Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Bashar's Spacecraft Engine  (Read 115918 times)

Uniqorn

  • Newbie
  • *
  • Posts: 28
Re: Bashar's Spacecraft Engine
« Reply #135 on: February 05, 2014, 10:30:55 AM »
...
 
When I do something I always like to do my best, I can’t expect anything else, it’s just the way I am unfortunately.
 
I have faith and lots of patients :)

- nothing unfortunate about that - an admirable quality. :-)

- Just like Mother Teressa!  ;-)

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #136 on: February 07, 2014, 08:54:55 PM »
This is just my practice crystal, but I thought I show you the 1mm hole with the wire in, drilling the hole was very easy, took 4 drill bits though, pushing the wire in was a nightmare, just the slightest kink would stop it, that’s what you call touch & penetrate.
 
I should hopefully drill the proper crystal Monday, not got time before.

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #137 on: February 09, 2014, 02:35:28 PM »
I only managed to do 1 hole in my good crystal as out of a pack of 20 drill bits, only 7 were good, (thanks China) so disappointed, I should of finished this today. I’ve ordered 5 more packs as they are cheap, £4.50 for 20 drill bits, as you get about 2 holes per pack so I will definitely will have enough. I will only do 4 holes and not 8 now as I’ve had enough of these dodgy drill bits, its going to take about 2 -3 weeks to arrive from china so in the mean time I will get a dressing block and maybe I can do something the these dodgy bits.
 
On a positive note, I’ve found an easy way how to get the wire in the hole, just flatten it out in a vice and it just slips in.

alan

  • Hero Member
  • *****
  • Posts: 716
Re: Bashar's Spacecraft Engine
« Reply #138 on: February 10, 2014, 12:02:56 AM »
Darryl Anka (born on October 12, 1951) started his Hollywood career as a special effects designer working on such films as Star Trek: The Motion Picture, I Robot, Pirates of the Caribbean, Live Free or Die Hard and Iron Man.[1]

Biggest bullshitter in town
If he really channels something, then it is a fallen angel/demon.

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #139 on: February 10, 2014, 08:16:13 AM »
Darryl Anka (born on October 12, 1951) started his Hollywood career as a special effects designer working on such films as Star Trek: The Motion Picture, I Robot, Pirates of the Caribbean, Live Free or Die Hard and Iron Man.[1]

Biggest bullshitter in town
If he really channels something, then it is a fallen angel/demon.



LOL


If he is a BSer don’t you think this device is a strange thing to imagine, as I thought I had a very wild imagination but I wouldn’t of thought of a device such as this?

alan

  • Hero Member
  • *****
  • Posts: 716
Re: Bashar's Spacecraft Engine
« Reply #140 on: February 10, 2014, 12:32:09 PM »

LOL


If he is a BSer don’t you think this device is a strange thing to imagine, as I thought I had a very wild imagination but I wouldn’t of thought of a device such as this?
If it is an alien, why won't he just land. Why has the "alien" an arabic name, the same name as like Assad?
Why are they so interested in religion and spirituality?
Imho it's a demon, which I know for a fact are real. :)

For we wrestle not against flesh and blood, but against principalities, against powers, against the rulers of the darkness of this world, against spiritual wickedness in high places.
Ephesians 6:12

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #141 on: February 14, 2014, 08:27:00 PM »
This is now complete, all the crystal wires are in contact with the rod, I have tested this with a meter and this device doesn’t work.

Hope

  • Hero Member
  • *****
  • Posts: 701
Re: Bashar's Spacecraft Engine
« Reply #142 on: February 16, 2014, 08:34:57 AM »
The smaller the hole the less damage there will be when the bit comes through the other side, also I might be able to fit more holes than 4 which could increase performance.
 
Bashar did say touch and penetrate, now I don’t know if he meant the wires should touch the outside of the crystal or that as the wire penetrates the crystal it should touch the sides or maybe both, but just in case I will do both.
 
When I drilled about a centimetre with the 1mm drill bit it seemed easy so I don’t foresee any problems, after all the drill bit must have been designed to drill that deep without snapping. 
 
When I do something I always like to do my best, I can’t expect anything else, it’s just the way I am unfortunately.
 
I have faith and lots of patients :)


if you place a tight fitting wooden rod through the center while drilling it should re-enforce the crystal can keep damage to a minimum.  If that doesn't work maybe a substance that does not expand when it is frozen placed it the center hole and frozen will keep the crystal better intact.


I have gotten side lined on my break down of the words.   Looks like you don't need them. 


This Randy Mills energy demo to me is very important and I am not seeing any scam there.  Just a  lot of proofs and one heck of a lot of energy output.    WTF your last disk work is awesome.   Work has been demanding and I will be giving more time here as I can.
 

Hope

  • Hero Member
  • *****
  • Posts: 701
Re: Bashar's Spacecraft Engine
« Reply #143 on: February 16, 2014, 08:48:17 AM »
Bashar did state that the energy collected is of a yet unknown nature.  I really don't think any measurement device has been built to measure the output.  A little time and let your mind work on this project.  Your work looks great, revisions are normal in known sciences.  Expect that even more so in an unknown field.

Uniqorn

  • Newbie
  • *
  • Posts: 28
Re: Bashar's Spacecraft Engine
« Reply #144 on: February 16, 2014, 11:46:01 PM »
WTF, once again, very good work. And very important too.

It is a pity that it hasn't yet worked in its current form. But don't pack up quite yet. I've made a lot of gadgets in my time. My general rule of thumb for making any one-off device is 1/3 design, 1/3 build and 1/3 tuning. These proportions can vary wildly, of course.

You are at the tuning stage. I think you have got everything as right as is possible according to Bashar's instructions.

I can suggest the two areas to tweek would be whether or not the sharp copper axial rod should be touching, or just near the copper hemisphere bowls. Also, should the rim of the hemispheres be near or touching the spiral mesh? What we don't know it the required precision of these parameters, so play with these before reaching a definitive conclusion.

Considering precision, is the crystal ball exactly on the equator (the plane of the spiral mesh). Ironically, 'Bashar's definition of 'exactly' is not exactly clear! :-) Does he mean within 0.2mm, 0.5mm, or maybe 2mm? I think once you have exhausted playing with these final parameters and others you may notice, you can either pack it in, or try free-experimenting to your hearts content.

@Hope, It's true there could be many unknown phenomena produced by this device, but my reading is that it should be producing sparks along the lines of a Van der Graph HV generator. (Along with any other surprises!)

Hope

  • Hero Member
  • *****
  • Posts: 701
Re: Bashar's Spacecraft Engine
« Reply #145 on: February 17, 2014, 01:33:55 AM »
Personally I would try two things,  first change the dielectrics (thick clear plastic disks u use now) to thin wax papers or thin nylon flexible cutting board and flip one of the disks over.  The N region of a magnet is thin so I would try to make the disks close.  Secondly, equal and opposite reactions is why I would try the reverse disk.  If energy is flowing in one direction it is also flowing in the other. 


The close disks should be very centered unless the latitude and longitude of where your at matters.
If old Ed Leeds was working with this he might even align the copper pole north and south.  No one ever said how they should or should not be oriented.


If the wavelength of the sparks are very high then they will not be visible as in the extreme ultra violet range.


If all this fails to produce anything what would you think of a central disk of thin iron magnetized from the center edge and outer edge rotating (just spin by hand to check for output to hemispheres)  This is a way out there suggestion,  but who knows if Bashar gave us everything. 



WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #146 on: February 17, 2014, 09:22:56 AM »
Bashar did say that the rod should be in contact with the hemispheres, but to make electrical contact I have to put a small amount of pressure on the hemispheres, maybe because the points are sharp so there’s not a lot of surface to make contact.
 
I have tried putting metal over the hemispheres to close the gap as to bring it closer, maybe not the same as having thinner insulating disks but I thought I might show something.
 
The crystal ball where the wires come out are exactly in the centre of the ball, I made a kind of jig for the drill to make sure the holes were in the correct positions, and where the wires come out is where the wire net is.
 
Hope
When you say flip one of the disks over, I take it you mean the wax paper discs, is there a difference with these papers to what side you have it? Aren’t they just paper.


Also I’m thinking how important the thickness of the insulating material is as he never mentioned the dimensions of it, but with the rest of the device he was very specific with the dimensions.
 
 
He also said if you get too close you would tap the energy, like to say you would be able to feel it.

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #147 on: February 17, 2014, 12:00:50 PM »
I think another problem could be the connection between the rod and wires because a little movement can disconnect them, I tried putting holes in the rod but it made the rod very weak.
At the moment I’m trying to make some kind of spring mechanism, but if you have some suggestions on this that would be helpful.

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #148 on: February 17, 2014, 05:26:11 PM »
I used the hot glue gun, so the wires are in good contact now, and being rubber its like a spring mechanism, but still not working.

WTF

  • Jr. Member
  • **
  • Posts: 79
Re: Bashar's Spacecraft Engine
« Reply #149 on: February 18, 2014, 07:58:36 AM »
Another reason this might not work is because the wires that go in the crystal need to be curved to continue the spiral.