Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Partnered Output Coils - Free Energy  (Read 3501204 times)

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8565 on: March 04, 2020, 09:58:59 PM »
Yeah it's about energy from the vacuum

http://www.borderlands.de/Links/ZPEPaper.pdf

Raycathode, well yes, but to be a little more specific, its about Work in the System.

Asymmetrical Regauging can enable a machine to have an Asymmetrical Work Period. When your input is On, say its a 50% Duty, then one would expect to see a 50% work Period. These machines do not work like that, we can very easily have a 10% Duty, Input On Time, and a 90% Work Period after the Input Period Work Period. Thus giving a 100%, or very close to work period for only a 10% Initially. An Asymmetrical Work Region for the Input you supply to the system.

Getting your Potentials up, alone, is not enough! The System must all for the use, to provide Work with these potentials, Work is M.M.F vs M.M.F, or Ampere Turns vs Ampere Turns. A Potential is required for this to occur however, no Potential, No Work. One can have Potential but the System can do no Work!

There is some work to make this work properly, but I gave an example, one is a very basic machine above, now again below. Thx for the link, I had not seen that before.

Best Wishes,
   Chris Sykes

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8566 on: March 04, 2020, 10:01:12 PM »
Can I see the electrical circuit of this experiment?

Yes, it is posted to many pages on this thread, from this page:  http://overunity.com/15395/partnered-output-coils-free-energy/msg453309/#msg453309 on.

Best wishes,
   Chris Sykes

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8567 on: March 04, 2020, 10:38:10 PM »
Kolbacict To be honest I haven’t bothered going into Tinmans Vacuum cleaner motor thing
A because I don’t have one to hand and for another, ever wondered why that sort of motor draws so much current
and is so speed restricted ?

In saying this to get round the above you will have your work cut out and you would have to start your own thread on how it's done, as the BEMF is fed back into the com, that’s why it gets so hot and draws so much current.   

and it's not Don Smith.

Chears

I always advise against jumping to conclusions that can very easily be proven to be incorrect.

You could easily do a few experiments to learn more, I have after all shown how easy this is and what exactly the simple circuits to use to get you started:

See: http://www.aboveunity.com/thread/non-inductive-experiment/ for some simple experiments to make progress in the right direction.

You will notice, there are many on my forum that have replicated these experiments, all successful but all getting varying results.

Not everyone gets Above unity first time around, this is why some work is required, I cant mathematically predict these machines, they all work a little different. Core, the Wire, small things make a difference.

Everyone does get results, if they stick at it.

Best wishes,
   Chris

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8568 on: March 04, 2020, 10:43:58 PM »
The saw tooth wave form, it's the charge of the dump or boost capacitor has to be charged before it's
it's energy is pulse dumped into the Tesla or Katcher primary winding just like is done in an old tube style TV LOPT fly back. I expect your going to ask me what significance there is in doing just that next.

Unfortunately that is top secret and requires a men in black visit sorry


Hahaha funny, what if I told you I am a MIB?

I think you would be surprised, there is a lot to be learned here, but its not top secret and I am only a Man In Black some days. Depends what I get out of my draw on the day.

Assume nothing, base all posts on fact, speculate only when one asks and specify that speculation - Its really easy, you will be very surprised once you reach the goal, looking back, you will think to yourself, wow what was all the drama about, its so easy...

Part of the answer is in this video: https://www.youtube.com/watch?v=5BeFoz3Ypo4

Best wishes,
   Chris Sykes, you have the link to the data.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8569 on: March 04, 2020, 10:45:26 PM »
I like to work with compareable units specially if in the multi,-pulse range:
to measure ≤ -unity or ≥- unity is sometimes difficult without simple formula - knowledge



1 W- h ~ 3,412141 BTU     1 W-Hz ~ 0,0009478 BTU   h/Hz here : 3600/1

First problem  : 1 Wh DC ~ ? Wh RMS( Root Mean Square) AC ? Hz  ( by fixed relation : 1 Hz = 2 pulsations)



Seconds : 50 Hz ~ 3000 RPM and 60 Hz~ 3600 RPM
                 James Murray III dynamotor : 50 Hz ~ 1500 RPM   TORQUE in Nm  ?

Now entering into PWM with the circuit process " designing",pulse duty cycle period/duration/frequency/......                                                                 embeding into
em/ em or em-pm/em or em-pm/pm repulsion or attraction forces in linear/static or rotative devices
with conventional materials or permalloys ( saturation degree) and capacitive dielectric


The great problem : if h/Hz = 3600/1  ergo  sec/Hz = 1/1
but PWM technology was introduced as power on/off technique and not "all time on"- process ,especially in stepper-motors as drive( printer et cet.)
Power on = formula on power off = formula off ≤ 0 consume ( only  circuit standby consume)

little more complicated : PWM in displacement current circuit and feedback

Reading your post LancaIV, your'e thinking about this correctly. Nice to see!

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8570 on: March 04, 2020, 11:31:40 PM »
Archimedes " heureka" process ~  "Gaussche Gesetz/Gaussian law" x Zeit/time = Ampere law
Ampere law ~ Laplace law ~ Biot-Savart law  specific use : Ampere-turns ( virtual turns ~ RPM in/from a coil)
"correctly" is for me not enough,I know to use these A-Symmetrie ( btw: Nobel-prize awarded ,not in Physics  8) )

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Partnered Output Coils - Free Energy
« Reply #8571 on: March 05, 2020, 12:11:51 AM »

Hahaha funny, what if I told you I am a MIB?

I think you would be surprised, there is a lot to be learned here, but its not top secret and I am only a Man In Black some days. Depends what I get out of my draw on the day.

Assume nothing, base all posts on fact, speculate only when one asks and specify that speculation - Its really easy, you will be very surprised once you reach the goal, looking back, you will think to yourself, wow what was all the drama about, its so easy...


Part of the answer is in this video: https://www.youtube.com/watch?v=5BeFoz3Ypo4

Best wishes,
   Chris Sykes, you have the link to the data.
The basis of Homopolar generator try collecting the voltage and current that’s being generated
its not so easy even is it is 100s of amps the voltage will be far less than a volt.
~It's nothing new it's a Faraday device used for over 50 years for the production of hot water
and the manufacture of steel. I have such a device here I cant leave it un protected as it has a very strong ND magnet and WHO  DOESNT DO EXPERIMENTS ??

So what’s that got to do with your original question??


« Last Edit: March 05, 2020, 02:14:27 AM by Raycathode »

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8572 on: March 05, 2020, 12:31:06 AM »
The basis of Homopolar generator try collecting the voltage and current that’s being generated
its not so easy even is it is 100s of amps the voltage will be far less than a volt.
~It's nothing new it's a Faraday device used for over 50 years for the production of hot water
and the manufacture of steel.

So what’s that got to do with your original question??


I very much enjoy learning things, real world, hard fact, something that can be verified on the bench simply and easily.

Others, they don't, they like to speculate, proof comes from belief, from speculation, belief is what drives and motivates some people.

What I am sharing has nothing to do with your Homopolar Generator, except for for a few basic fundamental Concepts.

Raycathode, I am sorry, I can not do it for you, if you want to stick to your belief's, I am ok with that, but I must be clear, there is nothing I can do to help. I have no wish to change belief. I only want to help those that wish to put their faith in Fact. In hard Experiment.

I have no desire to waste any more time replying to your nonsensical, speculative posts.

Best wishes
   Chris

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Partnered Output Coils - Free Energy
« Reply #8573 on: March 05, 2020, 12:50:31 AM »
Chris Sykes

Those might be your views and actions but they are not mine !
So please don’t grow horns on here and assume every one is you enemy !

By the way admin confirmed you were posting as 'Anti.Semitic' so is this a tread only for feed back for none Jewish posters only is that what the problem is Hmm?

Who ever heard of Spanish Portuguese none catholic,

silly boy grow up and behave like an adult?

Raymondo 

« Last Edit: March 05, 2020, 08:00:07 AM by Raycathode »

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Partnered Output Coils - Free Energy
« Reply #8574 on: March 05, 2020, 03:42:10 AM »
Raycathode, well yes, but to be a little more specific, its about Work in the System.

Asymmetrical Regauging can enable a machine to have an Asymmetrical Work Period. When your input is On, say its a 50% Duty, then one would expect to see a 50% work Period. These machines do not work like that, we can very easily have a 10% Duty, Input On Time, and a 90% Work Period after the Input Period Work Period. Thus giving a 100%, or very close to work period for only a 10% Initially. An Asymmetrical Work Region for the Input you supply to the system.

Getting your Potentials up, alone, is not enough! The System must all for the use, to provide Work with these potentials, Work is M.M.F vs M.M.F, or Ampere Turns vs Ampere Turns. A Potential is required for this to occur however, no Potential, No Work. One can have Potential but the System can do no Work!

There is some work to make this work properly, but I gave an example, one is a very basic machine above, now again below. Thx for the link, I had not seen that before.

Best Wishes,
   Chris Sykes
F.Y.I.
Relating this "so called Reguaging phenom" to the circuit DAMPING FACTOR [under, over and critical] might assist in explaining it from a different prospective. AKA "Ringing" related to dv/dt or di/dt. That way the symetrical or asymetrical aspects of the signal shape or the waveform become irrelevant.
SL

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8575 on: March 05, 2020, 11:22:47 AM »
https://de.wikipedia.org/wiki/Elektrisches_Feld


https://upload.wikimedia.org/wikipedia/commons/thumb/b/bb/Fluorescent_tube_under_electric_line.jpg/220px-Fluorescent_tube_under_electric_line.jpg


https://i.pinimg.com/originals/55/3a/fa/553afa24fb80600792a560450b45c8c7.jpg

wrapping that tube by translucent solar cell ! Effect ?





1 W- h ~ 3,412141 BTU     1 W-Hz ~ 0,0009478 BTU   h/Hz here : 3600/1


https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=2&ND=3&adjacent=true&locale=en_EP&FT=D&date=19900213&CC=US&NR=4900898A&KC=A


Tests of a prototype space heater constructed in accordance with the invention have shown that 11,000 BTU of heat can be generated from approximately 600 watts of power.

( Existing portable space heaters can generally produce approximately 5200 BTU of heat at 1500 watts of power. )
                                                                                                      5200 x 0,293 (BTU in Watt)  = 1500 Watt ( 1523,6 W )


  From pure DC or 50 Hz or 60 Hz or KHz or MHz AC or pulsed DC source ?







https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=19900201&CC=DE&NR=3817730A1&KC=A1

http://translationportal.epo.org/emtp/translate/?ACTION=description-retrieval&COUNTRY=DE&ENGINE=google&FORMAT=docdb&KIND=A1&LOCALE=en_EP&NUMBER=3817730&OPS=ops.epo.org/3.2&SRCLANG=de&TRGLANG=en

                                     Now I have managed to achieve twice the watt with a 1 m long and 35 watt neon tube,


lumen/Watt =  https://translate.google.com/translate?hl=de&sl=de&tl=en&u=https%3A%2F%2Fde.wikipedia.org%2Fwiki%2FLumen_%28Einheit%29


Can be    K  ≈ 683 lm / W
Can be    K  ≈ 125 lm / W.


                                 
                                                   lumen in lx-formula !


https://translate.google.com/translate?hl=de&sl=de&tl=en&u=https%3A%2F%2Fde.wikipedia.org%2Fwiki%2FLux_%28Einheit%29


For the definition of the photometric units it was determined that for radiation of the frequency 540 · 10 12 Hz, which corresponds to yellow-green light with a wavelength of approx. 555 nm, the photometric radiation equivalent is 683 lm / W.The following applies to light of this wavelength: 1 W / m 2 = 683 lx.The eye is much less sensitive towards the edge of the visible spectrum (red, blue).1 W / m 2 corresponds to a significantly smaller numerical value in lux down to zero.




1 W / m 2 =

Emitter to receptor   fixed ?/variable ?     distance ?



A luminous flux of one lumen at a wavelength of 555 nm corresponds to a photon rate of 4.1 · 10 15 photons per second.[3]


ever to calculate with photons per second rate and quantity !?


                                                                               ANSI lumens"


ANSI Lumen" is a colloquial term in connection with the technical specification of projectors (including video projectors. This is not a special lighting unit, but it says that the luminous flux (colloquially "the brightness") of the projector in the lumen unit was determined according to a measurement specification developed by the American National Standards Institute (ANSI) . [11]
To prepare for the measurement, the projector must be set so that a five percent gray-tinted field can be distinguished from a ten percent gray-tinted field against a white background, i.e. two very light shades of gray . The projection surface is then divided into three columns and three rows and the average of[/color] the illuminance  {\ displaystyle E _ {\ mathrm {v}}} (in lux) of all nine fields. This mean multiplied by the projection area  {\ displaystyle A} gives the "ANSI lumens": [12] {\ displaystyle {\ mathit {\ Phi}} _ {\ mathrm {v}} = E _ {\ mathrm {v}} \ cdot A}Most of the manufacturers of projectors refer to the standard-compliant maximum settings, which are rarely optimal in practice. The luminous flux achieved with the optimal setting is sometimes significantly lower.







many possibilities to make formula-use errors and/or measure errors ! Or new discoveries !








                                            Metrik und Definition

https://www.southcott.com.au/media/products_guide/hydraulic_conversion_chart.pdf


Druck/Pressure,Kraft/Force,Arbeit/Work,Leistung/Power

1 hp = 1 PS " um cavalo,un cheval ,deux chevaux = 2CV Citroen( fiscal not physical !) "   

     1 Pferde-Staerke not 1 PL = Pferde-Leistung =
  horse-force not horse-power
           AS FIXED AVERAGE VALUE = 1 average horse-force unit in Watt :
https://www.google.com/search?rlz=1C1AVFC_enPT797PT797&q=1+ps+in+watt&sa=X&ved=2ahUKEwiAjJurnIPoAhWmy4UKHf_yC58Q1QIoBXoECBcQBg&biw=1366&bih=604


https://www.engineair.com.au/services
Considering that a HP is the equivalent power of a mature horse and that statistics shown that a horse of 600 Kg is capable to reach speed of up to 88 Km h, this clearly shows that current vehicles with engines around 300 HP are just a waste of precious resources.


https://www.physicsforums.com/threads/psi-to-kw-conversion.700882/

sliding friction versus rolling friction and psi ( pressure )

https://contest.techbriefs.com/2012/entries/machinery-and-equipment/2491


Below that pressure, friction caused the engine to stop running. A scroll compressor of the same size required 8 psi to keep it running. The MECH expander required only 1 psi to keep it running.



the right side : lifter
https://books.google.pt/books?id=Zs8DAAAAMBAJ&pg=PA20&lpg=PA20&dq=popularmechanics+foldable+portable+building&source=bl&ots=IJEARu16YQ&sig=ACfU3U1ZNOlPQTF-jbUR17J3YvUpWsVjyQ&hl=de&sa=X&ved=2ahUKEwiZvqGhp4PoAhXoxoUKHcjbAKEQ6AEwAHoECAcQAQ#v=onepage&q=popularmechanics%20foldable%20portable%20building&f=false

                  by as little as 1 psi


minute 3:00 +
magnet in brasss tube
https://www.youtube.com/watch?v=HK3JOlY0V8Y


magnetic brake principle/ velocity minimizer




lifting a rotor : https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=26&ND=3&adjacent=true&locale=en_EP&FT=D&date=19860619&CC=DE&NR=3602039A1&KC=A1[/size]


                     https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=12&ND=3&adjacent=true&locale=en_EP&FT=D&date=20031204&CC=US&NR=2003222512A1&KC=A1[/size]


http://translationportal.epo.org/emtp/translate/?ACTION=description-retrieval&COUNTRY=DE&ENGINE=google&FORMAT=docdb&KIND=A1&LOCALE=en_EP&NUMBER=3826970&OPS=ops.epo.org/3.2&SRCLANG=de&TRGLANG=en


The current requirement, whether for one attraction pulse or for many, remains constant, even if the number of attraction pulses is up to several thousand per minute, because the attraction pulses occur in sequence, in fractions of a second. So there are never several attractions at the same time.
 The power generator therefore only ever has to supply the power for one electro magnet.
« Last Edit: March 05, 2020, 02:12:38 PM by lancaIV »

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Partnered Output Coils - Free Energy
« Reply #8576 on: March 05, 2020, 02:23:34 PM »
Are experiments permitted in this thread or are they only done [receive help] at Above unity forum ?
if experiments are allowed here
Chris Quote
Raycathode, well yes, but to be a little more specific, its about Work in the System.

Asymmetrical Regauging can enable a machine to have an Asymmetrical Work Period. When your input is On, say its a 50% Duty, then one would expect to see a 50% work Period. These machines do not work like that, we can very easily have a 10% Duty, Input On Time, and a 90% Work Period after the Input Period Work Period. Thus giving a 100%, or very close to work period for only a 10% Initially. An Asymmetrical Work Region for the Input you supply to the system.

Getting your Potentials up, alone, is not enough! The System must all for the use, to provide Work with these potentials, Work is M.M.F vs M.M.F, or Ampere Turns vs Ampere Turns. A Potential is required for this to occur however, no Potential, No Work. One can have Potential but the System can do no Work!
end quote
we can invite experiments here to explore above example ??


lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8577 on: March 05, 2020, 07:27:51 PM »
James F Murray III WO2014021913 , CONVERGENT POWER INC

Multi-Pole Switched Reluctance DC Motor .......

E.M.F.  and B.E.M.F. related :         [ 0201 ]

The TIME ( in frequency,pulses ) GENERATOR becomes the function-controler of all electric and static devices  !



https://worldwide.espacenet.com/publicationDetails/description?CC=WO&NR=2014021913A1&KC=A1&FT=D&ND=3&date=20140206&DB=EPODOC&locale=en_EP


[0081] At the instant illustrated, the DC motor has not yet begun to rotate, and there is no Back EMF, but the starting torque is relatively large at 637.986 in-lbs, which is 5.165 times the running torque. The Back EMF that develops as a function of the motor's increasing rotational speed reduces the start-up current of 135.965 amps down to the full load ampere (FLA) value of 26.326 amps. This "high start-up current," behavior is standard and expected in conventional Speed Voltage dependent motors.



[0201] The difference of these two values AL is calculated to be 8.666 x 10 <"4>H, and when this change occurs in one quarter of a rotation at 60 HZ, a measured Back EMF of 2.5 Volts results. This is a remarkable result, considering the fact that a change of the same degree within the air gap of a conventional Speed Voltage based motor generates hundreds of volts.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8578 on: March 05, 2020, 11:55:50 PM »
Are experiments permitted in this thread or are they only done [receive help] at Above unity forum ?
if experiments are allowed here
Chris Quote
Raycathode, well yes, but to be a little more specific, its about Work in the System.

Asymmetrical Regauging can enable a machine to have an Asymmetrical Work Period. When your input is On, say its a 50% Duty, then one would expect to see a 50% work Period. These machines do not work like that, we can very easily have a 10% Duty, Input On Time, and a 90% Work Period after the Input Period Work Period. Thus giving a 100%, or very close to work period for only a 10% Initially. An Asymmetrical Work Region for the Input you supply to the system.

Getting your Potentials up, alone, is not enough! The System must all for the use, to provide Work with these potentials, Work is M.M.F vs M.M.F, or Ampere Turns vs Ampere Turns. A Potential is required for this to occur however, no Potential, No Work. One can have Potential but the System can do no Work!
end quote
we can invite experiments here to explore above example ??


Hello Ramset,

Although I have had my share of trouble with you, you got me banned for no reason at all, last time, I am willing to forgive you, why? Because I am Human. It was part of my plan. As you know! As this is part of my plan! What I am doing now! You allready know, I have my own Forum: www.aboveunity.com which is very successful!

Ramset, you will notice, and have noticed before, my first post:

This thread is for those interested in moving ahead with Free Energy!

Experiments and serious discussion only!

...


Yes, I am serious, I do not have time to waste, I am only wanting to make progress, share facts and experiments. This is the only way to move forward.

I have said here on this thread, Electromagnetic Induction as we understand it, is NOT Complete, there is more to learn, but Science had stopped back in the 60's and considered Electromagnetic Induction complete and satisfactorily explored. The Dogma of the mind is not Scientific and we can not lay blame on Science for this, it was directly the establishment that is responsible and not Science.

Today, it takes Men with determination, perhaps a little bit of luck, and some very serious discipline to make steps in the right direction. Many men fail, simply because they do not discipline themselves.

Ramset, can you discipline yourself this time around?

Let it be known, if the men named:

Picowatt
MileHigh
MarkE
TinselKoala
PIH123
Idegen
one or two others...



These men, yes I have their full identities, were deliberately here to derail what I was doing! I knew I would have trouble with a few people. But this was on going targeted Attacks:



The following figures are just on the first page of the User Profile as of Today:


MarkE : 2 in 15 posts are not on this thread! 86.6% Vomiting Diarrhea here, on this Thread!!! See Here
MileHigh: 3 in 15 posts are not on this thread! 80% Vomiting Diarrhea here, on this Thread!!! See Here

Do you, the reader see a pattern here?


Is this called a Targeted Dis-Informational Attack?
...


Come and cause trouble, like last time, I will report to Stefan, and I will leave this place! I have no intention to waste years of my time sharing information with others when this much trouble was deliberately established by these men! I have much better things to do, better places to be, with much more productive things to be done.

This is the first and final warning for Behavior problems. I made it clear to Raycathode, and I will no longer be replying to his posts any more unless he gets back on topic and starts being productive.

Ramset, the same for you, I am not putting up with bad behavior, I expect, if you come cause trouble and are asked to leave, I expect you to leave. Not stay here and cause more trouble!

Bring forth your experiments, please feel free. I will help where I can!

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8579 on: March 06, 2020, 03:52:50 PM »
When died Kirchhoff ? What was the electric infrastructure standart in his last educative - as professor/docent- living year ?
DC-EE to pulsed and variable speed AC or DC-EE !
Monophase to polyphase : Kirchhoff - Steinmetz-Kron circut architecture

We are now in the 220 KW/10 Kg power density motor and generator level = 22 W/Gr. rotative machine but also in the 6 Wp/Gr. myriads circuits photovoltaic converter era !

Sintering or sputting or growing :

partnered coils ( nano tubes) of polymeric materials,an- or organic  : as bio-solar converter,A.I.-converter with self-learn potential
cotton fiber plasma treated ( from hydrophyl to hydrophob)  ~ electromagnetic conductor ~ CNT
Kron " Tensors for circuits" + fuzzy logic = neuronal programing

Waymo- Uber-Tesla " autonomous driving" !

From agro-meat to bio-veggie-meat( self organizing and growth ) to bio-mechanics devices,self-growing on demand( sleeper/awaker impulse incorporated by polarisation change)