Free Energy | searching for free energy and discussing free energy

Mechanical free energy devices => mechanic => Topic started by: antimony on November 23, 2015, 12:01:57 PM

Title: Building the Lawrence Tseung generator?
Post by: antimony on November 23, 2015, 12:01:57 PM
Hi, i am reading Patrick J Kellys book, chapter 17 i think where he explains how to build the Lawrence Tseung generator wheel, and i have decided to start gathering the parts to make it myself in the future.

http://free-energy-info.co.uk/Chapt17.html

I think it suits me well as i am used to work with wood, and it seems like a pretty simple, but effective unit, that also can be modified in the future.

I have been thinking about making an Adams motor, but i think this is more on my level of skill, as i am new to this.

What i wanted to ask is if someone else here or if you know of someone that have built this unit themselves?

And also, in your opinion, is this a good project for me as a beginner, or do you have something else in mind that might be better?

I am making a Bedini SSG right now, so this project will in fact be my second when i get the SSG done.

What do you think guys? 
Title: Re: Building the Lawrence Tseung generator?
Post by: FatBird on November 23, 2015, 02:57:40 PM
Personally, if I were to build something, I would build the Adam's unit using a BICYCLE wheel,
due to it's low cost & simplicity.  Cheap bike wheels can be found at swap meets, yard sales, etc.
PLUS, Bike wheels spin really easy due to almost no bearing drag.

If you decide on duplicating the Tseung unit, then I would still try doing so with 1 or 2 bike wheels.
Bike wheels have a large diameter which should translate to more power out, compared to using
small diameter wheels.

https://www.youtube.com/results?search_query=adams+motor+generator (https://www.youtube.com/results?search_query=adams+motor+generator)

http://www.angelfire.com/ak5/energy21/adamsmotor.htm (http://www.angelfire.com/ak5/energy21/adamsmotor.htm)
                                                                                                                                                   .
Title: Re: Building the Lawrence Tseung generator?
Post by: Paul-R on November 23, 2015, 07:38:00 PM
Personally, if I were to build something, I would build the Adam's unit using a BICYCLE whee                                                                                    .
Do you mean a Robert Adams generator?
Title: Re: Building the Lawrence Tseung generator?
Post by: FatBird on November 23, 2015, 09:39:17 PM
                                                                                                                                                        .
Title: Re: Building the Lawrence Tseung generator?
Post by: antimony on November 24, 2015, 09:56:40 AM
Personally, if I were to build something, I would build the Adam's unit using a BICYCLE wheel,
due to it's low cost & simplicity.  Cheap bike wheels can be found at swap meets, yard sales, etc.
PLUS, Bike wheels spin really easy due to almost no bearing drag.

If you decide on duplicating the Tseung unit, then I would still try doing so with 1 or 2 bike wheels.
Bike wheels have a large diameter which should translate to more power out, compared to using
small diameter wheels.
                                                                                                                                        .

Hi Fatbird. Thanks for the reply.

I was thinking about putting in one rotors at first, and then put in an additional one or two rotors in the Tseung generator, but using bicycle wheels is a pretty nice idea that i haven´t thought of. I´m going to think about that one.

I checked out the Adams motor a while back. It seems like a fun project that i would like to take on in the future, but what i liked about the Tseung generator is that it was make out of wood, and it seems pretty simple so its suitable for a beginner.
But i guess that some parts of the Adams motor also could be made out of wood, and bicycle wheels too.
Is it yours, the one in the first picture?

Which one is the most "simple" for a beginner to make, the Tseung generator or the Adams motor?

Ps. I have a car alternator that i was planning to rewind and make a wind turbine, or maybe a homemade gas generator, but now i came to think that it may be used in the motor some how. Any ideas?

Title: Re: Building the Lawrence Tseung generator?
Post by: antimony on December 13, 2015, 12:11:48 PM
I have made some progress since last time i posted here.  I should maybe post a picture if someone is interested.

My first thought was to try to replicate the Lawrence Tseung generator, but i didnt have the material to make it that big,  so i came up with my own "design", and that is a great bit smaller.

In this first version i am going to use Bedini circuits to drive the bi-filar coils.
In Patrick Kellys diy guide he wrote that Lawrence Tseung used Roger Andrews switching in the generator system,  and that is basically the same as the Bedini circuit. Feel free to correct me if i am wrong, i would be very greatful.  :)
What differences are there between the Roger Andrews switching and the Bedini?

Thanks guys.  :)
Title: Re: Building the Lawrence Tseung generator?
Post by: antimony on December 25, 2015, 12:41:50 AM
Hi again. I just wanted to ask real fast about the difference of driver coils,  pick-up coils and timing coils.
After this weekend i am going to order a few 1 kg spools of magnet wire to make a few coils for this project among other,  and the different types of coils are sort of confusing to me,  so i wanted to ask if someone knows of some source of information regarding this?

I also wanted to ask if you think it would be possible to make this generator,  but with just half the number of magnets, 8 instead of 16 magnets total, and also if i have the room för it, 6 or 8 coils?

I have designed and made a motor frame that is out of wood, with a much smaller diameter rotor that i was going to make into a ssg,  but lately i have thought about making something else with it. 

Thanks in advance. 

Title: Re: Building the Lawrence Tseung generator?
Post by: ltseung888 on June 03, 2016, 11:48:05 PM
http://overunity.com/15077/ufo-propu-engine-closed-loop/msg485521/#msg485521

Use DSO to see waveform of the negative energy...