Author Topic: "Free Energy for Dummies" (Read 16355 times)

stonrman401 · « **on:** October 06, 2006, 12:42:28 AM »

I want to see if there are any legitimate owners of a device here. I have seen some claim "this works!" or "that works!" but it's obvious not everyone understands the parts.

I play with 3d studio in my free time and want to offer someone out there a CHALLENGE.

This is only addressed to the people who have it but keep quiet, or have it and don't care about patents, or have it and want to share it, but aren't sure of the best way.

I'd like to design such a device in 3d, given that you WORK WITH me on this, giving the sizes and where they should be placed (pictures from front, side and top views would make it 90% easier) and measurements, angles. EVERY possible detail provided. As in, what is this part? I could color code it and there could be a key in pictures, or even in a 3d movie.

As far as I understand it, this could be quite easy since it seems most "designs" (Id like to start working on one myself, just looking for someone to point the right way!) have magnets cut to specific sizes, specific shapes like squares, tubes, copper coils, cylinders... that stuff is easy to make in 3d.

Ive been working and going to school a lot so I dont play with it all the time, but I have some time and I would love to devote it to this project.

So, if you are interested drop me a line: stonrman401@gmail.com

And here are examples of some work Ive done

http://visualorgasmness.50megs.com/pmm/
http://visualorgasmness.50megs.com/images/

Someone gave me a number and even offered to pay me, but the number wasnt working and they never mailed me back.

Look, Im not asking for money. Knowing you have a working device and want to help others to build it is enough. Show me the way, Ill put it in media, and then go buy parts and make it a reality for myself. That would beat any amount of money you could offer.

I'm not interested in those waiting for patents, or some gibberish. What I want is either a motor that can keep running on just magnets, or a device that provides electricity. If you are willing to provide specs, sizes, angles, correct placement, and all details you can.... then Im more than willing to put it into 3d.

Any takers?

FreeEnergy · « **Reply #1 on:** October 06, 2006, 12:56:51 AM »

could you please see http://www.overunity.com/index.php/topic,894.0.html

it is not a very hard design to make.

stonrman401 · « **Reply #2 on:** October 06, 2006, 02:06:43 AM »

It looks interesting and simple, do you have a working model yourself? Can you say it works?

I mean, let's be honest. Theory is good and all, but it seems a little sketchy to me that some people say they have it, say it can be replicated, yet there is still this language gap between the world. wtf?

I mean, I could make this in 5 minutes, which I am doing now. Im looking for someone with a real device who wants this though.

As for yours, if you actually have one, is there a way you could provide accurate measurements on the track, wheels, steel rods, square wheel, etc?

I mean, otherwise we're still at square one. But Ill model it

FreeEnergy · « **Reply #3 on:** October 06, 2006, 02:18:27 AM »

sorry dont have an actual working model.

also if you understand the device's operating principles i dont think measurements on the track, wheels, steel rods, square wheel, etc would be an issue for you.

peace

FreeEnergy · « **Reply #4 on:** October 06, 2006, 02:21:34 AM »

Quote from: stonrman401 on October 06, 2006, 02:06:43 AM

I mean, I could make this in 5 minutes, which I am doing now.

cool i can't wait to see it

stonrman401 · « **Reply #5 on:** October 06, 2006, 03:12:09 AM »

First I want to point out that I realized I missed a key point from your pictures, in that there are 2 wheels (or 2 sets of wheels) on either side of the steel bar, and that it is constructed in such a way that the steel can only point one way, instead of just go in any direction. So I wanted to make note of that. This bothered me while working on it until I looked at the pic again and was like DUH! well Ive spent too much time on this, here ya go.

http://visualorgasmness.50megs.com/pmm2

The green opaque thing is supposed to be a "track" of sorts. I had in mind a plastic thing that held the wheels and went around the square wheel. The rest of the parts should be pretty obvious. Images 5-7 are just different angles of the same thing.

This is as far as I wanna go with things that havent been tested. For those who have device, please realize I could make it look MUCH more graphically appealing, and animate it from all angles as well. PLEASE someone with a working device drop me an email stonrman401@gmail.com

The link I just posted is an example of what Im willing to do for FREE as long as I have a beer and a joint handy!...

Speaking of which...

Anyways. Yeah. Drop me a line. Let's like, save the fuckin world already

I want you guys to realize I can replicate sizes right down to the POINT. It could perfectly represent a real device, taken apart, put back together. Even if I dont know what the hell the part is, just tell me the size and where it goes. It can be bumpy, shiny, I can use more realistic camera settings... From all Ive researched on free energy, and all Ive seen about the growing disclosure project issue and steorn, all I can say is I am sick and tired of waiting and having my beliefs/mind fucked with from all ends. ESPECIALLY when I see people on the internet saying "I have it, but really, Im not telling..." What a waste! Come on people lets make this a reality!

So Im leaving it up to you inventors, for a FREE designer willing to cooperate as long as youre willing to share with everyone. Otherwise, you can shelve it, and I can just go make 3d movies for disney and we can live lesser lives than what could have been....

Yeah I know, I talk a bunch of crap. Oh well. Im just tired of waiting... adios guys! Someone out there in cyberspace get back to me... before the FBI comes to dump me

FreeEnergy · « **Reply #6 on:** October 06, 2006, 03:19:49 AM »

thanks for trying though.

peace

FreeEnergy · « **Reply #7 on:** October 17, 2009, 09:00:25 AM »

i just stumbled across this thread, its been a long time, my wheel did not work, does not work, and probably will never work.

but there must be a way some how!

maybe.

stonrman401 · « **Reply #8 on:** October 17, 2009, 03:02:41 PM »

Yeah... I must have posted this a long time ago...

Im thinking these days fresnel lenses and miniaturized steam pistons are the promise for the common man. Sun is very reliable and storing energy is possible for cloudy days.

Im considering testing a theory soon when I can find some small mirrors: Parabolic mirrors work on the principle of aiming the sun's reflection using many mirrors onto the same spot. Fresnel lenses are a smaller more precise version of this principle. An 8" x 11" fresnel lens can melt a penny in under 2 minutes. A 3' x 4" one has shown on video to overclock a digital thermometer at >3000 degrees.

But you can't hold two fresnel lenses up and point the beam at the same spot. What IM wondering is what if you use a single large mirror to aim the sun's direction at the second lens, hold it in a different angle and in that way focus the sun's beam on the same spot. Could it melt a penny in under one minute? And let's say you apply the principle tenfold.

If you can create as much heat as one could imagine with this simple idea, we are very well on the way to sovereign free electricity from the sun, anywhere, anytime. If not that, at the least clean water even from the ocean, and heat for homes even in bitter -0 degree winters.

Anyone have any thoughts on this idea?

Cloxxki · « **Reply #9 on:** October 17, 2009, 03:46:30 PM »

Very noble offer, I hope you'll keep it up to the day someone does come with a device that works.

Your lenses and mirrors idea is interesting.
Can you model lenses and mirrors on the computer? It may take a custom shaped mirror to do what you're proposing, and possibly take the adjustability out of the setup. But if it works, it works. 3000C? Let's burn some water!

luckylachs · « **Reply #10 on:** October 17, 2009, 11:44:33 PM »

careful . the links posted by stonrman401 lead to virus infected files ! got 2 warnings

http://visualorgasmness.50megs.com/pmm/ //lead to infected picture files
http://visualorgasmness.50megs.com/images/ //lead to infected picture files

FreeEnergy · « **Reply #11 on:** October 18, 2009, 07:44:04 AM »

stonrman401 · « **Reply #12 on:** October 18, 2009, 01:25:47 PM »

Quote from: Cloxxki on October 17, 2009, 03:46:30 PM

Very noble offer, I hope you'll keep it up to the day someone does come with a device that works.

Your lenses and mirrors idea is interesting.
Can you model lenses and mirrors on the computer? It may take a custom shaped mirror to do what you're proposing, and possibly take the adjustability out of the setup. But if it works, it works. 3000C? Let's burn some water!

Heh. Im not so sure I would need a custom shaped mirror to reflect the sun into a fresnel lens. That's the beauty of all this, is it's so simple and easy. One thing is certain I need to find a place that sells small cheap mirrors

and to the person who said there's a virus in that link I dunno what youre talking about... wow seeing this thread is so weird I must have posted it years ago.

0c · « **Reply #13 on:** October 18, 2009, 06:05:45 PM »

@stonrman401,

I don't think you'll find that "working" device you are looking for. There are lots of claims, but when it it comes down to a scientifically convincing demonstration, they all fail ... at least so far. (If anyone here knows of an exception, please speak up.)

Now that the disclaimer is out of the way, I happen to be working on a design for an interesting device which I am trying to complete. And I am artistically challenged, so I would welcome any graphical assistance you could provide.

The design is significantly more complicated than the magnet-gravity wheel you did for FreeEnergy. A subset of the design has already been implemented and interesting behavior has been seen. My objective is to eventually complete the original design and determine whether or not it can actually achieve the OU behavior I saw in a dream. I'm sure it would be a challenge, but it could also help you hone your skills for future efforts and provide a nice addition to your portfolio.

Below are some links to existing materials, mostly relating to the partial implementation which has already been built and demonstrated. Please do not spend any time on this design. Enough work has already been done on it. I'm including it just to give you a feel for the device I am describing. The complete design is significantly more complex.

YouTube Video of Initial Prototype
http://www.youtube.com/watch?v=PIvZJ9xGutI

Drawings by Jason Owens
http://www.overunity.com/index.php/topic,3871.msg68853.html#msg68853

Overunity.com thread about the device
http://www.overunity.com/index.php?topic=3871.0

3D Animation
http://www.youtube.com/watch?v=lei5_IPtLXU

Construction Details and Discussion Transcript
http://www.mediafire.com/?xmmngndv0mj

If you are interested, please let me know. I'd love to work with you.

0c

FreeEnergy · « **Reply #14 on:** October 18, 2009, 11:15:57 PM »

PLEASE see:
http://www.overunity.com/index.php?topic=8166.0

News:

User Menu

Author Topic: "Free Energy for Dummies" (Read 16355 times)

stonrman401

"Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

stonrman401

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

stonrman401

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

stonrman401

Re: "Free Energy for Dummies"

Cloxxki

Re: "Free Energy for Dummies"

luckylachs

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"

stonrman401

Re: "Free Energy for Dummies"

0c

Re: "Free Energy for Dummies"

FreeEnergy

Re: "Free Energy for Dummies"