Free Energy | searching for free energy and discussing free energy

Solid States Devices => solid state devices => Topic started by: magnetman12003 on March 09, 2015, 10:30:10 PM

Title: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 09, 2015, 10:30:10 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1070313&part=2
Title: Re: OVERUNITY CIRCUIT ??
Post by: Void on March 09, 2015, 10:36:03 PM
Hi magnetman12003. That link appears to require some sort of login to access.
It is not working for me anyway. Appears to be a link to a private email account?
All the best...
Title: Re: OVERUNITY CIRCUIT ??
Post by: FatBird on March 09, 2015, 11:03:40 PM
I'm getting an ERROR Message when I click on your link
                                                                                                            .
Title: Re: OVERUNITY CIRCUIT ??
Post by: deslomeslager on March 09, 2015, 11:23:42 PM
(as it seems) the login is Zimbra and the pass (it is in the url) is 1070313
But: Jetty (the server) then says "account is not active: Zimbra".
Title: Re: OVERUNITY CIRCUIT ??
Post by: FatBird on March 10, 2015, 01:13:02 PM
                                                                                                                                                                .
Title: Re: OVERUNITY CIRCUIT ??
Post by: Jimboot on March 10, 2015, 01:22:18 PM
Seems like he's shared an attachment inside his mail.
Title: Re: OVERUNITY CIRCUIT ??
Post by: MarkE on March 10, 2015, 02:11:49 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1070313&part=2
Linking images in your Comcast email would be a bad idea if it worked.  You keep doing this and it doesn't work.  Why not post the picture here or on a free file sharing service?
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 10, 2015, 02:44:59 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view
https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1070313&part=2
Title: Re: OVERUNITY CIRCUIT ??
Post by: FatBird on March 10, 2015, 02:54:20 PM
We are STILL GETTING an ERROR message.
                                                                                                                       .
Title: Re: OVERUNITY CIRCUIT ??
Post by: MarkE on March 10, 2015, 03:25:03 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view
https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1070313&part=2
Dude, you are linking a web-mail login.  Even if you could provide the right information you would not want the world able to log into a mail account of yours.  Do you really want Terry Wrist and his friend Al Kyder having access to a free mail drop attached to you?  Just post the picture here, or if it is too large to a photo sharing site.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 10, 2015, 04:03:22 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

 STEP BY STEP how do you post a SCHEMATIC photo directly to this forum PAGE from a Picasa photo album?  I tried all I know with out results.
Title: Re: OVERUNITY CIRCUIT ??
Post by: MarkE on March 10, 2015, 04:15:15 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Click the diagram for a larger view
C:\Users\Owner\Pictures\2015-03-09\Scan.BMP
Seriously?  A link to a location on your computer's C: drive?  BMPs are one of the few formats that you can't post here because they are very inefficient.  You can zip the .bmp file and post it.  Most scanners have the option to produce jpg or pdf files either of which you can post here.
Title: Re: OVERUNITY CIRCUIT ??
Post by: gyulasun on March 10, 2015, 05:08:43 PM

 STEP BY STEP how do you post a SCHEMATIC photo directly to this forum PAGE from a Picasa photo album?  I tried all I know with out results.

Hi Magnetman,

When you answer a post on this forum by clicking the Reply icon, you can see under the opening textbox area this:

Attach: 
 Browsing 

So click on the Browsing and the opening window gives access to the Directory tree on your own computer so look for your picture file and click on it, this will embed the picture file into your post when you click on the Post icon. 
So you write the text in the textbox as you usually did here so far and if you want to attach a picture to your post, then click on the Browsing icon under the textbox as I wrote above. If you want a second or third file to attach, then there is a clickable text under the Browsing icon: ( more attachments ) and repeat the process.

However, this forum does not accept picture files with  .bmp  extensions  so please first use the Windows built-in picture editor, Paint (or any other picture editor) to convert your Scan.bmp file to Scan.jpg or Scan.png  file. 
Make sure that the size of your picture should not have higher than 900 pixels horizontally because in the higher than that case the horizontal width of this page in this thread would become very wide (after you upload the wide picture), making the text reading unconfortable due to the must for doing horisontal scrolling line by line here.
In the Windows Paint program, you can check pixel number in the Resize icon, it shows percentage wise and pixel number wise.

Gyula
Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 10, 2015, 06:51:26 PM
Hilarious.
Title: Re: OVERUNITY CIRCUIT ??
Post by: Void on March 10, 2015, 10:32:27 PM
Hi magnetman12003. How are you making out? Do you need further instructions to upload the picture file?
All the best...

Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 12, 2015, 12:59:32 AM
Bump.

Title: Re: OVERUNITY CIRCUIT ??
Post by: Qwert on March 12, 2015, 02:52:43 AM
Hi magnetman12003.
If you still unable to work with your files, ask me or anybody else in this thread and we can do this for you; using PM (Personal Message) for communication.
Title: Re: OVERUNITY CIRCUIT ??
Post by: ramset on March 12, 2015, 07:03:45 AM
Magnetman12003
I would be more than happy to assist.


ChetKremens@Gmail.com
Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 12, 2015, 09:22:54 PM
Obviously another case of government suppression of a working Free Energy device.

Or perhaps he touched the wrong wires and got a fatal shock.

 :'(


Title: Re: OVERUNITY CIRCUIT ??
Post by: mscoffman on March 13, 2015, 03:13:42 PM
Obviously another case of government suppression of a working Free Energy device.

Or perhaps he touched the wrong wires and got a fatal shock.

 :'(


--->   Thundersnow  --->   ???
Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 14, 2015, 10:00:01 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



(removed a bad link)


Well, I for one would love to see this diagram that Senior Member Magnetman12003 has tried unsuccessfully several times to post. I can think of a few reasons why he hasn't kept trying, using some method that works, or why he hasn't contacted any forum members by PM for help doing it. Perhaps some of then are even more likely than "government suppression" or shocking himself to death.

Of course I myself have many circuits that could charge a capacitor up so that it could provide a lethal level of voltage/current, using magnet spin or mechanical action.

But I'm always interested in circuits that do this:
Quote
a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin

All of my circuits simply store up small chunks of electrical energy over relatively long time periods, that then can be released all at once in a shorter time period. They don't actually _produce_ a lot of electrical energy that wasn't there in the first place.

I'm just trying to be reasonable here. I'd happily build and test such a circuit myself and issue complete reports on my findings, as I've done in the past for other circuits for which similar claims have been made. But I really need to see a complete schematic and description of the operation, along with the measurements that led the claimant to make the claims in the first place, in order to begin work.  It really isn't that hard to post such diagrams and data here... is it? So there must be some other reason besides mere difficulty in posting going on.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 14, 2015, 11:34:42 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



I hope this jpeg schematic works.

https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1071005&part=2

I see that it still does not work and I posted a JPEG which still did not show up.   I am not making any claims for the circuit but I will tell you that it delivers over 300 volts and enough amps to continuously light up a 7 wall led 220 volt lamp. 
Title: Re: OVERUNITY CIRCUIT ??
Post by: Pirate88179 on March 14, 2015, 11:42:48 PM
No, the link does not work.

Bill
Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 15, 2015, 12:06:26 AM

Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



I hope this jpeg schematic works.

https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1071005&part=2 (https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1071005&part=2)

THE LINK DOES NOT WORK, BECAUSE IT IS A LINK TO YOUR EMAIL. IT MAY WORK FOR YOU BECAUSE YOU HAVE THE RIGHT COOKIE AND THE EMAIL PROVIDER RECOGNIZES YOUR COMPUTER'S IP ADDRESS AND THE COOKIE.  IT WILL NOT WORK FOR ANYONE ELSE, AS YOU HAVE BEEN TOLD ALREADY.

YOU HAVE BEEN TOLD SEVERAL TIMES HOW TO POST AN IMAGE DIRECTLY ON THE THREAD. SEVERAL PEOPLE HAVE ALSO OFFERED TO HELP YOU POST THE IMAGE. IT IS NOT HARD TO DO. SINCE YOU ARE NOT DOING IT PROPERLY IN SPITE OF ALL THIS INFORMATION AND OFFERS TO HELP .... WHAT IS THE APPROPRIATE CONCLUSION TO BE DRAWN?
Title: Re: OVERUNITY CIRCUIT ??
Post by: MarkE on March 15, 2015, 12:14:36 AM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



I hope this jpeg schematic works.

https://web.mail.comcast.net/service/home/~/?auth=co&loc=en_US&id=1071005&part=2
I've got tonight's winning lottery numbers available in advance:  https://web.mail.comcast.net/service/home/~/?auth=bitemyabacha=enUS&id=1071108&part=4.  Hurry up and use them to buy your ticket before the drawing.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 19, 2015, 07:56:23 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 19, 2015, 07:59:24 PM
Hi All,

Here is a circuit I put together that allows a small electrical force to transform into a large electrical force.

The transistor and coil take 24 volts and low amps to operate.  When that happens a 2 inch diametric ring magnet with huge flux lines starts spinning over the coil.

The flux lines cut through the coil and generate hi frequency, hi power voltage and current.

That is sent to a full wave rectifier circuit that turns it into DC voltage and enough current that could kill you. A capacitor stores the charge.

The NEGATIVE terminal is common to both input and output.

So a little bit of electrical energy produces a lot of electrical energy using mechanical action or magnet spin.

Double click the diagram for a larger view.



Title: Re: OVERUNITY CIRCUIT ??
Post by: Void on March 19, 2015, 09:17:49 PM
Hi magnetman12003. Ok, you got it now. Your scanned in drawing is viewable now
as an attachment to your post. Good going.  :)
All the best...
Title: Re: OVERUNITY CIRCUIT ??
Post by: Groundloop on March 20, 2015, 05:51:43 AM
Hi Magnetman,

I did a copy of your circuit drawing by using Windows Paint.
Is the attached drawing correct?

Also, can you post a picture of your L1/L2 coil?
Did you use any core material in your L1/L2 coil?

EDIT: Corrected the drawing to show a B7A neon bulb.

GL.
Title: Re: OVERUNITY CIRCUIT ??
Post by: Void on March 20, 2015, 10:17:53 AM
@magnetman12003:
I believe you are using twisted pair cross connect (bell wire) for L1 and L2, but you say have
them wound as inner and outer windings? I don't get how the two wires  for L1 and L2 can be a twisted pair,
but be wound as separate inner and outer windings? Can you clarify?
What are you using for a load to test with?
When your load is connected, what is the input current draw from the 24VDC power supply?

All the best...

Title: Re: OVERUNITY CIRCUIT ??
Post by: Enjoykin on March 20, 2015, 11:55:33 AM
Hello Magnetman  :D

Tell me winding configuration for L1,L2, L3 coils.  Does L1 - L2 are bucking coils - one CW direction - other CCW or vice versa ?? What about winding direction of L3 ?? Will be nice if you show photo of your coils.

Look at picture. I think you have used 2nd magnet configuration. Any more info ??

Ok to be honest i want to know did you made SCALAR-MAGNETIC FILELD using famous Dr.Genady Nikolaev Siberian Colia configuration ??

To explain:

I suppose center rotation of magnet is between L1 and L2 and perpendiculary to L1,L2 . Suppose magnet configuration is like on 3rd picture. This means your coils should have reverse poles with respect to magnet poles.  In this case you will get perfect Siberian Colia Scalar Magnetic Filed generator with maximum at magnet axis which is his center of rotation. H+,H- (vector fileds) will be cancelled and powerful scalar filed will be generated and with easy spin your magnet. What is interesting magnet will continuously accelerate himself untill crash or fly away.


Reg.
Enjoykin !!
   
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 05:43:26 AM
Hi Magnetman,

I did a copy of your circuit drawing by using Windows Paint.
Is the attached drawing correct?

Also, can you post a picture of your L1/L2 coil?
Did you use any core material in your L1/L2 coil?

EDIT: Corrected the drawing to show a B7A neon bulb.
Hi,  I Love your drawing! Thanks for posting.  Its correct except the coil is a stock spool with factory twisted wires on it.
Its called cross connect wire and comes in a 1,000 foot spool ready to use.  All that's needed is to remove enough wire until what's left on the spool measures 19 ohms through each of the two twisted wires on the spool.  You must buy a spool with 2 twisted wires on it.  Some spools are larger so look for a spool on Ebay that measures 6 inches in diameter and about  2 1/4 thick. That's standard.

You might have to re spool the factory twisted wire to get to the inside ends.  Don't wind L1 on top of L2
L1 and L2 are already twist wound on the factory spool for you.  Its  very simple doing.  AIR CORE NO IRON
The diametric magnet is a ring magnet and rotates above the twisted L1/L2 wire spool coil .  The smaller ring magnets spin a lot faster but I have excellent luck using a rater expensive 2 inch diametric ring which has tremendous flux lines.

I hope this info clears things up.

Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 05:59:41 AM
Hello Magnetman  :D

Tell me winding configuration for L1,L2, L3 coils.  Does L1 - L2 are bucking coils - one CW direction - other CCW or vice versa ?? What about winding direction of L3 ?? Will be nice if you show photo of your coils.

Look at picture. I think you have used 2nd magnet configuration. Any more info ??

Ok to be honest i want to know did you made SCALAR-MAGNETIC FILELD using famous Dr.Genady Nikolaev Siberian Colia configuration ??

To explain:

I suppose center rotation of magnet is between L1 and L2 and perpendiculary to L1,L2 . Suppose magnet configuration is like on 3rd picture. This means your coils should have reverse poles with respect to magnet poles.  In this case you will get perfect Siberian Colia Scalar Magnetic Filed generator with maximum at magnet axis which is his center of rotation. H+,H- (vector fileds) will be cancelled and powerful scalar filed will be generated and with easy spin your magnet. What is interesting magnet will continuously accelerate himself untill crash or fly away.


Reg.
Enjoykin !!
 Hi,
I already had a 2 inch diametric magnet spin at 6,000 rpms with a couple of  regular skate bearings.
Using the all ceramic skate bearings I could exceed that speed but shut down the setup as I was afraid the magnet would fly apart.
L3 is simply a 80 ohm car relay coil and can be bought for less than two dollars.  Its function is to keep the current down in the Tip 35C transistor.   Its not a part of L1/L2.   Only the 80 ohm coil contacts are used on L3.


Title: Re: OVERUNITY CIRCUIT ??
Post by: Groundloop on March 22, 2015, 08:31:14 AM
Hi Magnetman,

Thank you for posting information about the coils. I have corrected my drawing of your circuit
and attached the new drawing here.

Alex.
Title: Re: OVERUNITY CIRCUIT ??
Post by: yg_34 on March 22, 2015, 11:38:50 AM
As I remember it should be this

https://www.youtube.com/watch?v=nyTxYD_pYic

Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 08:06:37 PM
@magnetman12003:
I believe you are using twisted pair cross connect (bell wire) for L1 and L2, but you say have
them wound as inner and outer windings? I don't get how the two wires  for L1 and L2 can be a twisted pair,
but be wound as separate inner and outer windings? Can you clarify?
What are you using for a load to test with?
When your load is connected, what is the input current draw from the 24VDC power supply?

All the best...

L1 and L2 are already wound twisted together right on the factory spool.  L1 being one wire and L2 the other wire.  A pair with 4 ends and one continuous twisted length winding on the spool. Inner winding is the pair of wires that start first on the spool core.  The outer pair of wires finishes on the outside of the spool. The wires are color coded already with PVC
insulation from the factory.  The input current draw is 1/2 amp.

Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 09:14:51 PM
Hi Magnetman,

Thank you for posting information about the coils. I have corrected my drawing of your circuit
and attached the new drawing here.

Alex.

Hi Alex, 
Can you send me your easy to understand circuit link to me at 65t@comcast.net   I am unable to make a copy of it from the Over unity posting.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 09:20:45 PM
As I remember it should be this

https://www.youtube.com/watch?v=nyTxYD_pYic

You are correct.  That's what the coil looks like and I have the magnet spinning over the coil.
You don't need a circuit switch.   Flip the magnet with your finger and the circuit is powered automatically.  Stop the magnet by taking it away from the coil and the circuit stops.
Title: Re: OVERUNITY CIRCUIT ??
Post by: Void on March 22, 2015, 09:33:19 PM
L1 and L2 are already wound twisted together right on the factory spool.  L1 being one wire and L2 the other wire.  A pair with 4 ends and one continuous twisted length winding on the spool. Inner winding is the pair of wires that start first on the spool core.  The outer pair of wires finishes on the outside of the spool. The wires are color coded already with PVC
insulation from the factory.  The input current draw is 1/2 amp.

Thanks mate.
All the best
Title: Re: OVERUNITY CIRCUIT ??
Post by: TinselKoala on March 22, 2015, 09:57:59 PM
Hi Alex, 
Can you send me your easy to understand circuit link to me at 65t@comcast.net   I am unable to make a copy of it from the Over unity posting.

What happens when you click on the attachment link, below the image? Doesn't your computer give you the option to save the file when you do that?

You can also use any of a number of different programs to make a screenshot capture of anything that is displayed on your computer screen.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on March 22, 2015, 11:45:23 PM
Thanks mate.
All the best

Click the below link to get an idea of how I  harvested the output of the coil and mated it to a radiant
energy antenna system.   ALSO NOTE THE "NOTE' ON PAGE 4 of 10 OF WHAT YOU ARE ABOUT TO READ.
The output neon glows bright all the time  I found charging batteries to be boring   A fellow in South Africa is up scaling the circuit to light up homes. He has replicated the setup already.

http://peswiki.com/index.php/OS:Radiant_Energy_Antenna_System

Title: Re: OVERUNITY CIRCUIT ??
Post by: FatBird on March 23, 2015, 02:56:40 PM
                                                                                                                                               .
Title: Re: OVERUNITY CIRCUIT ??
Post by: RoliK on April 03, 2015, 02:53:45 PM
did anybody test this circuit?
Title: Re: OVERUNITY CIRCUIT ??
Post by: freewinner on April 27, 2015, 08:51:54 PM
Well, I have managed not to double the output power of this system, but to increase the whole system seven times its original circuit.

What I have found was that with a input 0f 24VDC, the output was only between 26 - 28 VDC/VAC.

Not by chance, but by amazing breakthrough and discovery, a outer LED driver used for LED lights connecting to this Magnet wheel system, not only did I manage to burn twenty lights, 220VAC X 12W each in bright and brilliant light, but the magnet wheel break down until it stopped turning.

The amazing thing about is was that all lights loose about 10% of its brightness, but the whole system through the coil was activated by the outer LED driver through the coil keeping all lghts activated and still burn brilliant enough to brightren up at least 10 big rooms of any householding.

The frequencies in the coil did increase very loudly, but not measured yet.

I have managed to connect a 220VAC to 12VDC transformer and connect it to one of the 12VDC supply battery and a 20W solar panel drive in room light to the other 12VDC battery connected in series to give 24VDC to the system.
It ran for 10hours keeping both batteries fully charged and all LED lights by 220VAC X 12W keep on burning bright all the time, without the magnet wheel on the coil.

No heat was measured or feeled/noticed on the system and it ran very cool.

Further research and development needed, but I really think that the Nicola Tesla concept was discovered by chance in this amazing breakthrough that may very soon also change our world into freedom.

This attached & original circuit from Tom Ferko was used, but just increase it seven times from the original with few changes not to mentioned at this stage.

If anybody can help with the development of a real and very good circuit to charge the batteries and control the current and volts at all times between say 25VDC and 23VD, then my breakthrough can change the world in weeks to follow with a system running without a magnet wheel at all.

1. The circuit must handle a input of 100 - 380 VAC and VDC with a output charge to the batteries of at least 24VDC.
2. The very high circuit input volts and current must be smoothed down to at least a 24VDC charger attached directly on the output of the system.

In another discovery it was found that the frequencies created by the system, did not have any affect on any appliances at all with NO NOICE interference at all.

Please take note that I only need the help to build this incredible battery charger.
Any circuit diagrams welcome.

If I can proof the fully working abillities of such system, it will be open sourced to the whole world.


Title: Re: OVERUNITY CIRCUIT ??
Post by: freewinner on April 27, 2015, 09:39:25 PM
This image shows the circuit, but some changes have been made and no photos taken yet.

Componants used in the circuit.

1. BUF 420A transistors.
2. BTW69-1200 thyristors
3. Cap 450V 680uf
plus all other the same as in the original circuit although no automotive coil, neither any potentiometers (pots) connected on the trigger coil output to the system. .

Only 1 X 4 set rectifier and only two caps used.

Magnet wheel removed and system now running fully without the magnet wheel.

The input power from 24VDC batteries running in safe mode is 0.42 Amps with 17 X 220VAC x 12W LED's connected to the system, while all 17 Leds only draw 0.56 Amps running for 10 hours while the batteries was also charged fully from the system output source and the 20W solar panel charging one battery from room light coming through the door. (Not electricity light). 

I also make the breakthrough to run in in either POWER MODE or SAFE MODE. Another discovery by playing around with the system.

The only backlog is the battery charging system that had to be develop in a successful charging system from the output power.
Title: Re: OVERUNITY CIRCUIT ??
Post by: magnetman12003 on April 30, 2015, 02:01:45 AM
Well, I have managed not to double the output power of this system, but to increase the whole system seven times its original circuit.

What I have found was that with a input 0f 24VDC, the output was only between 26 - 28 VDC/VAC.

Not by chance, but by amazing breakthrough and discovery, a outer LED driver used for LED lights connecting to this Magnet wheel system, not only did I manage to burn twenty lights, 220VAC X 12W each in bright and brilliant light, but the magnet wheel break down until it stopped turning.

The amazing thing about is was that all lights loose about 10% of its brightness, but the whole system through the coil was activated by the outer LED driver through the coil keeping all lghts activated and still burn brilliant enough to brightren up at least 10 big rooms of any householding.

The frequencies in the coil did increase very loudly, but not measured yet.

I have managed to connect a 220VAC to 12VDC transformer and connect it to one of the 12VDC supply battery and a 20W solar panel drive in room light to the other 12VDC battery connected in series to give 24VDC to the system.
It ran for 10hours keeping both batteries fully charged and all LED lights by 220VAC X 12W keep on burning bright all the time, without the magnet wheel on the coil.

No heat was measured or feeled/noticed on the system and it ran very cool.

Further research and development needed, but I really think that the Nicola Tesla concept was discovered by chance in this amazing breakthrough that may very soon also change our world into freedom.

This attached & original circuit from Tom Ferko was used, but just increase it seven times from the original with few changes not to mentioned at this stage.

If anybody can help with the development of a real and very good circuit to charge the batteries and control the current and volts at all times between say 25VDC and 23VD, then my breakthrough can change the world in weeks to follow with a system running without a magnet wheel at all.

1. The circuit must handle a input of 100 - 380 VAC and VDC with a output charge to the batteries of at least 24VDC.
2. The very high circuit input volts and current must be smoothed down to at least a 24VDC charger attached directly on the output of the system.

In another discovery it was found that the frequencies created by the system, did not have any affect on any appliances at all with NO NOICE interference at all.

Please take note that I only need the help to build this incredible battery charger.
Any circuit diagrams welcome.

If I can proof the fully working abillities of such system, it will be open sourced to the whole world.

I have a huge  10,000 mfd 400-450 surge volt cap I can send you if you think it would help.  Contact me if you are in South Africa since I don't know your real name yet.