Author Topic: Partnered Output Coils - Free Energy (Read 3532612 times)

synchro1 · « **Reply #420 on:** January 28, 2015, 02:51:47 AM »

@MileHigh,

Take your blindfold off again:

https://www.youtube.com/watch?v=mUJza3l8rmU

Cap-Z-ro · « **Reply #421 on:** January 28, 2015, 02:53:00 AM »

Quote from: MileHigh on January 28, 2015, 02:46:32 AM

...written by the weird-looking guy at the tabletop next to...

Now he's ridiculing Bill Alek's new hair.

Oh, the humanity.

Regards...

MileHigh · « **Reply #422 on:** January 28, 2015, 02:57:11 AM »

That's a classic example of leading yourself down a garden path. It's just a coincidence that the magnets rock at seven point something Hertz. Slightly bigger magnets and the rocking frequency would drop below seven Hertz.

TinselKoala · « **Reply #423 on:** January 28, 2015, 02:57:17 AM »

Quote from: propellanttech on January 28, 2015, 12:29:28 AM

TK

I'll find what I find, and whatever it is, it will be wisdom. That is what I'm looking for.

As for experience....I have plenty, and I'm not going to spell that out for you. It's really not important to this discussion. If I waste my time building the circuit, it is mine to waste. If you want to get into a penile measuring contest about who has the most usable experience......you may find I'm a good competitor.

I simply asked you if you had the requisite experience and knowledge. You don't have much history on this forum, so how are we to know? We've seen "experienced" people with fine apparatus make incredibly basic mistakes before... haven't we. And I'll happily concede that your schlong is bigger than mine, I don't need to see the evidence.

Quote

Will you show me a manufactured transformer with one loop? I didn't say winding. I said loop. Don't confuse what I said, with what you think I said. When you start winding, things get perplexing about loop configuration. Don't go with the book method.....that doesn't work with someone who knows not everything is in a book.

Please explain the difference between a oneturn winding and a loop. Also relate that to the original mention of the loop to which you refer.

Quote

Also, anything made by you doesn't necessarily fit theory, and an antenna is not a transformer. Their purpose is different, you even stated as much with "transmitter/receiver"....so.........

I see, so when people pooh-pooh my system, showing voltage amplification and brighter bulbs, by calling it "just" an aircore transformer, they are wrong? It's a funny kind of system that both is, and isn't, a transformer according to whomever wants to diss me at the moment, isn't it? What about a Tesla coil with a one-turn primary? Is that a transformer, or not? What about a single turn LOOP that acts as an EM pickup/trigger coil for a pulse motor? Transformer or not a transformer? What about air-coupled coils in RF applications, transformers or not?
By the way, _everything_ made by me, and by anyone else I've encountered, does "fit theory"... necessarily.

Quote

Loops in motors are not in a transformer.

The single turn loop in a shaded pole motor is most certainly a shorted secondary of a transformer whose primary is the main motor winding.

Quote

A flyback could possibly use one single loop, but that is a different beast than we are talking about, even then.....it would be rare, but I guess I'll state I may be wrong on that one transformer, which has nothing to do with the current debate.

You are wrong on many different transformers, because you want to redefine things that are clearly transformers as something else.

Quote

I also noticed your coils are not wound orthocyclic .....may I ask why?

Because I am working on the device in EMJ's PDF that he claims produced a COP of 1.7, without providing references. Did you also notice that my waveforms attained with my coil are the same as the ones he obtained, just at higher frequencies due to the lesser inductances of my coils, and that the frequency/inductance scaling is very good? I didn't want to take up too much space but I can show the various inductance measurements of my coils if you insist, and you can do some calculations on your own to verify the scaling is as predicted and "fits theory". You can also confirm, if you like, that the _same results_ would be obtained by using single inductors of the same measured inductances... so there is nothing at all special about the "partnered coil" configuration in these two experiments.

I will expect your coils will be wound orthocyclic, of course. And I also predict that you will get exactly the same results, scaled by frequency/inductance, as EMJ and I did.

Quote

As for EMJ's items, I can't really defend or accuse him of what he did, or didn't do. The point is moot, for he is no longer here.

James

Not moot at all, since he has made claims without evidence, and some of us are still looking for the evidence. If he used improper measurements, bad circuitry with groundloops, mistaken interpretations of data, or such in order to reach his conclusions, it is important for us to understand that. And you can bet your bippy that he is still reading this thread.

synchro1 · « **Reply #424 on:** January 28, 2015, 03:01:11 AM »

Here's the comment from Chris. Pay attention to what he's saying:

@ALL,

About Frequency's, a small experiment:

1: Fuse your input just to be safe first!
2: Slowly drop your running frequency down...
3: Hold in your hand, a small magnet, close to your device.
4: Keep dropping your Frequency until you can Feel the Magnet Jump around.
5: Check all around your device with the Magnet

I found this good to get a feel for what's going on. And, yes easy for the sceptics to go to town here, but it did help me.

Also, on a side Note: Start thinking about the potentials of the Partnered Output Coils! Think about each Coil being a Bucket, How much Water can it hold...

Kind Regards

Chris Sykes - hyiq.org
To Reach New Horizons!

P.S: You should hear a Chattering of your device. Aim for around 25 - 40 Hz to do this experiment.

P.P.S: This Experiment is fairly important, so please don't pass it by! Please Run the Experiment and report your Results!

« Last Edit: January 25, 2015, 02:23:56 AM by EMJunkie »

MileHigh · « **Reply #425 on:** January 28, 2015, 03:01:29 AM »

You haven't heard of Dr. Magnetotron's enhancing and cleansing bioforce energy stimulating vibro-belt? He's next to the guy selling the Schumann resonance books.

TinselKoala · « **Reply #426 on:** January 28, 2015, 03:02:43 AM »

Quote from: synchro1 on January 28, 2015, 02:51:47 AM

@MileHigh,

Take your blindfold off again:

https://www.youtube.com/watch?v=mUJza3l8rmU

In the comments:

Quote

These aren't HD magnets, possibly speaker magnets. Anyway this might be Shumann resonance, but far more likely it is just the mechanical resonance of the system which is based on the strength on the magnetic field and the sizes of the magnets happening to sit at about 7.8 hz.

The proper control experiment, which was of course NOT DONE, would be to use a set of magnets of different size and weight and see if they too "dance" at 7.8 Hz. I predict that they will not.

synchro1 · « **Reply #427 on:** January 28, 2015, 03:03:27 AM »

Quote from: MileHigh on January 28, 2015, 03:01:29 AM

You haven't heard of Dr. Magnetotron's enhancing and cleansing bioforce energy stimulating vibro-belt? He's next to the guy selling the Schumann resonance books.

Jerkoff!

Cap-Z-ro · « **Reply #428 on:** January 28, 2015, 03:05:07 AM »

Quote from: MileHigh on January 28, 2015, 03:01:29 AM

You haven't heard of Dr. Magnetotron's enhancing and cleansing bioforce energy stimulating vibro-belt? He's next to the guy selling the Schumann resonance books.

Dr. Magnetotron = Dr Whodini aka Bill Alek...who now has great hair.

Regards...

synchro1 · « **Reply #429 on:** January 28, 2015, 03:05:09 AM »

Quote from: TinselKoala on January 28, 2015, 03:02:43 AM

In the comments:
The proper control experiment, which was of course NOT DONE, would be to use a set of magnets of different size and weight and see if they too "dance" at 7.8 Hz. I predict that they will not.

Go back and look at post #425.

MileHigh · « **Reply #430 on:** January 28, 2015, 03:05:53 AM »

Quote from: synchro1 on January 28, 2015, 03:03:27 AM

Jerkoff!

That's $80 in the curtained-off tabletop next to the guy selling Dr. Magnetotron's enhancing and cleansing bioforce energy stimulating vibro-belt.

TinselKoala · « **Reply #431 on:** January 28, 2015, 03:08:52 AM »

Quote from: synchro1 on January 28, 2015, 03:01:11 AM

Here's the comment from Chris. Pay attention to what he's saying:

@ALL,

About Frequency's, a small experiment:

1: Fuse your input just to be safe first!
2: Slowly drop your running frequency down...
3: Hold in your hand, a small magnet, close to your device.
4: Keep dropping your Frequency until you can Feel the Magnet Jump around.
5: Check all around your device with the Magnet

I found this good to get a feel for what's going on. And, yes easy for the sceptics to go to town here, but it did help me.

Also, on a side Note: Start thinking about the potentials of the Partnered Output Coils! Think about each Coil being a Bucket, How much Water can it hold...

Kind Regards

Chris Sykes - hyiq.org
To Reach New Horizons!

P.S: You should hear a Chattering of your device. Aim for around 25 - 40 Hz to do this experiment.

P.P.S: This Experiment is fairly important, so please don't pass it by! Please Run the Experiment and report your Results!

« Last Edit: January 25, 2015, 02:23:56 AM by EMJunkie »

This "experiment" seems to have no hypothesis under test. What is the significance of the fact that a coil/core combination creates an external field that can cause another magnet to vibrate? What is the significance of "chattering"?

It's easy to hear and feel audio vibrations in all kinds of devices, from Joule Thiefs to these partnered coils. So what? This represents wasted energy for the most part and can even be destructive, as cores can break and wires can be rubbed bare of insulation. It's a big reason that inductor coils are often potted in epoxy.

TinselKoala · « **Reply #432 on:** January 28, 2015, 03:10:37 AM »

Quote from: synchro1 on January 28, 2015, 03:05:09 AM

Go back and look at post #425.

Which has no relation to anything as far as I can see. Is the idea of resonant pumping of a mechanical system somehow new to you?

MileHigh · « **Reply #433 on:** January 28, 2015, 03:11:51 AM »

If all the people in China jump up and down at 7.8 Hz what happens?

MileHigh · « **Reply #434 on:** January 28, 2015, 03:20:41 AM »

Quote from: MileHigh on January 28, 2015, 03:11:51 AM

If all the people in China jump up and down at 7.8 Hz what happens?

Environmental disaster in Cuba!!!

News:

User Menu

Author Topic: Partnered Output Coils - Free Energy (Read 3532612 times)

synchro1

Re: Partnered Output Coils - Free Energy

Cap-Z-ro

Re: Partnered Output Coils - Free Energy

MileHigh

Re: Partnered Output Coils - Free Energy

TinselKoala

Re: Partnered Output Coils - Free Energy

synchro1

Re: Partnered Output Coils - Free Energy

MileHigh

Re: Partnered Output Coils - Free Energy

TinselKoala

Re: Partnered Output Coils - Free Energy

synchro1

Re: Partnered Output Coils - Free Energy

Cap-Z-ro

Re: Partnered Output Coils - Free Energy

synchro1

Re: Partnered Output Coils - Free Energy

MileHigh

Re: Partnered Output Coils - Free Energy

TinselKoala

Re: Partnered Output Coils - Free Energy

TinselKoala

Re: Partnered Output Coils - Free Energy

MileHigh

Re: Partnered Output Coils - Free Energy

MileHigh

Re: Partnered Output Coils - Free Energy