Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Tesla's "COIL FOR ELECTRO-MAGNETS".  (Read 505575 times)

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #30 on: April 22, 2013, 02:42:45 AM »
Ah... I remembered another point from the original thread that I wanted to comment on.

AC electromagnets.

Yes.... you can get remarkable effects from AC electromagnets. If you place your poles right, you can levitate, that is, repel, non-ferrous metals like aluminum and copper. Some very fancy cooktops use this effect to levitate a frying pan while at the same time heating it by inductive power transfer.

But you can even levitate quite well using just plain 50 or 60 Hz line AC into a proper electromagnet, no other components necessary (except a Variac to control the power).

It is of course eddy current levitation; the pulsing field from the AC EM induces eddys in the metal, and the field from the eddys repels the field from the EM, and so the material gets pushed away from the EM.

If the pulsing field is at the right frequency and strength it will indeed induce an electric field across non-conductive bits of plastic, etc, and can cause them to be attracted to the EM (RF in this case).

synchro1

  • Hero Member
  • *****
  • Posts: 4720
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #31 on: April 22, 2013, 02:43:37 AM »
I wonder if I broadcast into an SB pancake antenna with a coventional C.B or Marine band radio, if I could drive a magnet with that frequency signal?
 
I believe the SBC spinner starts out as a pulse motor, then transitions to a synchronous a.c. motor powered by the SBC sine wave broadcast signal. The coil pulses one pole then the a.c phases in and drives both.

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #32 on: April 22, 2013, 03:01:11 AM »
TK:

I liked your Arduino "ringing the bell" inductance meter clip.  Really cool.

On the other hand I did not like your other clip where you used your frequency generator.  You have to factor in the fact that I have no bench to work on and I doubt I ever did that test.  Nonetheless, I see big issues with your clip.  You are "brute force" driving the LC resonator with a direct connection from the function generator right across the resonator.  So you are heavily loading it down with the 50-ohm impedance of your function generator and the L-C of the cable itself.   On your scope display when you are at resonance you clearly see the straight lines in the waveform.  So that's probably the capacitance discharging and charging through the the 50-ohm alternating square wave voltage from the function generator.  It doesn't give me a good feeling.

I always assumed that you would put something like a 1K resistance between the signal generator output and he LC resonator.  That pretty much isolates the LC resonator from the signal source and the signal source just "tickles" the resonator.   Then you set your function generator to output a sine wave and you look at the voltage across the LC resonator to look for the peak response.  As you sweep the frequency all that you see is a pure sine wave across the LC resonator.  That's the way I envisioned you were supposed to do it.

MileHigh

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #33 on: April 22, 2013, 03:02:48 AM »
@synchro:
Well.... CB is 30 MHz, approx 10 Meter wavelength band. Your oscillations will be too fast to "catch" anything physical like a magnet, I think. But try it, by all means.

@MH: I suppose you are technically correct. I usually do use a series resistance when I put the FG's output into a coil, but maybe I didn't in that video.
But I think that the primary effect of having the FG and the probes attached is to reduce the Q of the tank; the associated capacitances are so small that the resonant frequency isn't being altered that much. I think. Otherwise.... how could I have arrived at a final value for the inductance of the coil, that so closely agrees with its measured value using a commercial inductance meter?

"As you sweep the frequency all that you see is a pure sine wave across the LC resonator. " That's not true (in my experience), even if you use a pure sine wave as stimulation. You don't see the pure sinusoidal output until you are close to the resonant frequency _or a harmonic_.

Farmhand

  • Hero Member
  • *****
  • Posts: 1583
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #34 on: April 22, 2013, 03:11:44 AM »

Quote from: MileHigh on April 21, 2013, 10:47:19 PM
Quote
(snip)
I strongly disagree with you though about using a square wave to find he coil self-resonant frequency.  We are modelling the coil as a parallel LC circuit and looking for the frequency corresponding to the the highest impedance, correct?  So why would you want to pump multiple simultaneous frequencies into the parallel LC filter if you are looking for a single resonant frequency?  When you characterize any filter it is easier to do it with a sine wave representing one frequency only, and then sweep that frequency.

I am not saying that it's absolutely wrong to use a square wave, but you could get fooled and see what you think is a peak response which is happening due to a harmonic and not due to the fundamental.  It's just "cleaner" to sweep the filter with a sine wave.

(snip)


You might be interested to know how my Arduino-based inductance meter works. I illustrate its operation in a video. I also show in another video how to determine the resonant frequency of a coil.

While the resonant frequency of a tank does correspond to the highest input impedance of the circuit, that is not the parameter I am observing, because that is not the parameter of interest. I want to know the resonant frequency. Hence I look for the purity and amplitude of the _output_ signal produced in a "receiving" coil placed around or near the inductor of the tank circuit I am testing. Take a look at Farmhand's scopeshots to see how the spectral purity of the output cleans up and becomes sinusoidal, and then peaks in amplitude, at the exact resonant frequency. There is no doubt when you get to the right frequency.

But the Arduino does it a little differently, but still corresponding to the same thing, and _still_ using a sharp-edged fast risetime square wave pulse to do it. The Arduino places the inductor under test into a tank circuit with a 2 microFarad cap, then rings the tank by applying a single sharp pulse, then it isolates the tank and observes the ringdown voltage peaks, times them and determines the frequency, then finds the inductance by calculation. A tank rings down at its resonant frequency, and the higher the Q the more countable peaks you will get in the ringdown before you have to "hit the gong" with a sharp pulse again.
(But of course a properly resonant TC hits the gong on every cycle in exactly the right timing.)
http://www.youtube.com/watch?v=S6N8ys8FiA4
http://www.youtube.com/watch?v=alkfoX62Na0
Any Tesla coiler knows that the key to getting the proper HV VRSWR effect happening in the secondary, is to make the "driving pulse" in the primary to have the most rapid rise and fall times possible: a rectangular pulse, not a sine. This is why Tesla spent so much time on spark gaps, and why the spark gap is so critical to a proper performing TC. And it's why my MOT DC SGTC works so well: I use compressed air to blow out the spark gap, to decrease the rise and fall times of the primary current.

ETA: Looking at the tank directly, as in the videos above, rather than using a second pickup coil, produces the same results but for slightly different reasons.

Wow one sleep and so many comments.

The way I see it the square wave does not actually contain all harmonics, it "possibly" contains all harmonics, a square wave cannot actually be all frequencies at the same time.
If we take some french curves I'm sure we could draw all the harmonics within the square wave but that is just for the theory. To explain things.

I usually always use a square wave to find resonance for my Tesla coils or whatever other coils/transformers. Showing the harmonic was merely to show that the harmonics can be there and can be used. Although proper resonance is more useful. I think when we tune a Tesla coil we don't actually want it tuned spot on, we want it tuned so that when it loads up it becomes in tune, which is not necessarily max impedance or whatever. It's maximum voltage or output we want mostly. I tune for max output power with an output arrangement and max secondary voltage with Tesla coils ( when loaded). The primary of my spark gap Tesla coil is only resonant when the gap is conducting because it has no resonance tuning caps across the primary all the time, only when the cap is discharging. All the Q is in the secondary and extra coils. But if the primary capacitance on discharge is not correct to give the primary "LC resonance" at the correct frequency it won't work so well I use tuning coils to find the right tune for a given experiment. I use a high speed rotary gap of sorting bar design.

I will repeat the tests with a sniffer coil, but I foresee that any difference will be small and the same for both coils, as well as they will ring longer. I like to see the harmonics come together and the sine wave form and peak then the waveform after resonant point is usually pointy, anyway we get a feel for it.

My concern was that if a bifilar coil was used as a DC resonant charging inductor the self capacitance might hold energy in the coil, now that I think about it not such an issue. I can try it and compare since I have comparative coils I can test them in a few different situations.

I didn't aim for any particular frequency, I just found a piece of wire almost 10 meters long that I stripped off a transformer to even up windings and strung it out folded it in half and went from there. Any similarity with the frequency of my Tesla coils is just coincidence.

Yes I might test some magnet lift tests and such, but I don't expect to be using smooth DC much.

The thing I see with resonance is that in some situations or uses we may reduce Q and damp outputs with load or other ways but a coil tuned with a capacitance for a specific frequency is more responsive than one without.

I call that tuning the coils to resonance, even though when in use the Q might be gone and the waves damped.

In my accelerating under load video we can see the setup is loaded up by the coils harmonics which loads the driving motor, then when the load is applied the harmonics and the main wave are flattened, I used a rectifier as well, if I loaded the output coil without the rectifier the effect would have been more pronounced.

The use of a lower resonant frequency of a coil wound to have it is many.

Cheers

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #35 on: April 22, 2013, 03:14:00 AM »
Synchro1:

Your motor works on "near-field" magnetic fields generated by your drive coil, I am assuming that you are using an SB coil.  You are not operating in the "far-field" realm of radio wave transmission.  Plus the radio frequencies are too high relative to your spinning rotor.  That article you linked to on "Mechanical Antennas" is wrong.  A basic oscilloscope has more than enough bandwidth to allow you to analyze your motor.

MileHigh

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #36 on: April 22, 2013, 03:31:05 AM »
TK:

Quote
"As you sweep the frequency all that you see is a pure sine wave across the LC resonator. " That's not true (in my experience), even if you use a pure sine wave as stimulation. You don't see the pure sinusoidal output until you are close to the resonant frequency _or a harmonic_.

It's amazing how you can remember stuff from 30 years ago but you can't remember stuff from last year or last week.

I can't explain your observations because of the following:  If you start with a sine wave as stimulation, then you have no where else to go.  Your device under test has to respond with a sine wave at the same frequency (but not necessarily the same amplitude and phase.)  This presumes that the device under test consists of linear components.

The only way generate new frequencies, i.e.; "You don't see the pure sinusoidal output" is if your device under test has non-linear components in it, like a nasty diode.  I am assuming that the LC tank circuit is in general pretty damn linear.  So it's a mystery to me.

MileHigh

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #37 on: April 22, 2013, 03:31:25 AM »
But I think synchro is right about his motor: first it's working as a pulse motor, then it is working as a synchronous AC motor. Call it near-field EM or RF, whatever. The thing does not have to be "responding" to every cycle of the driving wave. The rotor magnet might be rotating at the tenth "subharmonic" of the applied EM or RF and still be getting a push from it.

At the higher speeds it's rotating for the same reason that the compass is rotating in this video. The line between "pulse motor" and "synchronous AC motor" is a fine, blurry line and you can define motors on either side of it.

http://www.youtube.com/watch?v=wd5w8KhYrQk

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #38 on: April 22, 2013, 03:48:39 AM »
TK:

Farmhand has a clip where I think you also observe a similar phenomenon.  I used the term "metastability."  The rotor will stabilize at a base frequency and possibly at one or more higher or lower frequencies for reasons akin to what you outlined.

I used the term "electro-mechanical impedance" for how a pulse motor might respond.  In that sense it's yet another "filter."  Just like a fancy analog filter might have multiple poles (resonance points) and zeros in the filter response, an electro-mechanical filter can also have it's poles and zeros.

MileHigh

Farmhand

  • Hero Member
  • *****
  • Posts: 1583
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #39 on: April 22, 2013, 03:57:39 AM »
But I think synchro is right about his motor: first it's working as a pulse motor, then it is working as a synchronous AC motor. Call it near-field EM or RF, whatever. The thing does not have to be "responding" to every cycle of the driving wave. The rotor magnet might be rotating at the tenth "subharmonic" of the applied EM or RF and still be getting a push from it.

At the higher speeds it's rotating for the same reason that the compass is rotating in this video. The line between "pulse motor" and "synchronous AC motor" is a fine, blurry line and you can define motors on either side of it.

http://www.youtube.com/watch?v=wd5w8KhYrQk

Glad you brought that up, I just thought of a pulse motor rotor design to make use of harmonics in an attraction kind of way.
I'll whip a sketch and post it with an explanation a bit later.

Just an idea as an experiment. I have got an optical sensor circuit for a pulse motor (to replace reeds) but I haven't used it with an appropriate
motor setup yet, I tested it with the dodgy coils I made for the acceleration generator video's, but I have bought different magnets and have better shafts now
so I may construct a new pulse motor as a fast spinner. I don't know when but I will probably be out of action for some time soon, if I don't post for a while
it's because of a medical issue, just thought I should mention that. Nothing to worry about, much.

Cheers

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #40 on: April 22, 2013, 04:01:08 AM »
TK:

It's amazing how you can remember stuff from 30 years ago but you can't remember stuff from last year or last week.

I can't explain your observations because of the following:  If you start with a sine wave as stimulation, then you have no where else to go.  Your device under test has to respond with a sine wave at the same frequency (but not necessarily the same amplitude and phase.)  This presumes that the device under test consists of linear components.

The only way generate new frequencies, i.e.; "You don't see the pure sinusoidal output" is if your device under test has non-linear components in it, like a nasty diode.  I am assuming that the LC tank circuit is in general pretty damn linear.  So it's a mystery to me.

MileHigh

You can get "beat note" rippling superimposed on the main sinusoidal output that happens at too long a time frame to show up on the average display of only a few cycles, and also higher frequencies that show up as a thickening of the trace line. But you are by and large correct, it's just a quibbly point.
However it's certain that using the square pulse produces the same eventual resonant frequency, and it's also true that the square pulse will often produce a measurable output when a sine wave at the same amplitude won't.

MileHigh

  • Hero Member
  • *****
  • Posts: 7600
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #41 on: April 22, 2013, 04:02:25 AM »
Farmhand:

FYI square waves, triangle waves, saw tooth waves, can all be broken down into their fundamental frequency and associcated harmonics.  Some waves have only odd harmonics, some even harmonics, some both.

http://en.wikipedia.org/wiki/Square_wave

MileHigh

P.S.:  The attached gif image is animated but I can't see it here, but I can see it on the Wiki entry.

Farmhand

  • Hero Member
  • *****
  • Posts: 1583
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #42 on: April 22, 2013, 04:49:36 AM »
Milehigh, Thanks for the tips with the Function generator, I was thinking of having a look inside, but it's handy in the I don't care too much if I damage it kinda way. I might have a look in there, I've got some temperature probes and non contact thermometers ect.

I do get what you're saying on the square waves and harmonics ect. and I agree you're right, if say you take the square and sine signals you see in the top diagram,
and fed a transformer or such like a Tesla coil with each one at the same amplitude the only difference will be the square wave input will give a higher amplitude resonant sine wave output than with the sine wave input and similarly a triangle wave will give less than a sine, just from memory. With some transformers the resulting sine wave from a square wave input can be a bit "off" shape but uniform when showing the amplitude peak, usually this happens when a core is used other than air. We can get very low frequency "beats" with two transformers almost identical but just a bit different in frequency.

So we can excite the coil with very sharp pulses and if the Q is good enough with no loading we might see only slight damping between the input events of a lower harmonic input frequency, the third harmonic is strong with a pulsed DC input, say for example my transformer is resonant at 750 kHz then if I excite it at somewhere around 250 kHz I can get a
strong and only slightly damped response at 750 kHz, that's basic stuff. I'm not a ham radio man or a full on "coiler", I'm a boilermaker experimenting as a hobby, I can't get too complicated, I don't have time.

I do very much appreciate everybody's input and I will try to respond to posts that are to me. I'll have to work back when I have time later.

Thanks all
Cheers

Farmhand

  • Hero Member
  • *****
  • Posts: 1583
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #43 on: April 22, 2013, 05:26:18 AM »
The optical sensor circuit I have can be used for snipping the center out of a wave ect. as well, "like coil shorting".
ie. I could run a regular pulse motor and use the sensor on an arc adjustment to load the generator coil at just the right moment.
A second circuit can work in burst mode also so it can short and open a coil several times for one trigger event.

Sensor module circuit is linked in the video description.
http://www.youtube.com/watch?v=GfkEv8oUUls

Here I test the generator as a motor, (the rotor is actually driving a universal motor shaft which it was mounted on) that is a fair bit of load,
plus as can be seen by the wave form the magnets seem to be inducing a lot in the motor coils or something. Anyway a much better and free spinning
pulse motor can be made with the optical sensor. The output of the optical sensor circuit goes to the switching circuit for the motor coils or to the loading switch.
EDIT: (this video is glitching for me at 9 seconds in, just skip to 12 seconds or something if it does that.)
http://www.youtube.com/watch?v=4mRVjbXNLBs

Or it can be used to load the resonant rise out of a gen coil maybe, which is what I would like to try some time.  ;)
Like make the gen coils resonant then load them just enough to clip the resonant rise off the top. For an experiment.

Forgot to mention the two circuits together can output a variable pulse width for the switches even though the input PW from the sensor is constant.

I'll try to find the drawing for the switching control section.

P.S. An RPR 220 optical sensor is worth about 75 cents and a CD4001 or 4011 chip is worth about 45 cents.
The most expensive parts are usually the mosfet driver chips which are not really necessary anyway I also used a CD 4047 chip to make the bursts.
That's the drawing I'm looking for.  :-[

...

Farmhand

  • Hero Member
  • *****
  • Posts: 1583
Re: Tesla's "COIL FOR ELECTRO-MAGNETS".
« Reply #44 on: April 22, 2013, 06:41:26 AM »
Just to add the idea I had before, see attachment pic.
The idea is that when harmonics are present in the motor or generator core the steel inserts might be attracted to them. Maybe a red herring.

Also the pic shows what I mean by using the serial connected bifilar coil as a charging inductor, when the current is interrupted in the charging inductor it
discharges it's energy into the second capacitor which builds a higher charge to discharge through the primary on the next cycle. The built up charge in the second capacitor
depends on the energy released from the charging inductor.

Cheers