Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Lenz free generator  (Read 570500 times)

i_ron

  • Hero Member
  • *****
  • Posts: 1170
Re: Lenz free generator
« Reply #705 on: October 06, 2016, 04:48:15 PM »

It's actually the E field that induces a current in the secondary,and that current creates the magnetic field around the secondary.

Brad


You are right, I stand corrected.

Ron



gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: Lenz free generator
« Reply #706 on: October 06, 2016, 11:12:18 PM »
In any case it's getting late and I wanted to disclose how to produce Tesla's radiant matter tonight but my post is already excessively long and boring so I will leave that for another time. Just make a post and say hey dingle balls whats up with that radiant matter stuff and I will tell you how to do it.


Best Regards
AC


Hey AC, it's been a while!

So what's up with this Tesla radiant matter stuff?
Could you explain it in a way that a simple experimenter like me could get it :P

Thanks for sharing

Luc

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Lenz free generator
« Reply #707 on: October 07, 2016, 01:26:22 AM »

Hey AC, it's been a while!

So what's up with this Tesla radiant matter stuff?
Could you explain it in a way that a simple experimenter like me could get it :P

Thanks for sharing

Luc



AC, Isn’t this where you precisely arrange three Tachyon Ray Converters at 33.3 degrees to each other, and then fire Binomial Positronic Trans-Dimensional belly button rings at each other at the same time?

Causing a Tear in a Fabric of the Lounge room curtains?

   Chris Sykes
       hyiq.org


lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Lenz free generator
« Reply #708 on: October 07, 2016, 03:20:22 AM »


AC, Isn’t this where you precisely arrange three Tachyon Ray Converters at 33.3 degrees to each other, and then fire Binomial Positronic Trans-Dimensional belly button rings at each other at the same time?

Causing a Tear in a Fabric of the Lounge room curtains?

   Chris Sykes
       hyiq.org


Could you explain it in a way that a simple experimenter like me could get it
                                                           ::)

AC, Isn’t this where you precisely arrange three Tachyon Ray Converters at 33.3 degrees to each other, and then fire Binomial Positronic Trans-Dimensional belly button rings at each other at the same time?


                                                                  ;D
                                    Baby auf den Arm nehmen und wiegen,hehehe
                                                                  8)
                                  Freire gotoluc,dormez vous ? Soleil le matinee,dinge,dange,dong     


         Lost and diving in the Plasmonic sea :-*  selbstverliebt,he the Syky ,I will stay as "normal one"


Tschau and vale-bene
                                  OCWL

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Lenz free generator
« Reply #709 on: October 08, 2016, 02:16:49 AM »




My progress is slow on my replication of Brad's Rotary Transformer.

My research into the RT, shows a lot of inconsistencies. Some data just doesnt fit!

I have to report what Ive found, maybe we can have some comments from Brad if hes ok with correcting me and my research? Correct me where I have gone wrong?

Still at the same place: http://buildoff.hyiq.org/thread/chris-s-build-entry/

Yes, none have entered and none are showing an interest which is pretty typical around here! The loudest are always the quietest when it comes to putting their money where their mouth is!

   Chris Sykes
       hyiq.org

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Lenz free generator
« Reply #710 on: October 08, 2016, 04:17:27 AM »



My progress is slow on my replication of Brad's Rotary Transformer.

My research into the RT, shows a lot of inconsistencies. Some data just doesnt fit!

I have to report what Ive found, maybe we can have some comments from Brad if hes ok with correcting me and my research? Correct me where I have gone wrong?

Still at the same place: http://buildoff.hyiq.org/thread/chris-s-build-entry/

Yes, none have entered and none are showing an interest which is pretty typical around here! The loudest are always the quietest when it comes to putting their money where their mouth is!

   Chris Sykes
       hyiq.org


Good morning,from Portugal view point,03.07 am, Chris Sykes !

Sometimes you have to "shout" more than only 1 time,many times more,that you offer your own idea
resolution website !

I think(I am not stupid ;) ) that with the given link/enderece  http://buildoff.hyiq.org/thread/chris-s-build-entry/ the number of "none" here "....none have entered and none are showing an interest ..."
will become something of the past !

But at today you has the "hyiq.org" page , how many :o  "main" pages you will establish for h(a)ow many ideas/concepts ? Amazon has one page/website-link,but with several 10/100/... sub-pages !


I hope for you that you will get enough "fellowers/followers" and that in future the 24h day will be sufficient long to satisfy yours and the interests of all others which will work with you or led them only informed by your delivered site information,with the freedom to give advice,from where their knowledge they have get !


Good bye and a peacefull and successfull future
                                                                           OCWL
 

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Lenz free generator
« Reply #711 on: October 08, 2016, 05:00:59 AM »

Good morning,from Portugal view point,03.07 am, Chris Sykes !

Sometimes you have to "shout" more than only 1 time,many times more,that you offer your own idea
resolution website !

I think(I am not stupid ;) ) that with the given link/enderece  http://buildoff.hyiq.org/thread/chris-s-build-entry/ the number of "none" here "....none have entered and none are showing an interest ..."
will become something of the past !

But at today you has the "hyiq.org" page , how many :o  "main" pages you will establish for h(a)ow many ideas/concepts ? Amazon has one page/website-link,but with several 10/100/... sub-pages !


I hope for you that you will get enough "fellowers/followers" and that in future the 24h day will be sufficient long to satisfy yours and the interests of all others which will work with you or led them only informed by your delivered site information,with the freedom to give advice,from where their knowledge they have get !


Good bye and a peacefull and successfull future
                                                                           OCWL
 




Good Morning IancaIV.

I do not want any Followers or Fellowers as you termed. I want people to be independant! Be their own leader. Make their own minds up.

Trending patterns in todays world, point toward a very bad future. We must make sufficent effort now to try to curb the worst of whats to come.

Do you know why Jupiter's Moon Io exhibits Volcanic activity? - It is too far from the Sun for the Sun to be the cause!!!

But, why are Global Volcanoes going through the Roof? Scientists tell us we are going through the Sixth Great Extinction: Will Humans Survive the Sixth Great Extinction?

   Chris Sykes
       hyiq.org

tinman

  • Hero Member
  • *****
  • Posts: 5365
Re: Lenz free generator
« Reply #712 on: October 08, 2016, 06:02:22 AM »



My progress is slow on my replication of Brad's Rotary Transformer.

My research into the RT, shows a lot of inconsistencies. Some data just doesnt fit!

I have to report what Ive found, maybe we can have some comments from Brad if hes ok with correcting me and my research? Correct me where I have gone wrong?

Still at the same place: http://buildoff.hyiq.org/thread/chris-s-build-entry/

Yes, none have entered and none are showing an interest which is pretty typical around here! The loudest are always the quietest when it comes to putting their money where their mouth is!

   Chris Sykes
       hyiq.org

I would like to refer to a statement from an email you sent me Chris-hope you dont mind,as it is just a statement.

Hey Brad - Just thought I'd let you know, as prommised, my local Engineering shop, two of them, laughed at me, said that Boring a hole in the Armature would be nearly impossible without destroying the Armature.
So, I am lost, looks like this boring a hole thing is going to be a no goer...


I wonder how many people just give up because the !so called! ex-sperts say it is near impossible  ::) ::)
Lucky for me,i am limited only by my own abilities.
See pic's below Chris-->just done this morning for your entertainment-->11 minutes on an $85.00 dollar drill press,and the correct procedure.
Thank god for engineer shop's-hey ;)


Brad

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Lenz free generator
« Reply #713 on: October 08, 2016, 06:55:49 AM »
I would like to refer to a statement from an email you sent me Chris-hope you dont mind,as it is just a statement.

Hey Brad - Just thought I'd let you know, as prommised, my local Engineering shop, two of them, laughed at me, said that Boring a hole in the Armature would be nearly impossible without destroying the Armature.
So, I am lost, looks like this boring a hole thing is going to be a no goer...


I wonder how many people just give up because the !so called! ex-sperts say it is near impossible  ::) ::)
Lucky for me,i am limited only by my own abilities.
See pic's below Chris-->just done this morning for your entertainment-->11 minutes on an $85.00 dollar drill press,and the correct procedure.
Thank god for engineer shop's-hey ;)


Brad




Hey Brad - Nice work there!

Of course this is an entirely different Armature! Not pressed into the Steel Casing of the Vacuum Motor Casing. Also a lot larger by the looks!

I am most certainly not an expert! I hope you went implying I was? I most certainly do not limit myself to anything other than Facts! None should!

Brad, I did ask questions because the Facts did not add up and Questions remained. I have actually done some experiments on Vacuum Cleaner Motors that I have not released, and yes I did try to get an Armature out of the Steel Housing from where it was pressed in. Needless to say, it did not come out without damage! I had scratches on the Steel Casing and also damaged the Laminations on the Armature. The Armature securing Lugs I did have to punch out, and this did damage the Steel Housing, it was clearly visible where I punched out the Lugs.

The pressed Fit of the Armature was too tight for easy clean removal from the Steel Casing.

The numbers given still don’t add up either. 3 + 3 + 4 x 2 = 20. My Armature is only 15mm across. So I guess my research is still in error. Maybe you were referring to a larger Armature?

Again, Brad I am no expert. Motors are not my strong point! I enjoy researching devices that have potential, and the RT seems as if it has…

Sadly, I am the only one asking questions! None are willing to learn?


   Chris Sykes
       hyiq.org


P.S: My specific requirement to my local Engineering Shop, was Clean No Damage scenario, out and back in.  Looking like its never been out. They were being honest, there would be visible signs of removal.


tinman

  • Hero Member
  • *****
  • Posts: 5365
Re: Lenz free generator
« Reply #714 on: October 08, 2016, 07:14:24 AM »



Hey Brad - Nice work there!

Of course this is an entirely different Armature! Not pressed into the Steel Casing of the Vacuum Motor Casing. Also a lot larger by the looks!

I am most certainly not an expert! I hope you went implying I was? I most certainly do not limit myself to anything other than Facts! None should!

Brad, I did ask questions because the Facts did not add up and Questions remained. I have actually done some experiments on Vacuum Cleaner Motors that I have not released, and yes I did try to get an Armature out of the Steel Housing from where it was pressed in. Needless to say, it did not come out without damage! I had scratches on the Steel Casing and also damaged the Laminations on the Armature. The Armature securing Lugs I did have to punch out, and this did damage the Steel Housing, it was clearly visible where I punched out the Lugs.

The pressed Fit of the Armature was too tight for easy clean removal from the Steel Casing.

The numbers given still don’t add up either. 3 + 3 + 4 x 2 = 20. My Armature is only 15mm across. So I guess my research is still in error. Maybe you were referring to a larger Armature?

Again, Brad I am no expert. Motors are not my strong point! I enjoy researching devices that have potential, and the RT seems as if it has…

Sadly, I am the only one asking questions! None are willing to learn?


   Chris Sykes
       hyiq.org


P.S: My specific requirement to my local Engineering Shop, was Clean No Damage scenario, out and back in.  Looking like its never been out. They were being honest, there would be visible signs of removal.

Chris

Would you like me to show you how to get the armature out of the steel housing within seconds,without a scratch,or without having to even pop the retainer pressings out.

20 seconds-thats all it takes Chris.

As i said,there are ex-spurts,and then there are those that know what there doing,or how to do things.
Brad

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Lenz free generator
« Reply #715 on: October 08, 2016, 07:22:56 AM »
Chris

Would you like me to show you how to get the armature out of the steel housing within seconds,without a scratch,or without having to even pop the retainer pressings out.

20 seconds-thats all it takes Chris.

As i said,there are ex-spurts,and then there are those that know what there doing,or how to do things.
Brad



Hi Brad, its your call what you do, or want to do.

Perhaps you would like to join the Build Off Party and see if we can all make some progress?

Its entirely up to you what you do, but I would like to replicate this with some accuracy and I am sure at least one other person here would also.

Asking questions is only logical when questions arrise, isnt it?

   Chris Sykes
       hyiq.org


tinman

  • Hero Member
  • *****
  • Posts: 5365
Re: Lenz free generator
« Reply #716 on: October 08, 2016, 07:50:44 AM »


Hi Brad, its your call what you do, or want to do.





Asking questions is only logical when questions arrise, isnt it?

   Chris Sykes
       hyiq.org

Well Chris,it's like this.
It seems to me that you are doing your best to point out negatives that just do not exist in your build attempt.
The first one being that to drill the hole through the laminated core would be next to impossible,as per the engineering shops comments.
Second,you say that it is near impossible to get the stator out of the housing without damage of some sort,and you point out that there is no damage what so ever present in or on the housing of my motor.

First i showed you that a hole can be drilled into a laminated core with ease--if you know what your doing. This puts your first !near impossibility! into the !easy as! basket,and shows that it can be done with ease-with any size laminated core.

So now i will have to put the second concern to rest,in that you find it hard to believe that the stator can be removed within 20 second's,without so much as a scratch.

So i'll be back in a while,to post the video,that once again will show you that what you think near impossible,is done with ease.

Quote
Perhaps you would like to join the Build Off Party and see if we can all make some progress?

No,i would not like to join the build off. That is reserved for those that junk my work,but as seen many times now,will never take me on.

Quote
Its entirely up to you what you do, but I would like to replicate this with some accuracy and I am sure at least one other person here would also.

I have shown you that it is quite easy to drill the hole in the laminated core.
I will soon show you how easy it is to get the stator out.

As i clearly stated way back in the thread where the measurements took place,under the guidance of PW and MarkE,there would be no full disclosure of the entire workings of the RT--and that remains to date.


Brad

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Lenz free generator
« Reply #717 on: October 08, 2016, 08:16:09 AM »

tinman

  • Hero Member
  • *****
  • Posts: 5365
Re: Lenz free generator
« Reply #718 on: October 08, 2016, 08:27:15 AM »
Do you know maybe how to to remove generator from the case of portable generator without special tool ? https://www.google.pl/search?biw=1280&bih=877&tbm=isch&sa=1&q=generator+650W&oq=generator+650W&gs_l=img.3...6800.8050.0.8203.5.5.0.0.0.0.147.655.0j5.5.0....0...1c.1.64.img..0.4.525...0j0i19k1j0i30i19k1j0i5i30i19k1j0i8i30i19k1.RjrY5VuhL7E#imgrc=FTMnia6XjGMRTM%3A
There is a flywheel inside  :(


Just in case you know everything  ::)

First-yes,i can completely strip one of those in under 15 minute's-thats my job,and i have many of them here.
Second. There is no flywheel inside,only the rotor and armature. The flywheel is on the opposite side of the motor to that of the generator.


Brad

tinman

  • Hero Member
  • *****
  • Posts: 5365
Re: Lenz free generator
« Reply #719 on: October 08, 2016, 09:00:26 AM »
How to do the !hard! things easy.

https://www.youtube.com/watch?v=u3nWWtmPq6I


Brad