Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: VORTEX COIL FRAMES/FORMERS FOR SALE ...  (Read 35610 times)

Electronix Hive

  • Newbie
  • *
  • Posts: 18
VORTEX COIL FRAMES/FORMERS FOR SALE ...
« on: February 17, 2014, 09:23:30 PM »
Hey guys i would like to help people acquire vortex coil formers at a fair price so we all can have a piece of this tech and explore ;)
we can ship to most countries and have a range of sizes from small to XXX large, wooden or polycarbonate.

Please use the links below to purchase formers and if you have any questions feel free to add me on skype = electronixhive
or drop me a message on here all the best Eh

Small = www.badwolfeng.co.uk/index.php?route=product%2Fproduct&product_id=77&tracking=52ec32144629e

Medium = www.badwolfeng.co.uk/index.php?route=product%2Fproduct&product_id=78&tracking=52ec32144629e

large = www.badwolfeng.co.uk/index.php?route=product%2Fproduct&product_id=80&tracking=52ec32144629e

X Large = www.badwolfeng.co.uk/index.php?route=product/product&product_id=84&tracking=52ec32144629e

XX Large = www.badwolfeng.co.uk/index.php?route=product/product&product_id=85&tracking=52ec32144629e

XXX Large = www.badwolfeng.co.uk/index.php?route=product/product&product_id=86&tracking=52ec32144629e


Big thanks to admin for allowing me to advertise here (we should all benefit if others have the resources)
« Last Edit: February 18, 2014, 05:25:26 AM by Electronix Hive »

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Vortex coil inout vs output
« Reply #1 on: February 17, 2014, 09:27:37 PM »
I thought i would add a pic of my early results working with the coils
in the pic below i have my large vortex coil hooked up the my signal gen, once resonance was found the resulting output was much higher than in
these cols are 1-1 wound so no stepping up or down should take place but as if by "magic" eerhum :D u can get very hi voltage from very little input with this 1-1 ratio. and not forget the anomalous monopole effect where the coil can be tuned to produce a south pole only and a void on other side.
any questions please feel free to ask....all the best EHIve


Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #2 on: February 17, 2014, 09:33:26 PM »
Here is a nice photo of the vortex coil in all its glory.....

Pirate88179

  • elite_member
  • Hero Member
  • ******
  • Posts: 8366
Re: Vortex coil inout vs output
« Reply #3 on: February 18, 2014, 05:59:03 AM »

once resonance was found the resulting output was much higher than in


So, these forms can be used to make an overunity device then?

Bill

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #4 on: February 18, 2014, 06:31:45 AM »
Hi bill....
hmm i want to say yes and no..it's a hard one man, because people have videos apparently showing overunity using dmm and a scope which is amazing to most people but.....the problem is the instruments are not rated to work with the hi frequencies being used. from my own tests their is defo something special going on with these coils.....if you start looking through youtube u will find videos of people running test
i will say tho i have seen some people getting a hell of a lot of light out of a small input....take care


MarkE

  • Hero Member
  • *****
  • Posts: 6830
Re: Vortex coil inout vs output
« Reply #5 on: February 18, 2014, 06:33:50 AM »
So, these forms can be used to make an overunity device then?

Bill
While there have been a number of people who have said that they have achieved OU from a Rodin or vortex style coil, none have been able to make a self-sustaining circuit using one. 

These kits are a lot lower cost than some others that have been offered for sale.  That makes them more attractive for people who want to mess around with these sorts of things.


MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #6 on: February 18, 2014, 06:37:31 AM »
My advice is to go to Radio Shack and buy a roll of speaker wire.  lol

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #7 on: February 18, 2014, 06:39:08 AM »
I agree....and cheers for the comment
that is my goal atm, to help people on a tight budget afford the former. the original designer should get the phrase for the former but as for the heavy price tag....not good for us that have to pay bills..:i would like everyone to be able to research with these coils not just the ones with deep pockets...
All the best

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #8 on: February 18, 2014, 06:41:38 AM »
mile hi...hey man u could go buy some speaker wire but the problem then will be getting the wire in the geometric shape with tight symmetry, plus they just look cool with the former...:D

Pirate88179

  • elite_member
  • Hero Member
  • ******
  • Posts: 8366
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #9 on: February 18, 2014, 06:59:15 AM »
Hi bill....
hmm i want to say yes and no..it's a hard one man, because people have videos apparently showing overunity using dmm and a scope which is amazing to most people but.....the problem is the instruments are not rated to work with the hi frequencies being used. from my own tests their is defo something special going on with these coils.....if you start looking through youtube u will find videos of people running test
i will say tho i have seen some people getting a hell of a lot of light out of a small input....take care

Thank you for your response.  Those look cool and well made for a decent price.  Nice idea for a product.

Bill

tim123

  • Hero Member
  • *****
  • Posts: 509
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #10 on: February 18, 2014, 10:25:00 AM »
Please use the links below to purchase formers...

Hi Electronix,
  they look like really nicely made products - and a good price. Good luck!

You must have invested some time & cash into the tools for the job... Loads of potential... Cases for single-board-computers (like RPi, Odroid etc) always seem pretty flimsy - maybe there's a market there too...

:)
Regards, Tim

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #11 on: February 19, 2014, 02:18:55 AM »
Electronix Hive:

This is the issue.

You take a "vortex" coil and you measure its inductance.  Let's assume the roll of speaker wire has a higher inductance.  So, with your inductance meter, you start to unroll the speaker wire and make measurements.  So within short order you have two coils of approximately the same inductance.

Now, take your "vortex" coil and your speaker wire coil and try the various tests like lighting LEDs and looking at back spikes or whatever.  Will you observe any significant differences between the two setups?  The answer is no.

Has anyone done this type of test comparing the two different coils?  Chances are the answer is also no.

Is there anything significant about a "vortex" coil?  The answer is no.

MileHigh

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #12 on: February 19, 2014, 07:34:29 PM »
while i accept all comments and welcome them...i do suggest that all  opinions are displayed with evidence weather it be good or bad.
it is so easy for people to slate what they have not tried(if u have please post results in accordance with ur opinion so we can all see where ur going wrong or have it right.
you have to understand i am just selling formers  to help people out in a tight budget
as i have stated so many times, their are many people out their that have great success with this geometric shape...ie NIkola tesla pancake coil. Marco rodin...daniel nunez and the many people that have brought a former and got bk to me..

can u please post some pics of your test or videos , explaining all you are doing .and showing power in vs power out
 
« Last Edit: February 19, 2014, 11:18:14 PM by Electronix Hive »

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #13 on: February 20, 2014, 01:10:01 AM »
Electronix Hive:

I hate to flip things around on you but I have to.  The people that make claims about "vortex" coils are the ones that should be showing how they can allegedly do things that regular coils cannot.  So think about it, have you ever seen any evidence of this?  I am willing to bet that you haven't.

Also, people like Daniel Nunez are just trying to cash in.  Why am I saying this?  Because I have watched about half a dozen of his clips and he barely knows what he is doing.  It takes a trained eye to realize this.  Some of his clips are really really bad in terms of how incompetent he shows himself to be.

So you may not be aware of this yourself.  Do I have clips?  The answer is no, but you are, in all honesty, if you really think about this seriously, you should be asking Marko Rodin and Daniel Nunez to do the clips with the comparisons between regular and "vortex" coils.

For what it's worth, for sure Daniel Nunez couldn't make comparison clips and I am not aware of Marko Rodin ever working on an electronics bench.  I am going to take a leap and assume that Marko has no experience on an electronics bench.

So seriously, if you want to learn about electronics and coils you can make one yourself, buy a roll of speaker wire, or go on DigiKey, and so on.  You don't need a "vortex" coil and the reason I put the term in brackets is that there is no vortex anything associated with the coil.  Nor are there any anomalous monopole effects.

MileHigh

Electronix Hive

  • Newbie
  • *
  • Posts: 18
Re: VORTEX COIL FRAMES/FORMERS FOR SALE ...
« Reply #14 on: February 20, 2014, 01:15:51 AM »
Thanks for ur input.....they vary from good to bad at times but all is constructive
« Last Edit: February 20, 2014, 04:02:29 AM by Electronix Hive »