Darediamond,

If you had studied, and paid attention to my videos, I show, clearly, how the coills can be wound, I show very clearly, 2 configurations in my pdf that you clearly have not read!

I am no HERO, I have not insulted you, merely pointing out that your here for a free ride and not willing to work for what it is you are after:

Like I said to you before you posted here, through private message:


And, still you have not sent me the link to your video. You may be able to tell, I respect those willing to put in the work and think for them selves, working toward an end goal!


It does "agitate" me that someone can ask the questions you have, when I have spent many hours, putting together material, I have already supplied, that has the answers to your questions, already!!!


Do your Homework!!!


Do the experiments!!!


Then ask questions!!!


When you know what it is youre talking about!!!


   Chris Sykes
       hyiq.org

I am not here to ague with you because it doe not wort it but correct you. I know what I am capable of and yes I am a Self-made builder. But does does not mean I can understand easily everything that comes my way in the prime time.
The machine I earlier posted to beforehand clear your view about me was built me. Not everyone on here is brags about his or her achievements.
I built a pulse motor last year to test how spark can be easily quenched using two types of capacitors one and at time on mechanical switch. I have the video on my drive but I have no intrest in Youtubing.
So I do not come onto forum "for a free ride" as you wrongly assumed. Are you all knowing? If no, why are you full of yourself this way?
I had earlier had the impression that you will act this way the very first time I saw your video description on YouTube.

You are not offering anything new Chris. You are only resurfacing the buried Gems. Be humble. Strife at it. We all breath the same Air.
I am presently building a Free Energy pulse Motor which it coils will be disassemble again to test the Old time invention which you only resurfaced and 4 other Ideas using none complex circuits.

As to God, no one else, but as to humans, many duplicates exist remember.
Be humble so that He can directly bestowed on younmore discoveries.
The simple things which I did not understand in your PDF and which I asked simple questions on but which you arrogantly turned me down on have been kndly answered by someone else who as well understands the works of Nikola Tesla to large a extent.

Again as to God, no one else, but as to humans there always superb and better duplicates everywhere. Thus searching is the key.

In looking at the waveforms on the scope. It appears that there is a lot going on that was not discussed or stated in the "transformer". IF you look at the one complete Sine wave and consider it to be 360 degrees and the resting time to be another 180 degrees, we see several interesting things that must be considered. Starting with the load on the output in the Syn. rectifier, and the input going down, you see the voltag leading the current by about 90 degrees both in the input current and the output current normal transformer operation.

 It still is a normal waveform as the sine wave continues upward through 270 degrees. Sometime after 270 degrees, the sync. rectifier is turned off for a very short period of time and then turned back on. ALSO the H bridge is off/open circuit for 180 degrees after the end of the 360 degree cycle so the transformers input coil is floating during the Energy generation portion of the final 180 degree free floating cycle. All the energy (magic) generation occurs in the last 90 degrees of the normal 360 degree cycle and the additional 180 degree "Rest" period.

 Starting at the 270 degree point in the normal waveform, when the load is removed from the transformer and the voltage from the H bridge is approaching zero volts and open circuit, There is a VERY high voltage (+?) pulse in the Primary of the coil reaching 15-1800 volts that is immediately clamped back down (before punching through the input FET's), by the output circuit and then the extra energy generation begins. I "think" there is a HF burst 20-50 VAC, maybe higher, in the RF range, shown as hash on the input resting voltage and the output integrated current waveform. The current REVERSES (clamped by a diode?)back to the input stage and continues most of the time during the resting 180 degree in a positive direction (additional power) in the output stage. This is where the power is generated in the output and where the negative power is added to the input stage. Correctly tuned, that negative return clamped current in the input stage can force the circuit to appear to be operating at +/- zero power. That burst is probably coming from the input core when it is biased properly by the perm. magnet field.(Hence the "Implosion transformer") Is the sync. detector ALSO rectifying the burst pulses, it would have to be considering the waveform?? Or is that just handled by a normal bridge rectifier in parallel with the Sync. Rect. circuit, who knows. I noticed a large multi-wire cable going from the Sync. Rectifier back to the timing board. There was a lot going on in that circuit that the scope hid due to frequency constraints to the probes I think. The output current (extra power) is the integration of that burst by a large amount during the resting period.. Well that's what came to me while I slept last night. This wanders all over the place I hope it is clear enough.

 Ben

When you negate Lenz in a Coil or transformer, to achieve overunity, just increase the magnetic flux and frequency and the Zero Point Energy Field will flow freely into your Coil to multiply your Output.
The use of Bifilar will not give much Magnetic Flux like using serially connected 20 strands and above.
The rate at which you drive the Concentrated Flux will determine the amount of Radiant Energy the Secondary will be able to Pump out for you. Also, the Gauge number of your secondary matters.
Though it can be used that way, Partnered output coils are actually overunity Generator in Disguise so treat them as such by using thin Gauge like 0.31mm wire for your Primary which must be wound with Multifilar wire of that stated gauge. Now drive the Powerful output FLUX of that Primary with HIGH FREQUENCY. Wind your secondaries with Thick gauge like AWG15 or AWG 8 etc. to get concentrated Electrons from the environment and thus keep down the driving current from the power supply.
Note: the amount of Flux your primary is outputting and the gauge of of your secondaries will determine the amount of usable power that will be available in the Primary. Your Core Must be Moulded Core be it industrially manufactured or homemade (recommended). You need High Frelquency, Super Strong Flux from the primary to fully turn bucking output coils into Overunity Generator. Your Core must be Big enough to withstand the Flux your Splitted Pralled Primaries will be Producing.
*Do not limit yourself to 20 strands as I mentioned earlier, you can go as high as 200 strands.
0.31mm coated copper wire is 5grams per 24foot 5inches. So 200 strands of that twisted together will give 1kg which you can even divide into two to make it 400 strands and connect each strand in series to the next one provide you can patiently do so.
Hint: To remove coating of enamel on each leads at a time, briefly subjet them all to burning Gas.
AWG#30 is 32ohms per 100g and 1.5ohms per 5g. Generally, the higher the ohmic value of a coil, the higher the needed voltage to drive to generate it Maximum Flux.
Learn to make Litz wire making machine. You need it. There are 2 versions now which can be made using wood like I did.
To get high magnetic flux high current is not needed so using thinner gauge is better as that will require high voltage which will also aid the flow of z.p.e over the secondaries and reduce input current further.
You can power your bucking coil using AC to avoid back emf of DC. Just make an High Frequency Pure Sine Wave Inverter which Have Moulded Core Center tapped High Voltage Transformer and supply the output of the Transformer from the inverter to your Bucking Coil Overunity TrafoGen Primary and use Diodes to rectify the higher output with High frequency diodes like HER508 and Invert it again to Generate AC and from there, make the set up self charging by converting the AC from the second inverter to DC using an AC to DC converter and link that to your Battery or better High Farad Serially Connected Super Capacitor Bank(The BEST OPTION)
Good luck.