Free Energy | searching for free energy and discussing free energy
Solid States Devices => Kapanadze devices and replications => Topic started by: justawatt on October 13, 2017, 06:48:40 PM
-
A youtube user made a replication ,His quote
" I sent Maxim $5000. He sent me the coils, diodes, caps, resisters, and a mosfet. I spent a lot time building the unit. The unit did't work! He said it was a problem with the coils and would send me new ones but never did. If anyone else purchased this and got it working please let me know! Maxim no longer responds to my emails. When something is to good to be true it normally is! I was scammed! I hope this stops you from sending money to this guy. This is his partners name I sent the money too- Khomenko Mykola Leonidovych. In Ukraine. "
https://www.youtube.com/watch?v=lxLloV5imr4
-
Sorry to see you got scammed out of $5k justawatt
I'm very thankful you're taking the time to post your results and unfortunate experience to help others understand that most of OU claims are scams or incorrect power measurement.
I've been researching and experimenting for the past 10 years and never found anything more then 98% efficiency.
It doesn't mean I'll give up just because the possibility of OU is 99.9% impossible.
But one has to think that if the odds of achieving OU are so bad then you should never look elsewhere and pay someone to do what you can't achieve on your own.
You would just asking for problems then.
Thanks for being brave in sharing your unfortunate experience to help others.
Luc
-
You cannot do this ! Overunity is not about the special coils or frequency or Russian parts or rare electronics ! It is a METHOD you must LEARN and a source you must understand. KNOW-HOW is the only way to build it. A mere wire connection or the wire length may be the reason it won't work.
If you read Tesla patents he explain it between the lines.All must fit together or nothing more then 100% will happen.Sometimes somebody find it by accident, like me in 2005 but many just dismantled the original setup to find out it won't work anymore :( like me.
But it will be soon you will find OU device in your home for cheap producing heat or for any other electric work done... because nobody could hide the TRUTH if public pressure is rising due to climate change. WE HAVE OU EVERYDAY , BECAUSE MAGNETIC FIELD IS THE SOURCE OF ENERGY IN EVERY GENERATOR - we just need to break the implemented feedback loop requiring to burn fuel to spin generator shaft , that's all. Or to construct device with the MAGNETIC FIELD INTENSITY being larger without consuming larger power input. Tesla did that with his capacitor discharge,others did by resonance or by implementing feedback loop diametrically opposite to the one used in generators.
-
previously sold circuit by him to another person 2500$
-
A youtube user made a replication ,His quote
" I sent Maxim $5000. He sent me the coils, diodes, caps, resisters, and a mosfet. I spent a lot time building the unit. The unit did't work! He said it was a problem with the coils and would send me new ones but never did. If anyone else purchased this and got it working please let me know! Maxim no longer responds to my emails. When something is to good to be true it normally is! I was scammed! I hope this stops you from sending money to this guy. This is his partners name I sent the money too- Khomenko Mykola Leonidovych. In Ukraine. "
https://www.youtube.com/watch?v=lxLloV5imr4
Hi justawatt,
What I can say is, the circuit diagram is missing components. ;) this is serious.
The real secret behind this device is something that VASMUS had shown some time ago and is easy to spot it if you know where to look at.
His coils and operation are same for this one, Maxim just added up more coils to step up the output.
You will need a " modulating " circuit after the harvesting coils direct connected to # 5-6 and #7-8 coils on your diagram.
it will pulse the energy after receiving recified from of energy from the diodes and charging the caps and so on. ;)
remember you want this energy to charge the caps fast since it's HV, making it DC pulsed to the caps will make good amps..
I might someday... try out Vasmus device, but currently on Akula device.
cheerz ~
Visit VASMUS videos, it might give you the hint ;)
-
Thanks for sharing your experience justawatt. One way or an other, someone has to pay a lot for finding his path.
-
circuit diagram based on the 2500$ diagram he send ,
-
It's a problem to know where to start to debug any of it as you cant tell or get an idea of how it should work from any of the windings or wire wave length as that can change with core medium. To be honest the circuit diagram is useless as it stands unless you have some build instructions or coil winding details even if it cost a fortune or not ! One thing you need to look at is how you tune any of the coils or what the scope test points should look like, but sorting it out is some task you have.
Regards AG
PS there does not appear to be any consistency between any of the drawings or the videos even your device is different from any of the other vids 8) it's any ones guess on what works.
-
It's a problem to know where to start to debug any of it as you cant tell or get an idea of how it should work from any of the windings or wire wave length as that can change with core medium. To be honest the circuit diagram is useless as it stands unless you have some build instructions or coil winding details even if it cost a fortune or not ! One thing you need to look at is how you tune any of the coils or what the scope test points should look like, but sorting it out is some task you have.
Regards AG
PS there does not appear to be any consistency between any of the drawings or the videos even your device is different from any of the other vids 8) it's any ones guess on what works.
Is Geo referring to tuning the wave length to a fraction of the tuned wave length ? obviously in a sine wave the only useful value is the peeks anything else is of no value as it's zero.
-
guys i am not the one who made this or bought this device.
The youtube users name is "Captainloz".
-
guys i am not the one who made this or bought this device.
The youtube users name is "Captainloz".
Hi justawatt. Yes, that was clear from your very first post.
Some people are not reading very carefully. ;D
Justawatt, you seem to be saying that you believe
Maxim Aliyev (Максим Алиев) = Roma Gric (Рома Гриц) = Andrei Bryukhovetsky (Андрей Брюховецкий)?
Is that correct?
They all seem to be from Ukraine, so that is certainly possible.
'Andrei Bryukhovetsky' was the Youtube account name that 'Roma Gric' apparently used prior to creating
his 'Roma Gric' (Рома Гриц) Youtube account. So, if this is all the same person, he seems to be periodically
changing his Youtube accounts. :)
It seems 'Maxim Aliyev's' real name may possibly be 'Khomenko Mykola Leonidovych', as that is the
name for the bank account which captainloz stated he sent his money to in the Ukraine anyway. Captainloz said
'Maxim Aliyev' has not been responding to his emails even though he hasn't been able to get his purchased
OU device parts to generate OU, and even though he seems to have followed the provided schematic very closely.
Captainloz stated that Maxim Aliyev said he was going to send new coils, but then stopped responding to he emails.
So it seems this person in the Ukraine may be just another scammer. Well, it is a given that people who sell claimed
overunity devices over the internet without letting people come and inspect the devices in person first before purchasing,
and who ask for money to be deposited directly into their bank accounts or through Western Union could very well be
scammers anyway.
-
based on the reference from video clip
-
based on the reference from video clip
Hi justawatt. Which video clip are you referring to here?
-
thanks void for the reply.
Maybe the inventor who send him the device ,claims his device works ,may or may not be scammer.So far i came across two different people who have send him money. Lets say if the circuit he send is real ,maybe some small part he hide. But say suppose he have shared 99% of his circuit .something is better than something.
The circuit i shared was from another person who send 2500$ for the circuit.
same circuit we can see the video i shared .
what i found interesting was the right side coils , there is some pattern for his winding is similar to Ruslans and akula windings (assume if some info he shared is right).
If you see the first device of his ,right side coil had not contact with the kacher. That side was independent.
-
Hi justawatt,
Interesting diagram correction you posted, hmmm not sure still if it will need the modulating circuit (Thyristor).
I see in the left upper corner of the pic of correction a diagram, do you have that one originally? is it possible to get that one?.
that one seems more to what the video is showing as I have an eye for everything and then to compare and try out. ;)
This is one of them, that should turn out to be easy to have it working, it's all direct connections and not really about wave lenght here
just step ups and step down High voltage with high current for loading.
see if it is possible getting that diagram which I mentioned ;).
Cheerz~
-
thanks void for the reply.
Maybe the inventor who send him the device ,claims his device works ,may or may not be scammer.So far i came across two different people who have send him money. Lets say if the circuit he send is real ,maybe some small part he hide. But say suppose he have shared 99% of his circuit .something is better than something.
The circuit i shared was from another person who send 2500$ for the circuit.
same circuit we can see the video i shared .
what i found interesting was the right side coils , there is some pattern for his winding is similar to Ruslans and akula windings (assume if some info he shared is right).
If you see the first device of his ,right side coil had not contact with the kacher. That side was independent.
Hi justawatt. Yes, it is possible the device is legit, but the fact that captainloz could not
get it to work yet is not a good sign. 'Maxim Aliyev' could still be leaving something important out
of the schematic or have deliberate errors in his schematics, but then that would still be considered
a scam since people are paying a lot of money to him for a device or schematic that is supposed
to be working. It will be interesting to see if captainloz hears back further from 'Maxim Aliyev'.
Yes, the schematics are interesting, but the second one labelled 'Kapanadze' is almost like a maze
trying to follow it. :)
All the best...
-
Hi justawatt. Which video clip are you referring to here?
https://www.youtube.com/watch?v=lxLloV5imr4
towards the end of the video you can see that
-
https://www.youtube.com/watch?v=lxLloV5imr4
towards the end of the video you can see that
Thanks! I see it now. I wonder if maybe captainloz got that Рома Гриц schematic somewhere else.
Interesting...
Here are two screen captures I made of the Рома Гриц schematic from the captainloz video.
It shows both tubes seem to have internal windings in them.
I don't know where captainloz got that schematic from however.
-
got to be something like quarter wave to keep it rattling away any way too much guess work ;)
-
Void,
Thanks for capturing the diagrams ;).
This device might be incomplete but the coil configuration is interesting to try out.
Hope this Captainloz can share this diagram HD.
Cheerz~
-
Here you go. Check out this video- https://www.youtube.com/watch?v=JoKshiv7k_0&t=189s
-
hi captainloz
Thanks for the share ,Where did you get the poma circuit you showed in the 3rd video at 7min .
From where did you get that circuit.
Can you share the source Link to page ,he i am right it is the similar circuit what a guy got for 2500$.
Which i shared . may be that circuit is right.
-
Hi capainloz. Sorry to hear you have been getting messed around by this Maxim Aliyev guy.
Not cool that he has stopped responding to your emails. Hope he does get back in touch with
you. Yeah, that story they gave you about the coils you have only working at the equator sure
sounds like a crock since they seem to be in the Ukraine. That's a bummer.
Thanks for showing that Рома Гриц (Roma Grits) schematic in your latest video. As justawatt mentioned,
it would be interesting to know at what link you found that schematic. I guess maybe it was at the Russian
realstrannik.ru forum or similar.
I am attaching the Рома Гриц (Roma Grits) schematic which I screen captured from your third
Maxim Aliyev video. There are people here who might be able to help translate this schematic
to maybe make it easier to follow for non-Russian readers.
-
I am attaching the Рома Гриц (Roma Grits) schematic which I screen captured from your third
Maxim Aliyev video. There are people here who might be able to help translate this schematic
to maybe make it easier to follow for non-Russian readers.
-
Hi fellers Void Memo nice work it looks like the ferrox int core is a stack of ferrite rings it sounds familiar,
also notice the 2 x 2SC2500 transistors are more like it all you need to make the core is stack them on on
some plastic pipe and some foam friction to hold it in place in the tube. and re wind them, and try again
and hope for better results.
Good luck.
AG
-
This is capain's circuit in a more clear form.
I'd like to ask Captainloz about the output transformer TT00. Do you have any info about that? Core, turns etc.
Thanks
-
Hi MenofFather. Thanks very much for translating that Roma Gric schematic.
Good job on that! I will look the schematic over and see if I can make sense out of it.
Captainloz: Do either of the coil tubes you have from Maxim Aliyev have
ferrite inside of them? If they do, the should feel fairly heavy.
-
Hi Guys,
I got these files from a Russian forum after google image searching for something looking similar to Maxim's device. I was searching around before I sent Maxim money. I figured his decvice was based on this, that's one of the reasons I thought it maybe real. I have no idea if the device in the attached files work.
I sent Maxim another email today, I doubt he will respond..
MenoFather, I don't know what's inside the coils, Maxim filled them with resin. I'm tempted to just cut them open but want to wait awhile to see if anyone comes forward to defend Maxim. Or if anyone else will come forward that have sent him money and have nothing to show for it. I want to be sure before I cut them up they cost me a lot of money.. :-\
Loz
-
Hi Guys,
I got these files from a Russian forum after google image searching for something looking similar to Maxim's device. I was searching around before I sent Maxim money. I figured his device was based on this, that's one of the reasons I thought it maybe real. I have no idea if the device in the attached files work.
I sent Maxim another email today, I doubt he will respond..
MenoFather, I don't know what's inside the coils, Maxim filled them with resin. I'm tempted to just cut them open but want to wait awhile to see if anyone comes forward to defend Maxim. Or if anyone else will come forward that have sent him money and have nothing to show for it. I want to be sure before I cut them up they cost me a lot of money.. :-\
Loz
Hi captainloz. Welcome to the forum by the way. Thanks for posting those docs.
I will have a look through them. Yes, there are a lot of schematics posted to various forums,
so it is really hard to tell which if any of them may be for legit OU devices. Yes, the Roma Gric and
Maxim Aliyev devices appear to have a lot of similarities. Both could well be scams though unfortunately.
Both of those two guys (probably not their real names) seem to be based in Ukraine, so they possibly
could be connected to each other.
Yes, you may want to hold off on damaging the coils for at least a while, and if you do eventually
take them apart it would be good if you could try to do it in a way that allows you to see exactly how
the coils are wound and connected internally, etc. without damaging the coils if possible; but that is probably
pretty hard to do if the tubes are filled with epoxy or resin.
Something to consider if you don't hear back from this 'Maxim Aliyev' guy, is to send him another
email and tell him that if he doesn't start responding to you and providing some explanations of what
is going on that you will lodge a formal complaint against him with the Ukraine National Police, and that
you will provide the Ukraine National Police with his email address, the bank account number and the name
that you transferred the money to, and inform the police that you have been scammed by that person or persons.
That might get 'Maxim Aliyev's' attention, although he/they will likely just try to give you more run around if they are scammers,
which it seems they are. If they don't respond in a reasonable way to your satisfaction, then I would go ahead and
report them to the Ukraine National Police. You could email the Ukraine Police in English and also include a Google Translation
of your text in Ukrainian as well. I don't know if the police there would do anything about it, but they might.
Ukraine National Police
https://www.npu.gov.ua/en/publish/article/340690
Contact information:
e-mail: info@police.gov.ua
Postal address:
10 Bohomoltsa Street
Kyiv 01601, Ukraine
Phone:
(044) 256-0333;
Fax:
(044) 256-1633;
-
the circuit he shared is one who paid 2500$. And in the circuit he asked him to put mercury.on the tip of ferrite.
can someone translate this video.
https://www.youtube.com/watch?v=ADTaFm4tOeQ
https://www.youtube.com/watch?time_continue=33&v=C8CBmawXXYk
https://yadi.sk/i/MULtZCAY3H9tV8, https://yadi.sk/i/IX-CiYwe3H9tUX, https://yadi.sk/i/BuXyM3503H9tUu
для реальных пацанов, мой кашиль яндекс 410011482427710
-
This is capain's circuit in a more clear form.
I'd like to ask Captainloz about the output transformer TT00. Do you have any info about that? Core, turns etc.
Thanks
Hi, The TT00 is just a little 220V to 12V transformer iron core. It's supposed to run at 50HZ It doesn't work in the circuit because the HZ is way too high.
-
Hi capainloz. Sorry to hear you have been getting messed around by this Maxim Aliyev guy.
Not cool that he has stopped responding to your emails. Hope he does get back in touch with
you. Yeah, that story they gave you about the coils you have only working at the equator sure
sounds like a crock since they seem to be in the Ukraine. That's a bummer.
Thanks for showing that Рома Гриц (Roma Grits) schematic in your latest video. As justawatt mentioned,
it would be interesting to know at what link you found that schematic. I guess maybe it was at the Russian
realstrannik.ru forum or similar.
I am attaching the Рома Гриц (Roma Grits) schematic which I screen captured from your third
Maxim Aliyev video. There are people here who might be able to help translate this schematic
to maybe make it easier to follow for non-Russian readers.
Thanks Void! At this point I just need to wait and see if anyone comes forward that has had the same experience. Or if Maxim responds, I sent him a link to the videos. I have a couple of other videos on this device I should upload because it does look like energy gain but I'm not sure. Bottom line is I was supposed to get a working device 100% guaranteed!! Well that was a lie! So everything else probably is as well. I'm a big boy I knew there was a chance this could be fake. ;) I was trying to take a short cut! ;D I'm really surprised at this thread because there is nothing so far to indicate Maxim is anything but a scammer.
-
Hi captainloz. Welcome to the forum by the way. Thanks for posting those docs.
I will have a look through them. Yes, there are a lot of schematics posted to various forums,
so it is really hard to tell which if any of them may be for legit OU devices. Yes, the Roma Gric and
Maxim Aliyev devices appear to have a lot of similarities. Both could well be scams though unfortunately.
Both of those two guys (probably not their real names) seem to be based in Ukraine, so they possibly
could be connected to each other.
Yes, you may want to hold off on damaging the coils for at least a while, and if you do eventually
take them apart it would be good if you could try to do it in a way that allows you to see exactly how
the coils are wound and connected internally, etc. without damaging the coils if possible; but that is probably
pretty hard to do if the tubes are filled with epoxy or resin.
Something to consider if you don't hear back from this 'Maxim Aliyev' guy, is to send him another
email and tell him that if he doesn't start responding to you and providing some explanations of what
is going on that you will lodge a formal complaint against him with the Ukraine National Police, and that
you will provide the Ukraine National Police with his email address, the bank account number and the name
that you transferred the money to, and inform the police that you have been scammed by that person or persons.
That might get 'Maxim Aliyev's' attention, although he/they will likely just try to give you more run around if they are scammers,
which it seems they are. If they don't respond in a reasonable way to your satisfaction, then I would go ahead and
report them to the Ukraine National Police. You could email the Ukraine Police in English and also include a Google Translation
of your text in Ukrainian as well. I don't know if the police there would do anything about it, but they might.
Ukraine National Police
https://www.npu.gov.ua/en/publish/article/340690 (https://www.npu.gov.ua/en/publish/article/340690)
Contact information:
e-mail: info@police.gov.ua
Postal address:
10 Bohomoltsa Street
Kyiv 01601, Ukraine
Phone:
(044) 256-0333;
Fax:
(044) 256-1633;
Thanks Void! I was thinking the same regarding the coils. I may do that regarding the Police as well. I'll let this play out for a bit longer. I know I'm not getting my money back but if I can make his life a little difficult, why not!
-
Thanks Void! At this point I just need to wait and see if anyone comes forward that has had the same experience. Or if Maxim responds, I sent him a link to the videos. I have a couple of other videos on this device I should upload because it does look like energy gain but I'm not sure. Bottom line is I was supposed to get a working device 100% guaranteed!! Well that was a lie! So everything else probably is as well. I'm a big boy I knew there was a chance this could be fake. ;) I was trying to take a short cut! ;D I'm really surprised at this thread because there is nothing so far to indicate Maxim is anything but a scammer.
Yeah amigo, from your description it sure looks like this guy is a scammer.
That may well be the case for the 'Roma Gric' guy as well.
Yes, you paid for a working device, and if the device was legit and if the guy was at all honest
he would no doubt be trying to help you to get it working. Instead it seems he just stopped
responding to you. Also that story he gave you about the coils 'only working at the equator' just doesn't
make any sense at all, so yes, sure looks like he's a scammer.
I think some people are still holding out some hope that the 'Roma Gric' device may be legit, but
I am inclined to think he is probably a scammer as well. I hope 'Maxim Aliyev' does get back to you,
but I would definitely report him to the Ukraine police if he doesn't get back to you soon and start taking
some real steps to honor what he was supposed to provide you with, which is a working OU device. The Ukraine
police may not do anything much, but you never know. Since you have the bank account # and the name associated
with that bank account, the Ukraine police may well be able to track him down if they are interested in looking into it.
-
Hi, The TT00 is just a little 220V to 12V transformer iron core. It's supposed to run at 50HZ It doesn't work in the circuit because the HZ is way too high.
Captain Hi the device is interesting and i'm sorry for your financial lose, really. I have been studying your diagrams and find most interesting especially around the TP1 assembly the ferrite stick appears to be made from ferrite rings (pic from one of his other vids) on yet another vid (the farm yard) it's possible to see the carrier wave length on the electric fire element.
Suppose who ever supplied your device didn't exactly know what they were doing ? So many mistakes (the iron core the inadequate L5 driver ect.
I'm still trying to work out the L2 winding ?
Regards AG
-
Hi, The TT00 is just a little 220V to 12V transformer iron core. It's supposed to run at 50HZ It doesn't work in the circuit because the HZ is way too high.
Thanks Captain
Normally at least one of the two long coils as AG said contains a ferrite core so to bring the frequency down. As far as i know, iron cores have to be used in the range of up to about 1KHz if we are to feed them with current. It would be great if you could measure the inductance of your long coils so to take a general idea of what happens inside their cores.
ps. I am sorry too for your money loss mate. I hope that he is not a scam and at the end you will be able to work this device.
-
In addition you can build the device according the drawing and see what frequencies flow inside the contraption at several points. If you are willing to make some tests we are here to help you.
ps. I would start by finding the self resonant frequency of your small iron transformer. Obviously and this is the topic, we are talking about high frequency currents. Only wire length counts.
Forget what i told you about the 1 KHz. It doesn't fit here.
Regards
-
one thing you must realize on this thread is there are so far 2 different devices with entirely different builds one we have no winding details for and another from the Russian forum that could be replicated if you can understand how to wind L2 assuming it is a winding ?
Regarding the Captains device if I was him I would be trying to down tune the VFO oscillator so the wave peeks coincided with the secondary coil placements on the larger winding stick and seeing what happens to the secondary winding outputs. Also shouldn't the transformer supplying the volt supply be a 240v - DC converter module or d did your component supply'r expect you to run the Transformer of the grid ?
Just thought I would add this section on this post HAVE YOU READ IT ??? i REALY THINK YOU SHOULD !!!
i KNOW ITS IN RUSSIAN IF YOU KNOW ANYTHING ABOUT THE Nazi GLOCKENSPIEL THIS WORKS ON THE SAME PRINCIPLE 8) 8) 8) 8) 8) 8) AND HAS THE SAME INGREDIENTS !!! DON'T SAY i DIN'T WARN YOU !!!
AG
-
Hey you guys from the Russian forum. please note in this video. Around the time at 12.40. The pipe is empty as the head of Winnie the Pooh.
https://www.youtube.com/watch?v=xP0emKe_il4&t=684s
-
L3/. coil (green color) ferrite (ferrite undergone extensions below) spindle rod 250mm, diameter 20mm winding 770 turns opposing arrows 0.3mm
In the center there must be a hole drilling depth from above 200mm hole diameter 10mm.
At the top, the thread has to be tapered with ferrite. The parameters of mercury are poured into the hole, mercury is smeared with wax and color, and the bolt is attached to the ferrite. The tapered thread does not allow mercury and water to pass through it.
ect ect ect
-
Here you go. Check out this video- https://www.youtube.com/watch?v=JoKshiv7k_0&t=189s
Hi :)
Another sad story...
Well, in the case of the money - In your place I would just send flight tickets and arrange visa to author of that contraption for assembling and tuning everything in your place instead. Othewise it is just the waste of money and time.
The devices which require air and ground to work have to be tuned to exact conditions and place. Impossible to do remotely!
Cheers!
-
i have send him mail with the circuit sold by Roma ,he told that is not his circuit.
I have asked him about the circuit captainloz got ,waiting for reply.
captainloz lets wait ,he thinks he sold the circuit to me ,he is replying lets wait and see how it plays out.
-
i tried to redarw the circuit from the maxim video maximum i can . i think what ever components captainloz got is correct.And almost the circuit is correct by 75%. Except for the second coil wiring. according to hand drawn he received. he rearranged the components there.
-
maybe it's him? https://youtu.be/n8m9l4TQgrc
very similar to antenna EH device
-
maybe it's him? https://youtu.be/n8m9l4TQgrc
very similar to antenna EH device
the guy in your video looks a bit like Allex guy ;) I do hope it's not!!
Any way the way to start with the katcher is wired up makes it electronic it will never work, electrons electronics electrical = losses. Tesla found that out with his experiments.
-
captainloz how many turns contain the coils on the secondary coil of the Kacher? I have in mind 5 to 6 and 7 to 8, and also the coil denoted by 1,2,3,4 ?
and in which direction coiled?
p.s. there is some idea here in this schematic diagram but i do not know, maybe it's about mixing "эжа" and "ужа" (I mean U and I - Voltage and Current)?
I apply an original message from Kapanadze:
1. grounding in the circuit is mandatory
2. spark in schematic mandatory
3. to start the process are necessary phase and zero (from the network or from an inverter) and the Current component is amplified (moreover impulsively just like "Pulse Current component Amplifier") (the so-called Current Amplifier) which is uncomfortable because are necessary expensive converters and etc...
-
Hi, the original poster,
First of all, lets make it clear. I am totally not interested in this circuit.
Out of curiosity, I would like to ask one question. Have you ever tried to place the coils on the ground rather than on the table?
The coils from these guy will not work at RF frequencies at kilohertz range or above. It seems that they are ready to be buried underneath the ground. (I am just joking :) ). When he said it would work better on the equator, this device is unlikely a closed system having no interaction with the energy external to the device.
-
captainloz note the possibility of wrong connection of the capacitor terminals. You better measure with the digital multimeter!
and see this https://www.eevblog.com/forum/projects/which-terminal-of-this-old-frolyt-electrolytic-capacitor-is-which/
-
I was approached by captainloz.
At my video https://www.youtube.com/watch?v=dCfTLUjuV9E&t=4s (https://www.youtube.com/watch?v=dCfTLUjuV9E&t=4s) I said specifically that I'm willing to visit Ukraine in very next day.
I have said that I'm willing to find person responsible for questionable video.
I have said that I'm willing to spend even more money that captainloz have spend . I have also named the number 15 shtuk and that is 3x times more than captainloz loss.
I said that I can activate my contacts in Ukraine for mentioned by reason.
I also stated in my conversation with captainloz that my action is free from any obligation to captainloz.
All of the expenses are on my own.
What I did not say is that the reason of my trip has much more meaning than just finding "Aliev"
That is also important from the perspective of
Denis Dniester ( Adrian Guska) accusation,
Ruslan from Riga accusation,
Overunity forum flooding by Russian Trolls
Involvement of Russian Spec in discrediting achievement or any achievement of community and its prominent leaders ,
before Russian Tzar election in march of 2018
The newly established by Russian Tzar date of election -that is also the date of Russian annexation of Ukrainian Territory Crimea.
I have ask captainloz for:
-documents
-information collected
-evidence of money send to Ukraine.
So what do we have now.:
The time frame I was able to track the guy from Ukraine " Aliev" has already past .
The address that was given to me by captainloz was checked by Ukrainian interested in case.
And 'I have plenty of unanswered Questions.....
Very strange questions ...........
I have never been in "Ukraine but I feel there as if I was one of them.
I speak the language and can behave like one of them.
There is no way for anyone to even think that I'm not Ukrainian.
No documents or evidence was presented to me by captainloz.
However I have ask captainloz to provide me with necessary material for my trip many times.
Instead in the next few emails "I was told that captainloz does not want to further continue the hunt for suspected scammer from Ukraine.
I was also denied to talk to captainloz for personal reasons.
I did respect decision of captainloz.
I have had close to 100% chance to catch the guy.
So how that is being typically done over there:
Simple bribe given by "someone" to that very cashier in that financial institution who was handling money to the suspect , would "possibly" give to that person
all of information and copy of ID of person of interest (the receiver) + photo taken from camera of that suspect.
As strange as it sounds - That is enough for police, or higher level of law enforcement to hunt the guy, in that country , bribe helps a lot or even it is main key to success.
However I never said here that I would operate with such methods :) ................. No.... not me......... :)
Person who send the package from Ukraine, could be screened as well for connections to the suspect. or bribed by someone interested in finding "Aliev"
At the end, all of that informal ways, place this guy into the formal system ..whatever it means :)
Anything and everything could be found there .
Summary:
I was disappointed by cooperation with captainloz especially when
I already contacted my sources in Kiev and designated funds for the trip.
Facts:
-For the past 2 years I was ask few times to contact Stefan to remove some Russian individuals trolling overunity forum
-I was visited at my home by three Venezuelans( two young man and one woman) and "kindly" ask to stop publishing my revelation because someone might start to believe that I have it.. and accidents happens ..
after unauthorized use of camera I told them that my security system has got them all.
So they moved out in hurry and I was surprised how fast they are.
-I was constantly attacked in many ways by Russian "people of interests"
After my contact with captainloz I found that Russian database about me for some strange reason rapidly increased
Simple stupid mistakes they make just because many of them does not know reality of western life and its behavioral activities.
So lets say that it was just coincidence.
I was shocked how sophisticated and expensive methods Russians use as well as their persistence to fulfill expectation of their bosses.
-Attack by Russian on Ruslan early this year :
Russian citizen illegally residing in Lithuania purchased Ruslan device for 5K and device does not work... however the device was witnessed by the buyer in time of payment ,and conformed as working.
Than along with another Russian start to publish videos expressing their disappointment. When I publicly stated that I'm willing to compensate for buyer 5k becouse he was crying that he has now no money to support his family
both of Russians told me in public conversation that they do not need my money , they want court and justice.
Number of other Russian individuals started to produce videos condemning Ruslan.
So that what is significant here is that price range was set and than any other "inventor" including "Aliev" is holding to that.
- Attack on "Denis Dniester."
After I published device of Denis Dniester I spoke to him over the skype I was planing visit to his small town.
...and just few days later I called him and I looked at him, he was so much scarred that he could even hide it.
I assumed, he was not alone in his room , looking nervously behind the screen, and after some "unrelated " sound activity in the room, over sudden he ask me how much money I'm willing to pay him for his device.
He knew my position already from the previous conversation so this was for me Red Alert.
My answer was I do not sale or buy anything however I have no problem with people who are much more fortunate than me :)
After short time Denis response was expressed as a the demand to immediately remove few of his videos, so I did.
Just few days after that Denis stated publicly on forums that everything he did was just a joke and there is no FE.
His explanation of how the "joke " was done was out of any sense. Just ridiculous approach to undo whatever was done.
- Attack on "Akula"
Akula was constantly attacked by Russians ( he is from Kazakhstan) so more than one instance to describe here takes to much space.
Note wording used in this post must be understand as:
Russians means certain Russians with certain interest or connection to the subject discussed.
-Dragons' Lord
in FE world - is one of the individuals who have power to remove entire conversation from any channel including owner of youtube channel remarks.That happened to me too.
So question would be what kind of Russian can have so much power over American Youtube.
Some more information:
Due to Russian tzar incoming election there is thousands of video complains standing about Russian office of YouTube in Moscow and St Petersburg being corrupted and Trolls able to manipulate with likes , dislikes, comments to affect algorithm responsible for your rating
Mostly applied to Russian opposition but lately to FE community. Russian trolls uses VPN to mimic other countries than Russia so let's say My video is in Russian but I get dislikes from Austria or Bangladesh.
https://www.youtube.com/watch?v=DZwAVsAgsLQ (https://www.youtube.com/watch?v=DZwAVsAgsLQ)
That happened to me to.
Periodically I have large number of people subscribing to my channel in just one day or so....and after my next video they unsubscribe than YouTube algorithm is affecting me.
That is typical tactics of Russian Trolls so YouTube cuts promotion of other videos in the channel.
Number of likes on my videos is disappearing and some of subscribers complains to me about impossibility to mark video as Like.
Another words number of views on my channel is cut to about 10%
Bottom line is:
With full respect to captainloz
Your credibility looks OK just because you are 8 years on youtube.
Your devices are absolute beauty in terms of mechanical and electrical assembly.
And that is about all I can find nothing more.
I wish you had nothing against of conversation with the person who wanted to help you and go to Ukraine for your money to recover,
but I respect your statement that you are very conservative person who do not use skype or any other kind of social media at all.
You my friends are free to interpret this testimony on your own
given to you by me,- the person who was poisoned by some Russian's on my way to Tariel. https://youtu.be/Uugr-ElDoMk?t=134 (https://youtu.be/Uugr-ElDoMk?t=134)
And this was an effect of the poison:
https://youtu.be/Uugr-ElDoMk?t=928 (https://youtu.be/Uugr-ElDoMk?t=928)
Tariel just touched the food and said I can not eat it.
So I ate much more.. After I start to lose my balance, I went to the bathroom looking in the mirror and saying to myself.
I wanted to save the world, and now I must save myself. so I did with the help of two fingers
Wesley
-
Wesley,
Nie przyszło Ci do głowy, że ten captainloz nie chce zadymy ? Może ma rodzinę i po Twoich dzianiach ktoś zapuka do niego bo nie wiadomo kto za tym stoi. Bronisz wschodu bo wierzysz, że mają moc tym czasem jedyne co robią wiarygodnie to wyłudzają dziengi. Dlaczego kapitan dostał w takiej postaci przesyłkę? schematy z błędami na kolanie robione. Podzespoły ze śmietnika. Po to aby zwalić winę na klienta , że nie umie tego złożyć. Kapitan jak widzisz bardzo starannie to poskładał myśląc, że to będzie działać i nie chciał uszkodzić czegokolwiek chyba to widać po jego filmach. Każdy z tych gości powinien już dawno zniknąć albo być bardziej zamożny niż widać. Tymczasem nic takiego nie widać. Zgodzę się tylko z jedną teorią, że to działa, a gość kapitan jest trollem tak jak ja mogę być w twoich oczach, a Ty w moich. Na pewno już wiesz na jakiej zasadzie działają te urządzenia. To jest jedno i to samo zjawisko które występuje licznie w każdym urządzeniu elektronicznym z lat temu, nieprawdaż. Dlatego nie można tego opatentować bo to ma już patent, a to co jest robione to jest właśnie to urządzenia tylko nieznacznie zmodyfikowane choć w innych wersjach dla hv jest bardzo podobne.
Co chcesz osiągnąć ?
Nie widzisz, że to jest to samo dla wszystkich wersji wszystkich panów których wymieniłeś, nie pytam, stwierdzam. Gdyby to byli tylko oni bym był sceptykiem ...
It did not occur to you that this captainloz does not want to commit? Maybe he has a family and after your knocking someone knocks on him because you do not know who is behind this. You defend the east because you believe that they have the power of this time, the only thing they do credibly is to scam the days. Why did the captain receive a parcel in this form? diagrams with errors on the knee made. Components from the garbage bin. In order to blame the client for not being able to submit it. The captain, as you can see very carefully, put it together thinking that it will work and he did not want to damage anything that you can see from his films. Each of these guests should have long disappeared or be more affluent than you can see. Meanwhile, nothing
you can not see it. I will agree only with one theory that it works, and the captain's guest is a troll like I can be in your eyes, and you in mine. For sure you already know how these devices work. This is one and the same phenomenon that occurs numerically in every electronic device from years ago, is not it. Therefore, you can not patent it because it already has a patent, and what is being done is just devices that are slightly modified but in other versions for hv is very similar.
What do you want to achieve ?
You do not see that this is the same for all versions of all the masters you mentioned, I do not ask, I say. If it were only they would be a skeptic ...
-
Najlepszą metodą ukrycia prawdy jest zniechęcenie do jej poszukiwania. :)
-
Najlepszą metodą ukrycia prawdy jest zniechęcenie do jej poszukiwania. :)
Myślisz, że ten kapitan kupił od gościa te urządzenie i wciska innym, że nie działa ? Jedyny kupił ? gdzie są inni? kupili, złożyli, działa i siedzą cicho bo specsyf im przez okienko patrzy.
Najwyraźniej są tacy którzy zwąchali interes na naiwnych. U nas to są garnki, pościel, złoto, teraz już i diamenty oferować zaczęli na tajnych ekskluzywnych spotkaniach. Co nie znaczy, że reszta robi to samo.
Do you think this captain bought this device from a guest and pushes others that it does not work? The only one he bought? where are the others? they bought, folded, worked and sat quietly because they were watching through the window.
Apparently there are those who have sniffed the naive business. With us, they are pots, bedding, gold, and now offer diamonds at secret exclusive meetings. Which does not mean that the rest does the same.
-
Hi,
May I ask you guys to at least to use Google translate from Polish to English then have converstion in English here? Thanks.
Also as I highlighted before, the selling of those devices without re-tuning it completely in destination place is basically the selling of non-working device.
From the components which I recognized in this case, it is based on electricity from Air and using electrostatic charges infusion into circuit from air and earth ground. Which makes power amplification in all similar devices...
Even if components are from scrap yard the power amplification effect the device is after is in the coils and their interaction with ambient. Also there are ways do it in much more simple way as soon you gain knowledge how the power can be amplified. Which is basically all about injecting particles from ambient (in the plasma state - ionization) into circuit over way of polarization and attraction to capacitive open circuit.
Cheers!
-
Also there are ways do it in much more simple way as soon you gain knowledge how the power can be amplified. Which is basically all about injecting particles from ambient (in the plasma state - ionization) into circuit over way of polarization and attraction to capacitive open circuit.
You're right about that.
-
Wesley,
Nie przyszło Ci do głowy, że ten captaincy nie chce zadymy ? Może ma rodzinę i po Twoich dzianiach ktoś zapuka do niego bo nie wiadomo kto za tym stoi. B
Nie widzisz, że to jest to samo dla wszystkich wersji wszystkich panów których wymieniłeś, nie pytam, stwierdzam. Gdyby to byli tylko oni bym był sceptykiem ...
It did not occur to you that this captainloz does not want to commit? Maybe he has a family and after your knocking someone knocks on him because you do not know who is behind this.
Nie nie mysle tak.
"Ruskie" mnie o malo nie ukatrupili ciagle mnie szpieguja i pomogli Wenezuelczykom mnie zalesc. Co prawda schrzanili robote bo to "Ruskie"...zaplacisz wiecej i nawet dowiesz sie kto dal trucizne i kto zamowil.
Captainloz sam do mnie przyszedl po pomoc , ale juz zaraz po moim wideo dowiedzialem sie ze nie uzywa zadnych media i skype tez.... i ze on jest mlody ...ale starodawny w manierach .
To co..?...
To...ja sam od siebie decyduje sie wylozyc 15 klockow bo jakis tam "amerykas" "stracil" piatke?
a gosciu nawet twarzy nie moze pokazac w skajpie.. tak? ??
I juz mu nagle nie zalezy na moim wyjezdze,nie daje adresow, kont, dowodow przesylki kasy, wystartczylo by zeby dac kasjerce w lape zielonego tysiaka i masz wszystkie dowody adresy i fotki. Oczywiscie ja nigdy takich metod bym nie uzyl.. no no no.. Ja tam wszystko zgodnie z prawem :)
To tak wyglada jak by moje wideo bylo wszystkim co mu trzeba... albo tez wszystkim co od niego oczekiwali...
no nie wszystko.. dostal mojego majla ktorego nikt nie znal. I dwa tygodnie pozniej nagle zaklikal do mnie gosc , ktory kuzwa nawet nie kuma po ang. ale kombinuje jak pies pod gorke zagadac o FE. {"{ruski" jak w morde ....i tyle no i skad ma majla?}
Moglem za jaja zlapac tego Alieva znam metody i umiem sie nimi poslugiwac .
Nota: slowo "Ruskie" oznacza poprostu niektore ruskie a nie wszystkie ruskie.
I jest to slowo ktore uzywam do artykulacji mojego wlasnego zdania w tej kwestii zgodnie z obowiazujacym prawem w moim kraju.
Wszystko co jest tutaj powiedziane jest ekspresyjna forma wyrazenia mojej wlasnej opini i moze nie odpowiadac realnosci faktow lub byc nie w zgodzie z opinia innych ludzi w tej kwestii.
The bottom line is that I responded to captainloz PM, and my offer to help, was cut short by captainloz just right after my video stating that help will be given at no cost to captainloz.
I offered in my video - up to 15k to be spend from my own money , to bring suspected individual to justice. And that is 3x more than losses of captainloz.
And I expressed in Russian language ,that I can be in Ukraine very next day.
In Ukraine I'm like fish in the water. I can blend and become invisible.
So what do we have now is similar to Ruslan, and Akula slam , To the surprise to all of you it was now done forcefully and loudly by me
And now many of you may think that all FE devices might be just one big Fake.
Isn't that what Russian Tzar want just before his fourth election?
Isn't that what Russian Tzar is afraid of?
If for some strange reason that was just some real way to create FE that works ... than Tzar is simply no longer the tzar in effect of that.
Tzar army of spies and murderers can not control and shut down internet.
And you may be not aware of the fact that due to opposition,sanctions,and corruption ,Tzar is acting in panic now right before the election Oil is 63% of Russian economy.
He is the Russian Tzar for 18 years now and he announced willingness to be for another 6 years.
Tzar advisors bend information delivered to the Tzar ,to get more money for their ( corrupted) operations .
I'm not accusing captainloz I'm just giving you my thoughts You judge it by yourself .
Wesley
note: All of comments posted by me are my own.and reflects my personal opinion only.
word "Russian" means some Russian at some point interacting with the story
Word Tzar in all of my comments -means just any Tzar, so if you find any Tzar somewhere that might be very interesting phenomenon :)
All language used in all my comments is just a form of expression that can be understood in many different ways.
I was not born with English language so some statements in all of my comments might be improperly articulated or expressed due to the language barrier difficulties . :)
-
Próbuje zrozumieć to po swojemu i bez żadnych nacisków. Czasami ludzie zmieniają zdanie i Ci o tym nie powiedzą. Może jest tak, że kapitan uruchomił urządzenie i też by nie chciał mówić że to prawda. Prawda ?
He tries to understand it in his own way and without any pressure. Sometimes people change their minds and they will not tell you why. Maybe the captain started the device and he would not say it was true. Truth ?
-
I emailed this 'Maxim Aliyev' guy (most probably not his real name) back in October
after hearing captainloz's story and I asked 'Maxim' if he was still selling his devices. I did not
mention to 'Maxim' that I knew what had happened to captainloz. 'Maxim' replied back to
me that he would sell me a 5000W unit for $1500 USD. I exchanged a bunch of emails back
and forth with 'Maxim', and basically this 'Maxim' guy gave me the exact same name and
arrangement details of where and how to send him the money which captainloz had previously
stated 'Maxim' gave to him as well. The guy 'Maxim' appears to be located in Kyiv, Ukraine.
When I asked 'Maxim' via email to explain what had happened with captainloz, 'Maxim' denied
that he had received any money from captainloz or that he sent anything to captainloz, however
captainloz has a photo of the name and address from the package return address which 'Maxim'
had sent to him from Ukraine. That photo of the name and address from the package which captainloz
received from Ukraine is the same name which 'Maxim' gave to me via email as well.
Even though I was already convinced that 'Maxim' is a scammer because of what he has done to
captainloz, I asked 'Maxim' if he would be willing to allow someone to meet with him somewhere
so they could confirm in person whether his device is real or not. I pointed out that Kapanadze and
Akula had allowed people to view their devices in person. 'Maxim' refused and made the excuse along
the lines that he would be dead if he did that. As I told captainloz, from everything I have seen, this
guy 'Maxim' appears to either have serious mental problems or he is just a common low life scammer.
It seems he will say anything to try to get money from people, and he took a large sum of money from
captainloz and the device parts which he sent to captainloz do not work, and 'Maxim' gave captainloz
a ridiculous excuse that the coil he sent to captainloz 'only works at the equator', and then left him high and dry.
He took more money from captainloz and promised to send captainloz a working 5kW coil assembly, which
captainloz has never received.
As I said, based on everything including my email exchange with 'Maxim', 'Maxim' seems to either have serious
mental problems or he is just a common scammer. Most probably he is just a low life scammer.
Wesley, Captainloz sent you a photo of the name and address that 'Maxim' listed as the return address on the package he sent to captainloz.
Captainloz said he didn't want to waste further time on it. Your veiled accusations against
captainloz are contrary to all the actual evidence, which you are already fully aware of.
If you want Captainloz to send you some receipts from the money transfers he made to 'Maxim',
then email him again and ask him directly if he is willing to send you those payment receipts or not.
All the best...
-
Wesley, Captainloz sent you a photo of the name and address that 'Maxim' listed as the return address on the package he sent to captainloz.
Captainloz said he didn't want to waste further time on it. Your veiled accusations against
captainloz are contrary to all the actual evidence, which you are already fully aware of.
If you want Captainloz to send you some receipts from the money transfers he made to 'Maxim',
then email him again and ask him directly if he is willing to send you those payment receipts or not.
All the best...
My DEAR FRIEND I did ask for banking prove of transfer many times as you know it , I did that also in my video .https://youtu.be/dCfTLUjuV9E?t=848 (https://youtu.be/dCfTLUjuV9E?t=848)
That was critical for me to find the guy .
Being able to see the face of a person who was targeted by Maxim prior to my trip to Ukraine , was also important and I was told that man of the young age can not do that as he does not use any Facebook or any other social media.
I was able to find the guy with almost hundred percent of certainty .I know how to do it.
I'm not judging Captainloz and I'm not accusing him. I just posted all of the historical facts about mentioned events as they happened- at best of my personal understanding of them .
I left all of that information to you The People for your own interpretation .
The address given on package was already very carefully checked using all resurses possible by my Ukrainian friends.
This address has no relation to Maxim case.
I have explained already how things works in Ukraine.
It was the guy who named himself "Maxim" and that might be the window for some others to use it for the reason of diminishing Western World attention to FE devices.
And by that minimize chance of other experimenters from Russia to sale their devices as West is the one who has money .
It is evident that Russian Troll factory has a lot of interest,resources and government support ( one of them is at 10 Savushkina street in Moscow.)
So I also do not defend Maxim, but what I see here is inconsistency of motion .
Another words there is certain time frame to get to the train if you are on the train station After that... it is over , the train already left the station.
Wesley
note: All of comments posted by me are my own.and reflects my personal opinion only.
word "Russian" means some Russian at some point interacting with the story
Word Tzar in all of my comments -means just any Tzar, so if you find any Tzar somewhere that might be very interesting phenomenon :)
All language used in all my comments is just a form of expression that can be understood in many different ways.
I was not born with English language so some statements in all of my comments might be improperly articulated or expressed due to the language barrier difficulties . :)
-
Hi Wesley. Captainloz did say he didn't want to waste any more time on it.
My suggestion is to contact captainloz directly via email if you want any further clarification.
I have no doubt that what captainloz said is accurate, as this 'Maxim' guy sent me the exact same
name and details for sending him money which captainloz had said 'Maxim' had sent him as well.
Captainloz tried really hard to get that device to work, and as can be seen from his videos
he spent further money on other parts to make his build. He is out a lot of money and time spent on it,
and when captainloz emails 'Maxim' he just gets more lame excuses and/or more runaround, or 'Maxim'
just ignores his emails.
People should take warning that people who try to sell 'free energy devices' or 'plans' over the internet
like that are pretty much certainly scammers. If they really have a working OU device and
they want to make money, they should be able to sell their device rights for a large amount of money to some big
corporation or whatever. They wouldn't have to try to hawk their devices one at a time to individuals over the internet
where people could reverse engineer them and then their 'secret' would likely be quickly revealed.
All the best...
-
Please read carefully my previous post one more time.
I agree that Maxim might be self acting scammer and not a part of carefully planed, Russian Troll factory operation
I agree it is possible that captainloz was simply tired with all of this.
I agree captainloz may be just old fashion young individual who does not use social media. (Would you wish to do not talk to the guy who invest his 15k into your problem asking nothing in exchange? would you Void?)
I also lost the chance to see at the same time during that trip :
Delamorto, Denis Dniester ( Adrian Guska), Ruslan and My friend Dr Hans from Germany, and after that decide is there reasonable chance to affect the Tzar big time.
I just pointed in all of my posts on that what I knew.
Wesley
note: All of comments posted by me are my own.and reflects my personal opinion only.
word "Russian" means some Russian at some point interacting with the story
Word Tzar in all of my comments -means just any Tzar, so if you find any Tzar somewhere that might be very interesting phenomenon :)
All language used in all my comments is just a form of expression that can be understood in many different ways.
I was not born with English language so some statements in all of my comments might be improperly articulated or expressed due to the language barrier difficulties . :)
-
Spytajcie siebie komu zależy aby te urządzenia nie ujrzały światła dziennego. Przy miliardach zysków z gazu , ropy itp parę milionów aby opłacić ludzi którzy rozpowszechniają cudowne urządzenia (które nie działają) - to najlepsza metoda aby przekonać wszystkich że nie ma innego wyjścia jak spalać paliwa kopalne.
-
Hi Guys,
I know I said I don't want to waste anymore time on this experiment, however I just uploaded a new video. https://www.youtube.com/watch?v=NbqdbScK1D0
I just don't understand why so much effort went into making the coils and also trying to hide how they were made?
Obviously I need to do much more testing now! I just wanted to be fully transparent because I don't want to be the one that killed this device for everyone just because it didn't work for me. I did find one broken wire and possibly another one as well. Sliding the L1 coil has a huge impact on the circuit, in regard to frequency and voltage. Maybe everything has to be just right to get some output? I'm not so sure this was a scam in the beginning.. it ended up as one that's for sure. After I received these coils I send him another $2000 for the 5000watt coils which I never received.
I just see a lot of work making the coils he sent me. I just don't get why so much effort was put into it?
The 2 pick up coils on the Tesla coil are 30 turns of aluminum wire. Aluminum likes positrons! All other coils are copper.
-
@captainloz,
The effort you see in coils winding most likely was ment for working device. But because the working state of device is fixed to location it had to be re-tuned for your place. This is due different air and ground conditions for ionization requirements and resistance from Earth ground. And from the theory I got from people who are working with such devices the mondus-operandi is about injecting free ions and electrons into output and charging coils like capacitors with them for output current amplification.
Cheers!
-
@T-1000
Which means the device could be a real road map to harvesting usable electrons. So the goal is to Tune for my location. I'm not sure how to do it yet but maybe it's possible now I have the coils accessible.
This is the email I received from Maxim after I told him it didn't work. He said I should buy the 5000watt unit because it works everywhere. I did send the money for it but he never sent it to me....
Добрый день!
есть проблема
я человеку отослал такое же устройство и такая же ситуация
почему то на стенде оно работает
а включаю за городом не работает и самое интересное, что те установки которые от 5 киловатт работают везде
а вот ниже не работают высокая чистота то есть у заземления ни хватает сопротивление что бы выравнять чистоту
я пробовал сегодня исправить но пока без результатно !
предлагаю или вам ждать или решаем на 5 киловатт
вам нужно будет выслать мне катушки обратно!
-
@T-1000
Добрый день!
есть проблема
я человеку отослал такое же устройство и такая же ситуация
почему то на стенде оно работает
а включаю за городом не работает и самое интересное, что те установки которые от 5 киловатт работают везде
а вот ниже не работают высокая чистота то есть у заземления ни хватает сопротивление что бы выравнять чистоту
я пробовал сегодня исправить но пока без результатно !
предлагаю или вам ждать или решаем на 5 киловатт
вам нужно будет выслать мне катушки обратно!
Translation:
"Good day,
There is problem
I did sent to another guy same device and there is same situation
For some reason it works when presented
I am turning it on outside of city and it does not work, the most interesting part is, these are 5kw devices which work everythere
The less powerfull devices do not work due too high frequency, which mean for grounding the resistance is not enought for stabilising frequency
I did try to fix this today but without results so far!
I suggest to wait or we resolve it with 5kw device
You will need to send coils back to me!
"
As I suspected in my previous post... Just interesting it was suprise for the author of device which should be clear from begining about fixed location tuning.
P.S> The X-Ray images of the coil might be usefull to guess how winding was made. Which would help to re-create full circuit when trying to understand how coil configurations are made.
Cheers!
-
@T-1000
Thanks for the translation. Much better than google!
I'm not sure how I can get an X-ray done. I'll look into it though. It would really help.
-
I don't suppose you asked the guy for references ? or went out to see the device working ?
As an after thought did you actually return the coils ?
-
The coils were sent from the Ukraine, I'm in California. I never planned to go and see the device working in person. I just went from the video that was posted on Youtube.
I told Maxim I would send the coils back after he sent me the new coils. However he never sent the new coils.
The original deal was $2800 for a 2800 watt device. I figured it was worth the risk. Then after I spent a lot of money/time/effort building and troubleshooting the device, with no results. Maxim told me to send another $2000 for a 5000 watt device (it was suppose to work everywhere). He actually promised me a 6500 watt device for all the trouble I'd gone through. I then flipped a coin to decide on sending the money. It was heads! So I sent the money![size=78%] Contact is not possible now, the email address for maxim is no longer active. [/size]
So then I figured I may as well open the coils up and that's what my latest video is about. I guess it's totally possible someone made the effort to build these coils just for a pay check. I just think it's strange they went to that much effort if it was just a scam. Maybe it wasn't much effort for whomever made them? I know it would have been a lot off effort for me...maybe that's where I'm going wrong here....?
There is no short cut! Back to the drawing board!
Can anyone point me in the direction of how to find the local frequency of the earth? Is there a meter or something you can stick in the ground that tell you the frequency of the earth?