Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Dual energy generation with magnetic seesaw system and gravity  (Read 25774 times)

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
This technology is based on magnetic repelling principle .We can generate electricity with very little force with the help of this technology.This will be a radical step in the field of energy generation.

In this technology there will be a balance system and two heavy weight magnets will be attached with each side of this balance system as per diagram.
As per diagram there will be two moving weights and these moving weights will move on tracks.These tracks will be fixed at the angle of 8 to 10 degree.
Two magnets will be attached on the front side of these moving weights and these magnets will have similar polarity with the magnets of balance system.
These moving weights will be attached with two gear boxes and these gear boxes will be attached with two generators.

HOW THIS TECH WILL WORK?

When one side heavy weight magnet of balance system will be pressed with the help of any kind of external force then this side will come down and repel its side moving weight due to equal polarity of magnets.due to repelling the moving weight will move forward .but when the heavy weight magnet will move upward then this moving weight will move backward due to gravity to get its position back.
in this way this moving weight will work to run a gear box and this gear box will work to start a generator to generate energy.
This balance system will also work to pass through their side copper coil due to linear movement and in this way this technology will generate Dual energy.

I would like to insist on some following points
(1) The balance system will be attached with 'L' form crank with external PRESSING source.
(2) The moving weights will also be attached with 'L' form crank with gear boxes.
(3) Each side magnet of balance system will work one by one .When one side magnet will come down the another side magnet will move up .These magnets will come down and move up one by one to repel their side moving weight.
(4) We can take as much weight as we can of these magnets of balance system .(500 kilogram to 1000 Kilogram or more).
(5) External source of pressing this balance system could be anything such as pressing with foot  or solar cell. WE WILL NEED ONLY 3 VOLT EXTERNAL ENERGY TO PRESS THIS BALANCE SYSTEM  AND GENERATE MORE AND MORE ENERGY.

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #1 on: August 31, 2016, 07:03:45 AM »
I have done some experiment and have got initial success which is an indicator that this machine will work definitely.A great success in energy generation.

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #2 on: August 31, 2016, 07:17:13 AM »
This machine is an open challenge for everyone and my initial success with repelling  heavy weight with very little force  is a milestone to develop this technology.

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #3 on: August 31, 2016, 11:34:10 AM »
Can you please scale down your images before you post them? Or change the photo setting on your camera to a lower resolution?


Thanks.


Vidar

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #4 on: September 03, 2016, 03:53:27 AM »
 Please comments on this Idea .This machine will work definitely and I have got initial success but I'm facing problem of some resources like high power magnets  to develop it completely .If someone in this community has resources then try it and publish the result.A great concept with No flaws   to make a PERPETUAL MACHINE. Please support me to develop it.

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #5 on: September 04, 2016, 10:19:37 PM »
Please comments on this Idea .This machine will work definitely and I have got initial success but I'm facing problem of some resources like high power magnets  to develop it completely .If someone in this community has resources then try it and publish the result.A great concept with No flaws   to make a PERPETUAL MACHINE. Please support me to develop it.


I have a bunch of relatively large neodymium magnets, different sizes. I can build your device one day, and see how it works.
And you can ofcourse quality check the device by pictures I provide untill you're satisfied.


I can buld it when I have time to spare. I have a metal wheel with ball bearings - which I can put weights/magnets on to make it unbalanced. I have springs, hinges and other materials.
Are you interested in letting me build one for you? If so, please provide a little more detailed drawing than the post above.


Br. Vidar.

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #6 on: September 05, 2016, 07:02:52 AM »
Dear sir,
Thank you very much for your support.I will send you a detailed sketch of this Idea very soon.
 Thank you Sir

vikram kumar Gupta

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #7 on: September 07, 2016, 09:20:18 PM »
Dear Vidar sir,
I'm sending  two sketch regarding this Idea.
 In the first sketch we will take high power magnet (High magnetic strength NEODYMIUM Magnets) and both magnets will be attached with a SEESAW system. These magnets will work to repel their side ordinary (FERRITE low strength )magnets  due to equal polarity. Two generators will be attached with these ordinary magnets.
These ordinary magnets will move on a track as per sketch and will be heavy.

In the second sketch we can take several arms SEESAW system to repel several ordinary magnets to generate more and more energy as Input energy is almost none so I think this Idea will be  a mile stone  in the energy generation. A REAL WORLD PERPETUAL MACHINE..
I hope you will support me to develop this technology.

Thank you Sir.

Vikram Kumar Gupta

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #8 on: September 08, 2016, 09:27:56 AM »
This device will  as input force is almost nil and these heavy weight Neodymium magnets will work to repel their side  weight .Though each side will have equal repelling force but acceleration also depend on mass.

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #9 on: September 08, 2016, 11:02:37 AM »
Hi There,


I find it a little bit hard to fully inderstand the physical construction.


The two springs, are they resting on a surface? Are they in tension, either stretched or squeezed?
Are the neo-magnets attached to the springs, resting on a surface?


The three "fingers" on each side, with magnets on them, what type of magnet are the other 5 magnets?
I see that you have labeled the lower right magnet as neo-magnet, but what about the others?
Are each of these "fingers" hinged to one and the same point?


What makes the incline of the "normal" magnets possible?


Must I use an exactly 3V motor? Is it a pendulum attached to this motor, and where is this pendulum attached to the lower structure?


As you understand, the drawing has major lack of essensial details.
I am not good in reading instructions, but much, much better in analyze drawings.
These drawings are somewhat deficient, so I cannot quite understand the connections between all parts.


Why do I have to use some ferrite magnets, and some neo-magnets?
Can't I just use neo-magnets all over? I do only have a bunch of neo-magnets - hundereds of them.
I have no ferrite magnets except for a couple of large speaker magnets...


I have motors in different sizes, however, they are brushless motors, that runs on 3-phase AC from the electronic speed controller,that I use on my RC-airplanes.
These can also be used as generators off course.


Would a simple coil/magnet assambly work as well as generator and "motor"?
That would make it easier, and with less friction. As the "generator" will generate power to the "pendulum-motor" almost without loss - and it is fully synchronized.


Do you have Google Sketchup? If not, download Sketchup Make (the free version). I use this software to make all the models I use for 3D printouts.


Vidar



Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #10 on: September 08, 2016, 11:14:07 AM »
The mass of all the parts might not be ann issue, but as soon as you load the power output, the inertia in the mass will not longer work synchronized.
In other words out of phase (delayed). That means that all the parts that are suppose to deliver energy, will have a lag that finally will stop all motions.
Maybe this is not an issue with this construction, but I just had an idea that it will happen.
IF the device deliver more energy out than what you put in, it would fight the lag with ease. Let us hope so :-)


Vidar

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #11 on: September 09, 2016, 08:32:38 AM »
Dear Sir,
This device will work definitely as it will deliver more output than input . I will send you complete details and clear your all doubts very soon.

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #12 on: September 09, 2016, 09:47:27 AM »
Dear Vidar Sir,
 please do a simple experiment .Just take a 60 kilogram weight and attach high strength Neodymium magnet  with this weight and take another 600 gram weight and also attach neodymium magnet and repel them if this 600 gram weight is obtaining  3 to 7 meter /second speed then it is clear that  this machine is going to  work 101% definitely.
Please do it and I'm also preparing  details of Instructions so that you could understand this device completely.
Thank you Sir for your interest. 

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #13 on: September 09, 2016, 10:21:11 AM »
Dear Vidar Sir,
 please do a simple experiment .Just take a 60 kilogram weight and attach high strength Neodymium magnet  with this weight and take another 600 gram weight and also attach neodymium magnet and repel them if this 600 gram weight is obtaining  3 to 7 meter /second speed then it is clear that  this machine is going to  work 101% definitely.
Please do it and I'm also preparing  details of Instructions so that you could understand this device completely.
Thank you Sir for your interest.


So:
I fasten a neodymium magnet to a heavy weight
I fasten a neodymium magnet on a light weigt
Then let the magnets repel eachother so the weights moves in opposite directions


I assume the light weight will move faster and further than the heavy weight.
however, the light weigt and the heavy weight are applied with the same potential energy, and during motion have kinetic energy that is equal, but at different velocities.
Kinetic energy is mass multiplied with velocity^2. If the 600 gram weight moves at 10m/s, the 60kg weight will move at 1m/s in the opposite direction.


Kinetic energy of the 60kg weight will be 60kg x 1m/s^2=60 joules
Kinetic energy of the 0.6kg weight will be 0.6kg x 10m/s^2=60 joules


The energy in both are the same and opposite, so there will be no extra output....in my brain it will work like that.


Or have I misunderstood the concept totally? Please make a drawing of the weights and magnets you described (And post a small picture ;-)


Vidar

vikram_gupta11

  • Full Member
  • ***
  • Posts: 204
Re: Dual energy generation with magnetic seesaw system and gravity
« Reply #14 on: September 09, 2016, 06:31:39 PM »
Dear Sir,
You have misunderstood this what I want to tell you. As I' m preparing complete details regarding instructions and a sketch  so  could you please tell me that  what are the shapes and sizes of neodymium magnets  which you have  and please also tell me  magnetic strength of these magnets.You are right that each magnet will repel each other magnet with equal force but you are neglecting the work of a Balanced SEESAW system which will consume very very less energy or input . I have done some work on a seesaw system and it will work as it will consume very less energy and if this balanced seesaw is working to repel a 600 gram magnet with the speed of 10m/sec then the output is more than input  and then there is no doubt about the feasibility of this machine as all things are clear.