Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: real free energy with capacitors thru inductance  (Read 50692 times)

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #90 on: February 17, 2017, 09:36:28 PM »
Tesluh
The amp meter was just to show the current comming out of the ground and when it stops. The switch was the simplest way to dump the caps. Each caps polarity was reversed so a current control /polarity problem .I set up a new configuration using a inverter a Variac a hivoltage car coil and bridge diodes . I wasn't happy with the charging speed or the number of cap I could charge at once. But this was faster and I got to five caps. There was an option that said just the hivoltage was needed but that's not true it's both hivoltage and good supply current .as one to one proton to electron . always use. A neon or two across the terminals for safety stoping it at 90 volts.mine was charging faster and more but dumping at 90 volts.Jim out.

Tesluh

  • Jr. Member
  • **
  • Posts: 64
Re: real free energy with capacitors thru inductance
« Reply #91 on: February 21, 2017, 07:34:30 PM »
I tried this and haven't been able to get it to charge yet, power seems to stop at my rectifier and the wire to the cap is not energized.  I may have bleed resistors in my capacitors, I should check them.  I only have one ground rod, did you say you had better results with 4 ground rods?  Also saw you were using "a Variac and a car high voltage coil with a diode . with a good earth ground"

I have a car ignition coil I could try it with, is it just car coil output connected to diode connected to capacitor #1 plate and the rest the same as your drawing?  I might go find some motor run caps that for certain don't have bleeder resistors.

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #92 on: February 22, 2017, 01:39:09 AM »
Hi tesluh
Start with just one cap get that working first check your ground .yes good grounds are better use 119 volts DC put a neon across the cap leads when it hits 90 vdc it fires off the charge .it's also a safety .it's a little slow .put a analog meter in line with the ground to see charging going on.use oil filled motor caps with a Hi voltage rating like 340 or 440 v.don't mess with the car coil and veriac first just get the parts right first .when you do use the car coil make sure you have the verac turned it to off then slowly adjust up .. Yes no bleed resistors .your caps should hold a charge or no good..always keep a neon or two across each cap so you don't over load it and blow it up .there like land mines. Keep pecking away at it you'll get it.somethings off .saw your diagram finely the three caps how are you going to release the charge ? The neons do that automatically for you. Jim out

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #93 on: February 22, 2017, 01:43:36 AM »
Are you using a bridge rectifier ? Because if only one diode one side of the inverter is cold the other hot .find hot with a neon connected to ground .the cold side doesn't glow.it's not a true neg source..

Tesluh

  • Jr. Member
  • **
  • Posts: 64
Re: real free energy with capacitors thru inductance
« Reply #94 on: February 22, 2017, 02:44:21 AM »
Yes I tried two different rectifiers and finally built a bridge out of (4) 1n5408 diodes.  I'll check it with the earthed neon bulb and see which side glows.  going to order some motor run caps...  Thank you for answering my questions!

Tesluh

  • Jr. Member
  • **
  • Posts: 64
Re: real free energy with capacitors thru inductance
« Reply #95 on: February 23, 2017, 08:41:07 PM »
I measured 108v across + and - of diode bridge, positive lead would not charge my capacitor as far as I could tell, I also tried to charge a motor run cap and no luck there either.  My ground rods might be the issue.

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #96 on: February 23, 2017, 10:55:49 PM »
Might be try the house ground the small round hole in you electrical out let .then if you have a old phone line try the outer maltalic shielding not the wires that shielding is supposed to be very good. If you have a pipe going into the ground some were like water or well .108 DC is workable .you got the analog amp meter in line and set to low est setting you will see it.if you go to a scrap yard you can pick up motor caps for almost nothing. Try just charging your caps with the 108dc directly that has to work or the caps screwed .if your using grounds rods can you put salt and water down in the earth with them?

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #97 on: February 24, 2017, 01:32:57 AM »
It's probably the inverter I tried several that were hivoltage that didn't work lucky the working ones are cheep truck stop inverters for simis  I got a 400 watt unit for 15.00 on sale .just use your wall electrical outlet .cut a cord and plug off a though out and make one lead shorter than the other to minimise the chance of a short out. Use the ground in the wall outlet put a screw driver in the round ground hole and a wire cliped to it now attach a neon onto the ground now plug in the he coard and touch each line just once that will give you the hot line tye a not in the hot line .unplug it and the a not in it .now your hot will work wire in your bridge diode connect the ground. Put the neon across the cap terminals .leave the negative disconnected.
If you're concerned about the set up use a wall switch controlled outlet .this will confirm your set up and that you need a different cheap inverted. The cap will only charge up to the level of the neon 90 volts dc but if you are not using the DC bridge rectifier you will have a short to ground and pop a circuit bracker those diodes have to be functional to stop the current ..if it stays on seemingly it might be charging and discharging so fast you can't see it don't keep using this set up use a cheap inverter to limit the power .that plug has between 10,000 and 20,000 Watts behind it just waiting for you to frac up..just verify and that's all .and don't use it again.way to much potential for trouble.Jim out.

Tesluh

  • Jr. Member
  • **
  • Posts: 64
Re: real free energy with capacitors thru inductance
« Reply #98 on: February 26, 2017, 04:34:05 AM »
I tried using the wall outlet and blew the gfci, would need to put it on a dedicated non gfci circuit to try it, otherwise I have apile of different inverters here I can test with.

jimbo

  • Full Member
  • ***
  • Posts: 137
Re: real free energy with capacitors thru inductance
« Reply #99 on: February 26, 2017, 09:31:41 PM »
Been off grid so long for got about gfic .not part of my life now  :o