Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Akula0083 30 Watt Self Running Generator.  (Read 1269883 times)

HG8AD

  • Newbie
  • *
  • Posts: 27
Re: Akula0083 30 Watt Self Running Generator.
« Reply #615 on: April 11, 2014, 06:15:41 PM »
Variations in similar schemes !!

Ed morbus

  • Full Member
  • ***
  • Posts: 131

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Akula0083 30 Watt Self Running Generator.
« Reply #617 on: April 12, 2014, 03:18:58 PM »
hi verpies,

I have reverse engineered the pulsed flasher at pin 8 IC Section MC14063.

Please assist to verify and update the previously attached circuit.Thanks.

Please take note i have made a small mistake the trim Pot with 103 marking is actually 10K Ohms instead of 1K Ohms.There are 2 "103" pots in circuit.

The only thing i do not know
1)the tiny capacitor value found on pin3 & pin 4 of MC34063.I assume it's 510pf base on other replicate diagram.
2)There are just 4 wiring to ferrite pot core which i do not know from left side of ferrite pot  is connected to which one on the right side of circuit.
    At this moment i simply assume after diode which is connected to (+)1000uf 10volt from pin1(MC14063) will eventually lead to transistor collector at the other side of circuit.
    This makes the most sense for me.

3)Resistor value between pin 7 & pin 8 can be faintly seen as 2 red which i assume is 220 ohms.The other replicate shown as 180 ohms.

4)Resistor beside 10k ohms pot near 8 pin IC looks like 1.2KOhms brown,red,red,gold.

Only those with "oscilloscope" would able to see if the trigger is happening at which position of waveform."This is important".

5)I did not put the kill push button which is not important as short circuiting the caps would cease oscillation if this device works as "FE" device. :D

6)Latest update -I can't tell if the pin 4 of MC34063 is indeed connected to ground(-).Base on datasheet it's conected to ground.
     Pin 6 (MC34063) is where + 3volt power needs to be applied during testing stage/before self run.

The  CD4069 trigger frequency should follow with the oscillation frequency of MC34063 since i don't know the tiny cap value used.

------

I will have a go at this circuit once i received the ferrite pot and 8 pin ic. ;)
Not forgetting the counter poise beneath ferrite pot which is the large copper track which is also the (-)

I'm sure now the creator of this device would be mad at me. :D :D :D :D :D :'(
------------------------
For those whom just read my recent posting with verpies-

This is the video which i have reverse engineered circuit merely by looking at youtube video.
Less than 1 watt free energy device.

http://www.youtube.com/watch?v=juwm_W5-qAM


http://www.youtube.com/watch?v=gWjs0-WCMzs

4Tesla

  • Hero Member
  • *****
  • Posts: 946
Re: Akula0083 30 Watt Self Running Generator.
« Reply #618 on: April 12, 2014, 11:19:37 PM »
@magpwr

Nice work!   8) You should start a new thread for this project.  I will follow.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Akula0083 30 Watt Self Running Generator.
« Reply #619 on: April 13, 2014, 01:59:41 AM »
I have reverse engineered the pulsed flasher at pin 8 IC Section MC34063.
Please assist to verify and update the previously attached circuit.Thanks.
Is this what you had in mind?

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Akula0083 30 Watt Self Running Generator.
« Reply #620 on: April 13, 2014, 04:58:22 AM »
Is this what you had in mind?

hi verpies,

I have just edited circuit diagram as attached which i didn't spot earlier.

I hold no secrets there are only 2 possibilities related to the connection from the pot core at the left side as side which the copper wire from pot core can be easily swapped on circuit board.
The circuit diagram attached is one of the possibilities.

The other possible way is we just need to swap copper wire as shown in my drawing.
If you take a look at the attached top side photo.It also looks like transistor collector to ferrite pot core then to pin1 before diode base on 2nd possible connection.

I have also attached my edited drawing on where the copper wire needs to be swapped base on 2nd possibilities.

----------------------------
This is just my personnel opinion only base on the attached circuit diagram the value of R3  100 ohm resistor leading to the green led should be replaced with a higher value anywhere around 560 ohms.
Since i don't want to steal too much "signal power" meant for the base of the transistor and maintain a dimly lit green light which merely serve as indicator purpose only.

Some experimenting is required to find out which is a suitable NPN transistor for the job which shouldn't be a big problem at all.

----------------------------
This is the latest update minutes after posting.I have attached mini video to show my existing IC HCF4069UBE blinking happily on Li-ion battery 3.4volts which i am using 330 ohms to led.
The capacitor value for 4069 in your circuit diagram needs to be lowered from 10uf to 4.7uf to get the green led blink rate quite similar to the youtube video.

I'm guessing the resistor to drive transistor may or may not need to be lowered from 100 ohms but not confirmed at this moment since i'm waiting for component MC34063 to arrive. ;)

The current drawn at this testing stage with green led is around <1mA
-------

For everyone else,

This experiment is only suitable for those with oscilloscope to view 2 signals generated by 2 IC else it would be a failure if signal is not in sync.

I don't make promises if this circuit will work as intended since this circuit isn't mine. :D
« Last Edit: April 13, 2014, 10:31:44 AM by magpwr »

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Akula0083 30 Watt Self Running Generator.
« Reply #621 on: April 13, 2014, 11:02:14 AM »
 
@magpwr

Nice work!   8) You should start a new thread for this project.  I will follow.
This divice based on not akula 30 W divice... Author on this divice before several months also try replicate this divice but unsucsesfuly and now he make it with small output.
It based on this schematic and divice http://eurosamodelki.ru/uploads/images/83c140d3ddb49e354c61634b21931c92
http://eurosamodelki.ru/katalog-samodelok/alternativnaja-energetika/generator-energii-na-nelineinoi-induktivnosti
Aouthors is two defferent guys.

Princip can be like that of this divice http://realstrannik.ru/media/kunena/attachments/1766/uzel.jpg Транзисторы закрываються и открываються поочерёдно.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Akula0083 30 Watt Self Running Generator.
« Reply #622 on: April 13, 2014, 11:13:40 AM »
OK, I altered the values of R3 and C4 according to your recommendations.

I kept the connection to R0 (the CSR made out of the wire jumper).  If you look at the circuit diagram on page 5 of this datasheet, you will see that it makes sense.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Akula0083 30 Watt Self Running Generator.
« Reply #623 on: April 13, 2014, 11:14:57 AM »
Here my one schreen shot.

doktorsvet

  • Newbie
  • *
  • Posts: 21
Re: Akula0083 30 Watt Self Running Generator.
« Reply #624 on: April 13, 2014, 12:02:16 PM »
Hello ladies and gentlemen, scheme flashlight vadim guk published on the website zaryad.com
http://zaryad.com/forum/viewtopic.php?f=8&t=8534

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Akula0083 30 Watt Self Running Generator.
« Reply #625 on: April 13, 2014, 12:14:42 PM »
Here my one schreen shot.

hi Menofather,

I am using the  circuit diagram posted by verpies.

I have already tested 4069 led blinking and it's working.I have attached led blinking video once more.I am just waiting for MC34063 and around 4cm ferrite pot to arrive.
Kindly do wait for 3 weeks once parts arrive only then i can report result.

In the meantime i will just wait for any feedback if anyone got all the component available and circuit assembled.
I'm aware this isn't the right thread which i would like to end it with a working device and no further question asked once all the details are provided. :D

I doubt i will go for any other free energy "Led circuit diagram" which is not tested.

My method is reverse engineering via youtube video with no circuit diagram provided by the creator of the working device.



--------------------------------------
In the meantime I have increase the output secondary of Don smith device to around 140volts.
I am waiting for small value capacitors around 10nf to arrive so that i can do fine tweaking at secondary capacitor.

Since my don smith secondary was wired wrongly i merely criss-cross one of the secondary output.

Need to find time to build driver stage for "1200volt IGBT" which i have received then use my 220volts inverter and rectify to around 400volts with around 300uf 400volt cap to switch primary coil.

semenihin-77

  • Full Member
  • ***
  • Posts: 161
Re: Akula0083 30 Watt Self Running Generator.
« Reply #626 on: April 13, 2014, 12:35:04 PM »
К этой схеме Акула не имеет никакого отношения.
В первом видео показан принцип. Частота коллебаний там ниже чем задающий в 34063. Десятки герц против десятков килогерц.
Резонанс ловиться изменением напряжения- резистором.

This scheme Shark irrelevant.
The first video shows the principle. Oscillation frequency are lower than set in 34063. Dozens hertz against tens of kilohertz.
Resonance caught changing the voltage-resistor.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Akula0083 30 Watt Self Running Generator.
« Reply #627 on: April 13, 2014, 02:03:31 PM »
Right draw values?

semenihin-77

  • Full Member
  • ***
  • Posts: 161
Re: Akula0083 30 Watt Self Running Generator.
« Reply #628 on: April 13, 2014, 02:21:18 PM »
не работает на других транзисторах, оригинальный выковырял из компьютерного вентилятора.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Akula0083 30 Watt Self Running Generator.
« Reply #629 on: April 13, 2014, 02:34:13 PM »
не работает на других транзисторах, оригинальный выковырял из компьютерного вентилятора.
"does not work on other transistors, took original one from computer fan"

Do you have it self running..? :)