Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Partnered Output Coils - Free Energy  (Read 3489986 times)

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Partnered Output Coils - Free Energy
« Reply #8805 on: April 13, 2020, 03:32:27 AM »
It will took me more time to explain or compile videos...
Explaining can take us only in more debate.

I will post when I will be certain with results.
For now I told you what I do.
Combining bucking fields with coils and inductors.

I will rerun all the tests again with more care on some details than before.
It will took me some time to do that again.






EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8806 on: April 13, 2020, 04:05:39 AM »
It will took me more time to explain or compile videos...
Explaining can take us only in more debate.

I will post when I will be certain with results.
For now I told you what I do.
Combining bucking fields with coils and inductors.

I will rerun all the tests again with more care on some details than before.
It will took me some time to do that again.



@All Readers:

Some will complain they are not getting results, I will help, but I can only help if they provide information, so I can see where others are going wrong!

Do your study: Videos 1 - 11. Starting here: https://www.youtube.com/watch?v=VUemDvugl4I

Video seven is perhaps the best of the lot, giving you solutions: https://www.youtube.com/watch?v=pKFo4dOW4UU

Your goal should be:

   1: Input Coil initial Frequency and Duty Cycle: 3Khz @ 10% Duty Cycle. Turns: 10 to 25. 1.2 - 2.0mm.
   2: Secondary Coil opposes Primary, Diode specifying Polarity. This Coil is Loaded. Turns: 100 to 200. 0.8 - 1.2mm.
   3: Tertiary Coil Opposes Secondary, Assists the Primary, this Coil is just a Diode for Polarity and a Resistor for sensing Current. Turns:  100 to 200. 0.8 - 1.2mm.


All Coils require a Very Specific Polarity, one we have seen many times throughout history! One I have shown here, Image below.

ALWAYS Monitor your Currents, they tell you whats going on! This is the path to the ultimate Goal!

I am sure Nelson will be willing to help also, that is within his contracts? I have none, so I can give what I want to give you!

I have said before, I am only willing to help those that are willing to help themselves, I am not helping those that will not, that refuse to help themselves! I think those will fail and I will only waste my time with those people!

Current I = Voltage V / Resistance R: I = V / R so increasing your Voltage, don't go silly, 1 - 2 times your input Voltage, will increase your Output.

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8807 on: April 13, 2020, 04:22:57 AM »
https://overunity.com/15395/partnered-output-coils-free-energy/dlattach/attach/175510/image//


the two Fleming/Lenz hand rule  coils from horizontal to vertical position are identical !


                           THERE is by such demonstration no (effective) collision !


                So also not by 1:1 physical design application/replication !


                                             

https://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/World_line-de.svg/1200px-World_line-de.svg.png
                                                          +
https://overunity.com/15395/partnered-output-coils-free-energy/dlattach/attach/175509/image//

                The arrows from the above two -winded - coils : right positionized ?
Asperger-Autism : how much in A.Einstein life was leaded by INTUITION,7.Sin and ENS( 2nd brain) ?

Atti2

  • Newbie
  • *
  • Posts: 16
Re: Partnered Output Coils - Free Energy
« Reply #8808 on: April 13, 2020, 10:26:39 AM »
Quarrel, quarrel, quarrel.

In my opinion, the people who spend their time here in this forum (or elsewhere) are working to make our world a better place. So they don’t just help themselves. This or that way. Everyone in their own way, according to their possibilities! Because views are different, so are opinions.
(Let's not even talk about language difficulties.)

  - The problem starts there, we don't want to listen to the other person.
 - We don't pay attention to what he wants to say! Chris, you didn't pay attention to what I wanted to say to you at the time I was an active member of your forum.
-So if you really want to help people, listen to what they have to say! Especially if several people have a similar opinion. That doesn't mean they're attacking you.
Believe me, everyone is approaching you with good intentions! But if you attack, others will attack.

We let you not understand. That's why you shouted at me several times: TROLL.
Though I actively participated in your forum, I actively did the experiments while others just listened. I also supplemented it with my own experience. True, no one was curious about that.
   But it’s not good not to ask certain questions.
   It is not a good direction not to be able to say a negative opinion. What's true is true.
But from this, one still works to solve the problem.

The numbers don't lie, the man does.

The biggest problem is with people who want to make a profit. There are plenty of examples of this.
And the biggest problem for me was that there was a personal misuse of the data. On your forum!

 I don’t care about the experimental data (it benefited everyone) but personal things are all the more so.

Sincerely, Atti.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8809 on: April 13, 2020, 10:50:52 AM »

I don’t care about the experimental data (it benefited everyone) but personal things are all the more so.



Atti, that was your problem. Experiment is Key and THE most important thing of all!

Most people have a very serious problem: They are not serious enough about the Goal: Energy and putting the required Experiments in to LEARN!

People need to get serious, stop wasting time and get on with it! Get the experiments done, stop complaining, because that's all most people ever do! Complain!

Too many people put a half assed effort into a few experiments, then yell from the roof tops it doesn't work, then they go back and delete the most successful experiments and leave the rubbish behind! You must realise, from my point of view, that's Trolling! On my forum, those that do this put their account at risk! In combination with other problems, these people will be banned!

I expect serious Researchers, willing to do the work! Put the effort in and Learn! If researchers are not willing to do this, then they are not Serious and therefore wasting everyone else's time!

I mean really, One's most successful experiments, why would one delete and then ignore them? A normal person learns the most from the most important experiments! That is unless an agenda is present and the goal is not to learn at all, the goal is to distract and create division. You see, we Human beings have to be very careful, some Human Beings are very easily led into doing wrong, ignoring whats right and just! Doing the wrong thing by others, and not doing the Right Thing as we all should!

If you have good intentions, then I am willing to help, unfortunately Atti, we have had problems as I have alluded, you put me on my back foot! Now if you are willing to make good and share your experiments, then I will help! If you mean well, then show it! Put the work in, don't go deleting it, work on it to improve it! Not every experiment is going to go Above Unity, you have to work at it!

You know, I know many good people out there, but unfortunately I have seen a lot of not good ones! So Prove Me wrong!

It is very hard to trust people when they do the Wrong Things!

All of you, honestly, three Coils, as I have laid out, a Simple Experiment, get the Waveform, work on it, follow the simple guidelines I have given, Improve on the Experiment, then you will have Above Unity! Don't expect it first time around! You have to put the work in!

Best wishes,
   Chris Sykes

Atti2

  • Newbie
  • *
  • Posts: 16
Re: Partnered Output Coils - Free Energy
« Reply #8810 on: April 14, 2020, 09:00:00 AM »


It is very hard to trust people when they do the Wrong Things!



That's exactly what it's about!
My biggest problem is my personal information.

Precisely because of the wrong people, I deleted some data from the forum.
I also deleted the yt channel. I won't say more about it.
 You think the best forum is your forum. Unfortunately, this is not the case.
You can't do that! Your intentions are good!
I may not have had to delete data, but then I was very angry with everyone.
After all, banning has been good for me because I focus on learning rather than reading the opinions of others.

-No, I'm not complaining, I've always asked. If you hadn't noticed!
-I'm not wasting anyone's time. Mostly not my own time. Nowadays, I focus on my own experiments. But I read the comments for a short time after that.
-I don't ignore anything.

Some pictures and a video. Motor current measurement. If applicable, the diode current is greater than the current drawn. In this case, the current drawn from the power supply decreases. There is nothing new in this. Everyone knows. Yet no extra energy. But there is something thoughtful about it.  https://www.youtube.com/watch?v=iHERwndiuH8   

There is a misleading data from your measurement. Pictures.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8811 on: April 14, 2020, 09:03:10 AM »


It is funny how things work out.

No one really know what others experience, until they have to go through the same experience! Tinman was an example here, on this forum, this thread!


So here is where im at with V3 of the rotary transformer. Adding the bucking coil setup did indeed increase the overall output of the system-both mechanical and electrical. When i say bucking coil,i mean a coil that acts as a magnet that can be switched on and off at the right time. As it is a coil that is being shorted,and thus becomes an electromagnet that pushes against the rotors collapsing field just at the right time. This field also travels around the stator core,and boost the field within the secondary(generating)coil that provides the power for the globe.
So we do have a coil that is bucking both against the rotor's field and also the field of the generating coil.

https://www.youtube.com/watch?v=sDFvKJCW9WI
https://www.youtube.com/watch?v=vMXaA0zlb-M
https://www.youtube.com/watch?v=pioohhRyfHk



I urge all readers here, go back and read the history! See what Tinman was exposed to and see how he handled the pressure, because until you experience it, you just don't know!

All serious researchers, if there are any here, should read for the history and the learning of what was going on!

Now, Tinman refuses to post to this forum, I believe he was moderated. He did post for a while over at our, but that forum is pretty much no longer now... Its a shame, I liked Tinman, we had a falling out because I caught him lying to others here...

Best wishes,
   Chris Sykes

Atti2

  • Newbie
  • *
  • Posts: 16
Re: Partnered Output Coils - Free Energy
« Reply #8812 on: April 14, 2020, 09:05:53 AM »
I forgot to say that if the input current on the transformer decreases, there is no extra energy. But I'm working on it.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8813 on: April 14, 2020, 09:10:50 AM »

-No, I'm not complaining, I've always asked. If you hadn't noticed!
-I'm not wasting anyone's time. Mostly not my own time. Nowadays, I focus on my own experiments. But I read the comments for a short time after that.
-I don't ignore anything.

Some pictures and a video. Motor current measurement. If applicable, the diode current is greater than the current drawn. In this case, the current drawn from the power supply decreases. There is nothing new in this. Everyone knows. Yet no extra energy. But there is something thoughtful about it.  https://www.youtube.com/watch?v=iHERwndiuH8   

There is a misleading data from your measurement. Pictures.



Atti, nice to see some experiment!

No Atti, there is nothing misleading from my measurement, its a simple scope shot, you take from it what you will.

Right now, as it stands, how would you go about improving your experiment? What are the things I have said in the past? Lets see if you were paying any attention?

I will give you a clue: I = V / R

You may need a small Gap in your Core, now what else have I said?

Atti, if you learned from the experiment, as I have and many others, right now you would not be complaining about measurements, you would be paying attention to what is going on in your experiment! Damn it man, pay attention to Energy Generation!

Did you do a Bench Mark? Whats your Transformation to Energy Generation ratio?

Good Work and Thank You for Sharing!

Best wishes,
   Chris Sykes

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8814 on: April 14, 2020, 09:36:05 AM »
I forgot to say that if the input current on the transformer decreases, there is no extra energy. But I'm working on it.


Obviously, Conventional Transformers, the Input Does NOT Decrease under Load - Normal behaviour? NO!


There is nothing new in this.



Umm, only because, we, Wistiti, myself, a few others have been showing for years, nearly a decade even! How do we Increase this Decrease? Its a Magnetic Field Effect! Isn't it! So again, Increase V, Increase I and Input will go to Zero or even Negative! Get your Magnetic Fields up, moving better! Improve the Total Magnetic Field Interactions occurring, thus a small gap can help!

This post: here, will help you understand why we may need a small gap sometimes!

Atti, you need to realise some simple things, focus on the fine detail and then you will make advances!

The rest of you, get off your backsides and do the experiments! I will help you! We can work together on this!

My Forum: http://www.aboveunity.com is the best, my Members are Light Years ahead! Why do I come here? For the 25% of you!

Atti, if you keep the work up, and stop complaining, I will restore your Membership to my forum!

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8815 on: April 14, 2020, 09:55:12 AM »
Mr.Sykes, Good Mornng !
A question : "pressure",kinetical and/or electro-mechanical or chemical,which conventional units to apply ?
"POWER FACTOR",positive and negative,lagging and leading ,has which functional effect as applied P or S or Q kind and art of"power" and with which displacement result when cos phi =0  ?

Transformer,dc-dc/ac-ac converter or inverter,under no load condition o with " low up to full looad" ?

Sinus,Cosinus,Tangens and Symmetrie-axis of electrical geometrics : you know about it,or not ?

Sincerely
OCWL

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8816 on: April 14, 2020, 09:59:28 AM »
Mr.Sykes, Good Mornng !
A question : "pressure",kinetical and/or electro-mechanical or chemical,which conventional units to apply ?
"POWER FACTOR",positive and negative,lagging and leading ,has which functional effect as applied P or S or Q kind and art of"power" and with which isplacement result when cos phi =0  ?

Sinus,Cosinus,Tangens and Symmetrie-axis of electrical geometrics : you know about it,or not ?

Sincerely
OCWL


Good Morning lancaIV,

Power Factor is: 1, we see real power! The Output can be very much more than 90% of the Cycle, and its all Real, Hard Core, In Phase, True Power!

Recently, we have seen one experiment that has given me reason to believe this can change and Output Circuitry may be required. I have not see this, not to this degree anyway. All my experiments have seen 1 pf.

We only need a small  < 10% Duty Cycle Input.

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8817 on: April 14, 2020, 10:03:30 AM »
So very the "duty cycle" and make a diagram(m)!
True power/apparent power / fictious power

It is about "power factor cycle" in a net-grid connection as source-load partnership and "power factor cycle" ina semi-/autonomous with source-load partnership !

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Partnered Output Coils - Free Energy
« Reply #8818 on: April 14, 2020, 10:04:50 AM »
So very the "duty cycle" and make a diagram(m)!
True power/apparent power / fictious power

Frequency and Duty Cycle play a role, yes, there is a tuning that can make for better results. Is this what you mean?

Rectifying the Output, measuring DC, of course the Current and Voltage are in Phase, PF  = 1.

Worth reviewing the Videos lancaIV:

So here is where im at with V3 of the rotary transformer. Adding the bucking coil setup did indeed increase the overall output of the system-both mechanical and electrical. When i say bucking coil,i mean a coil that acts as a magnet that can be switched on and off at the right time. As it is a coil that is being shorted,and thus becomes an electromagnet that pushes against the rotors collapsing field just at the right time. This field also travels around the stator core,and boost the field within the secondary(generating)coil that provides the power for the globe.
So we do have a coil that is bucking both against the rotor's field and also the field of the generating coil.

https://www.youtube.com/watch?v=sDFvKJCW9WI
https://www.youtube.com/watch?v=vMXaA0zlb-M
https://www.youtube.com/watch?v=pioohhRyfHk



Do the Study, review the History, go back and read the posts! Nothing factious about it! Note the Fan on vs the Fan off!

Best wishes,
   Chris Sykes

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Partnered Output Coils - Free Energy
« Reply #8819 on: April 14, 2020, 10:12:16 AM »
2 coils as "random operator" and third coil as " random access":
variator function,the third,like the transmission-/automatic hand gear/lever

#8818 : tinmans videos + power factor definition( wikipedia or other literaric sources) + common physics and chemistry background teach knowledge and Professor Phillip Kanarev "Pulse Power measurement" showment
and examples !


Look for the several different parameters in a " duty cycle" and think about the " internal system" in an "UNRUH"  ,the base for the later " quartz watch" ,introduced to market in the 70',last century,red digits !
From analogous the beginning from our " digital era"!