Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Partnered Output Coils - Free Energy  (Read 3501091 times)

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8595 on: March 11, 2020, 10:37:40 PM »
However it might be tricky to proof, which explains why nobody is actively proposing magnetic field as a source of energy.

https://www.youtube.com/watch?v=5nxKqfkkndw

On the left is few turns (big coil) HV sparking.
On the right is green transformer operating inside magnetic field of HV few turns.
No physical connection between them except magnetic field.

When HV is on, green transformer raise voltage and current.
It is principle of Akula's HV antenna (superposition of fields).
Akula, Ruslan, Oksimoron, Adrijan Dniester, Kapanadze. (all have that HV antenna).

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8596 on: March 11, 2020, 11:14:32 PM »
https://www.youtube.com/watch?v=5nxKqfkkndw

On the left is few turns (big coil) HV sparking.
On the right is green transformer operating inside magnetic field of HV few turns.
No physical connection between them except magnetic field.

When HV is on, green transformer raise voltage and current.
It is principle of Akula's HV antenna (superposition of fields).
Akula, Ruslan, Oksimoron, Adrijan Dniester, Kapanadze. (all have that HV antenna).


Hi WhatIsIt,

Yes, your'e on the right path! The Magnetic Field is actually an Electromagnetic Field, consisting of an Electric and a Magnetic Component at Right Angles to each other, this you already know by the sounds of things.

Recently, I covered this topic on my Forum, I have covered this many times before:

Quote from: Floyd Sweet link=http://www.hyiq.org/Downloads/Nothing%20is%20Something.pdf

THE MOTIONAL E-FIELD

Of all the known fields- electric, magnetic, gravitational and motional E-field the only ones incapable of being shielded are the induced motional E-field and the gravitational field. The nature of the motionally induced electric field is quite unique; in order understand it more fully we must start by parting with a few misleading paradigms.

When magnetic flux is moved perpendicularly across a conductor an electromotive force (E.M.F) is electromagnetically induced "within" the conductor. "Within" is an artefact of the commonly used analogy comparing the flow of electric current within a wire to the flow of water within a pipe. This is a most misleading model theoretically.

The true phenomenon taking place has little been thought of as involving the production of a spatially distributed electric field.


The Magnetic A Vector Potential is however different again. It is an Electric Field, but one with Curl.

This is directly related to this quote from Floyd Sweet:

Quote from: Floyd Sweet link=http://www.hyiq.org/Downloads/Nothing%20is%20Something.pdf

However, when alternating current is surging through a transformer an electric field surrounds it.


It is important we realise, in a Conventional Transformer, we have 2 Changing Magnetic Fields, the Secondary and the Primary, a Symmetrical System. The Secondary need not entirely oppose the Primary, it can be redirected if we are clever enough to realise this! We can define the Magnetic Field as an MMF, so we have 2 MMF's. It is possible to have three MMF's and the third MMF to Counter the Secondary MMF. This means the Third MMF Assists the Primary MMF, an Asymmetrical System.

See how constructive we can be when we loose the Distractors!

Best wishes,
   Chris Sykes

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Partnered Output Coils - Free Energy
« Reply #8597 on: March 11, 2020, 11:51:06 PM »
https://www.youtube.com/watch?v=5nxKqfkkndw

On the left is few turns (big coil) HV sparking.
On the right is green transformer operating inside magnetic field of HV few turns.
No physical connection between them except magnetic field.

When HV is on, green transformer raise voltage and current.
It is principle of Akula's HV antenna (superposition of fields).
Akula, Ruslan, Oksimoron, Adrijan Dniester, Kapanadze. (all have that HV antenna).
Hi Sorry about the rant with Cris it needs to stop.

Hasve a look at the photo the one you posted is on the Dally thread I found it a while back
that circuit only works wih one type of circuit at resonance  (re T1000 posted it) I will try see if i can find it.
Sorry for interuption.
It was used with a TVS driver, it's a bit of a suicide device you have to bang the power on it you cant wind ot up
or both transisters switch on at once and blow up. look on you tube i'm sure you will find a how to vid.


Raymondo
« Last Edit: March 12, 2020, 05:06:56 AM by Raycathode »

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8598 on: March 11, 2020, 11:55:17 PM »
Yes, the third field could be the answer!

"The furnace which feeds itself?".
Interaction of third field.

Third field, definitely, is making system out of symmetry.

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8599 on: March 12, 2020, 12:08:49 AM »
Hi Sorry about the rant with Cris it needs to stop.

Hasve a look at the photo the one you posted is on the Dally thread I found it a while back
that circuit only works wih one type of circuit at resonance  (re T1000 posted it) I will try see if i can find it.
Sorry for interuption.
Raymondo

About the resonance?

Akula in his posts first claims that it has nothing to do with resonance!

-------------
Akula post:
A little elucidation  to ensure that you're not getting at any jungle such as
resonances and excitations
!!
This is all interesting but only for experiments !! I
would say different kinds of games!!
Our first and the basic task is to increase the
current !! I see two ways to make this.
First  is when we take some ready voltage
and convert it through the amplifier.
Second when we forming needed voltage right
in the amplifier.
To the point of matter in Kapanadze device main role play the
second inverter - in fact trans of inverter which was placed in the field built by
amplifier.

-------------

After a while when he saw money in device, his story turns around,
and he is masking everything with old story of magic and resonance.

The presence of third field is somehow important in all of those devices of
Akula, Ruslan and others.

Resonance is powerfull beast, but there are all kind of resonances.
When they say resonance, it can be anything in their systems,
not essentially what we think at first glance.

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8600 on: March 12, 2020, 12:19:48 AM »
Chris is pointing to third field on his own way.

I see nothing wrong with that.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8601 on: March 12, 2020, 12:19:52 AM »
Chris,

Any coil interactions can be simulated in LtSpice unless there is an outside energy source that has not been accounted for.  It all boils down to accurate models so, if you will document the inductance of each of your three coils along with their dc resistance plus, provide the info to allow the computation of all K factors or coupling factors.  This will require 3 K factors to create the proper matrix and this is done on your end in the following manner.

Label your coils as L1, L2, and L3.  Then measure the inductance L1 aid L2 and L1 buck L2.  Likewise do this with the pair L1 and L3 and pair L2 and L3.  From these measurements, the K factors can be calculated.  Label L1-L3 as to which is primary, etc, and be sure to identify which pair includes the load.

Also, is the core gapped?  IOW, is it operating in a linear mode through the peak current excursions.  Non-linear core operation can be modeled but the complexity is much greater.

Also, what is the estimated resistance of your heated lamp load and power supply voltage used.  I already realize you are using an "H" bridge for the switching.

From this info, a reasonably accurate simulation should be possible with waveforms that would agree with your scope shots.

From my bench tests of your device, it is my opinion that the long discharge time in the output current waveform is from stored energy in the leakage inductance but with simulation we would know for sure.

Regards,
Pm


Partzman, I went back and saw your post, it was not there this morning when I posted... Apologies I nearly missed it.

Welcome back to this thread.

When I introduced Partnered Output Coils, I indicated the addition of another Source of Energy, so this is a yes to your Question. We both know M.M.F is directly related to Energy. My Machine has three M.M.F's. Primary, Secondary and Tertiary Coils. The Sign of the M.M.F is important, as indicated in the Image below, POCOne must Oppose POCTwo, POCTwo assists the Primary.

You will note: P + S + T = T.

The two Partnered Output Coils must Oppose each other, buck.

Regarding the Gap, the machines behave differently, the Core can make all the difference! Sometimes a Gap is required, sometimes not. The best explanations I have found for this is the Residual B Field, Raselli1 explained in his videos. You know this already, so this is for other readers.

You with any other engineers know the simple Ohms Law equations: I = V / R, so getting the Voltage up is of importance, but not going stupid so we blow our lab to hell and back! Safety is the number one concern here!

You may disagree, but my work has taught me we have Electromagnetic Induction only partly right, Voltage is the Change in Magnetic Flux, Current is the Opposition of Fluxes, I believe my experiment proves this. We need to extend Electromagnetic Induction some before we can predict these machines.

I am happy to work with you on a simulation if you wish.  You know as well as I do these machines work! For all readers, if the SIM does not Sim, then it is no proof! It just means the Sim does not allow for the required parameters.

You may remember me stating Loose Coupling is required? We both know Energy comes from the Changing Magnetic Field and the Asymmetry of the Actions.

The Sawtooth waveform is significant and others need to aim for and improve on this concept, it is Asymmetrical Regauging, and when achieved correctly can led to much greater Energy Out than In!

Best wishes,
   Chris Sykes

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8602 on: March 12, 2020, 12:28:55 AM »
@All Readers,

I do not wish to argue or debate simple Science. Nor have manly competitions to see who thinks they may know more or less. All this is pointless drivel!

I wish to point out something very plain and very simple:

Quote from: Floyd Sweet link=http://www.hyiq.org/Downloads/Nothing%20is%20Something.pdf

The source of energy is unlimited, the virtual vacuum of space itself structured by a motional electromagnetic field is the powerhouse.



Whats required? Very plain and very Simple!

A Moving Electromagnetic Field!

Lets not over complicate, when there is no need. Lets learn from the most simple fundamental Science concepts and move forward with them. The Conventional Transformer has a Symmetrical M.M.F Exchange, we need not build the Transformer that way, we can build an Asymmetrical Transformer, where the Third M.M.F is simply the Reaction of the Secondary M.M.F which would normally be directed back on the Primary.

@WhatIsIt - We define Magnetic Resonance as 180 Degree Currents, equal and opposite. You can observe this in The Mr Preva Experiment where Current can be Amplified.

Best wishes,
   Chris Sykes



lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8603 on: March 14, 2020, 11:45:10 AM »
We know that we need an input to get an output  !
The problem,at first : the input/output ratio

Second : the demand  ! ≤ or ≥ controle ~ UPS emergency technology

It is not the asymetry the problem,but it is the problem that the asymetry is not fix/stable but dynamic/variable in our force/energy/power using world  !

We have different conditions :

appliances in stand-by
appliances in inertia phase
appliances with no load
appliances with low load
appliances with halve load
appliances with full load
these in seriell and/or parallel use and connection

Some only in use for minutes,other used for hours  !

Some with 10W consume,some up to 1500 W nominal consume with 3000 W and more Winrush !

Behind an off-grid "Smart/autonomous grid" is logic  and circuit controle architecture  ! dynamics


Caution : Earl Koenig " Mirror Image Symetry in coil winding" !

Studying the details right !                 Application and Advantage !

There is no energetic "less"  consume advantage,in this case !
       


EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8604 on: March 14, 2020, 09:59:39 PM »

Caution : Earl Koenig " Mirror Image Symetry in coil winding" !
     

Hi lancaIV - Many examples exist!

I have listed what I think are the best here: http://www.hyiq.org//Reference/

Every few years we have someone rediscover the obvious and they soon disappear. Akula, or Roman Karnaukhov was an example some 8 years ago now.

I have been been contacted by Steho Energy, and offered jobs with several Energy Companies:

I have declined in all instances. Unlike other Gagged Inventors, I choose to be Free!

Best wishes
   Chris

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8605 on: March 14, 2020, 10:22:16 PM »
Do you have information about Roman Karnaukhov?

Is he still alive, or he made mistake as well?

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8606 on: March 14, 2020, 10:57:47 PM »
What is the inventor, after he disclose his invention, to some company?

Additional expense.
They have to pay extra for staging of minor accident.
After the accident, the company is finally the only owner of the secret.

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8607 on: March 14, 2020, 11:07:05 PM »
WhatsIsIt   http://www.hyiq.org//Reference/ page 3


Roman Karnaukhov  ( Roman Akula )

Roman Karnaukhov in English, Russes: Роман Карноухов. Akula has a great deal of work that he has successfully replicated from other Inventors!.His successful replications are all of others work, including Andrey Melnichenko - Ferromagnetic Free Energy Generation, to Tariel Kapanadze Generator!




https://www.magistrala.cz/freeenergy/2017/02/24/free-energy-generator-akula-1-kwatt/ a "real" demonstration,visible, of what ?

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8608 on: March 14, 2020, 11:18:51 PM »
Yes Lanca,

I understand your point.

But,

Is Roman alive?
I mean , after the discovery of century, he never come back to some forum and wrote,
"I made it, I succeed with this company!".

Not a word from him, since?
You have a brain to think. What is wrong with that picture?

The elephant steps in the room, and Roman is gone.

Long live the Steho!

I hope I am wrong, and he is on some beach now!
He also can be easily on graveyard!

What Is It?

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8609 on: March 15, 2020, 06:46:57 AM »

Is Roman alive?

I mean , after the discovery of century, he never come back to some forum and wrote,
"I made it, I succeed with this company!".

Not a word from him, since?


What would "MAKE" an Inventor remove all his videos: https://www.youtube.com/channel/UC2aHNMDJzRW7YDd145_Pa2w/videos

A man that glowed when gloating he could do it to others, with several hundred videos to his Credit. What sort of agreement would make a man go so quiet?

I urge you all, NEVER get involved with Energy Companies! Ever! They will wrap you up so tight in legal agreements that you have to get permission to go to the bathroom when you get up in the morning!

Best wishes,
   Chris