Free Energy | searching for free energy and discussing free energy

Mechanical free energy devices => mechanic => Topic started by: ARMCORTEX on March 06, 2017, 08:17:01 AM

Title: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 08:17:01 AM
I have working  design from my calculation, I have figured the most efficient way to get centrifugal power using as least energy possible. Idea is easy but requires much preparation


I need rich investor for prototype.

Only rich people please.

No talk, bring money.
Title: Re: I have working idea for 6000$ usd
Post by: Lakes on March 06, 2017, 10:51:58 AM
No talk!, bring Money!!, straight and to the point! lol
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 06, 2017, 10:52:03 AM
Why not - but the expansion of rotor diameter after achieving the maximal revolutions needed wouldn't work...  8)
Title: Re: I have working idea for 6000$ usd
Post by: Thaelin on March 06, 2017, 11:42:43 AM
   You sound so familiar to me, are you the person who some time back made a post that said , " Centrifugal force is your friend use it" ?

thay
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 04:22:24 PM
I need only money, no need to talk to you, you dont have the skills, you dont have no Idea what I mean, I am very high will person but have no will to talk with monkeys of this forum who polluted this forum with bat guano all over the floor for decades to come. Me and you have nothing in common we will not discuss anything related to MY ideas.

https://www.youtube.com/user/Skyrimninjamod/videos?sort=dd&view=0&shelf_id=0

Idea is big modification of something  hidden in here, you will never figure it out. I'll not tell wich idea was the best but I have exact 3d design and calculations and I am sure I have come up with the best mechanical design OU in the history of world, the only mechanical device that will ever work.

Never mind anything you have ever seen recently and not so recently, it was all made up crap from payed people to make scams and misinform the would be researcher. perhaps exept Stepanov and TPU.

No noob talk, no bullshit, you have no right to piece of my cake, dont ask nothing, I need money from rich guy only.

The rich financier is my only friend, I need only him. Money will go to powerful optimization software and then build as it will be very demanding for components. I dont need the participation of cheap ass garage people with bad build skills this machine needs quality and attention to detail.

I may need more than 6000$, the software will be mine to keep, I share 75% to investor and 25% for me.
Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 06, 2017, 06:10:10 PM
My advise to you is to take out a loan if you are so sure your idea will work as that would be putting your money where your mouth is. Trust me I have done so already with my ideas and am about to go to market with the technology soon. So, if you truly believe in yourself then take out a loan and move forewords and let none of us stand in your way of progress as that way no one would be able to get in your way other than yourself. Am I making myself clear to you? Believe me most people out there feel this way when it comes to someones ideas of something they haven't even tried to build yet for themselves, IE, a working prototype or some sort of effort of the idea man putting up his own funds to make his dreams come true.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 06:18:50 PM
I prefer to put other people's money where my mouth is, I have calculation overunity and hard design, I need other person's money. 30% is something I am happy with.

I need big money person, who gambles this type of money on a weekly basis.

As for your hydrogen hobby, as I have told you time and again, the buck stops with Stan's brother, Stephen, and I have the circuit here for you to pursue the patent wich was rejected. Stephen knows better, he has saved nuclear reactors and is top engineer. If Stephen lied, then all is a lie, you lose either way.

I believe I have an old PCB file for this.

https://www.youtube.com/watch?v=f80CdFTf6f4

Title: Re: I have working idea for 6000$ usd
Post by: ramset on March 06, 2017, 07:57:51 PM
Arm.....
will you go along with an open source agreement ?
once your tech is proven by "investor"
 
?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 08:07:56 PM
I would go public route if public financing was effective but its not so I need private person.

I would need money from public to buy software, then to make it would cost equal that. Its the kinda of thing that needs to be big, heavy, and fast, and not break nor destroy. Software optimization is necessity.

I m using 100% centrifugal force in the most efficient manner humanly possible, by the use of flywheel and impulse.

For 6000$ from the public, in USD, I will show the machine, its the most beautiful mechanical machine you will ever see and baby simple. I will also make it, from that point I dont mind as I will race to the build and complete before anyone who competes with me.

 Nothing comes close, nothing in human history comes close to the perfection of this 100% mechanical machine, there are some electronics aspects but not advanced.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 08:28:41 PM
Wait, 6000$ will not be enough. This will be enough to buy the softwae then I show the motion then I move forward with other inverstments that I will get after that and race for the first seat.

Its not proven in the sense that I made it, if rich guy finances rich guy decides. All I care is money, integrity.

And I dont show this design for free, that is 100% for sure, to see is to steal and understand MY design.
Title: Re: I have working idea for 6000$ usd
Post by: ramset on March 06, 2017, 08:31:42 PM
You sound so certain / confident !!
What a surprise....

I know.. I know ...I can feel the breeze from you patting yourself on the back all the way down here in NYC !!

there are people who will get behind an open source project , but your use of the word public leaves much more to explain.... like going public as in stock market ??

long story short ,
will you let investor open source tech once proven ?
 



 
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 06, 2017, 08:39:47 PM
100%

Public give me money to build. public can have it.

The project can only be advanced by money, just a common sharing will only result in stalled project for me and I know some secret rich company will make it in secret behind my back.

Money will be spent on research of this 100%, best mechanical idea ever, all who have come before have never witness anything remotly close to this, 100% guarantee, anybody who sees this machines starts to dream and wishes to steal from me.

I dont share this with public without paying a price this is MY idea, I say it now because some people will try to steal from me wich is mine.
Title: Re: I have working idea for 6000$ usd
Post by: ramset on March 06, 2017, 08:44:53 PM
that's the problem with Money ...and people

very old problem
Title: Re: I have working idea for 6000$ usd
Post by: dieter on March 06, 2017, 09:25:04 PM
Investors in Free energy are usually victims of scam, therefor there are so few of them anymore.


But there are other investors, who don't ask questions. Tho they may break your leg if you don't pay back with the high interest. So make sure it works before you invest your health or so.
Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 06, 2017, 11:26:41 PM
I prefer to put other people's money where my mouth is, I have calculation overunity and hard design, I need other person's money. 30% is something I am happy with.

I need big money person, who gambles this type of money on a weekly basis.

As for your hydrogen hobby, as I have told you time and again, the buck stops with Stan's brother, Stephen, and I have the circuit here for you to pursue the patent wich was rejected. Stephen knows better, he has saved nuclear reactors and is top engineer. If Stephen lied, then all is a lie, you lose either way.

I believe I have an old PCB file for this.

https://www.youtube.com/watch?v=f80CdFTf6f4 (https://www.youtube.com/watch?v=f80CdFTf6f4)


Good luck with that approach for as someone already mentioned too many scammers have ripped people off in the past with some very exciting words only to leave the investors with a bit less money than they started out with. Most will agree with what I told you as if you aren't willing to put your money in on this then why should anyone else? You might even get someone to go with matching funds but zero from your side of the house? Good luck


As for Meyer's technology I have most of it figured out already and truly don't need any help from anyone right now on how it works. That video that you showed has the waveform all wrong which shows me that your understanding of Meyer's tech needs a lot of work. I on the other hand took the long road and started asking and answering the right questions concerning Meyer's technology. Unlike you I am willing to work for it as I believe in the science I have uncovered for the science I found is already taking place in nature each and every day. You see I have built everything and tested it thus know far more than anyone that I know of about the technology. Most of the remaining questions I have people don't even know these are questions concerning this technology.


You have to understand the scammers have done their damage to these technologies so there will be no free lunch on any of this as a result of their combined efforts to rip people off. We have to now do things the old fashion way and I am still in the game haven't given up working for it with a little help from others that believe in the results I have shown thus far but mostly the funds to do all of this comes from me. But I am getting more and more help lately and I am very thankful for their help as it is much needed.

Another thing you have to understand is how the markets work for if you are trying to have everyone build "One-Offs" then you are asking people to pay the highest cost possible to have what ever it is you are peddling. Only through some form of mass production can the prices be brought down so that everyone can afford to have these technologies. The sooner you learn this the better things will go for you.


Again, best of luck to you.
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 06, 2017, 11:59:30 PM
The problem with getting money from overunity devices is similar to getting money from spreading of multimedia in electronic form. Once you can stream and watch the movie at computer, nothing could prohibit you in grabbing/saving and subsequent spreading of obtained data. The security by obscurity simply doesn't work here, because you can watch and use the multimedia stream in its unscrambled form only.

The problem with overunity devices is similar: the first person who will buy it will copy and publish its principle at internet and the Chinese will flood the market with cheap replicas. At the very end you can make money only with materials and human work involved. After all, the companies which sell coal or nuclear energy also don't charge you for the principle of their energy generation: this principle is and it should remain free for everyone in similar way, like the laws of math cannot be patented.
Title: Re: I have working idea for 6000$ usd
Post by: endlessoceans on March 07, 2017, 01:45:16 AM
You have a working idea?  That's a oxymoron.   An idea is not working until you transfer it into a FACTUAL reality.  You are not dealing with reality.  There is your first problem.  Many people before you have vomited thousands pages of nonsense on ideas that they were very sure worked.  Well they haven't.

6000$$   Hmm that is very close the price to traffic a human from middle east across to Europe.    I wish you the best in your journey when you get to Europe.  You will have to find another way to scam the boat ticket.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 02:13:12 AM
If Jim Murray got money for his mechanical devices by somebody, then I want money too, more money, because my work is better.

My mechanical device is far superior to anything you say, beyond your simple words, beyond the actions you could ever input into this universe.

I seek my rich man investor, if you are not a rich investor stand back.



Title: Re: I have working idea for 6000$ usd
Post by: Lakes on March 07, 2017, 08:46:33 AM
Hold on, $6000 just for the software??

What kind of software costs that much?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 12:47:37 PM
Yes its very expensive, but my machine is very dangerous and big build.

But there is worst price than this, this is very low end.

Title: Re: I have working idea for 6000$ usd
Post by: sm0ky2 on March 07, 2017, 03:12:59 PM
Yes its very expensive, but my machine is very dangerous and big build.

But there is worst price than this, this is very low end.


What do you need money for that can't be done for free with
Resources and Manpower?


You should try indiegogo or kickstarter or something
Title: Re: I have working idea for 6000$ usd
Post by: Low-Q on March 07, 2017, 03:27:59 PM
I have working  design from my calculation, I have figured the most efficient way to get centrifugal power using as least energy possible. Idea is easy but requires much preparation


I need rich investor for prototype.

Only rich people please.

No talk, bring money.
I have lots of money. I spend them on power bills.


That said, your centrifugal device will not work because your calculations are incorrect.
Any centrifugal displacement of any given mass will take energy from the device.


There are three options, mainly, when it comes to centrifugal generators:
1. No mass displacement
2. Partial mass displacement
3. Full mass displacement


Part 1 and 3 wont take energy, but they also don't provide any.
Part 2 will take energy, and deliver the same amount.


Part 1 consist of only pressure - like Voltage in an electric circuit (actually not a circuit since the wires are open).Without current, there is no energy.
Part 3 consist of only mass flow - like Current in an electric circuit. Without voltage there is no energy.
Part 2 consists of both mass flow and pressure - like Voltage and Current in an electric circuit -> energy.


Good luck.


Vidar
Title: Re: I have working idea for 6000$ usd
Post by: Low-Q on March 07, 2017, 03:37:49 PM
You have a working idea?  That's a oxymoron.   An idea is not working until you transfer it into a FACTUAL reality.  You are not dealing with reality.  There is your first problem.  Many people before you have vomited thousands pages of nonsense on ideas that they were very sure worked.  Well they haven't.

6000$$   Hmm that is very close the price to traffic a human from middle east across to Europe.    I wish you the best in your journey when you get to Europe.  You will have to find another way to scam the boat ticket.
You nailed it :-)) LOL ;D
Title: Re: I have working idea for 6000$ usd
Post by: Gabriele on March 07, 2017, 04:14:37 PM
If you need i reveal you one for 100.000 USD...
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 04:48:04 PM
Low-Q, yes there is a cost, but it can be minimized and other opportunities are opened.

If standard theory is applied and enough is used, it cna be 95% efficient and more. Of course its wildly un-economic

But the new question is if further efficiency can be attained with impulse mechanism, properly timed, wich work by flywheel.

This is where new theory is brought in, aspden effect and accelerating impulse of  accelerating mass.

That is enough for now.

I have been contacted and will try to get necessary financing for build.



Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 07, 2017, 05:19:34 PM
You can learn a lot from this video: https://www.youtube.com/watch?v=gg23Y9Ua4qE
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 05:52:08 PM
No H2opower, I dont wanna be business man, I wanna be reclusive in front of my computer, this is where I am most happy, I dont wish to talk to anybody, my only friends I need are electronics, cnc machines, programming, my ideas. Talking and travelling is boring to me.

https://www.youtube.com/watch?v=Bht59wV6Bt8

Why I need money?

Because the rich assholes, Kenneth Bodin, and Kevin Leblanc, gave me a good price, wich I was gonna pay from my pocket, then I said I was makign free energy research with such software, and they cancelled the good deal and nearly double the price because they think its not possible since they are the engineers and they know better.

I said I was gonna make them good publicity, and now look, still nothing impressive was done and nobody uses their software.

Message these people

kenneth bodin at algoryx

kevin leblanc at ansys

Ask them, why they cancelled the good deal for Lawrence, say to them, I wanna see Lawrence make his design and he needs cheap software.

With such software I will test and optimize all the mechanical device that I ever see, mine, skinner, other's, it will never stop, I will even provide free test service to anybody who has an idea.

Go get these people, I want mob to attack them, spam them. But dont show them this thread, it will not help.

Tell them, Lawrence wants to make design to show to public many ideas for mechanical device, he deserve price drop and you are excited to see what will happen.
Title: Re: I have working idea for 6000$ usd
Post by: Paul-R on March 07, 2017, 06:28:49 PM
I need only money, no need to talk to you, you dont have the skills, you dont have no Idea what I mean, I am very high will person but have no will to talk with monkeys of this forum who polluted this forum with bat guano
This sort of talk is guaranteed to get you funding.

How much money have you collected so far?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 06:45:24 PM
Money may not be needed if you can write a good letter to Kevin Leblanc at Ansys, I believe he has blocked me, and tell them what I just said.

That I wanna show good design to pubic using their software and that is win win for everybody.

Tell them, I am interrested in seeing cool designs, why did you cancel the deal that was agreed with Lawrence.

The price was so expensive, I said, Ok, let me gather money, I wait 2 months for a bit more money, just to be not empty after transaction, and he retract offer. Tell him, you are not happy with such dirtbag moves.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 07:37:58 PM
No my idea does not work, I miscalculate.

Goodbye, off to new idea.

Did you expect this to work?

Newton was quite the god...
Title: Re: I have working idea for 6000$ usd
Post by: Gabriele on March 07, 2017, 07:39:33 PM
Can't be a trial be available? Can't you perform the sim with French brands or similars? I think Comsol or SolidWorks are good too...
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 07:47:10 PM
No I want you all off my tail now, idea is mine, SCRAM idiotz... I will get myself a poker gambler.

Why dont you guys make a kapanadze or continue my Stephen work.

Overunity people never give me nothing good no matter how often I come back month after month.

When will overunity be possible... Never son... Life is work, money.

I will get my own money, one day I will get this software, I also need it for other things.


Title: Re: I have working idea for 6000$ usd
Post by: Gabriele on March 07, 2017, 07:50:47 PM
I wish you will find what you are looking for
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 07, 2017, 08:38:32 PM
Rich gambler: come to me, I am here to work for you and give you my ideas, I ask only that you pay me software. I can also design product for you.

Title: Re: I have working idea for 6000$ usd
Post by: TinselKoala on March 08, 2017, 12:47:08 AM
Quote
Welcome to OverUnity.com
[/size]                                                                                 The International Open Source Free Energy Research Forum


I wonder what "open source" means...... 
Title: Re: I have working idea for 6000$ usd
Post by: sm0ky2 on March 08, 2017, 01:56:01 AM
I feel like we're being "led in"
Title: Re: I have working idea for 6000$ usd
Post by: Lakes on March 08, 2017, 08:31:54 AM
So, ArmCortex has ditched this idea and moved onto another one, anyone still want to send him $6000?

Any rich gamblers here? :)
Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 08, 2017, 10:32:23 AM
No H2opower, I dont wanna be business man, I wanna be reclusive in front of my computer, this is where I am most happy, I dont wish to talk to anybody, my only friends I need are electronics, cnc machines, programming, my ideas. Talking and travelling is boring to me.

https://www.youtube.com/watch?v=Bht59wV6Bt8 (https://www.youtube.com/watch?v=Bht59wV6Bt8)

Why I need money?

Because the rich assholes, Kenneth Bodin, and Kevin Leblanc, gave me a good price, wich I was gonna pay from my pocket, then I said I was makign free energy research with such software, and they cancelled the good deal and nearly double the price because they think its not possible since they are the engineers and they know better.

I said I was gonna make them good publicity, and now look, still nothing impressive was done and nobody uses their software.

Message these people

kenneth bodin at algoryx

kevin leblanc at ansys

Ask them, why they cancelled the good deal for Lawrence, say to them, I wanna see Lawrence make his design and he needs cheap software.

With such software I will test and optimize all the mechanical device that I ever see, mine, skinner, other's, it will never stop, I will even provide free test service to anybody who has an idea.

Go get these people, I want mob to attack them, spam them. But dont show them this thread, it will not help.

Tell them, Lawrence wants to make design to show to public many ideas for mechanical device, he deserve price drop and you are excited to see what will happen.


I wonder why you even bothered to make this thread in the first place if your not wanting to talk with anyone but you, yourself, and your I. Talking like this you have to still be living with your parents or something wanting the easy way out. Real people work for what they want and they work hard most of the time. It seems you need a bout of homelessness to get your priorities straight.


If you want to make the world, or at the very least help, be a better place then you have to fight for it as those that are in power right now want nothing of it. This is going to be the fight of our lifetime and you want to do it sitting on your ass in front of your computer in real true arm chair warrior style. Grow up kid as in the real world changes like most of us want don't come easy but with a lot of blood, sweat, and tears. We all have to make sacrifices and do without something to make our dreams, or ideas in your case, come true. Start eating only three times a week so you can save up your money and next time keep your big mouth shut about what you intend on doing with someone else's technology that will be working not in their best interest.


I know the way I talk gives you a bone to pick with me but just ask around I'm like this with practically everyone. I will tell you the truth even if it hurts as I'm getting up in age and could care less to be making up some lies to make you feel good. I gave you some sound advice that if followed would more than likely get your ideas off the drawing board. But it's always a question of choice isn't it?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 08, 2017, 04:11:13 PM
My idea is not ditched, I want to discourage the bad people who are after me. Its a filter, I know my rich gambler will be smart.

100% of the time, my system gives energy to system as impulse to replenish the flywheels that give their energy as impulse, in subsequent cycles, and later(always), collects this as centrifugal force that is carefully directed to make the wheel turn. Its always impulsing and the input power is 100% an open and unrelated system. Its the best idea in the history of mechanical ideas due to the input strategy and only using said "fictitious force".

Without impulse my idea can reach 95% efficiency, with impulse I hope to gain the magic effect.

Its my idea, my design, I keep my idea to myself for now, it gives nothing to share with a bunch of poorly equipped people. absolutely nothing.

What is your business proposal? Where is your money?

What you want? You have working design based on dingel why are you here? A device based on convicted fraudster that claimed to have it for 25 years yet never shared with a single phillipino peasant and received 300,000$ yet did not deliver the agreed product when he already have working prototype.

I will not even debate with stupid people such as you, your mind is not up there to interest me I believe talking to my cat is more fun.

Why dont you just get out of here, I know what I must do, and being nice and chit chat that leads to nothing is not one of
my priorities for development is such technology. I slam you because you are wrong and just a liar.

I am real world person, when I have an idea I think of step 1, step 2, step 3 .... etc
Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 08, 2017, 10:03:10 PM
It's interesting to see your responses knowing you are looking for funding from a business owner such as I. The water for fuel technology that Dr. Dingle, Stanley Meyer, Herman Anderson, Andrija Puharich, and a few others working in the field have one thing in common in that they all made use of high voltage to break the bonds of the water molecules in a manor that was far more efficient than Dr. Faraday's electrolysis method. I just happen to be one of the few that have gotten at the real science behind the technology nothing more.


As for what you are doing if it helps make the world a better place then I welcome the technology. As for you learn how to become a people person once again as all of this hate you carry around with you isn't good for your health. To me you come across as a scammer and I have a feeling I am not the only one that feels that way about you based on how you presented yourself to all of us with these few post you made. Based on how you have presented yourself to us right now anyone can kill any type of fundraiser you plan to do in the future just by copying and pasting what was said here in anything you attempt to do in the future. I attempted to warn you to be nice and take advice but like I said it's all about choice and you chose to be a jerk instead of putting your best side forwards as you should have done. Anyway I will respect your wishes and leave you to your arm chair, computer, and cat to think about just what you have done here with this thread as it pertains to your reputation.


Best of luck in trying to make the world a better place.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 08, 2017, 10:16:26 PM
Scram kid, you showed me this 7 years ago on ionizationx.

Good thing I was banned from that site, I think most people got mentally unstable after giving 10 years of their life to follow in the footsteps of Meyers.

You are such a poser, god damn all you posers.

Yeah I'm a jerk, I am mean, to you.

Good with good people, mean with bad people, I enjoy slamming a poser can you blame me?

You are right, I thoroughly hate people from this site, I don't know if its the fact that Everytime I read a paragraph I smeell bullshit and can never put into action the bullshit because they never make me a full complete design to try in 3D and I always have a ton of work from their basic paint drawing, Everytime somebody have answer, you ask schematic he dissapear, you ask to make clear BOM he don't know how, you ask proof he has no camera or is paranoid. I cannot even read the shit anymore I see shit everywhere I look.

Consider this, when you seek a job, who do you go see? A bunch of poor guys or a rich guy/company? When you have a big idea and need investment who you need? Does the rich guy like it if he know I asked all the poor guys to help or he want return on investment?

Fundraiser will fall below required, I need help of only 1 business owner, I give my all to him.
Title: Re: I have working idea for 6000$ usd
Post by: h20power on March 09, 2017, 01:35:16 AM
If your old enough to call me a kid that would put you in the retirement age as I was born in the 60's. Young people like you always have something to prove but never anything solid to show other than and IDEA, LOL. Well, this one business owner isn't going to fund you that's for sure as from my standpoint the risk are simply too high. You have the attitude of someone who has already lost the war before it starts. You will find there are very few people like me left in this world, you know the people that have an idea, turn the idea into reality, and start businesses based on them. It would seem old guys like me are being phased out as the system doesn't want people whom can think as they just want obedient workers.


It would be good to see your idea come to life but perhaps I won't live long enough to see it, huh? Oh well, sometimes it be's like that. Oh, just so you know, your not really mean just rude, arrogant, and stupid. Trust me that a real bad combination. You have zero people skills and that will always put you at the bottom of the barrel of humanity as closed mouths don't get fed and rude ones starve.


Interesting chatting with you and I hope you learned something from it.
Take care and I do wish you the best of luck getting your idea out of your head into the real world. Be well.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 09, 2017, 02:23:13 AM
No this is serious idea you don't understands this idea is higher than dumb tech shit yeah lots to prove, I work hard to reach acceptable grasp of this physical universe now it's time to prove me I did it all with school of self training just for one day inventing stuff.

OK Ill be nice, it's the evolution of pendulum device, a combining pulsed pendulum.

What I would do for software dam...I need only that to get rolling, make nice demo, propose price to rich local, have it done with quick where is the gambler?

I need 4000$ Cad dollars, I show design. I will spend money too.

I Will also continue Stephen Meyer research. All that is needed is a 6 element 18 tube cell and I will self wind the transformers

If you are rich I am here as your soldier. Don't attempt these difficult things I will do it all for you, you will only get bored my I will push harder than you. I am waiting for my financier, only I am worthy of your money.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 09, 2017, 03:45:39 AM
What we will do for such money.
 
I will simply donate my best ideas to you and let you keep 33% of the rights and share all technological data with my associate, my part is subject to a buyout. All further financing will be done from other 33% stakeholder person after I can demonstrate and propose cost, in the event of success all % becomes irrelevant.

All technological details are in reach s of your understanding and immediately ready.

Awaiting your investment dear sir.

On the event that this fails I am simply dissapointed. This is a single investment.

Once I am legal owner of such software I will also investigate other inventions and products as this is a super useful tool for combining moving images to prospective customers, and I will always remember the gambler who gave me my gift and will seek to repay him if success ever comes my way but that is an unwritten rule.
Title: Re: I have working idea for 6000$ usd
Post by: Low-Q on March 10, 2017, 10:41:11 AM
No my idea does not work, I miscalculate.

Goodbye, off to new idea.

Did you expect this to work?

Newton was quite the god...
I know the feeling - when you finally realize.
First a couple of sleepless nights because you're so exited, then the truth hits you hard and brutal.
Nature is allways right.
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 10, 2017, 11:55:57 AM
Quote
Nature is always right.
Nature has its own secrets too - but it doesn't give them without thinking, work and attempts.
Once one idea doesn't work, some other may work instead.
Title: Re: I have working idea for 6000$ usd
Post by: conradelektro on March 10, 2017, 12:54:15 PM
I need 4000$ Cad dollars, I show design. I will spend money too.

I once met a man, who claimed that he could make huge amounts of money if he only had a computer. He wanted to collect stock market data and to analyze it for hidden trends.

Then there are people who think that they could write a book if only they had a good word processor (a word processor is an electronic device or computer software application, that performs the task of composing, editing, formatting, and printing of documents).

And now we got you, thinking that you could build a OU-device if only you had a cad system for 4000.-- or 6000.-- Dollars.

There is nothing new under the sun. You follow the usual pattern of self delusion. Have fun as long as it lasts.

Greetings, Conrad
Title: Re: I have working idea for 6000$ usd
Post by: Lakes on March 10, 2017, 01:23:42 PM
Do they not do a 30 day trial version of the software?

Before spending a huge wedge of cash on it, I`d want to make sure it was up to the job!
Title: Re: I have working idea for 6000$ usd
Post by: Gabriele on March 10, 2017, 01:39:45 PM
It is the same thing i sad to him,but perhaps i was misurnderstood. Why don't you try with a free trial of comsol?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 10, 2017, 04:50:23 PM
You cannot build such things by free trial that is not legal under EULA.

What do you mean, 4000$ is alot? I see gamblers put this money on stupid bluffs all the time. How come there is nobody rich here?

Wich of you is down for 500$ each, I need 8 of you. No open source bullshit, I understand that there is pollution but I need my million dollar one day. I can split that in 8 and be happy.

Its simple, you have a stake in a good idea for low input by you, you think 4000$ is enough and 1 month is enough to optimize what I need? No... I pay 3000$ more just for software.

What about future designs that I wanna bring to machine shop? What about stephen meyers cell and perhaps another thing I see and would like to design in 3d.

This software will last me a lifetime, I am also microcontroller "average" now for 5 years, I read everyday and now getting good finally, and for last yera I been studying control theory and scilab, to make good control system designs for robotics. I wish to design many things, many many things and show moving images to customers and future business partners. I will repay you one day.

All is 2 bird one stone, all the time. My brain has gotten very very big after CNC machine school, microcontrollers, control theory, scilab/xcos, idea searching of OU... Very big brain now.

4000$...Lol...That is not even enough to complete the idea, I will chase down manufacturing help after this.

No I did not meet such mathematical conclusion 45 minutes later :).

I still view this as 95% efficient that can be brought over the edge by use of impulse..

There is a whole stew pot of concepts here that I do not trust simulators. All this is 100% non linear and very creative,

What about aspden flywheel effect and inertial mass delay eggect? What about something already accelerating then get pulsed apparently here is also an efficiency gain.

I use this in very smart arrangement, I dont kid you. Its also simple to undrstand.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 10, 2017, 06:12:46 PM
So who wish to be my business partners? I need help for this great idea.

My 2 best projects, my 2 babies must be brought to conclusion I before I start designing my future inventions with such 3d software, the next billion dollar evolution, the dentist robot, the machinist robot.

As CNC programmer, as machinist, as wannabee mechanical engineer, as microcontroller hobbyist, as wannabee electrical engineer, I will invent my own ideas from this day forward.
I need only money help.

I provide work, I need money, your work is welcomed when I get my money, however I will do my own thing.

We do this as private group, we dont share with losers I dont like them.

We work hard, we think hard, we build hard, nobody is entitled to our work this is not collectivism we are all individualist people in my team.

Nobody is gonna come here and spread that communist bullshit here, overunity is only for the worthy, infinite power is not meant for the unworthy.
Title: Re: I have working idea for 6000$ usd
Post by: sm0ky2 on March 10, 2017, 06:32:30 PM
If there were 'stupid rich people' here, which I assume by your posts
is the type of 'rich person' you are looking for:


Most of us would already have adequate funding to develop our research.


The fact of the matter is, any 'rich people' on this forum are likely too
intelligent to be scammed by your hooplah.
I'll be honest, you could try a lot harder...


Without any definitive proof to justify investment in you as a person or
Into any claims you present, you are not likely to obtain funding through
this venue.


Perhaps you can start your own forum called
Www.stupidrichpeople.com
Or something of the like.



Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 10, 2017, 06:41:05 PM
If there were 'stupid rich people' here, which I assume by your posts
is the type of 'rich person' you are looking for:


Most of us would already have adequate funding to develop our research.


The fact of the matter is, any 'rich people' on this forum are likely too
intelligent to be scammed by your hooplah.
I'll be honest, you could try a lot harder...


Without any definitive proof to justify investment in you as a person or
Into any claims you present, you are not likely to obtain funding through
this venue.


Perhaps you can start your own forum called
Www.stupidrichpeople.com
Or something of the like.

I am not like most of you, your research is not expensive enough and it is not your research and I dont respect your ability to invent.

Get out of here and go follow failure projects for the rest of your life little lemming, we dont need you.

Where is the proof of anything that you have followed untill now, I tell you my proof is that I can get this to 95% efficiency but there is other opportunity in regards to pulses and kinetic energy
exchanges in this particular mehanical scenario.

I will not reveal to you in 3d manufactureable form, in high quality, the particular mechanical scenario I speak of, untill after I am payed the simulation is only necessary for optimization of mechanical forces and the best starting mechanism for resonance, the simulation does not implement the theories well enough because I base my device by combining aspden effect and theory of pulsed orbit under accelaration, all are impemented. I am not satisfied that normal implementation of mechanical force is 95% efficient and will not accept that pumping of the pendulum will be inferior to that.

What exactly do you bring to the table? Are you machinist or engineer? Are you electronics man? Did you practice invention for many years and have good opinions or are you just mad bullshitter?

When you see circuit or design, do you have capacity to re-engineer and deconstruct or you just copy?

If you are one of these people then your viewpoint is cheaply said, just like words.

If you have better design, show me or give me a glimpse, I wish to invest. Show me your work, how you thaink you cna provide the many kW needed.

Dont try to sell me working device or show me somebody who has for sale, I know its a lie I dont invest in lies, if its real its too expensive for me.

If you know somebody who has design show me, if you have patent of somebody else that you understand please advance that projects and provide me with 3d sketch using free trial.

Do not provide me with endless patent numbers of abstracted complicated technology for me to do all the work for you, study and save me time by filtering out most the work because you had particular passion for said patent.

If you have a theory dont speak in endless technical terms and bullshit terms in Tom Bearden fashion, make me a nice design or sketch in 3d please with perhaps a timing diagram of signals, I dont understand these paint drawings that dont implement correct drafting.

If you have idea, show me your skill, show me you are on the cutting edge, I wish to invest...

If you have nothing to say or offer then you should simply say and admit that you should give me money.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 10, 2017, 07:49:29 PM
https://www.youtube.com/watch?v=TsJDx2ldrHc&t=8s

Its the total evolution of this.

Total and complete implementation of many theories using this design, everything has ben figured out exept the the srtarting mechanism is still to be figured out for best cost.

Now we know that centrifugal force is Mass*omega^2*Radius, and we know that power is function of speed and torque, the more speed the more torque the better the more often you repeat the cyrcle the more speed the more torque, yes the more stronger the pulse needs to be but at what point can we optimize this? But a mass in motion wants to stay in motion and gives off massive force.

A 20kg weight running at 400 rpm with 1 meter radius generates 35,000 newtons of centrifugal force, my device can guide this force 100% in the direction we nee. I am not talking lighbulbs I am talking porsche like power.

The more clever the system and input mechanism the more efficiency ( I think, this is where the overunity science I am still unsure of kicks in), we have to remember that this is a freewheeling eccentric mass besides for its slight elliptical orbit, this has the effect of providing useable power, how this differs from usual circular orbit that simply transmits destructive force to bearing and whole bulding I dont know, I know however that not much input is required for a very dangerous heavy thing to start turning, What is the exact number of joules lost in this orbit? How can we best maintain this orbit and by what mechanism can we minimize loss. Here is where I say, the theories converge all in this device, all of them. The slingshot theory and aspden effect.

The real machine moves with much harmony and would make good mechanical artwork and could be sold back to some museum. for like 20,000$

Now you understand why I say it is the best mechanical device ever seen by this forum.

I am awaiting 4000$ to start the build, this will need further funding but once I am legeally free to optimize and propose concrete steps manufacturing I can more easily get funding.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 10, 2017, 08:59:11 PM
Comsol looks extremely complicated and extremely expensive, I am not sure I can learn it. It looks awfully slow to get going also.

I still need to design the launching mechanism, wich is easier said than done. Very easy on algoryx tho, very very easy.

I already know Spaceclaim and Topsolid.

Algoryx has better software, they have the best. But topsolid can also work for the launching mechanism, their sim package is not so bad for the price.

The most important if to be able to provide a nice moving image to explain what I mean to the person with the further finances for the manufacturing.

This person is not like many of you folks, and me, he has alot of money and very little time, he has to say... "wow cool"...Ok, I see this as good risk to take.

Welder, cnc machines, measurements, parts, I will see how cheap this can be done but it will not be cheap, I will spend at least 4000$ from pocket alone.

For the FEA I'll hire a university student and he will optimize, then I'll know what my error margin is.

I can simulate an imperfect radial load repartition and graph and save that then bring him my studies so I can see how far I can push my linking components.

There will also be some major in detail design work overall beyond what I have already done, 1 month is not enough.

In the event that this is a total failure I will sell this to a museum and try to repay my backers.

Of course I will be very happy with my software, and then I will design robots and try to become rich, to try to pay back my backers.
Title: Re: I have working idea for 6000$ usd
Post by: Low-Q on March 13, 2017, 04:15:28 PM
If you need state of the art software to simulate your cutting edge technology, you first need a software that can make 1+1=3. There is no such software around for $4000, or $100 000. You most probably get such software for free - made by a 2 year old kid who can't count.


It would be much more interesting looking into your design or idea in detail, so it is possible to make a proper analyzing of it.
If you ask me to look at it, I am happy to look at it, but unfortunately for you, you will not get the reply to want. I have revealed and debunked lots of ideas from people on this forum, and provided sufficient explanation to why the idea won't work in practice.
I have no economical interests in anything labeled OU. So I'm safe ;-)


Vidar
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 13, 2017, 04:56:52 PM
The attempt to research the perpetuum mobile in simulation software is particularly futile, because this software is based just on energy conservation law.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 04:58:45 PM
This machine is sophisticated. I need to design carefully and legally, I say legally because I think it will work. Do you got money?

Simulator :) shows me that many elements come up to about 100% efficiency when I add motive force it = combination.

I read alot of things...Many names, all have their explanations. I simply combine all theories for my device.

I am not here to discuss the math of it, it's close to state of art minus  a the typical 20% or 30% loss, if you specialty is non linear physics, impulse science, if your name is Kanarev, maybe we could debunk this. I don't care about those who debunk with opinions, I've simmed what could be simmed and I wonder how low I can reduce my input by use of non standard methods. I Cannot accept that standard motive force will be superior to impulse in oscillatory orbit that goes through acceleration cycles.
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 13, 2017, 05:07:18 PM
Working Model SW (http://www.design-simulation.com/purchase/studentproducts.php) is free for 30 days (http://www.design-simulation.com/WM2D/demo.php) and €29.95 for half year. For person intelligent enough for to design working perpetuum mobile it shouldn't be difficult to find a crack at web...;-)
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 05:57:30 PM
What about Z plane ? and it's about designing launch mechanism. I use 2d and 3d, algodoo is pretty good software.
 
My goal is to have a well engineered test rig.

A small 4 element build would do the trick, but precise... Not wood. A generous 15 pound Would be good.

I need aerodynic design, low weight linkage, with emergency break, then I test. I don't want bad things to happen.

To tell you the truth, I need cad software for more than this,  it's for my device, it's  a for other device, it's  a how I work now and since I am good inventor I need shark tank type people, I for example, I'd design myself a Friedrich luling motor and iterate.

I can't just show my designs on YT with pirated shit, they have my IP, they know me, they told me not to crack.

You can't iterate well without cad. :-[
Title: Re: I have working idea for 6000$ usd
Post by: citfta on March 13, 2017, 07:57:44 PM
There are lots of free cad programs on the net.  You can use sketchup or emachine or freecad.  If you were the great researcher you claim to be you could have easily found something you could use.  There are even free electronic schematic programs and simulators.

You are just lazy.  You wouldn't even take the time to look for the drawing for that_prophets machine.  He has already posted it several times in many of his other threads.  Did you even go back and see that I copied it to the thread you were looking at?  The fact you even asked for that drawing tells me a lot about your technical abilities.

I don't know how old you are but you start posting on this forum with the attitude of a ten year old with your gimme gimme money because I am so great at figuring out what the rest of you are too dumb to figure out.  Good luck with that kind of attitude.  You're gonna need it.

Respectfully,
Carroll
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 08:50:51 PM
His idea is just qmogen

I seen alot of Pakistani people with that. You are lazy, go make it... What weight flywheel, what ratio... It's not build ready.

Ok, never mind the cad, I need cash for machine shop quotes

Either I make a nice sim for a guy with a place for it or I make it here where there is no space for it and pay for welding, parts, etc... It's the same for me but I could get more help by convincing an entrepreneur and getting the launch mechanism done fast with some sim package, I'm gonna have to think this through.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 09:12:23 PM
Why does it always have to be like this on this stupid site.

We are all logical.

We know the following: He who has good idea should get the money, thats it.

I will share results, or more like, there will be leaks, drop by drop the bucket will be drained. Not without amusement before however.

Show me, point to me who has project that is worthy of my money.

That_prophet? Gotoluc? The person who is far in  the construction of innova tehcno?

Dont propose me bruce_TPU and his telephone wire coil, those electro projects cost little.

As I am saying, I am ready to invest, show me who is on the verge, I wish to invest...
Title: Re: I have working idea for 6000$ usd
Post by: nelsonrochaa on March 13, 2017, 09:34:42 PM
There are lots of free cad programs on the net.  You can use sketchup or emachine or freecad.  If you were the great researcher you claim to be you could have easily found something you could use.  There are even free electronic schematic programs and simulators.

You are just lazy.  You wouldn't even take the time to look for the drawing for that_prophets machine.  He has already posted it several times in many of his other threads.  Did you even go back and see that I copied it to the thread you were looking at?  The fact you even asked for that drawing tells me a lot about your technical abilities.

I don't know how old you are but you start posting on this forum with the attitude of a ten year old with your gimme gimme money because I am so great at figuring out what the rest of you are too dumb to figure out.  Good luck with that kind of attitude.  You're gonna need it.

Respectfully,
Carroll


Someone touched the wound ... ups  :)
 
I agree that in final develop product stage this type of software could be used to improve the design ,
but just don't understand how you will sell a full idea based only in what that software will produce.

ARMCORTEX Just present your device to world and if is good for sure someone will "fish" you and help you go forward with your invention .
I did the same 3 years ago and i have the luck of someone see something where others did not  and now here i'm continue research  and make what i like in a real job  ; and to do that  i even need to talk in my videos :) or reveal details .

What i try say is if you have a really good idea why you don't materialize them is something real and present that in same way with the tools you have ?
I never use such expensive software's , i only use open-source software like blender , kicad and other free software , and you could use in same way don't agree ?

Are you afraid that someone steal your invention or idea ?
ARMCORTEX did you remember me ? If you remember me  you offer me money some 3 years ago to i sell to you my own design diagrams ; and in that time when i refuse your offer, you just say to me that :

"Take 1200...take 200, take everything you can while it lasts."

In that time are you trying cheating someone ;)  and have the credits to you ?  You should not do to others what you do not want them to do to you.

I really wish you were lucky in your research, but you should be less arrogant in the way you express yourself.
Good luck

Nelson Rocha

Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 09:45:51 PM
Probably I said that, to pay only 200$ for a free energy device sounds like a bargain.

Eventually it would have been copied and your money would dissapear.

Me I would have sent you a clean 5000$ if you gave me the real Mccoy.

Public domain or not, if I had the working circuit.

But...Unfortunately you did not give me my overunity... Nope... I was really dissapointed.
Title: Re: I have working idea for 6000$ usd
Post by: nelsonrochaa on March 13, 2017, 09:58:48 PM
Probably I said that, to pay only 200$ for a free energy device sounds like a bargain.

Eventually it would have been copied and your money would dissapear.

Me I would have sent you a clean 5000$ if you gave me the real Mccoy.

Public domain or not, if I had the working circuit.

But...Unfortunately you did not give me my overunity... Nope... I was really dissapointed.

Sorry about my opinion , but maybe is your behavior that are not good, to you forward in your journey of your research but i admit that you have "balls"  to show the way you are in life in relation to that theme.
I could never have that behavior, even if I wanted it, because I believe in other kinds of values in life ,  But everyone has the right to change and you may change your thinking one day, attracting more positive things that will let you in the path off sucess .
Good luck
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 13, 2017, 10:47:28 PM
My favorite weather is a cold, rainy day.

Theres nothing more boring to me than holding hands and butterflies with the rainbow.

This is life my friend, overunity is in the mind of a single man, its one man, and his mind, on a quest for infinite power

There is no use in pretending that people here are my friends, if I insult you, you are not my enemy, if you say nice things to me, you are not my friend.

If I feel some distant character is valuable to me, I will take care of this guy and respect him, he rubs my back, I rub his back.

If you dont rub my back, what have you done for me lately? If you do something for me, now I owe you something, I have integrity.

Otherwise, no time for tentative and silly theorists, I dont wanna be here another decade reading bullshit.



Title: Re: I have working idea for 6000$ usd
Post by: nelsonrochaa on March 13, 2017, 11:33:17 PM
My favorite weather is a cold, rainy day.

Theres nothing more boring to me than holding hands and butterflies with the rainbow.

This is life my friend, overunity is in the mind of a single man, its one man, and his mind, on a quest for infinite power

There is no use in pretending that people here are my friends, if I insult you, you are not my enemy, if you say nice things to me, you are not my friend.

If I feel some distant character is valuable to me, I will take care of this guy and respect him, he rubs my back, I rub his back.

If you dont rub my back, what have you done for me lately? If you do something for me, now I owe you something, I have integrity.

Otherwise, no time for tentative and silly theorists, I dont wanna be here another decade reading bullshit.

Understand your point of view and I respect your way of thinking.
We're just who we want to be.


good luck
Title: Re: I have working idea for 6000$ usd
Post by: sm0ky2 on March 14, 2017, 12:43:32 AM
Ok Mr. Lawrence


You definitely have my attention
Twice per rotation, per crank, 100% of the tension force
of the rotating mass is applied parallel to the direction of
the crankshaft. (Milkovic Oscillating Fulcrum?)


Tandem two-stroke engines, using angular momentum instead
of a combustible fuel. Like reversing the gears on a grandfather clock
so two weights lift the 3rd and maintain the pendulum, extending the
runtime ^3rd. But unlike the pendulum, your model utilizes 360-degree
rotation, The force does not undergo Milkovic degradation. Rather, the center
of rotation moves as a whole, presenting no negative torque on the rotating
masses. (Chaos pendulum)


Newton's first and 3rd laws.
The larger the rotating masses, the more drive torque on the larger wheel.
I don't know about "ou" without physically testing this, but it definitely appears
to outperform a conventional worm-gear.
It's kind of like a play on the counterweight mechanism inside an electric drill.
Or an advancement rather


The true test would be done with one wheel.
One pair of rotating-crankers, 90-degrees apart.
and I would improve upon the crankshaft mechanism
giving it a more elliptical path
rather than a circular one.


Even in only two dimensions, this could revolutionize the way we handle
large scale machinery and construction equipment.
Not to mention its' applications in the energy industry or transportation.


Really in the entire manner in which we convert torque into motive force.
And vice versa.
Some degree of input is needed to bring the masses up to speed
and to maintain the rotation, but that is (or can be in the right situations)
irrespective of the torque applied to a secondary wheel or actuator.


Want to test this? Mount an imbalanced motor on a table
And measure the current through the motor both:
While the table is secured motionless
And while the table is bouncing around the workshop.


Now calculate the energy it takes to bounce the weight of the
motor and table around the workshop.







Title: Re: I have working idea for 6000$ usd
Post by: markdansie on March 14, 2017, 03:22:21 AM
I prefer to put other people's money where my mouth is, I have calculation overunity and hard design, I need other person's money. 30% is something I am happy with.

I need big money person, who gambles this type of money on a weekly basis.



The reason they are rich they do not gamble. They rather wait for proof of concept. You need something other than calculations to convince them.
Kind Regards
Mark
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 14, 2017, 03:33:45 AM
Who is scared to lose 5k besides a not so rich or a scared guy?

Whats this then...

https://www.youtube.com/watch?v=8NOs7zeQnIM

I want this guy, somebody get me this guy.

Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 14, 2017, 03:44:05 AM
https://www.youtube.com/watch?v=uMseCkFOPEc&list=PLvzT_VQykbfU8kJfEDTtdAhC8_ml5j4Sg

Somebody get me this lunatic Brad Booth.

Now that is a good business partner :o

I could use a guy like that, I hear these guys like startups... I got just the right kind or high risk high reward gamble for this guy.

Half the time these guys just get scammed anyways, whats the difference between deliberate scamming and honest attempt?

Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 14, 2017, 04:54:52 AM
Yeah Smoky...I see you see .

But you are not the only one to see. I know for a fact ( ok I say high probability) that a little weasel is attempting to steal my idea as we speak to verify the validity and even patent outright.

I need to hurry up to make sure he does not steal from me.

Me I don't care about patent, but if somebody try to patent my idea and claim it's his then you can be dam sure I wanna patent. This is the joy I feel when I see a cracker steal old granny's purse then trip him and the police come, priceless moment.

I am at a disadvantage, that's why I say to people.. Never be poor, if you are poor you can't build stuff.
Title: Re: I have working idea for 6000$ usd
Post by: TinselKoala on March 14, 2017, 06:46:52 AM
What part, I wonder, of OPEN SOURCE do you not understand?
Title: Re: I have working idea for 6000$ usd
Post by: Temporal Visitor on March 14, 2017, 08:51:27 AM
Ok Mr. Lawrence

You definitely have my attention
Twice per rotation, per crank, 100% of the tension force
of the rotating mass is applied parallel to the direction of
the crankshaft. (Milkovic Oscillating Fulcrum?)

Tandem two-stroke engines, using angular momentum instead
of a combustible fuel. Like reversing the gears on a grandfather clock
so two weights lift the 3rd and maintain the pendulum, extending the
runtime ^3rd. But unlike the pendulum, your model utilizes 360-degree
rotation, The force does not undergo Milkovic degradation. Rather, the center
of rotation moves as a whole, presenting no negative torque on the rotating
masses. (Chaos pendulum)

Newton's first and 3rd laws.
The larger the rotating masses, the more drive torque on the larger wheel.
I don't know about "ou" without physically testing this, but it definitely appears
to outperform a conventional worm-gear.
It's kind of like a play on the counterweight mechanism inside an electric drill.
Or an advancement rather

The true test would be done with one wheel.
One pair of rotating-crankers, 90-degrees apart.
and I would improve upon the crankshaft mechanism
giving it a more elliptical path rather than a circular one.

Even in only two dimensions, this could revolutionize the way we handle
large scale machinery and construction equipment.
Not to mention its' applications in the energy industry or transportation.

Really in the entire manner in which we convert torque into motive force.
And vice versa.
Some degree of input is needed to bring the masses up to speed
and to maintain the rotation, but that is (or can be in the right situations)
irrespective of the torque applied to a secondary wheel or actuator.

Another view of the same underlying principle I published as a GIFT in 2013 can be found here:
http://www.backgauges.com/Gen-E-Sys%20II/wpimages/wpc46ae8b1_06.png

That link is found on the "EVIDENCE" page and was given in addition to the written description which
describes another opposite method - of many very simple ways I found/see that can and do WORK.

There are far better ways, with less parts already built and tested.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 14, 2017, 05:32:22 PM
Hmmm...

I almost forgot about you...

Forgive me for past insults on your behalf.

If you understand the power god has given us then you must understand forgiveness.

I Propose that we restart our relationship.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 15, 2017, 05:56:14 PM
Micheal,

Can you do me machined parts for cheap? But dont screw up on the dimensions intentionally now...

If you dont have the time, I'll accept  money, I'll subcontract.

Since you asked me for 3000$, can I ask you for 3000$ ? Or is this only a one way thing?

I will pay raw materials if you pay for machine time. deal?
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 16, 2017, 06:08:34 AM
I now seek a banker. I believe a good  commitment of 20.000$ or more for in depth research of pseudoscientific flywheel phenomenon. Using innovative ideas and telemetry of all aspects.

Reading through Micheal s rambling I believe I have found
My own interpretations to  these words.

I believe I can synthetise the idea of a pulsed mass and isolated sytems that interact by elastic collision. In a flywheel  arrangement with pulley.

On these words I seek a truel useful and rigorous person  in the field of electronics, somebody with DEMONSTRATED ability to problem solve and create things or analyse dynamic systems mathematically and go deeply, mathematical people, physics, embedded electronics, rf people. Somebody who has written scientific papers? TinselKoala, Purely primitives type people.

To basicly start a blitzkrieg on areas of interest.

I wish to restart a project on Stephen Meyers since I have a circuit that can synthetise 3 phase with a good amplifier than could be stepped up. There is much work here and he gives an interesting read on his patent application. Stephen Meyers: hydroxyl on google

Somebody very motivated. Who is in the position of showing me his resume. Not just saying to me.
Title: Re: I have working idea for 6000$ usd
Post by: TinselKoala on March 16, 2017, 10:44:05 AM
Money motivates me. Show me your money.

I believe in the OPEN SOURCE philosophy and in this OPEN SOURCE forum. So it offends me slightly to be discussing money and proprietary ideas and NDAs on this forum. I think that anything posted here, unless specifically copyrighted, should be in the PUBLIC DOMAIN and should be available to anyone to work on, discuss, participate, reproduce, etc. FOR FREE.


By the way, the Innova Tehno "wurlitzer" device is a hoax, plain and simple.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 16, 2017, 11:26:11 AM
The banker will pay you much less than that, that's if there is one to be found. 500$ a month sounds good + the materials and gas and you have to produce.

We operate on a budget. Your job is to verify the Stephen Meyers patent application.

Let me make an old PCB file understandable it was a shit free software for a company that had cheap price.

The 3 phase circuit was my understanding of what a good PCB should have been. Analog, digital and 12 mosfetts on a single PCB, I did seperate the planes as best I could. Would that have flied?

Do you prefer Meyers or flywheel stuff? Me I need you to attack Meyers brother patent, that is your style. Flywheels engineering is more expensive, I could explain you a few things but there not enough budget for more than 1 flywheel engineer.

We will take decisions on faith of world after one of these technologies shows something. One step at a time.

Title: Re: I have working idea for 6000$ usd
Post by: TinselKoala on March 16, 2017, 12:40:33 PM
Money money money.
 :P
Title: Re: I have working idea for 6000$ usd
Post by: Zephir on March 16, 2017, 02:10:05 PM
@ARMCORTEX It's nonethical to abuse this forum for business projects: it's dedicated for free sharing of ideas and research progress - which is just what you avoid.
Try the crowdfunding market places like the Kickstarter, Indiegogo etc. instead.
Title: Re: I have working idea for 6000$ usd
Post by: Temporal Visitor on March 16, 2017, 05:06:20 PM
Money money money.
 :P

Actually both the original replies were very honest, fitting and far better.

He had it coming, you are being kind. ;D
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 16, 2017, 05:37:13 PM
Well I did not see the original.

I'm happy to see his current one.

But Tinsel, you have to be manageable and efficient with the bankers limited funds. This money will be given and you have to provide accountability.

The setup alone will cost alot.

Keep a cool head until something is found.

Look...Calm down people, we will share things later.

But to not be disturbed we work privately and with funding
Of people who can fund research. This is not free... Metal frames custom made, precision OB wheels, nice tube cell.,.

We work hard and invest in material so we can start working, we are not even at the point of that choice of moral decision.

Now we need banker who fully understands.
Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 16, 2017, 07:20:39 PM
Ok tinsel, if you act like a kid it will be hard to get along.

NelsonRochaa, how do you like : Stephen Meyers hydroxyl. ?
Title: Re: I have working idea for 6000$ usd
Post by: nelsonrochaa on March 16, 2017, 10:39:44 PM
Ok tinsel, if you act like a kid it will be hard to get along.

NelsonRochaa, how do you like : Stephen Meyers hydroxyl. ?

Hi ARMCORTEX ,
Many years have passed since my last experiences with production of hydrogen and by know don't have time because i'm working in other type of work but , i like a lot that subject. About Stan Meyer work , is much more then simple electrolysis because involve different approach in the way hydrogen is produced , but for sure you already know many facts about that . But sometimes i observe nice things :) in my tests with radiant energy , and even some people disagree about the existence of that and i respect their opinions ,  when well tuned, a resonant circuit may have curious effects that can be used for hydrogen production, but it is not envisaged in the near future i explore this topic.
Just to understand what i say  about some property of that resonant effect :
https://goo.gl/photos/jdp2J1UdPGAzdxhLA

greetings :

Nelson Rocha

PS -sorry by the quality of video but i think with some imagination you could figure out the capabilities of that type of demonstration 



Title: Re: I have working idea for 6000$ usd
Post by: ARMCORTEX on March 18, 2017, 04:45:24 PM
I referring to something new

as I am busy testing my mechanical ideas, I would like to find quality "hydrogen soldiers".

People that have been proven to be, very rigourous and capable of solving problems.

Investors should finance this persons entire cell and components if need be. People are free to make this
but a single, committed and skilled experimenter should have his build financed by the public because the cost of this special cell is gonna be in the 1000's... Like 900$... If this expert becomes cannot di it, it should go to any other volunteer. I say this because skilled people have grown frustrated and simply dont ever wanna commit themselves to hydrogen again.

https://www.youtube.com/watch?v=NTHxWpXI-WY

https://www.youtube.com/watch?v=f80CdFTf6f4

Now I have made a circuit to emulate this waveform, I dont belive the electron extraction effect or that the generator "eats" the electons and that it needs to be an alternator ( I have heard this theory before). I am saying that this waveform can be tottally synthetic with electronics and less cumbersome than some double alternator running at 400 Hz... Altho I am now unsure if that is true,\? 400 hz?? I believe it was mostly a noise issue back then, at night 3 AM in apartment etc...

I use class A amplification with differential xformer, 6 of them, mosfet, self equalizing bias, and abnormal 22 volt dual rail supply or 18 volt, I cant remember, 50% loss, but this is a choice  I made because I dont want the mofset commutation to happen.

I wanted nice clean sine. I chose voltage feedback also, this means shielding and twisted wires.

I will seek the pcb file and polish the delivery, the pcb is now unclear to me.

I have left the patent here, can you analyze it, how do you think it can be to match the electrical wavelenght? Is his circuit an antenna tuner? His cell looks very advanced, this is unexplored territory.