Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Witness the Free Energy effect  (Read 53224 times)

vasik041

  • Full Member
  • ***
  • Posts: 209
    • FE R&D
Re: Witness the Free Energy effect
« Reply #60 on: April 23, 2017, 07:30:45 AM »
Someone was asking why there are so many self runners in Russia.

Don't be naive, most of them fakes or 1st April jokes  ;)

partzman

  • Sr. Member
  • ****
  • Posts: 379
Re: Witness the Free Energy effect
« Reply #61 on: April 23, 2017, 04:00:13 PM »
For those interested, I have had positive bench results testing TR's EGS effect that may be seen on OURdotcom on the "Theoretical Research Device" thread.  You do not need to be a member to view the contents of the thread but do if you wish to post.  The results agree closely with the simulation of the core assembly which is a ferrite TV yoke with copper foils and a 10 turn sense coil.

Regards,

PM

vasik041

  • Full Member
  • ***
  • Posts: 209
    • FE R&D
Re: Witness the Free Energy effect
« Reply #62 on: April 23, 2017, 05:31:46 PM »
For those interested, I have had positive bench results testing TR's EGS effect that may be seen on OURdotcom on the "Theoretical Research Device" thread.  You do not need to be a member to view the contents of the thread but do if you wish to post.  The results agree closely with the simulation of the core assembly which is a ferrite TV yoke with copper foils and a 10 turn sense coil.

Regards,

PM

Hi Partzman,

Thanks for posting this.
To make sure that effect is "real" I would suggest you trying change polarity of signal generator and repeat the experiment.
Then change polarity of the sense coil and again repeat experiment.
This way you easily see how ground connections (and other stray capacitances) affect your measurements.

Regards,
V.




partzman

  • Sr. Member
  • ****
  • Posts: 379
Re: Witness the Free Energy effect
« Reply #63 on: April 23, 2017, 07:15:20 PM »
Hi Partzman,

Thanks for posting this.
To make sure that effect is "real" I would suggest you trying change polarity of signal generator and repeat the experiment.
Then change polarity of the sense coil and again repeat experiment.
This way you easily see how ground connections (and other stray capacitances) affect your measurements.

Regards,
V.

V.,

You're welcome.  You have a good suggestion that I will try as there are many more tests planned to both confirm and improve the outcome.  We hope TR will release some test info on the air core design as it seems difficult to find suitable ferrite cores that meet his requirements for successful replication.

Regards,
PM

Theoretical Research

  • Full Member
  • ***
  • Posts: 183
Re: Witness the Free Energy effect
« Reply #64 on: April 23, 2017, 08:00:03 PM »
For those interested, I have had positive bench results testing TR's EGS effect that may be seen on OURdotcom on the "Theoretical Research Device" thread.  You do not need to be a member to view the contents of the thread but do if you wish to post.  The results agree closely with the simulation of the core assembly which is a ferrite TV yoke with copper foils and a 10 turn sense coil.

Regards,

PM
Awesome! I've had relatively stable results with the first core I used, although it did fluctuate a bit, but the overall voltage was close to my spice sim. Hopefully your tv yoke core will be stable as well. Although you'll probably see the fluctuations over time, but get a good idea of what the average signal is when rotating the core with respect to earth's surface. My flyback core though, wow, it's an amazing core for a self runner with respect that it has incredibly low non-conductive R, but what I'm seeing so far is that it is extremely unstable. Yesterday it appears the flyback core's non-conductive R was through the roof (high). It will be interesting to see what type of hysteresis loop it has (square loop, flat ...). I do not believe the instability of the flyback is do to the fact that the core is split. I’ve tested this core’s non-conductive R with and without the plastic spacers. The R decreased a bit with the spacers, as expected. What I saw yesterday was abnormally high non-conductive R. So much that I could barely see a slight resonance hump in a frequency sweep. Furthermore, after turning the equipment off for about a half hour and going back to the experiment, the flyback performed beautifully again, but that lasted a few minutes. Right before my eyes I saw the core change characteristics.

Good news is that it appears tv yokes are a great choice. They have low inductance, but due to their wide surface area they offer significant increase in capacitance for the copper foil. :)

PolaczekCebulaczek

  • Full Member
  • ***
  • Posts: 160
Re: Witness the Free Energy effect
« Reply #65 on: April 23, 2017, 11:12:41 PM »
Quote
but get a good idea of what the average signal is when rotating the core with respect to earth's surface

Wait,  what?? so if someone here can demonstrate a power change when device is oriented at different angles with respect to earth (just like in S.Mark, Hendershot devices) than this would be a huge breakthrough, a something really SPECIAL.

Theoretical Research

  • Full Member
  • ***
  • Posts: 183
Re: Witness the Free Energy effect
« Reply #66 on: October 27, 2017, 03:57:28 AM »
Wait,  what?? so if someone here can demonstrate a power change when device is oriented at different angles with respect to earth (just like in S.Mark, Hendershot devices) than this would be a huge breakthrough, a something really SPECIAL.

It's true. I just finished testing a new design, tamed down version, that produces a change of about one tenth of a volt (no amplification needed) by physically flipping the device. That was the predicted voltage according to a LTspice sim using my best spice model of the Metglas 3210P4AF magnetic core. The untamed version should produce close to one volt. This is the 3rd version. The 1st version that I’ve called the digital pulsed version worked every time, but required an amp gain of 10,000. The 2nd version that I’ve called the single frequency version worked on rare occasion, and also required high amp gain to see the voltage change. I now know exactly why the 2nd version is a bad design. The 3rd version that I finished today works every time, and doesn’t require an amplification. I should add that LTspice correctly predicts the 2nd version experiments as well.

This device was secured to a long plastic pole, about 7 feet long, and placed about 6 feet above ground. The long pole is placed horizontally parallel to Earth's ground, and then rotated so that the core flips between facing toward Earth, and away from Earth. This allowed me to rotate the device by rotating the end of the pole. In one position the device is facing down. The other position the device is facing up.

See the attached photos. The circuit is blacked out until I learn it’s okay to release this technology because this design is too close to a self runner. I was advised to release this technology in 2020. Possibly sooner. Please don't ask why!

Metglas cores are not a good choice for self runners. It’s best to use extremely efficient cores, cores that have extremely high resistivity, e.g., 2e+8 ohm·cm, low magnetic viscosity, and as high permeability as possible, but permeability is not as important.

I’m told by a source that I trust 100% that the effect is not due to space accelerating to Earth, but is caused by a spinning vortex of space that *tends* to follow the magnetic field, but not exactly. Therefore, in theory I would expect the polarity of this device to flip if I were to cross the Earth’s equator. Similarly, I would expect the effect to intensify as one approaches the north and south poles, e.g., countries such as Russia. Hint, hint. ;)

I’m also told that magnetic materials also produce the space vortex, but the magnetic field intensity is not the only factor. I believe the space flow velocity is relative to sqrt(diameter) * B. Earth’s magnetic field is weak, but the planet is large. So it’s possible to make a self-runner that’s independent of Earth’s space vortex.

This technology is about producing an intense magnetic field within a perpendicular electric field within perpendicular space flow. The E-field does not have to come from a conventional capacitor, e.g., two metal plates. Wires around a coil also produce E-fields (V/m). Wires in a coil can produce tens of 1000s of volts. When you an intense B-field perpendicular within an intense E-field, both within an intense space vortex that is perpendicular to both the B-field and E-field, you cause a force that either pushes against or with the space flow. If the device is pushing against the space flow, you get free energy. If it’s pushing in the same direction as the space flow, you lose energy.

Last, the weight of the devices that tap into Earth’s space vortex can change by a noticeable amount in high power devices.

[edit: uploading a smaller image]
« Last Edit: October 27, 2017, 03:54:25 PM by Theoretical Research »

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Witness the Free Energy effect
« Reply #67 on: October 27, 2017, 10:57:01 AM »

Theoretical Research

**
Trying to shrink your text so it can be read ,your image above needs to be resized so we can read the page  [to big]**
REPOST BELOW OF TEXT

PolaczekCebulaczek

Quote


Wait,  what?? so if someone here can demonstrate a power change
when device is oriented at different angles with respect to earth
 (just like in S.Mark, Hendershot devices) than this would be a
huge breakthrough, a something really SPECIAL.

end quote


Theoretical Research
 
Quote

It's true. I just finished testing a new design, tamed down version,
that produces a change of about one tenth of a volt (no amplification needed)
 by physically flipping the device. That was the predicted voltage according to a
 LTspice sim using my best spice model of the Metglas 3210P4AF magnetic core.
 The untamed version should produce close to one volt. This is the 3rd version.
The 1st version that I’ve called the digital pulsed version worked every time, but
 required an amp gain of 10,000. The 2nd version that I’ve called the single frequency
 version worked on rare occasion, and also required high amp gain to see the voltage
 change. I now know exactly why the 2nd version is a bad design. The 3rd version
 that I finished today works every time, and doesn’t require an amplification. I should
add that LTspice correctly predicts the 2nd version experiments as well.

This device was secured to a long plastic pole, about 7 feet long, and placed about 6 feet
 above ground. The long pole is placed horizontally parallel to Earth's ground, and then
rotated so that the core flips between facing toward Earth, and away from Earth. This
allowed me to rotate the device by rotating the end of the pole. In one position the device
 is facing down. The other position the device is facing up.

See the attached photos. The circuit is blacked out until I learn it’s okay to
release this technology because this design is too close to a self runner. I was
advised to release this technology in 2020. Possibly sooner. Please don't ask why!

Metglas cores are not a good choice for self runners. It’s best to use extremely
 efficient cores, cores that have extremely high resistivity, e.g., 2e+8 ohm·cm,
 low magnetic viscosity, and as high permeability as possible, but permeability
 is not as important.

I’m told by a source that I trust 100% that the effect is not due to space accelerating
 to Earth, but is caused by a spinning vortex of space that *tends* to follow the
magnetic field, but not exactly. Therefore, in theory I would expect the polarity of
this device to flip if I were to cross the Earth’s equator. Similarly, I would expect
the effect to intensify as one approaches the north and south poles, e.g., countries
 such as Russia. Hint, hint. ;)

I’m also told that magnetic materials also produce the space vortex, but the magnetic
 field intensity is not the only factor. I believe the space flow velocity is relative
 to sqrt(diameter) * B. Earth’s magnetic field is weak, but the planet is large. So
 it’s possible to make a self-runner that’s independent of Earth’s space vortex.

This technology is about producing an intense magnetic field within a perpendicular
electric field within perpendicular space flow. The E-field does not have to come from
 a conventional capacitor, e.g., two metal plates. Wires around a coil also produce
 E-fields (V/m). Wires in a coil can produce tens of 1000s of volts. When you an
intense B-field perpendicular within an intense E-field, both within an intense space
 vortex that is perpendicular to both the B-field and E-field, you cause a force that
either pushes against or with the space flow. If the device is pushing against the space
flow, you get free energy. If it’s pushing in the same direction as the space flow,
you lose energy.

Last, the weight of the devices that tap into Earth’s space vortex can change by a noticeable amount in high power devices.

Theoretical Research

  • Full Member
  • ***
  • Posts: 183
Re: Witness the Free Energy effect
« Reply #68 on: October 27, 2017, 03:12:08 PM »
Is there a way to turn it into a thumbnail image that's clickable?

Theoretical Research

  • Full Member
  • ***
  • Posts: 183
Re: Witness the Free Energy effect
« Reply #69 on: October 27, 2017, 03:51:12 PM »
Regarding personal messages to build a device to witness the free energy, and anyone who’s interested. Here are the 3 options:

The Red pill
The only way I’ll help people from this point forward is to use exact part numbers for key components such as the magnetic core, MOSFET, and timer chip. That means you’ll need to buy a core from Amidon. If enough people agree to replicate this, then I’ll come up with a design that demonstrates the space flow effect without making it too obvious how to make a self runner.

The Blue pill
Do nothing, and just wait till humanity is ready and responsible enough for this technology, which will indeed eventually allow any individual on Earth to literally destroy the entire planet. No reply necessary.

The Purple pill
Have a well known and trustworthy person from OU meet me at some location out here near LAX where they will have full access to a device that will demonstrate the space flow effect. That way nobody has to build anything. This person has the option of bringing the amidon core (wound) and whatever other parts they wish so that they can drop it in the device.

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Witness the Free Energy effect
« Reply #70 on: October 27, 2017, 04:25:40 PM »
Clickable image might be something we can ask Stefan about ?
this image size issue has been a thorn over here for a long time [easy to do accidentally]
on the other topic?
we do have a few very trusted friends on your coast who might be able to help with  this ?

one in particular [Smokey 2]
I haven't spoken to in quite some time ,a very cool fellow who recently relocated out there.

I'll ring him today for sure.

respectfully
Chet K

kampen

  • Full Member
  • ***
  • Posts: 132
Re: Witness the Free Energy effect
« Reply #71 on: October 27, 2017, 07:51:13 PM »
Dear, please count me in for the RED pill.

FatBird

  • Hero Member
  • *****
  • Posts: 1178
Re: Witness the Free Energy effect
« Reply #72 on: October 27, 2017, 11:31:09 PM »
Theoretical Research mentioned rotating magnetic fields.  Click on
the Link below to see how a North Pole rotates it CW & a South
Pole rotates it CCW.

https://www.youtube.com/watch?v=afQW8FT02DM
                                                                                                              .

PolaczekCebulaczek

  • Full Member
  • ***
  • Posts: 160
Re: Witness the Free Energy effect
« Reply #73 on: October 28, 2017, 01:58:30 AM »
It's true. I just finished testing a new design, tamed down version, that produces a change of about one tenth of a volt (no amplification needed) by physically flipping the device. That was the predicted voltage according to a LTspice sim using my best spice model of the Metglas 3210P4AF magnetic core. The untamed version should produce close to one volt. This is the 3rd version. The 1st version that I’ve called the digital pulsed version worked every time, but required an amp gain of 10,000. The 2nd version that I’ve called the single frequency version worked on rare occasion, and also required high amp gain to see the voltage change. I now know exactly why the 2nd version is a bad design. The 3rd version that I finished today works every time, and doesn’t require an amplification. I should add that LTspice correctly predicts the 2nd version experiments as well.

This device was secured to a long plastic pole, about 7 feet long, and placed about 6 feet above ground. The long pole is placed horizontally parallel to Earth's ground, and then rotated so that the core flips between facing toward Earth, and away from Earth. This allowed me to rotate the device by rotating the end of the pole. In one position the device is facing down. The other position the device is facing up.

See the attached photos. The circuit is blacked out until I learn it’s okay to release this technology because this design is too close to a self runner. I was advised to release this technology in 2020. Possibly sooner. Please don't ask why!

Metglas cores are not a good choice for self runners. It’s best to use extremely efficient cores, cores that have extremely high resistivity, e.g., 2e+8 ohm·cm, low magnetic viscosity, and as high permeability as possible, but permeability is not as important.

I’m told by a source that I trust 100% that the effect is not due to space accelerating to Earth, but is caused by a spinning vortex of space that *tends* to follow the magnetic field, but not exactly. Therefore, in theory I would expect the polarity of this device to flip if I were to cross the Earth’s equator. Similarly, I would expect the effect to intensify as one approaches the north and south poles, e.g., countries such as Russia. Hint, hint. ;)

I’m also told that magnetic materials also produce the space vortex, but the magnetic field intensity is not the only factor. I believe the space flow velocity is relative to sqrt(diameter) * B. Earth’s magnetic field is weak, but the planet is large. So it’s possible to make a self-runner that’s independent of Earth’s space vortex.

This technology is about producing an intense magnetic field within a perpendicular electric field within perpendicular space flow. The E-field does not have to come from a conventional capacitor, e.g., two metal plates. Wires around a coil also produce E-fields (V/m). Wires in a coil can produce tens of 1000s of volts. When you an intense B-field perpendicular within an intense E-field, both within an intense space vortex that is perpendicular to both the B-field and E-field, you cause a force that either pushes against or with the space flow. If the device is pushing against the space flow, you get free energy. If it’s pushing in the same direction as the space flow, you lose energy.

Last, the weight of the devices that tap into Earth’s space vortex can change by a noticeable amount in high power devices.

[edit: uploading a smaller image]

Theoretical Research, there is a SOLID theory behind your device, not some bullshit about energy from nothing however, we must remember that by taking energy from something that is moving we would slow down its movement so in your case... can you slow down the cosmic wheelwork of nature? I'm extremely exited about this technology, in fact, once I was thinking about building something similar but I gave up because "if it were so simple than such generator would be invented and distributed long time ago". PLEASE can you make a video of the effect?  (1 volt changing without any amplifier due to change of device position)
also, IF I shoot a charged HV capacitor from cannon and if this cap flies through a coil, would any current be induced?

Theoretical Research

  • Full Member
  • ***
  • Posts: 183
Re: Witness the Free Energy effect
« Reply #74 on: October 28, 2017, 07:40:17 AM »
Theoretical Research, there is a SOLID theory behind your device, not some bullshit about energy from nothing however, we must remember that by taking energy from something that is moving we would slow down its movement so in your case... can you slow down the cosmic wheelwork of nature? I'm extremely exited about this technology, in fact, once I was thinking about building something similar but I gave up because "if it were so simple than such generator would be invented and distributed long time ago". PLEASE can you make a video of the effect?  (1 volt changing without any amplifier due to change of device position)
also, IF I shoot a charged HV capacitor from cannon and if this cap flies through a coil, would any current be induced?

Interesting questions. It’s true that the math comes from classical mechanics. The unknown is the planet’s vortex of space flow.

I'm told that when such a device takes energy from the planets vortex that a cloud of fine particles can form around the device, and thus the planet would actually gain mass. This Earth’s magnetic field is not affected. The energy comes from what mainstream knows as the vacuum. I would like to add my personal observations. The first time I saw such a high power device I panicked because I swear there was faint smoke coming from the device. I thought my MOSFET was burning up. I see this faint smoke effect every time when the device is powered on. I don’t know how I can see this faint smoke, but have often wondered if other people would see it. It’s a mystery. Maybe it’s just a psychological effect? Idk. Has anyone ever noticed something like that?