Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Akula0083 30 Watt Self Running Generator.  (Read 1269804 times)

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Akula0083 30 Watt Self Running Generator.
« Reply #780 on: April 22, 2014, 12:15:30 AM »
Wow you guys are super sleuths!  That's part of the fun!

It simply makes sense to put the "nasty and dangerous" AC inputs on the far end of the terminal block setup.  Then you can "play" with the 5-volt output pins in the center.

So I was right in my first assumption.  So you are now officially in Whackadoo Land with Mr. Akua wiring up the DC out to one side of a transformer.  He was just getting cocky and lazy, just like the fact that he couldn't be bothered trying to hide the fact that he broke the seal on the power supply in the first place.

I also see some videos have been made private.  I don't know whose videos they are but that's the classic pattern.  Mr. Chicken Head makes a fake clip or clips, then he stumbles and before you know it his video clips start popping out of existence.

I bet you he hates his mother!  lol

MileHigh

tysb3

  • Full Member
  • ***
  • Posts: 206

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Akula0083 30 Watt Self Running Generator.
« Reply #782 on: April 22, 2014, 01:04:30 AM »
Yep. But consider this.

If the power supply is not altered, and if I am right about the pinout, the DC output could still maybe have an effect on the transformer by biasing the core. So if the input (black wires) to the PSU are getting some kind of low frequency oscillating signal from the Mystery board, this could be.... maybe.... modulating the DC output in some way that then affected the core's permeability and thus the inductance and power transfer characteristics of the other side's windings that are connected to the board.

Or there are batteries and some switching logic in the altered PSU.

But also.... How does that DC power supply respond to having its output short-circuited? Some will just fold back and not produce any output; others will try to maintain constant current by dropping the voltage to near zero; mine in the video will overload and pop the circuit breaker, hopefully before the magic smoke leaks out....

tysb3

  • Full Member
  • ***
  • Posts: 206
Re: Akula0083 30 Watt Self Running Generator.
« Reply #783 on: April 22, 2014, 01:21:26 AM »
@ TK
you talking about old issue. Akula made self runner without PSU.
check latest his video:

 https://cloud.mail.ru/public/1404c889d895/%D0%B8%D1%82%D0%BE%D0%B3%20%D1%84%D0%BE%D0%BD%D0%B0%D1%80%D1%8C%20%E2%84%963.mp4

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Akula0083 30 Watt Self Running Generator.
« Reply #784 on: April 22, 2014, 01:41:59 AM »
Tysb3,

I tried the first video link and did not see a video window and a play button.  I will pass.  The less time I spend on an unknown Russian web site the better.  I am very wary (осторожный) about Russian web sites.

TK,

Who really knows.  I am pretty sure that a switching power supply is just a pulsing inductor charging an output cap (Bedini strikes again) with a voltage sense that feeds back to control how much you pulse the inductor.  So the guts don't lend themselves to any kind of rippling on the output because there is some rippling on the input.  I think.

Notice that a switching power supply is not a "true" power supply that will sink current to keep the output at the desired voltage if the "load" is trying to over-voltage the output.  The voltage sense will just see that the output is already "high enough" and stop switching altogether.

At least that is what I infer because as you know I stopped my true electronics "nerding" before the PCI bus came out.

MileHigh

tysb3

  • Full Member
  • ***
  • Posts: 206

avalon

  • Full Member
  • ***
  • Posts: 160
Re: Akula0083 30 Watt Self Running Generator.
« Reply #786 on: April 22, 2014, 01:56:19 AM »
Why arguing?
Don't you think that if this guy wanted to share anything he would have come out with something by now?

All we are seeing is a stream of mystical pontificating videos at times accompanied by a cheesy soundtrack.
If there is anything real in the videos he's not going to share it. I would imagine that he's afraid of losing his prophet status he clearly enjoys tremendously.

I have studied all his videos and bits of information available and it looks to me that he has recycled a lot of someone else's ideas.
I wish him all the best but would rather not see any more of his 'creations' unless it is clearly beneficial for all.

~A


a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Akula0083 30 Watt Self Running Generator.
« Reply #787 on: April 22, 2014, 01:58:04 AM »
tysb3 I downloaded the video and it is great.Thanks.
Akula shows us how the trafo is wound. It is an old tv flyback core.


Maybe we should offer Akula a free trip to the UK on the understanding that he teaches us.


Any objections or comment to that proposal?


One of us could put him up for free for example.

tysb3

  • Full Member
  • ***
  • Posts: 206
Re: Akula0083 30 Watt Self Running Generator.
« Reply #788 on: April 22, 2014, 02:20:36 AM »
in mine opinion Akula's generator and QEG project heave the same ferrorezonance effect
https://www.youtube.com/watch?v=mLK1VG8h2Wc
ferrites in this effect heave short live. It's need to bounce an iron core like in QEG or maybe with piezo buzzer connected to signal generator and catch ferrorezonance with rezonance coil

broli

  • Hero Member
  • *****
  • Posts: 2245
Re: Akula0083 30 Watt Self Running Generator.
« Reply #789 on: April 22, 2014, 07:58:04 AM »
Isn't it much easier to make a few copies and send them to some reputable people in the community and meanwhile have makers replicate the circuit using a circuit diagram?
No circuit diagram or spec sheet makes me very skeptical. Akula0083 has een around for a while, besides in his home there seems to be no other working replication.

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Akula0083 30 Watt Self Running Generator.
« Reply #790 on: April 22, 2014, 09:17:31 AM »

Hi All,

Grumage started this thread with a fair bit of information, a Schematic, and a rar file with, pdf's, Circuit Design Files, Gerber files, and Images. The first Post


No one has gone into the coils in depth!


Some have claimed Akula's information to be insufficient or even fake. I suggest that anyone that is really keen, that has not already moved on and gone to another project or thread to start looking at the Coils and the 2x diodes after the coils.

Why 2 Diodes?
Why show the Coil orientation as was shown in the schematic?


I believe there is sufficient information here if we all work together on this to solve the riddle. In my posts, I have shown some unusual characteristics in my coils that need further attention! In the following picture, We can see there is something being shown here! Why have one set of terminals soldered? Why have the other set loose? This has only one answer, its so the coil can be wound in the opposite direction if necessary!

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Akula0083 30 Watt Self Running Generator.
« Reply #791 on: April 22, 2014, 09:44:09 AM »
More on the Coil's

The Coil turns are wrong in the schematic!

Primary = 10 turns approx.
Secondary = 16 turns approx.

This Coil arrangement show that its using the A Vector Potential as the weapon of choice. It charges the Ferrite Core with the Primary (10 turns), at this point, I am going to say, because of the Diode arrangement the Secondary (16 Turns) carry's no current. At the Inductive Collapse, the Diodes conduct and the Load becomes an apparent load, more on the Load later. The Secondary Coil at this point is where the Magic is happening! if Wound and Wired correctly, the very Flow of Current in the secondary will do several things.

The Magnetic Field that the Primary Coil produces as a result of Lenz's Law, the Current flowing in the Primary Coil producing a Magnetic Field, will be Bucked by the same effects, Magnetic Field that the Secondary Coil produces as a result of Lenz's Law, the Current flowing in the Secondary Coil producing a Magnetic Field. Super Position states that there must become a Zero Intensity Magnetic Field at this point (See: Field or Wave Super Position).

I have shown this in my Coils previously! The Coils Buck each other.

A VERY Simple Experiment.
1: Take a CRT Tube TV, turn it on and try to get a solid Colour on the screen.
2: Place one small permanent Magnet on the surface of the tube, securely.
3: Push another small Permanent Magnet, Poles Opposing, into the other small Permanent Magnet.

Result:
The Magnetic Field will be squeezed Nearly to Zero - NO MAGNETIC FIELD!!!

I am sure for those of you that have a fair amount of experience will be able to see the significance at this stage of this result!

I will share more information soon, but I would like to see some hands up if anyone is keen to continue.

In the Picture below, you will be able to see that there is a Polar benefit and Bipolar Switching is not the best with these coils. I was hoping someone would have seen this already.

All the best

  Chris

« Last Edit: April 22, 2014, 12:07:46 PM by EMJunkie »

EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Akula0083 30 Watt Self Running Generator.
« Reply #792 on: April 22, 2014, 10:01:23 AM »
The load,

Its not hard to see that the below schematic is going to have issues under certain conditions. E.G: VT1 pulls down the ve- side of L1 to Ground. We can see, and has been pointed out before, the load is Grounding the ve- side of L1 anyway weather VT1 switches or not, This of course means the load will be effectively 'connected' at all times through R5!

This could be a smart move on Akulas part though!

When the Diodes on the ends of the Coils Conduct, this creates a self looping effect on the Coils L1 and L2, Current can flow in a 'Closed' Loop in one direction! This feed back, or feed forward condition, depending on how one looks at it, with Reduced Lenz Law On the Collapsing Magnetic Field on the Coils may be where sufficient energy can be obtained to Charge C11 to capacity and also light the load all at the same time!

So even though the Circuit appears to have issues they just could be a very smart way to deal with operational Characteristics.

All the Best

  Chris

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Akula0083 30 Watt Self Running Generator.
« Reply #793 on: April 22, 2014, 11:04:59 AM »
So even though the Circuit appears to have issues they just could be a very smart way to deal with operational Characteristics.
Why did you change the dot convention on the schematic that you have attached?
Grumage's diagram in the 1st post of this thread and all other diagrams have the opposite winding polarity.

With the winding polarity depicted on the schematic, that you've attached, the current fill flow in the primary and secondary winding simultaneously (that is a characteristic of the "normal" transformer mode).

All other diagrams show the winding polarity in a "flyback mode" where the maxima and zeros of the currents do not occur simultaneously.


EMJunkie

  • Hero Member
  • *****
  • Posts: 3322
Re: Akula0083 30 Watt Self Running Generator.
« Reply #794 on: April 22, 2014, 11:07:25 AM »
Why did you change the dot convention on the schematic that you have attached?

Hey Verpies,

See Grumage's original Rar File. There are 2x diagrams in there. I did not change anything.

All the Best

  Chris