In the quote (below)

synchro 1  "The issue here is whether the inductance meter measures an "Inverse Henry" or not. "

I think you my have allowed yourself to be steered off of the main thrust of your investigations.

Personally, I don't at this point care,  if its negative henrys, inverse hanrys, magnetic probes, or even meter error and I don't feel threatened by your perceptions / ideas / theories / interpretations .... if considered correct or otherwise.

Please continue to give us your presentations.
             good hunting
                  floor

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #205 on: March 12, 2018, 08:53:26 PM »
@Floor,

Thank you for your generous compliment.

Look at the core of the 500 Newton electromagnet in the picture below. Generating magnetic field strength through core inductance has the twofold advantage of increasing attraction to a magnet piston and reducing input consumption.

Core permeability is a central concern for the oscillator. The Electromagnet has a high state of the art alloy that delivers high inductance, magnetic attraction and low remnance. The EM needs to relinquish it's attraction when the power's disconnected and not continue to adhere to the magnetic object. Iron is easily saturable. The EM, I believe, is a space age Samarium-Cobalt alloy scientifically tested for a BH curve suitable for the GAP oscillator.

Floor

  • Guest
Re: Negative Inductance and measure of Magnetic force.
« Reply #206 on: March 12, 2018, 09:38:12 PM »
@Synchro 1

Quote
"The masking oscillator generates power in proportion to the magnetic force of it's backing magnets.
It's curious that we can control greater amounts at no increased cost to input power." end quote
                                                       Yes this is interesting.
Quote
"Look at the core of the 500 Newton electromagnet in the picture below.
Generating magnetic field strength through core inductance has the twofold advantage of

increasing attraction to a magnet piston
                    and
reducing input consumption."

1. Generating magnetic field strength through core inductance (which inductance / where ?)
2. increasing attraction to a magnet piston  (as compared  to ?)
3. reducing input consumption (as compared  to ?)

Can you give me a walk through, start to finish on these points.

Might help others to better understand as well.

                     regards
                         floor

sm0ky2

  • Hero Member
  • *****
  • Posts: 3948
Re: Negative Inductance and measure of Magnetic force.
« Reply #207 on: March 12, 2018, 10:46:22 PM »
15 pages.....


What have you discovered from experimenting with this
“negative inductance”?


And have you taken any measurements of the magnetic force?

ramset

  • Hero Member
  • *****
  • Posts: 8073

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Negative Inductance and measure of Magnetic force.
« Reply #209 on: May 21, 2018, 11:47:20 PM »

O.K Synchro's back home now: Check this latest build out. I'm measuring unity:

https://www.youtube.com/watch?v=fL7-60ZZa10