Free Energy | searching for free energy and discussing free energy

News announcements and other topics => News => Topic started by: Igor48 on May 15, 2016, 12:03:09 PM

Title: Working magnetic generator
Post by: Igor48 on May 15, 2016, 12:03:09 PM
WORKING MAGNETIC GENERATOR
Cut the stator’s magnets and change places



 


 

Title: Re: Working magnetic generator
Post by: Igor48 on May 15, 2016, 12:05:49 PM
The amount of stator’s axis can be increased  till 8; 10; 12.
Title: Re: Working magnetic generator
Post by: Igor48 on May 15, 2016, 12:07:33 PM
360 /6 axis = 60 degrees step => 60 / 12 layers of the magnet = angle of 5 degrees step of every stator’s magnet. Turn the rotor’s magnets in hand of drive direction. The magnets of stator turn in moving redactor direction.  The assemblage of stator for reduction gear  № 2 is  in counter-clockwise direction and the magrents are turned in 180 degrees.
Title: Re: Working magnetic generator
Post by: Igor48 on May 15, 2016, 12:08:42 PM
The general view
Title: Re: Working magnetic generator
Post by: Floor on May 15, 2016, 03:50:20 PM
@Igor 48
I like the concept over all, but atmit I have not studied it in detail. 
               floor
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:48:20 PM
Okey let’s start from the beginning

Axis №1 and №3 are fixed. The magnets on the axis № 2 are turning on 180 deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:48:51 PM
Axis №1 and №3 are fixed. The central magnet is turning on 180 deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:49:29 PM
The force field of the magnet № 1 is from left to right direction. The force field of the magnet № 2 is directed from the centre to the edge of the magnet.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:50:06 PM
Cut the magnets and interchange their position.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:51:34 PM
Gearbox for 3 circle magnets. The central magnet is cut on the sides for force field reduction.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:52:01 PM
Adding 4 axis with magnets. The angle between axis is 60 deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:53:35 PM
The Variants of gearboxes.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:54:23 PM
Multi-leveled magnet generator for gearbox №1.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:57:55 PM
The general view of magnetic generator.
The generator's body is not shown.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:58:41 PM
The rotor and stator's magnets in cut for gearbox №2. The 'A' rotor’s magnets are turned in clockwise direction in series, 5 deg. step. The 'B' rotor’s magnets are turned in counter-clockwise direction in series, 5 deg. step.
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 01:59:17 PM
The ‘B’ stator’s magnets are turned in clockwise direction for gearbox №1.
Title: Re: Working magnetic generator
Post by: MagnaProp on May 17, 2016, 02:04:48 PM
Why do we need the inner set of magnets?
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 02:28:50 PM
Why do we need the inner set of magnets?
Title: Re: Working magnetic generator
Post by: Floor on May 17, 2016, 02:46:13 PM
@Igor 48

Two more Question

1. Have you done some kind of computer modeling of the interactions ?

2. Is there some partial build of the device that you could do, and that
would serve as proof of concept ?

                       floor
Title: Re: Working magnetic generator
Post by: Igor48 on May 17, 2016, 04:11:58 PM
1) This is a computer modeling built on 7 years of experiments with magnets (NdFeB). I made a hand made CNC router for these experiments.
2) There is no device since professional CNC router with high precision is needed but there is no such a staff in my hometown.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:13:39 PM
                        THE THEORY OF MAGNETIC ENERGY
The centre of axis always corresponds to the centre of magnet volume.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:15:31 PM
The sphere of the magnet’s force field.
The magnet is a compressed spring without losing its mechanical characteristics. The only exception is a thermal heating which demagnetize the magnet. The magnetic field doesn’t have precise metes and bounds; the sphere of the magnet’s force field is the most important. The field’s force is multiply decreased removing from the central point of origin of the magnet.
The cut of the magnet’s force field is on the picture below.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:16:32 PM
EXPERIENCE HAS SHOWN THAT
The equation of magnetic well.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:17:38 PM
The pressure of magnet is 4 kg /cos.= 0,3kg progression vector.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:18:34 PM
STATOR MOTION
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:19:24 PM
Variants of shielded stator
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:22:05 PM
NUMBER SERIES: rotor 4 - 5 stator.

Stator SN – NS rotor, rotor progression clockwise
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:23:02 PM
Stator NS –NS rotor, rotor progression counterclockwise 
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:23:58 PM
 NUMBER SERIES: rotor 6 - 7 stator; rotor 8 - 9 stator…
 
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:25:06 PM
MAGNETIC  GENERATOR

The centre magnet turns on 180deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:27:13 PM
The principle device work.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:29:38 PM
The principle device work.
Video attached
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:31:13 PM
Upgraded device.  The magnets work relatively to the edge.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:31:59 PM
Variants of the magnet work relatively to the plane.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:32:52 PM
Work space 70+70=140deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:33:38 PM
Device for modeling the force field’s diagram.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:34:20 PM
The force field’s diagram.
The working space is divided on the 1 step deg. points; from 0 to the angle 90 deg. The force field’s diagram can be built by the points. Cut the magnet’s force field and shield it with magnets. For example the A zone is from 60 till 90 deg; the B zone is from 75 till 90 deg.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:35:19 PM
 Cut and exchanged magnet.  Work space of 170+170=340deg.

The variants of shielded and miniaturized force field of the magnet 
                                                                                                                                             
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:36:06 PM
The amount of the stator’s axis can be 8,10,12…
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:37:25 PM
Now you should return to the topic’s beginning.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:38:37 PM
An addition to the magnetic generator.


Pressed magnetic wells without losing magnet volume
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:39:23 PM
Shielded stator, up and down motion
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:39:52 PM
Rotor 
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:40:44 PM
The maximum efficiency of the generator depends on the size of the rotor and stator’s work space which is close to 360 deg diameter.
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:41:22 PM

Metallic body + magnet force field 4kg = magnet force field 28kg
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:42:02 PM
Magnetic bearing.   The magnets are stationed relatively each other crosswise.                                                 
Title: Re: Working magnetic generator
Post by: Igor48 on May 22, 2016, 12:42:41 PM
The magnetic generator with counter magnets motion.
Title: Re: Working magnetic generator
Post by: Igor48 on May 25, 2016, 11:45:06 AM
gear box 1

Magnet №1 D24 force field normal = 14kg
Magnet №1 D24 = D gear №1; D gear №1 = D gear №2. L38/R12 = 3.2 force.
Title: Re: Working magnetic generator
Post by: Igor48 on May 25, 2016, 11:46:29 AM
gear box2


Magnet №2 D16 force field maximal = 14kg
Magnet №2 D16 = D gear №1; D gear №1 = D gear №2. L42/R8 = 5.2 force.
Title: Re: Working magnetic generator
Post by: Igor48 on May 25, 2016, 11:47:57 AM
CUT CENTRAL MAGNET