Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Dr Ronald Stiffler SEC technology  (Read 278876 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #930 on: October 16, 2018, 06:02:22 PM »
   Gyula:
   As it seams that the Doc is now in the hibernation mode, and is not showing anything further on the ground lighting tests.
 
   So, I thought it would be good to do another video, showing what I've come up with concerning the "diode loop" tests, so far. 
   Gyula, please study my set up, and the ways it's wired up, and let me know if you think that the loop is obtaining both polarities from the sine wave. As I would like to know if I am tapping both sides of the wave form, or not.
  My latest video:  https://youtu.be/PVccRza8GYg
   Any comments are welcome, as always.                                                             
                                                             NickZ

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Dr Ronald Stiffler SEC technology
« Reply #931 on: October 16, 2018, 09:04:43 PM »
Nick,

Sorry but I do not understand your circuit: a schematic is needed how you connected the two coils and the two diode loops.
The circuit the Doc showed in his double loop schematic in his video entitled "Double Loop using the full Sine Wave" (at video time 3:15),  it has only one coil and it feeds the two diode loops via two separate coupling capacitors.

So if you followed his schematic then your double loop would surely work as he claimed i.e. utilizing the full sine wave.
But you have two coils, maybe you are driving the second coil via the first one and then the second one drives the two loops I do not know. 
But if you drive (from say the 2nd coil) the two loops via two separate capacitors as he did and you connected the two LED lamps in series as he did and the two positive loop outputs are connected together and the two negative loop outputs are also connected together, these two connections are to feed the series LEDs, then you should have utilized the full sine wave.  Otherwise, I do not know.  Please do not expect me to spend time and figure out or guess every detail just from your video:   make a correct schematic (if you wish).

Gyula

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #932 on: October 16, 2018, 11:43:39 PM »
   Ok, thanks for the reply.   The reason that I did it the way that I showed in the video, was because I could NOT make it work the way that the Doc had it on his diagram. Connecting the two led bulb in series, just kills the output. So, I came up with this other way to make it work.
   The crystal oscillator is the same as in the previous diagrams and videos that I had showed, no mayor changes to it.
   The first diode loop that is on the same PCB as the oscillator, is going to the left AC bulb, is also like I had shown previously in a video of the single diode loop.   The second diode loop is connected separately to the same transistor collector as the first diode loop is, and to a 102 cap then to the second L3 coil through it's diode loop.   Lets forget about the green ground wire, for now.   I had thought that my last video had explained it pretty well. I'm not good at diagrams, and I thought that you might be able to figure it out by looking at the video. If not, then don't worry about it. I'll figure it out, sooner or later.   It's been confusing, for me too. But, I think that I am getting both polarities, now, in any case.                                                                                                                                             NickZ


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #933 on: November 07, 2018, 10:37:45 PM »
   Guys:   I made this video (below) before I rewire the way that the two led bulbs are connected to the crystal oscillator.
   Although I could not make the two bulbs light, I think that it's worth doing a video about that, just in case someone may have an  idea of what might be wrong. My main objective was to try to obtain both polarities of the sine wave, instead of just one. But, the type of bulbs may be what is not allowing the juice to flow, as it should, or not. The input is about 25v, and the output at the bulbs is 69v.
   
   https://youtu.be/fAXamcfk06E

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Dr Ronald Stiffler SEC technology
« Reply #934 on: November 08, 2018, 09:52:40 AM »
Nick,

You say towards the end of your video that you have 48 LED's in series with 70V applied to the loop. This gives 1.45V per LED which is insuficient. You need around 2.4V or so across each LED to get good lighting, depending on the spec of the LED's used. Also you have volt drop across each of the series connected diodes which drops the voltage applied to the LED string even lower than 70V.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #935 on: November 08, 2018, 03:07:05 PM »
   Hoppy:   There is an actual increase of voltage as the Doc has mentioned with each additional diode placed into  the diode loop, not the other way around. As happens with the normal drop in voltage with diodes (0.7v), or so, due to the series connected diodes.
   However, I can light both led bulb fairly brightly as I had shown in a previous video, by using two L3 coils, and separating the two bulbs each with their own L3 coil connected to the crystal oscillator. So... the voltage is already high enough to see some fairly good light output. I also used just a 24 led single bulb, connected by TWO diode loops, and it would not light when connected that way, either.

   After the video, I replaced the two led bulbs with a single strand of led filaments from a gutted filament led bulb, and was also not able to light it, even though the output was over 103v with that set up.   I had shown a previous video lighting that same filament led bulb, on just a single diode loop.  So, there seams to be something wrong with my double diode loop or the way it's connected up. Yet, either of the individual loops work well on their own, when connected on just a single diode loop to each bulb.   I have spent some time on all of the above, but seam to be hung up on lighting the bulbs with the double diode loop, for some unknown reason.   As you can see, the oscillator can light both bulbs when using separate diode loops, pic below.
   I did NOT use a single small led between the two diode loops like in Itsu's pic below, but just a wire connection between the led bulbs.

mikrovolt

  • Newbie
  • *
  • Posts: 39
Re: Dr Ronald Stiffler SEC technology
« Reply #936 on: November 20, 2018, 01:50:22 AM »
As a general comment not pointed at anyone but regarding noise. I have been looking at constant current and clean power sources.
There was conversation years ago about Dr Stiffler's over all lab equipment was suspected to influence his results.
He discussed that he carefully went through his lab to account for grounding, common noise rejection, and the likes.

In this video from EEblog He does a good job of reviewing some of what I think might be concern with power supply enclosures, filtering
and procedures in finding the source of noise. That way someone can better compare the product of SEC exciter.
https://overunity.com/17249/dr-ronald-stiffler-sec-technology/930/

I think the crystal oscillator is very predictable when power source is battery or good PSU. The sec exciter has it's own
properties from that of a big signal generator it is easy to isolate some of those properties
and much advantage of powering efficient energy with the big SG unlike a much less sophisticated signal source.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #937 on: November 20, 2018, 06:15:58 AM »
   Agreed.   The use of a SG is a great tool, but it needs to be replaced at the end with a more practical and possibly more portable or light weigh solution.  Once the best resonant frequencies are known. Plus we need to look more deeply into just how much light is being produced, and at what actual cost.   
   I can already run my set up as a free energy device, by simply connecting the crystal oscillator and led bulbs up to a solar panel and battery. But, I'd really, really like to do away with the battery and panel, eventually, and have it self running. If it really can produce it's own energy, through the diode loop, etz, to run itself and produce some use able light as well.
    I have been able to light a single gutted AC 120v, 8.5w 24 led bulb, on BOTH diode loops now, (on both polarities, I think). And to a more use able but still somewhat limited degree, however, to a bit higher lumen level.
  There also seems to be various frequencies, (or what ever) that the device tends to auto tune itself too. Some of these syncs produce more bulb brightness than others, while yet the scope frequency readings stay the same, while these different tuning points are found. So, neither the oscillator nor the L3 coil output frequency changes, while different points are being tuned to. The crystal oscillator driver and L3 coil's outputs are rock steady, yet something does vary to produce different results with higher and lower bulb brightness. The higher the output the more unsteady the signal is, and harder to keep it from going out of tune.
But then it somehow will sync in, it kicks in, and become very stable, and hand movement don't affect it as much any more.
Keeping it there is another thing.   I've also noticed these devices are like ham radios that can work better to zero in on the station (or ambient energies) at certain times of the day, or night, than at other times. 
   More to come, I'm not done with this just yet.
                                                                       NickZ

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Dr Ronald Stiffler SEC technology
« Reply #938 on: November 20, 2018, 02:44:51 PM »
Hi Nick Z yes there are certain frequencies that appear to enhance output, did you by any chance record the frequencies that this happens in your geographic location?
Also, I have something that might interest you can I IM you with it as i don't want to compromise the other person if that's ok

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #939 on: November 20, 2018, 02:52:42 PM »
   My set up works best at 12MHz, but will work at several other different frequencies, also, although not as well as what the mentioned crystal can provide. However, my crystal oscillator and it's L3 coil output does not change from it's 12MHz frequency. It's rock solid at that frequency, as I mentioned.  And, yes, there are of course some frequencies that work better than others. That's where a SG, spectrum analyzer and scope help to find the best frequency. But, there is something else other than voltage and frequency going on here. That's what I'm looking into.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Dr Ronald Stiffler SEC technology
« Reply #940 on: November 20, 2018, 04:44:54 PM »
yes the one frequency that keeps cropping up is around 8hz ie no remainder when divided down 12/8 is a whole number
I assume its to do with the earth's resonant frequency if that's true or not, who knows.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #941 on: November 29, 2018, 03:51:04 PM »
   Hoppy, and AG:   Here is an older video posted by Dr. Stiffler.  It is showing what "special frequency" he is tuning his PSEC to. 
This is why he tunes the L3 coils, as well as the oscillator frequency to that particular frequency.
He is not sure just what causes that frequency pulse, but has tuned all his coils and oscillators to it, as it causes the highest peak.
   He now uses the 13.5MHz frequency, for that same reason, as far as I can tell.   https://youtu.be/MtphlQ85yg4

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #942 on: December 04, 2018, 07:26:09 PM »
   Guys:
   My latest video on YT;   https://youtu.be/BZsvtlA_Rgc
    The above video is about  another diode loop test, but this time with separate diode loops, and separate bulb connections.   Seams that the strongest, brightest lumen level is obtained from a single gutted 120v 8.5w led AC bulb, instead of using two bulbs. But, that might just the type of bulbs that I'm using, instead of using the recommended CREE led bulbs. But, they were a lot more expensive and harder to find exactly the ones that the Doc is using. Maybe it's not that important, but they may work better.    As my bulbs are only showing about 1/2 or less of the normal 800 lumen at 120v, I'm still trying to improve on their performance.
   

doktorsvet

  • Newbie
  • *
  • Posts: 21
Re: Dr Ronald Stiffler SEC technology
« Reply #943 on: December 05, 2018, 05:49:38 AM »
Hi NikZ!


Is there a Dr. Stifler scheme in the public domain?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #944 on: December 05, 2018, 04:13:24 PM »
   There are videos on youtube under Dr. Stiffler. 
   This thread is dealing with his work and ideas.
   You'll have to look at the Doc's videos if you want to find a diagram or schematic.   You can also try to build up something like this device, below. Or a crystal oscillator, such as the one I'm using.