Tinman's FET is connecting the "Bucking Coils, not causing a "dead short" like in the "Piggyback Coil" in the video. Maybe Tinman has a Reed Switch hidden in his Rotary Transformer?

@Synchro1 - A Millitary protocol that is well known: "Deny everything" - Was adopted by the worlds most famous Millitary for a very good reason! Its adopted here for a very good reason also.

Seems Tinman is a Pawn, currently being manipulated by a few well known Dis-Informationalists here in this forum! The truth is out there!

For anyone to deny that Tinman has incorporated "Partnered Output Coils" in his AC Motor is undeniable and only denied by Liar's. I have very clearly shown his Coil Configuration for many years! He has also admitted to "Requiring" the very same Characteristics in his shown configuration:

Im not sure what your reason is,but it is true that not all universal motors will work straight up. Some may require that the coils be rewound on the stator-->as in the case of my larger universal motor.

Like I had said before Tinman even admitted, not all AC Motors will work off the shelf! Some modifications will be required. I have said this for a long time! There is only ONE WAY that Partnered Output Coils can work when they are Paralleled Up as Tinman has shown! If you find the answer to what I have said, the proof will be in the pudding! I have shown that Points A and B prove this!

Right now, as the Dollar signs are fluttering in the Eyes of some, you the people need to start getting off your butt's and start Learning, Building and Sharing!

One statement says it all: Remove the Tinman and its Partnered Output Coils!!!

   Chris Sykes
       hyiq.org

Seems Tinman is a Pawn, currently being manipulated by a few well known Dis-Informationalists here in this forum! The truth is out there!

Groan...  You are a hapless idiot.

I really make it a point to try my best not to use nasty words and insult people but you really and truly are acting like a hapless idiot here.

I am willing to bet that the majority of people following this thread would agree with me.

"And I'm hovering like a fly, waiting for the windshield on the freeway."

 - Genesis

Groan...  You are a hapless idiot.

I really make it a point to try my best not to use nasty words and insult people but you really and truly are acting like a hapless idiot here.

I am willing to bet that the majority of people following this thread would agree with me.

Sooner or later most folks are able to draw reasonable inferences from how a person conducts themself.

J. Edgar where are you when a junkie needs you?

@All - PW (Picowatt) is a government agent - Deny Everything - Remember this!!!

Do not trust this person, he is deliberately misleading you! All of the Goon Squad are!

   Chris Sykes
       hyiq.org

How is it "misleading" to believe Tinman's explanation of his own circuitry over Syncro1's speculation?

Tinman says he shorts one of his coils at a particular time in his generator's cycle. 

I have no reason to believe he does otherwise. 

How is it "misleading" to believe Tinman's explanation of his own circuitry over Syncro1's speculation?

Tinman says he shorts one of his coils at a particular time in his generator's cycle. 

I have no reason to believe he does otherwise.




EDIT: After I posted:

At no time does Tinman electrically parallel his second generator coil with the output as you indicate in your redrawn and simplified schematic.

Why are you and Synchro1 so intent on rewriting Tinman's explanation of the operation of his own circuit?

If you are unable to understand the schematic Tinman graciously provided, perhaps you should just say so and ask questions...

PW - First of all, this is Tinman's Original Circuit - I have posted below, again for your Exceptional Observational Skills!

Shorting Coil B, Dumps the Output Capacitor Voltage through the drawn resistor. First, this would have been very clearly visible on the Scope Shots that Tinman has provided! It is not!

Isnt that interesting woopy. Now what do you think would provide a greater magnetic field?--> a shorted coil with a 50 volt potential across it,or a shorted coil with a 250 volt potential across it?. If you use your scope with a CVR to view current,and the other trace to view voltage,you will see that they are very near in phase,and thus by increasing the voltage across the coil-(even if the current remains the same) the produced magnetic field during that short is far greater than if there was no short. An open coil produces nothing. but a shorted coil at the right time produces a very strong magnetic field. Now all you do is add a second field that apposes that produced field to gain mechanical rotation torque increase. When the torque is increased,then RPM increases when the motor has a load on it,and as the RPM's are increasing,the current draw is decreasing.Also,as the RPM's increase,the generated power output also increases.

Two things to remember woopy.
1-a transistor or mosfet can be switched on two ways.
2- When an inductor becomes open circuit,the current flow remains in the same direction,but the voltage polarity switches.

Correct.

Everyone is looking only at the electrical output of my device,and seem to be ignoring the mechanical output that is also there.
They also dismiss EMJ's shorted coil theory,and although he hasnt shown a working device yet,and he messed up the scope measurements,his theory is sound.

How about you kick in a bit of Common-Sense! "Use your Own Brain" as Tinman said and as I have tried to encourage! I mean, where in History, has OU been seen when Dumping a Capacitor Voltage across a Resistor?


If shorting of Coil B was really whats going on, why on Earth would each Coil A and B be Paralleled Up? AC across a DC Cap? Really, Picowizzard, what's going to happen here? Are you really this stupid? There are so many blatantly obvious problems with this Circuit and the description given! Are you able to comprehend any of them?

Picowizzard, time to pull your socks up old mate.

   Chris Sykes
       hyiq.org